GTCDB2/0-L

NOTES: THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. 1. MATERIAL: -BODY - HIGH COPPER CONTENT ALLOY, TIN PLATED -HARDWARE - REFERENCE CHART T45 TORX DRIVE 2. PARTS ARE cULus LISTED TO UL467/CSA 22.2 NO 41. US 3. CONNECTORS ACCOMMODATE EITHER ONE OR TWO COPPER CONDUCTORS IN THE RANGE SPECIFIED. 4. TO PREVENT BOLT ROTATION, DRIVE RIBBED SECTION OF BOLT INTO 0.44 [11.2] DIA HOLE. T C DB XXXXX A 5. DIMENSIONS IN PARENTHESIS ARE MILLIMETERS 6. PACKAGE QUANTITIES" L = 50 DIRECT BURIAL RATED PANDUIT PART NUMBER B SEE TABLE FOR PANDUIT PART NUMBER (EXAMPLE: GTCDB2/0) COPPER CONDUCTOR RANGE GTC1/0-L 6 SOL - 1/0 STR GTCDB1/0-L GTC2/0-L 2 SOL - 2/0 STR GTCDB2/0-L GTC250-L 2/0 STR - 250 kcmil 4/0 SOL GTCDB250-L DIRECT BURIAL RATED NO YES NO YES NO YES HARDWARE BOLT ZINC PLATED STEEL ZINC/NICKEL PLATED STAINLESS STEEL ZINC PLATED STEEL ZINC/NICKEL PLATED STAINLESS STEEL ZINC PLATED STEEL ZINC/NICKEL PLATED STAINLESS STEEL NUT/WASHERS ZINC PLATED STEEL STAINLESS STEEL ZINC PLATED STEEL STAINLESS STEEL ZINC PLATED STEEL STAINLESS STEEL DIMENSIONS IN [mm] ACCOMODATES TRAY WALL THICKNESS A B STEEL/ALUMINUM .062 [1.57] TO 0.125 [3.18] LISTED C 1.49 [37.8] 1.15 [29.2] STEEL/ALUMINUM .062 [1.57] TO 0.125 [3.18] STEEL 0.96 [2.44] TO 0.125 [3.18] ALUMINUM 0.062 [1.57] TO 0.125 [3.18] 1.75 [44.5] 2.0 [50.8] 2.04 [51.8] TRAY WALL THICKNESS C 3/8-16 HARDWARE 0.56 [14.3] ACROSS FLATS TITLE CABLE TRAY CLAMPS CUSTOMER DRAWING ITEM REVISION NAME DATASET FILE NAME 02 5/18 JHNU BKR RGB ADDED TORX DRIVE NOTE 01 3/18 JHNU BKR RGB REVISED HARDWARE 00 5/17 JHNU BKR RGB REV DATE BY CHK APR 13J051AJ-DC 13J051AJ/02 13J051AJ-DC/02.SLDDRW UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN [mm] .X .XXX .XX ANGLES THIRD ANGLE PROJECTION DRAWING RELEASED DESCRIPTION ECN DRAWN BY JHNU DATE 5/17 CHK BKR SCALE N/A MATERIAL SEE NOTES DRAWING NUMBER 13J051AJ-DC SHEET 1 0F 1 SIZE B