FJEPGM5CZYL

specifications TM Small form factor fiber optic modules and connectors shall be compliant with the TIA FOCIS-6 Fiber Jack (FJ) interface specification. RJ-45 style module and connector shall be field terminable in one module space with no adapter. The fibers shall terminate in 2.5mm ferrules with non-optical disconnect and typical insertion loss of 0.1dB per connector. NETWORK CONNECTIVITY GROUP SPEC SHEET MINI-COM ® OPTI-JACK ® Fiber Optic Module — Multimode technical information OPTI-JACK Fiber Optic Module Fiber cable types: 3.0mm jacketed or 900µm buffered, works with 62.5/125µm or 50/125µm multimode Multimode: Ferrule type: Ceramic (Zirconia) Multimode: Insertion loss: 0.1dB typical Return loss: Greater than 20dB FJJGM5C** ™ OPTI-PLUG Fiber Optic Connector FJEPGM5C** Plug to Plug Coupler Plug to plug coupler: FJGCCEI (primarily used in testing) Termination Tooling key features and ...benefits Termination kit: Consumables kit: FJKITG FJKITG-RFB Small form factor connector Double the port density in one module space at the outlet and in the telecommunications closet Replacement Ferrules (Multimode) Proven 2.5mm ferrules Uses standard termination tools and procedures OPTI-JACK module: OPTI-PLUG connector: Robust design Protects fibers from mechanical and environmental stress Multimode Duplex Patch Cords Non-optical disconnect Maintains data transmission under tensile load RJ-45 form factor Familiar to end-users, snaps into all MINI-COM outlets and modular patch panels Field terminable module and connector Allows flexibility to assemble special length patch cords on site Adapterless Fewer components to order and inventory Flush mount Unused ports do not protrude from the wall; can be used with shuttered faceplates TIA standardization FOCIS-6 interface approved at the TIA, required for TIA/EIA-568-B.3 Keyed solution available Provides network security; limits access to highly sensitive, classified and segregated networks applications Fiber-to-the-desk: The OPTI-JACK fiber optic module is the ultimate desktop fiber connector. The 2.5mm ferrule provides robustness required for this demanding environment. The FJ interface module and connector design is familiar to the end user and is polarized to prevent mismatch of transmit and receive cables. Because there is no adapter, unused ports remain flush with the wall and away from damage. Shuttered faceplates can be used for further protection of the unused ports. The modularity with copper connectors allows for the complete data-communications solution to every workstation in one outlet. Keyed network security: Four color-coded, keyed configurations of the module and connector are available to provide mechanical and visual differentiation to prevent unintentional insertion into adjacent ports. Provides network security for military, government, financial and educational applications. Universal keyed connector available for testing purposes. Telecommunications closet: The high port density of the OPTI-JACK module reduces the space requirements for fiber terminations in the closet. This allows the end user to use less rack space and purchase fewer fiber enclosures. The multiple color options allow color coding of different networks or areas of the building for easier troubleshooting. V i s i t o u r w e b s i t e a t : w w w. p a n d u i t . c o m / n c g OPTI-PLUG connector to OPTI-PLUG connector: OPTI-PLUG connector to OPTI-JACK module: OPTI-PLUG connector to SC: OPTI-PLUG connector to ST: OPTI-PLUG connector to FC: OPTI-PLUG connector (Keyed W) to SC: OPTI-PLUG connector (Keyed W) to ST: FJJFRL-X FJEPFRL-X F^D6P-6PM‡ F^D6P-6JM‡ F^D6P-3M‡ F^D6P-2M‡ F^D6P-4M‡ F^D6PW-3M‡ F^D6PW-2M‡ All key type (W, X, Y, Z) patch cords available ^Available in 62.5/125µm (6) and 50/125µm (5) ‡Available in 1, 2, 3 and 10 meters **Substitute for Colors: EI = Electric Ivory BL = Black BU = Blue IW = Off White OR = Orange WH = White Keyed Colors: WBL = Keyed W in Black XRD = Keyed X in Red YOR = Keyed Y in Orange ZYL = Keyed Z in Yellow “X” = Bag of 10 ferrules and crimp sleeves installer tip A-B polarity easily reversed by removing module cover. MINI-COM ® OPTI-JACK ® Fiber Optic Module — Multimode Standards Compliant Connector Performance TIA 455 ISO/IEC 874-1 Description Test Procedure and TIA/EIA-568-B.3 Required Performance Performance After Test 1 -- Flex 100 cycles; -180 to 180 degrees; max. insertion loss 0.75dB, min. return loss 20dB