FSCM2.0BL

SC Fiber Optic Connectors S P E C I F I C AT I O N S H E E T SC Simplex Fiber Optic Connectors for 900μm Buffered Fiber and 3.0mm Jacketed Cable specifications SC field polish connectors are TIA/EIA-604 FOCIS-3 compliant. SC simplex and duplex connectors are field terminable. The fibers shall terminate in 2.5mm ceramic ferrules with non-optical disconnect functionality and an average insertion loss of 0.1dB (multimode) and 0.15dB (singlemode) per mated pair. technical information Standards requirements: TIA/EIA-604 FOCIS-3 compliant; exceeds TIA/EIA-568-B.3 requirements Fiber compatibility: 62.5/125μm OM1, 50/125μm OM2, 10Gig™ 50/125μm laser optimized OM3/OM4 and 9/125μm OS1/OS2 Fiber cable type: 900μm tight-buffered cable recommended Fiber cable size: 3.0mm or 1.6mm – 2.0mm jacketed cable Ferrule type: Zirconia ceramic ferrule Insertion loss: 0.1dB average (multimode), 0.15dB (singlemode) Return loss: >20dB (multimode), >40dB (singlemode) key features and benefits Free floating housing Ensures complete latching even when inserted by the boot; valuable in high-density spacing applications Pre-assembled inner inner housing Fewer parts simplifies assembly and reduces installer error for lower installed cost Full length adhesive fill tube Prevents adhesive from entering internal cavity of connector to reduce installer error Non-optical disconnect Maintains data transmission under tensile loads for jacketed cable for network reliability Anaerobic adhesive field installation Simplifies and reduces installation time by 50% compared to heat cured epoxy terminations; curing oven/time not required High temperature thermoplastic design Allows use of high glass transition temperature epoxies with cure temperatures up to 150°C (302°F) Simplex available with 900μm and 3.0mm or 1.6 – 2.0mm boots One connector part number for both fiber types for easier ordering and stocking Standard 2.5mm ceramic ferrules Provide the highest durability for repeated matings Multimode (black boots): FSCM5BL Multimode (black boots): FSCMBL Multimode (red boots): FSCMRD Singlemode (blue boots): FSCSBU SC Simplex Fiber Optic Connectors for 900μm Buffered Fiber and 1.6mm – 2.0mm Jacketed Cable Multimode (black boots): FSCM2.05BL Multimode (black boots): FSCM2.0BL Multimode (red boots): FSCM2.0RD Singlemode (blue boots): FSCS2.0BU SC Duplex Fiber Optic Connectors for 3.0mm Jacketed Cable Multimode (black boots) FSCDM5BL Multimode (black/red): FSCDM SC Fiber Optic Adapters Duplex MM: Duplex MM: Duplex 10Gig™(zirc): Simplex SM (zirc): Simplex APC (zirc): L = Bag of 50 adapters; 100 per carton. Mini-Com ® SC Adapter Modules Duplex MM: Duplex MM: Duplex 10Gig™ (zirc.): Simplex SM (zirc): Simplex APC (zirc): Panduit SC Fiber Optic Connectors are used for equipment cross-connects or interconnects in backbone, horizontal and work area applications. SC connectors are recommended by TIA/EIA-568-B.3 at the wall outlet and the telecommunications closet. w w w. p a n d u it.co m Multimode connectors provide a robust and easy to terminate solution for lower cost fiber-to-thedesk applications. Singlemode connectors provide added bandwidth capacity for data hungry applications. CMDEISCEI CMDBLSCBL CMSBUSCZBU CMSBUSCZBU CMSAGSCZBL Opticom ® SC Fiber Adapter Panels 6 duplex MM: FAP6WEIDSC 6 duplex MM: FAP6WBLDSC 6 duplex 10Gig™: FAP6WAQDSCZ 6 duplex SM (zirc.): FAP6WBUDSCZ 12 simplex SM (zirc.): FAP12WBUSCZ Opticom ® QuickNet ™ Pre-Terminated MTP* Cassettes 12 SC to MTP* (12f): FC^-12-3S 6 SC to MTP* (12f): FC^-12-3 Opti-Core ® Fiber Optic Patch Cords Duplex SC to SC: F^D3-3M‡ Simplex SC to SC: F^S3-3M‡ Simplex SC to pigtail: F^B3-NM‡ SC Termination Tooling Termination kit: FJKITG Refurbishment kit: FJKITG-RFB Additional Components for Singlemode 1μm diamond film: FPF1-V 0.05μm lapping film: FLCFPLF-X HD Connector Removal Tool For LC and SC: applications FADSCEI-L FADSCBL-L FADSCZAQ-L FASSCZBU-L FASSCZAG-L PCRT1 Substitute for module color: EI = Electric Ivory BU = Blue IG = International Gray WH = White TG = Technical Gray BL = Black AW = Arctic White IW = Off White EW = European White ^Substitute for fiber type: X (OM3/OM4 – 10Gig™ 50/125μm), 5 (OM2 – 50/125μm), 6 (OM1 – 62.5/125μm) or 9 (OS1/OS2 – 9/125μm). ‡Substitute for length in meters: 1, 2, 3, 5 or 10 for patch cords, and 1, 2 or 3 for pigtails; singlemode patch cords are also available in 12,15, 25 or 30 meter lengths. Contact Customer Service for other available lengths. SC Fiber Optic Connectors performance information Test Parameter Description Result Qualification test suite (TIA/EIA-568-B.3 requirements) Complete testing protocol per TIA/EIA-568-B.3 using TIA/EIA FOTPs that include mechanical, environmental and optical test sequences Compliant; exceeds TIA/EIA-568-B.3 requirements Connector intermatability Dimensional and material compliance to TIA/EIA standards All connectors are FOCIS compliant with TIA/EIA-604-3 selection information Part Number Connector Type Cable Type Fiber Ferrule Housing Color Boot Color FSCM5BL Simplex 900µm buffered fiber and 3.0mm jacketed cable Black Black FSCM2.05BL Simplex 900 micron buffered fiber and 1.6 – 2.0mm jacketed cable FSCDM5BL Duplex FSCMBL Simplex 900μm buffered fiber and 3.0mm jacketed cable FSCMRD Simplex 900μm buffered fiber and 3.0mm jacketed cable FSCM2.0BL Simplex 900μm buffered fiber and 1.6mm – 2.0mm jacketed cable Black FSCM2.0RD Simplex 900μm buffered fiber and 1.6mm – 2.0mm jacketed cable Red FSCDM Duplex 3.0mm jacketed cable Red and Black FSCSBU Simplex 900μm buffered fiber and 3.0mm jacketed cable FSCS2.0BU Simplex 900μm buffered fiber and 1.6mm – 2.0mm jacketed cable Average Insertion Loss* Return Loss 0.1dB >20 0.15dB >40 3.0mm jacketed cable Multimode Singlemode Zirconia Ceramic Zirconia Ceramic Electric Ivory Red Blue Blue *All connector insertion loss values calculated from tests taken with precision launch jumper assemblies per TIA/EIA-FOTP-171. SC Simplex Connectors SC Duplex Connector For 900µm Fiber and 3.0mm Jacketed Cable For 3.0mm Jacketed Cable 1.93 [49.0] FSCMBL, FSCMRD, FSCSBU 2.20 [55.9] For 900µm Fiber and 1.6mm – 2.0mm Jacketed Cable 2.20 [55.9] 1.93 [49.0] FSCDM 2.20 [55.9] FSCM2.0BL, FSCM2.0RD, FSCS2.0BU Dimensions are in inches [Dimensions in brackets are in millimeters]. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800.777.3300 ©2015 Panduit Corp. ALL RIGHTS RESERVED. FBSP15--WW-ENG 3/2015