H100X084H1C

TDS: Effective Date: Revision: 18900 Panduit Drive Tinley Park, IL 60487 Customer Service: 800-777-3300 GMUHS31 28NOV12 8 Technical Data Sheet Heat Shrink Labels This specification is intended to outline the physical and chemical properties of PANDUIT’s GMUHS31 tubing material for wire identification and insulation purposes and include the following part numbers and printable material identifiers: Part Number Prefixes Printable Material Suffixes H*C H1T-B H*T H*T-2 PRODUCT SPECIFICATIONS: Description: Standard Colors: Material is RoHS compliant (European Union directive 2002/95/EC). GMUHS31 is a crosslinked, flexible, heat shrinkable thermal transfer and dot matrix printable polyolefin. This product meets the material requirements and physical properties of AMS-DTL-23053/5C (Class 1 and Class 3) and UL standard 224 with a VW-1 rating. When printed using RMH4BL, RMEH4BL, RHH4BL-S, RMR4BL, RMER4BL, RMR4WH, RHR4BL-S, or RMR2BL thermal transfer ribbons it will also meet SAE-AS5942, MILSTD-883F Method 2015.13, Solutions A, B and D, and MIL-STD-202G Method 215K, Solutions A,C and D. This product has been tested for use as an identification marker for use in (Class 1E) harsh environments in various nuclear power plants. RMH4BL, RMEH4BL, RHH4BL-S, RMR4BL, RMER4BL, RMR4WH, RHR4BL-S, or RMR2BL White, Yellow, Red, Black (per MIL-STD-104C) Shrink Ratio: 3 to 1 Service Temperature Range: Minus 67F to 275F (Minus 55C to 135C) Store at 70F (21C) and 50% Relative Humidity For cassette products do not exceed 95°F. Recommended Ribbons: Storage Conditions: PROPERTIES: PERFORMANCE: Tensile Strength: Elongation Ultimate: 1500 psi (10.3 MPa) minimum(ASTM D638) Dielectric Strength: Total Longitudinal Change: Water Absorption: Low Temperature Flexibility: Printability: Flammability: Page 1 of 4 200% minimum (ASTM D 638) 500 volts/mil minimum(ASTM D2671, Sections 20-25) Minus 15% to +5% (ASTM D2671, Sections 8-13) 0.5% maximum (ASTM D2671, Sections 79-80) No cracking (ASTM D2671, Section 36-43) Product meets print performance of 100 rubs(Taber abraser, CS-10 wheels, 100 cycles/250 gm wt) Product passes UL 224 standard, VW-1 for flammability  2008 PANDUIT Corp TDS-GMUHS31 18900 Panduit Drive Tinley Park, IL 60487 Customer Service: 800-777-3300 TDS: Effective Date: Revision: GMUHS31 28NOV12 8 Technical Data Sheet Specific gravity: Shrink Temperature: Corrosion: UV Resistance: 1.35 max (ASTM D882, Sections 73-74) 194F to 248F(90C to 120C) Non-corrosive (ASTM D2671, Sections 93-95, Procedure A) The samples were tested in a QUV weather tester as per test procedure ASTM G-154. Observations made at *3000 hours exposure showed no loss in legend or change in material. *3000 hours equates to 5 years of assimilated outdoor UV exposure. Fluid Resistance: Tubings tested in the following fluids per ASTM D2671 Sections 63-67 Hydraulic Fluid MIL-H-5606 JP8 - MIL-T-5624 OIL - MIL-L-7808 OIL - MIL-L-23699 5% NaCl - A-A-694 Deicing Fluids – MIL-A-8243 After immersion test: Tensile Strength - 6.89 MPa (1000 psi) minimum per ASTM D2671 Sections 44-48 Ultimate Elongation - 100% minimum per ASTM D2671 Sections 44-4 PROPERTIES FOR SOLAR APPLICATION: PERFORMANCE: Short term temperature exposure: 30 days at -51C, no visible change observed Short Term high temperature exposure: 30 days at 93C, no visible change observed Relative Lightfastness and weatherability: 1000 hours, slight fade in color observed (ASTM D3424, Method 4) Tensile Strength: MD: 1158 PSI (ASTM D3759) Elongation: MD: 510% (ASTM D3759) Marking Performance: SAE-AS5942: Samples were tested heat shrunk. Print still legible after 20 eraser rubs with hard hand pressure. MIL-STD-202G: Method 215K, Solution A, C, and D: 3 cycles of 3 minute immersions in specified fluids followed by toothbrush rub after each immersion. Print still legible in all test fluids. MIL-STD-883F: Method 2015.13, Solution A, B and D: 3 cycles of 1 minute immersion in specified fluids followed by toothbrush rub after each immersion. Print still legible in all test fluids. Nuclear Plant (Class 1E) Harsh Environment Test Result Summary GMUHS31 heat shrink tubing has been tested for use as an identification marker for use in harsh environments in various nuclear power plants. Printed markers were subjected to radiation exposure, thermal aging and LOCA/MSLB environmental testing as shown in the three tables below. Test margins related to IEEE 323-2003 were used. Page 2 of 4  2008 PANDUIT Corp TDS-GMUHS31 18900 Panduit Drive Tinley Park, IL 60487 Customer Service: 800-777-3300 TDS: Effective Date: Revision: GMUHS31 28NOV12 8 Technical Data Sheet General Environmental Test Result Summary Table Item Normal Service Life: 40 years Temperature 140F (60C) Pressure Atmospheric Relative Humidity 90% Radiation 2.0E7 rads *Halogen Content Marker with (Print) (Thermal Print) Fluorine < 0.1 ppm (Thermal Print) Bromine < 0.1 ppm (Thermal Print) Chlorine < 0.1 ppm (Thermal Print) Iodine < 0.1 ppm (Dot Matrix Print) Fluorine < 0.1 ppm (Dot Matrix Print) Bromine < 0.1 ppm (Dot Matrix Print) Chlorine < 0.7 ppm (Dot Matrix Print) Iodine < 0.1 ppm Print remained legible with Print Permanence no change in print density Physical Integrity No significant change Accident 1 year 360F (182.2C) (peak) 57 psig (peak) 100% (max) 2.0E8 rads (TID) Not Applicable Thermal Print -No significant change Dot Matrix – Some density loss Some warping and splitting but remained attached on wire. *The chemical analysis method DM4110B (De-ionized Water Soluble Method) was performed to identify concentration of halogen *ions in this material that could potentially leach onto materials such as stainless steel and promote corrosion. This chemical analysis does not identify the concentrations of toxic gaseous effluents released by burning this material. Containment Spray Test Information Table Item Short Term (Injection Phase) Duration 4 hours Temperature 60-360F (16-182C) Spray Density (gpm/ft^2.) >0.62 (25.3 L/min/m2) Chemical Composition Hydrazine (N 2 H 4) 0-50 ppm Boric Acid (H 3 BO 3 ) 4,400 ppm pH 4.0 - 10.0 Long Term (Recirculation Phase) 30 days 60-360F (16-182C) >0.62 (25.3 L/min/m2) 0-50 ppm 4,400 ppm 7.0 - 8.5 LOCA /MSLB Combined Temperature/Pressure Test Information Table TIME Temperature Pressure Seconds Deg F ( Deg C) PSIG (kPa) 0 120 (49) 0 (0) 10 300 (149) 57 (393) 50 360 (182) 57 (393) 250 360 (182) 57 (393) 270 275.3 (135.2) 57 (393) 1 X 103 275.3 (135.2) 57 (393) 1 X 104 230 (110) 46 (317) 1 X 105 190 (88) 20 (138) 1 X 106 150 (66) 10 (69) 2.592 X 106 (30 days) 150 (66) 10 (69) 1.572 X 107 (182 days) 142 (61) 10 (69) Page 3 of 4  2008 PANDUIT Corp TDS-GMUHS31 18900 Panduit Drive Tinley Park, IL 60487 Customer Service: 800-777-3300 TDS: Effective Date: Revision: GMUHS31 28NOV12 8 Technical Data Sheet 3.15 X 107 (365 days) 142 (61) 10 (69) CHEMICAL/SOLVENT RESISTANCE: Samples were thermal transfer printed with RMR*BL/RMER*BL/RHR*BL-S/RMR*WH/RMER*WH and RMH*BL/RMEH*BL/RHH*BL-S ribbons. Test was conducted at room temperature. The samples were immersed in the specified chemical reagents for 5 immersions using the following cycle: a 10 minute immersion time followed by a 30 minute recovery time. Chemical Reagent Distilled water Mineral Spirits ASTM #3 Oil Isopropyl Alcohol Methanol 3% Alconox Detergent 10% Sodium Hydroxide Solution 10% Sulfuric Acid Solution 5% Sodium Chloride Solution Freon TF Super Agitene Jet A Fuel Arco Truslide 68 SAE 30 Motor Oil APPROVALS: UL Recognized: UL224 CSA Certified: C22.2 No. 198.1-06 Visual Observation No effect No effect No effect No effect No effect No effect No effect No effect No effect No effect No effect No effect No effect No effect File Number: E205133 File Number: 256205 LIMITED WARRANTY All PANDUIT Identification Solution Products (except for Software programs) are warranted to be free from defects in material and workmanship at the time of sale but our obligation under this warranty is limited to replacement of the product proved to be defective within 6 months from the date of sale, or in the case of printers, within 90 days from the date of sale. This warranty is void if the products or printers are modified, altered or misused in any way. Use of PANDUIT printers with any product other than the specified PANDUIT products for which the printer was designed constitutes misuse. Before using, the user shall determine the suitability of the product for its intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed by officers or seller and manufacturer. NEITHER PANDUIT OR SELLER SHALL BE LIABLE FOR ANY OTHER INJURY, LOSS OR DAMAGE, WHETHER DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE THE PRODUCT OR THE PRINTER. THIS WARRANTY IS MADE IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PARTICULAR USE ARE SPECIFICALLY EXCLUDED. The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide or use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. This publication is not to be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc. Page 4 of 4  2008 PANDUIT Corp TDS-GMUHS31