FLCDSBUY

LC Fiber Optic Connectors S P E C I F I C AT I O N S H E E T specifications LC small form factor (SFF) field polish connectors with rear pivot latch shall be TIA/EIA-604 FOCIS-10 compatible. LC simplex and duplex connectors shall be field terminable. The fibers shall terminate in 1.25mm ceramic ferrules with non-optical disconnect functionality and an average insertion loss of 0.1dB per mated pair for multimode and singlemode fiber. technical information Standards requirements: TIA/EIA-604 FOCIS-10 compatible; exceeds TIA/EIA-568-B.3 requirements Fiber compatibility: 62.5/125μm OM1, 50/125μm OM2,10Gig™ 50/125μm laser optimized OM3/OM4 and 9/125μm OS1 Fiber cable type: 900μm tight-buffered fiber recommended 250μm coated fiber, by using F250BT-C 250 micron fiber build-up tube kit or FO6CB or FO12CB fan-out kit Jacketed cable size: 1.6mm – 2.0mm jacketed cable Ferrule type: Zirconia ceramic Insertion loss: 0.1dB average (multimode and singlemode) Return loss: >20dB (multimode), >40dB (singlemode) key features and benefits Rear pivot latch design, robust construction Longer beam reduces deflection during mating and unmating to reduce latch fatigue, leading to longer cycle life Anti-snag latch Low profile latch resists cable snagging Wide “positive grip” thumb latch Multi-grooved, full body width thumb latch improves grip for better control during matings/unmatings; promotes fast, easy MACs (moves, adds, changes) in high-density applications Audible “click” upon Provides user with a definitive signal of successful connector mating Field installable duplex Allows fast, easy field polarity changes without tools; quick identification of polarity One connector body design for both simplex A single connector design is used for both simplex and duplex patch cords and inside the wall applications to simplify installation Protective cap locks onto connector latch with audible “click” Protective cap automatically locks onto connector latch, completely covering connector end; prevents ferrule end face damage by providing protection from contamination and impact Anaerobic adhesive field installation Simplifies and reduces installation time by 50% compared to heat cured epoxy terminations; curing oven/time not required Rugged body construction Stable performance under side loads for improved reliability Independent free-floating ferrules Ensures physical fiber contact for consistent low return loss, unlike unitary multi-fiber ferrule connectors successful mating clip with integrated polarity markers and duplex applications 1.25mm ceramic ferrules Provide the highest durability for repeated matings applications Panduit LC Fiber Optic Connectors provide a rugged solution for high-density telecommunication rooms, LANs, public networks and fiber-to-the-desk applications. LC simplex and duplex connectors are used for equipment cross-connects or interconnects in backbone, horizontal and w w w. p a n d u it.co m work area applications for high-speed data transmissions. The high-density design and 1.25mm ferrules double the port density (compared to SC connectors) to reduce space requirements on racks, enclosures, panels and faceplates. LC Simplex Fiber Optic Connectors for 900μm Buffered Fiber and 1.6mm – 2.0mm Jacketed Cable OM1 Multimode: FLCSMEIY OM2, OM3, OM4 Multimode: FLCSMBLY OS2 Singlemode: FLCSSBUY LC Simplex Fiber Optic Connectors for 3.0mm Jacketed Cable OM1 Multimode: FLCSM3.0EI OM2, OM3, OM4 Multimode: FLCSM3.0BL OS2 Singlemode: FLCSS3.0BU LC Duplex Fiber Optic Connectors for 900μm Buffered Fiber MOM1 Multimode: FLCDM900EIY OM2, OM3, OM4 Multimode: FLCDM900BLY OS2 Singlemode: FLCDS900BUY LC Duplex Fiber Optic Connectors for 1.6mm – 2.0mm Jacketed Cable OM1 Multimode: FLCDMEIY OM2, OM3, OM4 Multimode: FLCDMBLY OS2 Singlemode: FLCDSBUY LC Duplex Fiber Optic Connectors for 3.0mm Jacketed Cable OM1 Multimode: FLCDM3.0EI OM2, OM3, OM4 Multimode: FLCDM3.0BL OS2 Singlemode: FLCDS3.0BU Mini-Com ® Sr./Jr. LC Adapter Modules 1Duplex MM: CMDJLC** Duplex 10 GbE (zirc.): CMDJAQLCZBL Duplex SM (zirc.): CMDJLCZ** For Sr./Sr., replace J in part number with S. Opticom ® LC Fiber Adapter Panels 16 duplex 10 GbE (zirc.): FAP6WAQDLCZ 6 duplex MM: FAP6WEIDLC 6 duplex SM (zirc.): FAP6WBUDLCZ 12 duplex MM: FAP12WEIDLC 12 simplex SM (zirc.): FAP12WBULCZ QuickNet ™ MTP* Cassettes 6 LC to MTP* (12f): FC^-12-10Y 12 LC to 2 MTP* (24f): FC^-24-10Y QuickNet ™ Optimized 10 GbE MTP* Cassettes 6 LC to MTP* (12f): FCXO-12-10Y 12 LC to 2 MTP* (24f): FCXO-24-10Y Opti-Core ® Fiber Optic Patch Cords Duplex LC to LC: F^E10-10M‡Y Simplex LC to LC: F^F10-10M‡Y Duplex SC to LC: F^E3-10M‡Y Simplex SC to LC: F^F3-10M‡Y Simplex LC to pigtail: F^B10-NM‡Y LC Termination Tooling 110V termination kit: FIELDKIT 230V termination kit: FIELDKIT-G Refurbishment kit: FIELDKITRFB HD Connector Removal Tool For LC and SC: HDCRT LC Lock-in Duplex Clip LC lock-in duplex clip: FLCCLIW-X **Substitute for module color: EI = Electric Ivory BU = Blue IG = International Gray WH = White TG = Technical Gray BL = Black AW = Arctic White W = Off White EW = European White ^Substitute for fiber type: Z (OM4-10 GbE 50/125μm), X (OM3-10 GbE 50/125μm), 5 (OM2-50/125μm), 6 (OM1-62.5/125μm) or 9 (OS1-9/125μm). ‡Substitute for length in meters: 1, 2, 3, 5 or 10 for patch cords, and 1, 2 or 3 for pigtails; singlemode patch cords are also available in 12, 15, 25 or 30 meter lengths. Contact Customer Service for other available lengths. LC Fiber Optic Connectors performance information Test Parameter Description Result Qualification test suite (TIA/EIA-568-B.3 requirements) Complete testing protocol per TIA/EIA-568-B.3 using TIA/EIA FOTPs that include mechanical, environmental and optical test sequences Compliant; exceeds TIA/EIA-568-B.3 requirements Connector intermatability Dimensional and material compliance to TIA/EIA standards All connectors are FOCIS compatible with TIA/EIA-604-3 selection information Part Number Connector Type Cable Type FLCSMEIY Simplex 900μm buffered fiber and 1.6mm – 2.0mm jacketed cable FLCSM3.0EI Simplex FLCDMEIY Duplex FLCDM900EIY Duplex 3.0mm jacketed cable 1.6mm – 2.0mm jacketed cable 900μm buffered fiber FLCDM3.0EI Duplex 3.0mm jacketed cable FLCSMBLY Simplex 900μm buffered fiber and 1.6mm – 2.0mm jacketed cable FLCSM3.0BL Simplex 3.0mm jacketed cable FLCDMBLY Duplex 1.6mm – 2.0mm jacketed cable FLCDM900BLY Duplex 900μm buffered fiber FLCDM3.0BL Duplex 3.0mm jacketed cable FLCSSBUY Simplex 900μm buffered fiber and 1.6mm – 2.0mm jacketed cable FLCSS3.0BU Simplex 3.0mm jacketed cable FLCDSBUY Duplex 1.6mm – 2.0mm jacketed cable FLCDS900BUY Duplex FLCDS3.0BU Duplex Fiber Ferrule Housing Color Boot Color Average Insertion Loss** Return Loss OM1 Multimode Zirconia Ceramic Electric Ivory Electric Ivory 0.1dB >20 OM2, OM3, OM4 Multimode Zirconia Ceramic Black Aqua 0.1dB >20 Blue Blue 0.1dB >40 Singlemode 900μm buffered fiber Zirconia Ceramic 3.0mm jacketed cable *All connector insertion loss values calculated from tests taken with precision launch jumper assemblies per TIA/EIA-FOTP-171. F or 900 µm B uffered F iber 1.60 [40.6] LC S implex C onnectors 1.6 mm – 2.0 mm J acketed C able FLCDM900EIY, FLCDS900BUY 1.86 [47.2] FLCSM3.0EI, FLCSS3.0BU LC D uplex C onnectors F or 1.6 mm – 2.0 mm J acketed C able 0.25 [6.35] 1.60 [40.6] F or 3.0 mm J acketed C able 1.86 [47.2] FLCSMEIY, FLCSSBUY F or 900 µm B uffered F iber 0.25 [6.35] or F or 3.0 mm J acketed C able 0.25 [6.35] 1.86 [47.2] FLCDMEIY, FLCDSBUY Dimensions are in inches [Dimensions in brackets are in millimeters]. 1.86 [47.2] FLCDM3.0EI, FLCDS3.0BU WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800.777.3300 ©2015 Panduit Corp. ALL RIGHTS RESERVED. FBSP13--WW-ENG 3/2015