GJS660U

A. System Overview PHYSICAL INFRASTRUCTURE SYSTEMS B. Copper Systems Equipment Jumper Kits • Bond network equipment to grounding strip or grounding busbar • Jumper kit available with both ends factory terminated to provide a bolt-on solution • Jumper kit available with one end factory terminated to attach to the grounding strip or grounding busbar; free end accommodates unique equipment terminations • Use jumpers with 90° bent lug, on grounding strip side, for high density grounding requirements up to one ground point per RU • Use jumpers with 45° bent lugs, on grounding strip side, for improved cable management • Engineered to comply with US and International grounding requirements Length In. (m) Std. Std. Pkg. Ctn. Qty. Qty. Part Number Angle Part Description #6 AWG (16mm²) Equipment Jumper Factory Terminated on One End for Switches, Cabinets, and 4-Post Racks GJS660U 60 (1.52) GJS696U 96 (2.44) RGEJ1024PFY Straight #6 AWG green wire with yellow horizontal stripe. Jumper is pre-terminated on one end with LCC6-14JAW-L. Straight 1 10 1 10 RGEJ1057PFY 24 (0.61) 45° RGEJ1024PFY 24 (0.61) 90° RGEJ1036PFY 36 (0.91) 90° RGEJ1024URT* 24 (0.61) #10 AWG (6mm²) jumper; bent lug on grounding strip side to straight lug on equipment; provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2", M6 x 12mm, #10-32 x 1/2" and M5 x 12mm thread-forming screws. Straight #10 AWG (6mm²) jumper, 24 in. (609.6mm) L, pre-terminated with two #10 (5.3mm) stud hole ring terminals to provide a bolt-on solution for grounding network equipment. 1 10 1 10 1 10 1 10 #6 AWG (16mm²) Equipment Jumpers Factory Terminated on Both Ends RGEJ624PHY 24 (0.61) 45° RGEJ624PFY 24 (0.61) 90° RGEJ636PFY 36 (0.91) 90° RGEJ660U* 60 (1.52) RGEJ696U* 96 (2.44) #6 AWG (16mm²) jumper; bent lug on grounding strip side to straight lug on equipment; provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2", M6 x 12mm, #10-32 x 1/2" and M5 x 12mm thread-forming screws. Straight #6 AWG (16mm²) jumper, 60 in. (1524mm) L, pre-terminated with two straight slotted lugs to provide a bolt-on solution for grounding network equipment. Straight #6 AWG (16mm²) jumper, 96 in. (2438.4mm) L, pre-terminated with two straight slotted lugs to provide a bolt-on solution for grounding network equipment. 1 10 1 10 1 10 1 10 1 10 57 (1.45) 90° #10 AWG (6mm²) jumper; bent lug on grounding strip side; provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2", M6 x 12mm, #10-32 x 1/2" and M5 x 12mm thread-forming screws. E. Zone Cabling F. Wireless H. Media Distribution I. Physical Infrastructure Management J. Overhead & Underfloor Routing K. Surface Raceway L. Cabinets, Racks & Cable Management M. Grounding & Bonding #10 AWG (6mm²) Equipment Jumper Factory Terminated on One End RGEJ1057PFY D. Power over Ethernet G. Outlets #10 AWG (6mm²) Equipment Jumpers Factory Terminated on Both Ends RGEJ1024PHY C. Fiber Optic Systems 1 10 N. Industrial #6 AWG (16mm²) Equipment Jumper Factory Terminated on One End RGEJ657PFY 57 (1.45) 90° #6 AWG (16mm²) jumper; bent lug on grounding strip side; provided with .16 oz. (5cc) of antioxidant and two each #12-24 x 1/2", M6 x 12mm, #10-32 x 1/2" and M5 x 12mm thread-forming screws. An equal number of M6 x 12mm thread-forming screws also provided in each kit. *For use with VBlock preconfigured solutions. 1 10 O. Labeling & Identification P. Cable Management Accessories Q. Index www.panduit.com For service and technical support, call 866-405-6654 (outside the U.S. and Canada, see catalog back cover). M.19