FXD3-3M1Y

Opticom ® QuickNet ™ Rack Mount Fiber Cassette Enclosures SPECIFICATION SHEET specifications The fiber cassette enclosure shall house, organize, manage and protect fiber optic cable, terminations, splices, connectors and patch cords. Enclosure shall accommodate all Panduit pre-terminated MTP* cassettes, fiber adapter panels (FAP) and fiber mount panels (FMP), and associated trunk cables, connectors and patch cords, and shall include integral cable management and bend radius control for transition to vertical cable managers. Fiber optic enclosure shall be constructed of steel material. Molded front and rear doors shall be removable for cabling and connector access and installation. A flat front door shall enable access to fiber without moving the drawer. Enclosure shall provide full front access with a drawer that slides out and tilts down regardless of how many enclosures are stacked together. 1 RU enclosure shall be available in an open-access version which allows patch cord access from both top and bottom of the enclosure housing. Enclosure shall have multiple knockouts for a variety of trunk cable entry points. technical information Dimensions: FCE1U, FCE1UA: 1.72"H x 17.6"W x 16.8"D (43.8mm x 447mm x 426.5mm), 1 RU 3.47"H x 17.6"W x 16.8"D (88.2mm x 447mm x 426.5mm), 2 RU 6.8"H x 17.6"W x 16.8"D (172.7mm x 447mm x 426.4mm), 4 RU FCE2U: FCE4U: Mounting: Integral mounting flange for installation in 19" wide EIA-310 racks Accessories: Mounting hardware and accessory kit with labels included key features and benefits Modular design mounts up to 4 Opticom ® QuickNet ™Cassettes or FAPs per RU Provides higher patch field density in fewer rack units saving valuable space Works with all Panduit ® Opticom ® QuickNet ™ Fiber Optic Cassettes and Fiber Adapter Panels Provides versatility and flexibility with a fully modular solution for a variety of pre-terminated installations, FAP and field termination, and splicing installations. Works with all Panduit LC, SC, ST, MT-RJ and MTP* fiber adapter panels and cassettes Hinged, swing down front door Enables access to fiber optic patch cords without needing to move drawer for easier moves, adds, and changes; enables stacking for reduced real estate Slide-out, tilt-down drawer Offers total front access to all patch cords and rear cables for in-cabinet and top-of-rack mounting locations Integral cable management Ensures proper cable routing, bend radius control, and rear slack storage for all patch cords, interconnect cables, and trunk cables New fiber optic splice module Can fusion splice up to 96 fibers per RU in a single enclosure with one-to-one splice-to-patching ratio Standards-based, mechanically printed labeling of fiber connectivity, patchfields, and enclosures enables clear and accurate labeling for easy moves, adds and changes TIA-606-A compatible labeling applications Opticom ® QuickNet ™ Rack Mount Fiber Cassette Enclosures provide a system for managing fiber terminations, connections, and patching in all types of applications. The enclosures are a component of the Opticom ® QuickNet ™ Fiber Cabling System. They are ideal for fast, reliable patch field creation in cross-connect or inter-connect main distribution areas (MDA) or horizontal distribution areas (HDA) for storage area network (SAN) patching. The enclosure can also serve as a transition point for *MTP is a registered trademark of US Conec Ltd. w w w. p a n d u i t . c o m pre-terminated MTP* interconnect or trunk cables patched to active equipment in data center server cabinets or LAN switch racks. The enclosures provide high patch field densities with the FCE1U housing up to 96 fibers in 1 RU, the FCE2U housing up to 192 fibers in 2 RU, and the FCE4U housing up to 288 fibers in 4 RU. Integral cable management, bend radius control, and slack management features protect fiber optic cables, patch cords, and connectors to ensure end-to-end signal integrity. Opticom ®QuickNet ™ Rack Mount Fiber Cassette Enclosures 1 RU for 4 FAPs or FCE1U cassettes: 1 RU for 4 FAPs or cassettes, open access: FCE1UA 2 RU for 8 FAPs or FCE2U cassettes: 4 RU for 12 FAPs or FCE4U cassettes: Opticom ® QuickNet ™ Cassettes Optimized 10Gig ™ 50/125µm OM3/OM4 Multimode Fiber 12 duplex LC to 2 MTP*: FCXO-24-10Y 6 duplex LC to 1 MTP*: FCXO-12-10Y 6 duplex SC to 1 MTP*: FCXO-12-3Y Opticom ® QuickNet ™ Cassettes 10Gig ™ 50/125µm OM3/OM4 Multimode Fiber 12 duplex LC to 2 MTP*: FCX-24-10Y 6 duplex LC to 1 MTP*: FCX-12-10Y 6 duplex SC to 1 MTP*: FCX-12-3Y Opticom ® QuickNet ™ Cassettes 50/125µm OM2 Multimode Fiber 12 duplex LC to 2 MTP*: FC5-24-10Y 6 duplex LC to 1 MTP*: FC5-12-10Y 6 duplex SC to 1 MTP*: FC5-12-3Y Opticom ® QuickNet ™ Cassettes 9/125µm OS1 Singlemode Fiber 12 duplex LC to 2 MTP*: FC9-24-10Y 6 duplex LC to 1 MTP*: FC9-12-10Y 6 duplex SC to 1 MTP*: FC9-12-3Y Opticom ® Fiber Adapter Panels 12 duplex LC, 10Gig ™: FAP12WAQDLC 6 duplex LC, 10Gig ™: FAP6WAQDLC 12 duplex LC: FAP12WEIDLC 6 duplex LC: FAP6WEIDLC ™ 6 duplex SC, 10Gig : FAP6WAQDSC ™ 3 duplex SC, 10Gig : FAP3WAQDSC 6 duplex SC: FAP6WEIDSC 3 duplex SC: FAP3WEIDSC 6 simplex ST: FAP6WST 6 duplex MT-RJ: FMP6WMTRJ Opti-Core ® Patch Cords 12 fiber MTP* to MTP*: F^12D5-5M**Y Duplex LC to LC: F^E10-10M**Y Duplex SC to SC: F^D3-3M**Y Duplex SC to LC: F^D3-10M**Y Splice Modules and Holders Splice module (fusion): FOSMF Splice module FOSMM (mechanical): Splice module FOSMH1U holder for FCE1U: Splice module FOSMH2U holder for FCE2U: Splice module FOSMH4U holder for FCE4U: Tools and Accessories Panduit connector PCRT removal tool: Fiber slack spool 1 RU: FMS1 Fiber slack spool 2 RU: FMS2 Bend radius clip: FEBRC ^Substitute for fiber type: X = (OM3/OM4 – 10Gig ™ 50/125 µm); 5 = (OM2 – 50/125 µm); 6 = (OM1 – 62.5/125 µm); 9 = (OS1 – 9/125 µm) **Substitute for length in meters; 1, 2, 3, 5 and 10 are standard lengths. Contact Panduit Customer Service for other available lengths. Opticom ® QuickNet ™ Rack Mount Fiber Cassette Enclosures Fiber Capacities Enclosure and Fiber Count QuickNet Cassette Type ™ 12 duplex LC adapters to 2 MTP* 6 duplex LC adapters to 1 MTP* 6 duplex SC adapters to 1 MTP* 3 duplex SC adapters to 1 MTP* 6 simplex ST adapters to 1 MTP* FCE1U/FCE1UA (holds up to 4 FAPs or cassettes) 96 48 48 24 24 FCE2U (holds up to 8 FAPs or cassettes) 192 96 96 48 48 FCE4U (holds up to 12 FAPs or cassettes) 288 144 144 72 72 *MTP is a registered trademark of US Conec Ltd. Enclosure and Fiber Count Fiber Adapter Panel Type FCE1U/FCE1UA 96 64 48 48 32 24 24 48 12 duplex LC adapters 8 duplex LC adapters 6 duplex LC adapters 6 duplex SC adapters 4 duplex SC adapters 3 duplex SC adapters 6 simplex ST adapters 6 duplex MT-RJ adapters FCE2U 192 128 96 96 64 48 48 96 FCE4U 288 192 144 144 96 72 72 144 Opticom® QuickNet ™ Rack Mount Fiber Cassette Enclosures 17.6 (447) 17.6 (447) 16.8 (426) 16.8 (426) 1.72 (44) 1.72 (44) FCE1U FCE1UA 17.6 (447) 17.6 (447) 16.8 (426) 16.8 (426) 3.47 (88) FCE2U 6.80 (173) Dimensions are in inches (Dimensions in parentheses are metric). FCE4U WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Jalisco, Mexico cs-la@panduit.com Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800-777-3300 and reference RKSP40 ©2009 Panduit Corp. ALL RIGHTS RESERVED. WW-RKSP40 9/2009