GPCV-COY

18900 Panduit Drive Tinley Park, IL 60487 Customer Service: 800-777-3300 TDS: Effective Date: Revision: GPCV 16JUL12 2 Technical Data Sheet Snap-On Markers This specification is intended to outline the physical and chemical properties of PANDUIT’s snap-on marker material and include the following part number identifiers: GPCV-M*Y GPCV-R*Y Part Number Prefixes PCV-*Y PRODUCT SPECIFICATIONS: Description: Material is RoHS compliant (European Union directive 2002/95/EC). This material is a rigid vinyl with a smooth finish on both sides. Print Methods: This material is preprinted. Standard Colors: Orange, Yellow Thickness: 11.0 +/- 1.0 mils Service Temperature Range: -20°F to 176°F (-29°C to 80°C) Minimum Application Temperature: 40°F (4.4°C) Storage Conditions: Store at 70°F (21°C) and 50% Relative Humidity. PROPERTIES: PERFORMANCE: Tensile Strength: Elongation: UV Resistance: MD: 5000 – 10,000 psi (PSTC-131) MD: 50% (PSTC-131) Specific Gravity: 1.20 minimum Impact Resistance: 15.0 ft-lb/in (Izod Notch test at 72°F (22°C)) Flexural Strength: 10,000 – 13,000 psi Modulus of Elasticity: 370,000 – 500,000 psi (flexural) *3000 hours no change observed (ASTM G154) *3000 hours equates to 5 years of assimilated outdoor UV exposure. Page 1 of 2 © 2007 PANDUIT Corp TDS: GPCV 18900 Panduit Drive Tinley Park, IL 60487 Customer Service: 800-777-3300 TDS: Effective Date: Revision: GPCV 16JUL12 2 Technical Data Sheet CHEMICAL RESISTANCE TEST: CHEMICAL 7 DAY IMMERSION Distilled Water Mineral Spirits Gasoline Toluene Isopropyl Alcohol Acetone Methyl Ethyl Ketone 1,1,1 Trichloroethane SAE 30 Motor Oil ASTM #3 Oil 30% Sulfuric Acid 10% Sulfuric Acid 30% Hydrochloric Acid 10% Hydrochloric Acid 5% Acetic Acid 50% Sodium Hydroxide 10% Sodium Chloride Alconox Diesel Fuel DIP TEST NC NC NC NC NC MD MD NC NC NC NC NC NC NC NC LD NC NC NC NC NC NC NC NC MD MD NC NC NC NC NC NC NC NC NC NC NC NC NC = No Change LD = Loss in print density MD = Material disintegrates 7 Day Immersion : Immersed in chemical for 7 days Dip Test: Five 10 minute immersions in chemical with 30 minute recovery time References: PSTC: ASTM: Pressure Sensitive Tape Council (U.S.A.) American Society for Testing and Materials (U.S.A.) LIMITED WARRANTY All PANDUIT Identification Solution Products (except for Software programs) are warranted to be free from defects in material and workmanship at the time of sale but our obligation under this warranty is limited to replacement of the product proved to be defective within 6 months from the date of sale, or in the case of printers, within 90 days from the date of sale. This warranty is void if the products or printers are modified, altered or misused in any way. Use of PANDUIT printers with any product other than the specified PANDUIT products for which the printer was designed constitutes misuse. Before using, the user shall determine the suitability of the product for its intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed by officers or seller and manufacturer. NEITHER PANDUIT OR SELLER SHALL BE LIABLE FOR ANY OTHER INJURY, LOSS OR DAMAGE, WHETHER DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE THE PRODUCT OR THE PRINTER. THIS WARRANTY IS MADE IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PARTICULAR USE ARE SPECIFICALLY EXCLUDED. The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide or use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. This publication is not to be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc. Page 2 of 2 © 2007 PANDUIT Corp TDS: GPCV