GM-3-Q

ELECTRICAL SOLUTIONS A. System Overview Grounding Clamp with Spacer for Flat Surfaces, Bronze B1. Cable Ties Type GM • Used to ground copper code conductor to flat surfaces • Cast from high strength, electrolytic bronze to provide reliable grounding connections • High strength silicon bronze hardware for long term reliable assembly • Accommodates a wide range of conductor sizes – minimizes inventory requirements • Incorporates spacer plate to separate conductor from mounting surface • UL Listed for grounding and bonding and suitable for direct burial in earth or concrete B2. Cable Accessories B3. Stainless Steel Ties L W C1. Wiring Duct H C2. Surface Raceway Part Number GM-2-Q GM-3-Q Figure Dimensions In. (mm) Conductor Size Range #4 SOL – 2/0 STR L 1.63 (41.4) 2.13 (54.1) 2/0 SOL – 250 kcmil W 1.13 (28.7) 1.50 (38.1) H 1.75 (44.5) 2.00 (50.8) Hex Size (In.) Bolt 9/16 Nut 9/16 Std. Pkg. Qty. 25 3/4 3/4 25 C4. Cable Management D1. Terminals Grounding Clamp for Flat Surfaces, Bronze Type GMS • Used to ground copper code conductor to flat surfaces • Cast from high strength, electrolytic bronze to provide reliable grounding connections • High strength silicon bronze hardware for long term reliable assembly C3. Abrasion Protection • Accommodates a wide range of conductor sizes – minimizes inventory requirements • UL Listed for grounding and bonding and suitable for direct burial in earth or concrete D2. Power Connectors D3. Grounding Connectors L W E1. Labeling Systems H E2. Labels Part Number GMS-1-X Conductor Size Range #8 SOL – #4 STR GMS-2-Q #4 SOL – 2/0 STR GMS-3-Q 2/0 SOL – 250 kcmil Figure Dimensions In. (mm) L 1.25 (31.8) 1.63 (41.4) 2.13 (54.1) W 1.00 (25.4) 1.13 (28.7) 1.50 (38.1) H 1.63 (41.4) 1.75 (44.5) 2.00 (50.8) Hex Size (In.) Bolt 9/16 Nut 9/16 Std. Pkg. Qty. 10 9/16 9/16 25 3/4 3/4 25 E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)