FLCSMC6EOR

Keyed LC OptiCam ® Pre-Polished Fiber Optic Connectors SPECIFICATION SHEET specifications Keyed LC small form factor (SFF) pre-polished connectors shall exceed TIA/EIA-568-B.3 performance requirements, and contain a factory-terminated fiber, eliminating field polishing and adhesive. Keyed LC pre-polished connectors shall be mechanically keyed with color-specific positive and negative keying features to prevent unintentional mating with unlike keyed or non-keyed adapters. Keyed LC pre-polished connectors shall have an average insertion loss 0.3dB per mated pair for multimode and singlemode fiber. Keyed LC pre-polished connectors shall captivate fiber and buffer in one action allowing for up to two re-terminations with no degradation in performance. Keyed LC OptiCam ® Pre-Polished Multimode Simplex Connectors Keyed A (black): FLCSMC^ABL Keyed B (red): FLCSMC^BRD Keyed C (green): FLCSMC^CGR Keyed D (yellow): FLCSMC^DYL Keyed E (orange): FLCSMC^EOR Keyed F (dark blue): FLCSMC^FDB Keyed LC OptiCam ® Pre-Polished Singlemode Simplex Connectors technical information Standards requirements: Exceed TIA/EIA-568-B.3 performance requirements Fiber compatibility: 62.5/125µm OM1, 50/125µm OM2, 50/125µm OM3/OM4, 9/125µm OS1/OS2 Fiber size and type: 900µm tight-buffered fiber 250µm coated fiber, by using F250BT-C 250 micron fiber build-up tube kit or FO6CB or FO12CB fan-out kit Jacketed cable size: 1.6mm – 2.0mm and 3.0mm jacketed cable with optional boots Ferrule type: Zirconia ceramic with a pre-polished fiber stub Insertion loss: 0.3dB average (multimode and singlemode) Return loss: >20dB (multimode), >26dB (10Gig ™ multimode), >50dB (singlemode) Keyed A (black): Keyed B (red): Keyed C (green): Keyed D (yellow): Keyed E (orange): Keyed F (dark blue): FLCSSCABL FLCSSCBRD FLCSSCCGR FLCSSCDYL FLCSSCEOR FLCSSCFDB OptiCam ® 1.6/2.0mm Boots Black boots: FMCBT2BL-X* OptiCam ® 3.0mm Boots Black boots: FMCBT3BL-X* *X = Bag of 10 Boots; 100 per carton. key features and benefits Color-specific keys with positive and negative keying features Mechanically and visually distinguish connections to prevent unintentional insertion into unlike keyed or non-keyed ports, allow network design flexibility and versatility, and accommodate more discrete networks Factory pre-polished fiber stub endface Eliminates inconsistent and time-consuming field polishing to deliver required optical performance; reduces termination time (less than half the time of field polish connectors) and the number of installation tools required Dual cam design with fiber and buffer clamps Keyed LC Mini-Com ® Duplex Adapter Modules (Ceramic Split Sleeves) Secures both the fiber and the buffer during the camming step to facilitate consistent termination results; reduces the termination time compared to conventional termination methods Allows up to two re-terminations to achieve optimum termination results; reduces the number of rejected connectors and terminations to provide yield rates approaching 100% for lower installed costs Translucent housing assembly (laser marked) Facilitates inspection of the fiber termination quality, resulting in rapid installations, improved termination yields, and lower installed costs; laser marked to identify fiber stub fiber type (9µm, 62.5, 50, or 50X) Non-optical disconnect design Maintains data transmission under tensile loads for jacketed cable Universal termination tool with integrated visual termination indicator (VTI) Ensures fast, consistent, and optimal terminations of all OptiCam ® Connectors with connector specific cradles; offers visual indication of proper termination after the cam step has been completed to virtually eliminate operator error to deliver a lower installed cost w w w. p a n d u i t . c o m Keyed A (black): Keyed B (red): Keyed C (green): Keyed D (yellow): Keyed E (orange): Keyed F (dark blue): CMDABLLCZ** CMDBRDLCZ** CMDCGRLCZ** CMDDYLLCZ** CMDEORLCZ** CMDFDBLCZ** Keyed LC Opticom ® Fiber Adapter Panels (Ceramic Split Sleeves) Keyed A (black): FAP‡WABLDLCZ Keyed B (red): FAP‡WBRDDLCZ Keyed C (green): FAP‡WCGRDLCZ Keyed D (yellow): FAP‡WDYLDLCZ Keyed E (orange): FAP‡WEORDLCZ Keyed F (dark blue): FAP‡WFDBDLCZ LC Lock-in Duplex Clip LC lock-in FLCCLIW-X duplex clip: applications Secure networks require a level of visual and mechanical differentiation, and physical layer security that conventional LC connector solutions cannot provide. Typical applications for Keyed LC OptiCam® Connectors include maintenance or emergency restoration of secure fiber networks and retrofit/initial install of behind the wall (BTW) connections and the permanent side of interconnect OptiCam ® Termination Tooling OptiCam ® Termination Kit: FCAMKIT OptiCam ® Conversion Kit (upgrades Opti-Crimp ® Kit to also terminate OptiCam ® Connectors): FPPKIT-CVY Field polish kit upgrade (upgrades field polish kit to also terminate OptiCam ® Connectors): FIELDKITUPG LC cradles (2 per pkg.): FLCC and cross-connect patch fields. Keyed LC OptiCam Connectors eliminate the need for endface polishing and adhesive, enabling faster deployment, especially in remote areas and confined spaces. The hand-held OptiCam® Termination Tool gives installers the flexibility to terminate in very close proximity to the application without having to switch tools or find benchtop space. ® ^Substitute for fiber type: 6 = 62.5/125µm OM1, 5 = 50/125µm OM2, X = 10Gig ™ 50/125µm OM3/OM4 or 9 = 9/125µm OS1/OS2. **Substitute for module color: AW for Arctic White, BL for Black, BU for Blue, EI for Electric Ivory, or IW for Off White. ‡Substitute for number of adapters: 6, 8, or 12. Keyed LC OptiCam ® Pre-Polished Fiber Optic Connectors performance information Test Parameter Qualification test suite (TIA/EIA-568-B.3 requirements) Repeated mating Cable retention (straight pull): 900µm tight-buffered fiber Jacketed cable Description Complete testing protocol per TIA/EIA-568-B.3 using TIA/EIA FOTPs that include mechanical, environmental, and optical test sequences 500 mate/unmate cycles Max. insertion loss: 0.75dB Min. return loss: 20dB TIA/EIA-568-B.3 requirement: 0.5 lbs. load applied with 26dB >20dB >20dB >50dB >26dB >20dB >20dB >50dB >26dB >20dB >20dB >50dB >26dB >20dB >20dB >50dB >26dB >20dB >20dB >50dB Keyed LC Mini-Com ® Fiber Optic Adapter Modules Keyed LC Opticom ® Fiber Adapter Panels (FAPs) Keyed LC Opti-Core ® Patch Cords and Pigtails LC Lock-In Duplex Clip CMD***LCZIW FAP6W***DLCZ F^E10 ▲ -10▲M‡ FLCCLIW-X ***Substitute for key type and color: ABL for A – Black, BRD for B – Red, CGR for C – Green, DYL for D – Yellow, EOR for E – Orange, or FDB for F – Dark Blue. ^Substitute for fiber type: 6 = 62.5/125µm OM1, 5 = 50/125µm OM2, X = 10Gig ™ 50/125µm OM3/OM4 or 9 = 9/125µm OS1/OS2. ▲ Substitute for key type and color: A for A – Black, B for B – Red, C for C – Green, D for D – Yellow, E for E – Orange, or F for F – Dark Blue. ‡Substitute for length in meters: 1 – 10, 15, 20 or 30. Contact Customer Service for other available lengths or universal reference patch cords. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Jalisco, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800-777-3300 and reference FBSP30 ©2009 PANDUIT Corp. ALL RIGHTS RESERVED. WW-FBSP30 9/2009