Cable Ties & Wiring Accessories
Contents
(See Page 144 for alphabetical index of part numbers referencing specific page numbers.)
Cable Ties and Installation Tooling
Available Styles
PAN-TY® Cable Ties, Clamp Ties, Marker Ties, Push Mount Ties, Lashing Ties . . . . . . . . . . . . . . . 4-21
DOME-TOP™ BARB-TY™ Cable Ties, Clamp Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-26
SUPERFLEX™ Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
IN-LINE Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-28
Specialty Ties (Hook & Loop, Stud & Chassis/Panel Mount, Double Loop,
Umbrella Push Mount, PAN-POUCH, Marker Strap, Aerial Support) . . . . . . . . . . . . . . . . . . . . . . . 29
Cable Ties Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Cable Ties Installation Systems (manual/automatic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43-55
Available Materials
Nylon 6.6 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
Heat Stabilized Nylon 6.6 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12
Weather Resistant Nylon Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-17
Polypropylene Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Flame Retardant Nylon 6.6 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Weather Resistant Nylon 12 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
HALAR▲ and TEFZEL■ Cable Ties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
TAK-TY™ Hook & Loop Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Additional Information
Convenient Small Packages of Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Lashing Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 &
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
Custom Hot Stamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Color and Material Availability of Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-39
Bulk Package Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-41
Selecting the Proper Cable Tie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56-68
Cable Tie Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-71
Stainless Steel Products
PAN-STEEL™ Stainless Steel Tie . . . . . . . . . . . .
Stainless Steel Installation Tools . . . . . . . . . . . .
Metal Marker Plates/Tags/Marking Devices . . . .
Stainless Steel Strapping . . . . . . . . . . . . . . . . . .
.....
.....
.....
.....
....
....
....
....
.....
.....
.....
.....
.....
.....
.....
.....
....
....
....
....
.....
.....
.....
.....
....
....
....
....
.....
.....
.....
.....
. . . . . 73
. . . . . 74
. . . 74-75
. . . . . 76
Wiring Accessories
Cable Tie Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Wiring Accessories (used without cable ties) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101-114
Selection and Use of Adhesive Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115-120
Harness Board Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121-126
Abrasion Protection Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129-143
▲HALAR is the Registered Trademark for Ausimont, Inc. fluoropolymer.
*VELCRO ® is a registered trademark of the Velcro Companies.
„TEFZEL is the Registered Trademark of E.I. DuPont Co., fluoropolymer.
All reference dimensions in this catalog are shown in inches (and millimeters).
1
World Leader in Cable Ties and
Wiring Accessories
Panduit is the world’s largest producer of cable ties and
wiring accessories, offering the most complete selection
of sizes, styles and materials. We continually provide new
cable tie and wiring accessory designs to meet the
changing application challenges encountered by our
customers while providing lowest installed costs.
Panduit also offers the largest selection of ergonomic
cable tie installation tools—from high speed automatic
systems to hand operated tools. So, whatever the need,
Panduit has the tool to help lower your total installed cost.
Assured Quality
To help assure optimum quality, Panduit products are designed and manufactured to meet applicable
international, UL, military and customer standards:
The International Standards Organization (ISO) establishes worldwide standards for products and services in
recognition of increasing globalization of markets. The ISO program sets up the requirements for quality assurance
systems of these worldwide standards. Panduit is registered to ISO 9001, the most comprehensive model in the
standard, meant for companies who design, manufacture, install and service the products they sell. Registration has
been awarded by Underwriters’ Laboratories (Certificate No. A2269) after extensive audit of QA systems employed at
Panduit.
ISO 9000
Underwriters’ Laboratories, Inc. (File E56854)
Most Panduit miniature, intermediate, standard, light heavy and heavy cross-section ties are Recognized or Listed by
Underwriters’ Laboratories in their Directory under the category “Wire Positioning Devices” (ZODZ(2)). Natural,
pigmented and weather resistant cable ties are recognized for indoor use at temperatures up to 85 °C (185°F). Heat
stabilized ties are U.L. recognized for indoor use at temperatures up to 105°C (221°F).
Military Specification: MIL-S-23190E
Military Specification MIL-S-23190E covers the actual test requirements on cable ties. Panduit cable ties, when
tested, either meet or exceed the requirements of this specification.
Nuclear Regulatory Commission
The NRC developed rules and regulations concerning Quality Assurance Criteria for Nuclear Power Plants or Title 10,
Chapter 10, Part 50, Appendix B (10CFR50). Panduit Corp’s Quality Assurance program is designed to satisfy the 18
criteria set forth in NRC 10CFR50, Appendix B, Military Specification MIL-Q-9858A.
Ford Motor Company
Panduit has received Q1 certification status from Ford Motor Company. Q1 certification enables all Panduit cable tie
manufacturing facilities to approve all initial samples and production shipments of the parts destined for Ford
operations throughout the world.
InternationalApprovals Independent Testing Facilities
German (VG) Military
2
Lloyd’s Register of
Shipping
RINA
Germanischer Lloyd
Nippon Kaiji
Kyokai
Det Norske Veritas
Bureau Veritas
Styles of Cable Ties
Selection of Styles
PAN-TY ® Cable Ties
This line offers the largest selection of styles, materials, and sizes. The ties are
available in 6.6 nylon, nylon 12, polypropylene, HALAR▲ and TEFZEL ■
material. Available in sizes from .60" (15mm) maximum bundle diameter up to
13" (330mm) maximum bundle diameter. All are self-locking and many sizes
are available in both releasable and non-releasable types. PAN-TY Cable Ties
are quickly installed by hand or with PANDUIT installation tools.
DOME-TOP ® BARB-TY ® Cable Ties
These cable ties provide consistent performance and reliability for those users
who prefer a cable tie with a stainless steel locking barb. They are infinitely
adjustable through their entire bundle range. On selected popular sizes, the
additional length of BARB-TY Cable Ties provides an average of 30% more
bundle area than other metal barb cable ties. Available in sizes from .90"
(23mm) maximum bundle diameter up to 9.0" (229mm) maximum bundle
diameter and may be installed by hand or with PANDUIT installation tools.
Specialty Ties
Panduit continually develops new products to help solve the unique application
problems of our customers. One of these products is the aerial support tie
which typifies the design/manufacturing capability of Panduit to respond to
these special needs.
Stainless Steel Ties and Strapping
Underground, underwater, indoors, outdoors—however hostile
the environment—PANDUIT Stainless Steel Ties and Strapping let you
fasten and identify components and cables quickly and easily. Stainless
steel ties stand up to most chemicals, to nuclear and ultraviolet radiation,
to seawater and direct burial in any soil, and to temperature extremes
from -112°F to 1700°F (-80°C to 925°C).
For Technical Information in the U.S.A.
Call 888-506-5400 or 708-532-1800 -- Extension 1483
Other countries, see the Home Page for local Sales Office information
▲HALAR is the Registered Trademark for Ausimont, Inc. fluoropolymer.
„ TEFZEL is the Registered Trademark of E.I. DuPont Co., fluoropolymer.
3
PAN-TY ® Cable Ties
PAN-TY Cable Tie Features/Benefits:
®
1. ONE PIECE CONSTRUCTION
2. SMOOTH, ROUND EDGES
3. TENSILE STRENGTH
• Consistent performance and
reliability.
• Available in lengths from 2.8"
(71mm) up to 43.3" (1100mm) to
meet a variety of application
requirements.
• No irritation to installer’s hands,
increases productivity.
• Prevents damage to wire
insulation.
• Exceeds Industry and Military
(MIL-S-23190E) standards
• Available in seven loop tensile
strengths from 8 lbs. (36N) up to 250
lbs. (1112N) to provide an
economical selection from which to
choose.
4. CURVED TIP
5. FINGER TIP GRIP
6. MORE TEETH PER INCH
• Orients tip toward head to
speed installation—lowers
installed cost.
• Faster initial threading.
• Easier to pick up from flat
surfaces.
• Finger tip grip on selected sizes
assures positive grip during
threading of the tie.
• Grip prevents tip from slipping out
of cable tie head during
threading.
• Greater number of small uniform
teeth provides tighter bundles.
• Because they’re flush with surface
they provide proper wire bundle
grip without wire insulation
damage.
7. LOW THREADING FORCE
8. ONE PIECE LOCKING DESIGN
9. MATERIAL AVAILABILITY
• Lowest threading force of any
one-piece cable tie in the
industry.
• Reduces operator fatigue.
• Thin tapered tip facilitates
threading, easier initial inser tion.
• Multiple locking tooth design
provides greater strength and
reliability.
• Available in self locking or
releasable styles for use in
applications where changes are
anticipated.
• Available in a variety of materials
to meet the needs of special
environments.
• Properly selected ties can be
used indoors or outdoors with
assurance of long lasting
performance.
4
Nylon 6.6 Locking Cable Ties (PLT Series)
PAN-TY ®
Nylon 6.6
Locking Cable Ties
These versatile fasteners can be used in countless applications
wherever you need to bundle wire, cable, or hose. They tie bundle
diameters up to 13 inches (can also be joined together for even larger
diameters) and have minimum loop tensile strengths from 12 to 175
pounds. Colors are available for specific color-coding applications (See
Page 37 to 39 for color and material availability chart).
All PLT cable ties (except -DTP, -XMR, -VMR, -5K, heavy and extra
heavy cross section) have curved tip design for faster threading.
SUB-MINIATURE
AND MINIATURE
CROSS SECTION
Part Number†
Cable Ties for
Automatic Tools—
See Page 46
Length
Width
A
B
In. (mm) In. (mm)
Packaging*
Thickness
C
In. (mm)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GS2B
100
1000
1000
50000
PLT.6SM-C
2.8
(71)
.070
(1.8)
.030
(.76)
.095
(2.4)
.125
(3.2)
.6
(15.2)
8
(36)
PLT.7M-C
3.1
(79)
.090
(2.3)
.032
(.9)
.115
(2.9)
.180
(4.6)
.68
(17.3)
18
(80)
100
1000
1000
50000
PLT1M-C
3.9
(99)
.098
(2.5)
.043
(1.1)
.154
(3.9)
.180
(4.6)
.87
(22)
18
(80)
100
1000
1000
50000
PLT1.5M-C
5.6
(142)
.098
(2.5)
.043
(1.1)
.154
(3.9)
.180
(4.6)
1.25
(32)
18
(80)
100
1000
1000
50000
8.0
(203)
.098
(2.5)
.043
(1.1)
.154
(3.9)
.180
(4.6)
2.00
(51)
18
(80)
100
1000
1000
25000
PLT2M-C
GS2B,PPTS
or STS2
INTERMEDIATE
CROSS SECTION
PLT1.5I-C
5.6
(142)
.142
(3.6)
.045
(1.2)
.240
(6.1)
1.38
(35)
100
1000
1000
25000
PLT2I-C
8.0
(203)
.142
(3.6)
.045
(1.2)
.240
(6.1)
2.00
(51)
100
1000
1000
25000
PLT2.5I-C
9.7
(246)
.142
(3.6)
.052
(1.3)
.240
(6.1)
2.50
(64)
100
1000
1000
10000
PLT3I-C
11.4
(290)
.145
(3.7).
.052
(1.3)
.260
(6.6)
3.00
(76)
100
1000
1000
10000
PLT4I-C
14.6
(371)
.145
(3.7)
.052
(1.3)
.260
(6.6)
4.00
(102)
100
1000
1000
10000
.180
(4.6)
40
(178)
GS2B, PPTS
or STS2
STANDARD
CROSS SECTION
PLT1S-C
4.8
(122)
.316
(8.0)
1.00
(25)
100
1000
1000
25000
PLT1.5S-C
6.2
(157)
.316
(8.0)
1.50
(38)
100
1000
1000
25000
PLT2S-C
7.4
(188)
.316
(8.0)
1.88
(48)
100
1000
1000
10000
PLT2.5S-C
9.8
(249)
.337
(8.6)
2.50
(64)
100
1000
1000
10000
PLT3S-C
11.5
(292)
.337
(8.6)
3.00
(76)
100
1000
1000
10000
PLT3.5S-C
13.0
(330)
.337
(8.6)
3.50
(89)
100
1000
1000
10000
PLT4S-C
14.5
(368)
.337
(8.6)
4.00
(102)
100
1000
1000
5000
PLT4.5S-C
15.5
(394)
.337
(8.6)
4.50
(114)
100
1000
1000
5000
PLT5S-C
17.5
(445)
.337
(8.6)
5.00
(127)
100
500
1000
5000
.190
(4.8)
.052
(1.3)
.220
(5.6)
50
(222)
GS2B, GS4H,
PPTS, STS2
or STH2
Most commonly used parts appear in BOLD.
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to Page 41.
For colors and other materials,
See Page 36 to 39.
5
Nylon 6.6 Locking Cable Ties (PLT Series)
LIGHT HEAVY
AND HEAVY
CROSS SECTION
Part Number†
Length
Width
A
B
In. (mm) In. (mm)
Thickness
C
In. (mm)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
120 Lb. Minimum Loop Tensile
PLT2H-L
8.1
(206)
.290
(7.4)
2.00
(51)
50
500
250
2500
PLT2.5H-L
10.0
(254)
.290
(7.4)
2.50
(64)
50
500
250
2500
PLT3H-L
11.4
(290)
.290
(7.4)
3.00
(76)
50
500
250
2500
PLT4H-L
14.5
(368)
.290
(7.4)
4.00
(102)
50
500
250
2500
50
500
100
2000
PLT6LH-L
21.9
(556)
PLT7LH-L
24.7
(627)
.325
(8.3)
7.00
(178)
50
500
100
2000
PLT8LH-L
27.6
(701)
.325
(8.3)
8.00
(203)
50
500
100
2000
PLT9LH-L
30.5
(775)
.325
(8.3)
9.00
(229)
50
500
100
1000
PLT10LH-L
34.3
(871)
.325
(8.3)
10.31
(262)
50
1000
100
1000
5.00
(127)
50
500
100
2500
50
500
100
2000
50
500
100
1000
25
500
100
500
.300
(7.6)
.075
(1.9)
.325
(8.3)
.480
(12.2)
6.00
(152)
GS4H, GS4EH
PPTEH or
STH2
120
(534)
175 Lb. Minimum Loop Tensile
PLT5H-L
17.7
(450)
PLT6H-L
20.9
(530)
PLT8H-L
30.6
(779)
PLT13H-Q
43.3
(1100)
.350
(8.9)
.078
(2.0)
.340
(8.6)
.560
(14.2)
6.00
(152)
9.00
(229)
175
(778)
GS4H, GS4EH
PPTEH or
STH2
13.00
(330)
Most commonly used parts appear in BOLD.
Lashing Ties typically are used on heavy duty jobs such as securing
conduit or large cable bundles to permanent structures, indoors or out.
Can be used with MCEH mounting clip ( See Page 15).
PAN-TY ® Locking
Lashing Ties
Part Number†
Length
Width
A
B
In. (mm) In. (mm)
Thickness
C
In. (mm)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
Nylon 6.6 for Indoor Use
PLT2EH-C
9.0
(229)
.075
(1.9)
2.0
(51)
—
—
100
1000
PLT5EH-Q
20.1
(510)
.075
(1.9)
5.0
(127)
25
250
100
1000
PLT6EH-Q
22.2
(563)
25
250
100
1000
—
—
100
1000
.500
(12.7)
.075
(1.9)
.085
(2.2)
.40
(10.2)
.80
(20.3)
6.0
(152.4)
8.0
(203.2)
250
(1112)
GS4H, GS4EH
PPTEH or
STH2
PLT8EH-C
28.3
(718)
PLT10EH-C
34.2
(868)
.085
(2.2)
10.0
(254)
—
—
100
500
PLT12EH-C
40.1
(1018)
.085
(2.2)
12.0
(304.8)
—
—
100
500
Most commonly used parts appear in BOLD.
6
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to Page 41.
For colors and other materials,
See Page 36 to 39.
Nylon 6.6 Locking Cable Ties(PRT Series)
PAN-TY ®
Releasable
Lashing Ties
Part Number†
Length
Width
A
B
In. (mm) In. (mm)
Thickness
C
In. (mm)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
Nylon 6.6 for Indoor Use
PRT2EH-C
9.0
(229)
.075
(1.9)
2.0
(51)
—
—
100
1000
PRT5EH-Q
20.1
(510)
.075
(1.9)
5.0
(127)
25
250
100
1000
PRT6EH-Q
22.2
(563)
25
250
100
1000
—
—
100
1000
PRT8EH-C
28.3
(718)
PRT10EH-C
34.2
(868)
.075
(1.9)
.500
(12.7)
.085
(2.2)
.40
(10.2)
.80
(20.3)
6.0
(152)
8.0
(203)
250
(1112)
Hand Installed
Only
.085
(2.2)
10.0
(254)
—
—
100
500
40.1
.085
(1018)
(2.2)
Most commonly used parts appear in BOLD.
12.0
(305)
—
—
100
500
PRT12EH-C
The extended tab end of releasable cable ties permits easy release and
reuse even after tie has been pulled up snug by hand. Releasable ties are
particularly useful in harnessing where changes are anticipated during
development, production or servicing in the field.
PAN-TY ®
Releasable Nylon
6.6 Cable Ties
To release, grasp the
head of the cable tie,
deflect release tab and
pull the cable tie away
from the bundle.
Part Number†
Length
Width
A
B
In. (mm) In. (mm)
Thickness
C
In. (mm)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
Standard Cross Section
PRT1S-C
4.8
(122)
.316
(8.0)
1.00
(25)
100
1000
100
10000
PRT1.5S-C
6.3
(160)
.316
(8.0)
1.50
(38)
100
1000
100
10000
PRT2S-C
7.4
(188)
.316
(8.0)
1.88
(48)
100
1000
100
10000
PRT3S-C
11.5
(292)
.337
(8.6)
3.00
(76)
100
1000
100
10000
PRT4S-C
14.5
(368)
.337
(8.6)
4.00
(102)
100
1000
100
5000
50
500
250
2500
50
500
250
2500
50
500
250
2500
.190
(4.8)
.052
(1.3)
.219
(5.6)
50
(222)
Hand Installed
Only
Heavy Cross Section
PRT2H-L
8.4
(213)
PRT3H-L
11.4
(290)
2.00
(51)
.300
(7.6)
.075
(1.9)
14.5
(368)
Most commonly used parts appear in BOLD.
PRT4H-L
.300
(7.6)
.480
(12.2)
3.00
(76)
4.00
(102)
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to 41.
80
(356)
For colors and other materials,
See Page 36 to 39.
7
Nylon 6.6 LockingClamp Ties (PLC Series)
Clamps are used to attach a bundle to another surface such as a control
panel, wall or ceiling using another fastener. The design allows for bundling
before or after screwing clamp in place.
PAN-TY ®
Nylon 6.6
Clamp Ties
Part Number†
Boss
Height
D
In. (mm)
Head
Width
E
In. (mm)
Hole
Dia.
F
In. (mm)
Screw
Size
Max.
Bundle
Dia.
In. (mm)
.045
(1.2)
.153
(3.9)
.239
(6.1)
.118
(3.0)
#4
(M2.5)
.75
(20)
18
(80)
GS2B, PPTS
or STS2
.045
(1.2)
.166
(4.2)
.335
(8.5)
.172
(4.4)
#8
(M4)
1.25
(32)
40
(178)
GS2B, PPTS
or STS2
.047
(1.2)
.160
(4.1)
.145
(3.7)
#6
(M3)
1.84
(47)
.047
(1.2)
.160
(4.1)
.206
(5.2)
#10
(M5)
1.84
(47)
.052
(1.3)
.220
(5.6)
.206
(5.2)
#10
(M5)
3.00
(76)
.052
(1.3)
.220
(5.6)
.206
(5.2)
#10
(M5)
Length Width Thickness
A
B
C
In. (mm) In. (mm) In. (mm)
Min. Loop Recommended
Std.
PANDUIT ®
Tensile
Pkg.
Installation
Strength
Qty.
Tool Part No.
Lbs. (N)
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
100
1000
1000 50000
100
1000
1000 25000
100
1000
1000 10000
100
1000
1000 10000
100
1000
1000
5000
4.00
(102)
100
1000
1000
5000
2.00
(51)
50
500
250
2500
50
500
250
2500
50
500
250
2500
Bulk
Ctn.
Qty.
Miniature Cross Section
PLC1M-S4-C
4.3
(110)
.100
(2.5)
Intermediate Cross Section
PLC1.5I-C
6.1
(156)
.135
(3.4)
Standard Cross Section
PLC2S-S6-C
7.9
(201)
PLC2S-S10-C
7.9
(201)
PLC3S-S10-C
12.0
(305)
PLC4S-S10-C
15.0
(381)
.190
(4.8)
.373
(9.5)
50
(222)
GS2B, GS4H
PPTS, STS2
or STH2
Heavy Cross Section
PLC2H-S25-L
9.0
(228)
PLC3H-S25-L
12.0
(305)
PLC4H-S25-L
15.1
(384)
.300
(7.6)
.075
(1.9)
.265
(6.7)
.500
(12.7)
.260
(6.6)
1/4
(M6)
3.00
(76)
120
(534)
GS4H, GS4EH
PPTEH
or STH2
4.00
(102)
Most commonly used parts appear in BOLD.
For Heavy Duty Vibration and Loading Applications
Tie features reinforcing ribs between tie head and mounting boss that strengthen and stabilize this area of the tie, making it ideal for heavy duty
applications.
PLCR4H-S25-L
8
15.1
(384)
.300
(7.6)
.075
(1.9)
.265
(6.7)
.500
(12.7)
.260
(6.6)
1/4
(M6)
4.00
(102)
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to Page 41.
120
(534)
GS4H, GS4EH,
PPTEH, STH2
50
500
250
2500
For colors and other materials,
See Page 36 to 39.
Nylon 6.6 Marker Ties (PLMSeries)
Marker Ties fasten and identify bundles at the same time. They can be
marked with PANDUIT Marker Pens or you can use Panduit’s custom hot
stamping service.
PAN-TY ®
Nylon 6.6
Marker Ties
MINIATURE
CROSS SECTION
PLM1M
PLM2M
Length Width
A
B
Part Number† In. (mm) In. (mm)
PLM1M-C
3.9
(99)
PLM2M-C
8.0
(203)
PLF1M-C
4.3
(109)
PLF1MA-C
5.1
(130)
PLF1MB-C
4.0
(102)
Thickness
C
In. (mm)
PLF1M
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
.035
(.9)
.098
(2.5)
Write-on
Area
In. (mm)
.26 x .95
(6.6 x 24.1)
.154
(3.9)
.180
(4.6)
.045
(1.1)
PLF1MA
Max.
Bundle
Dia.
In. (mm)
PLF1MB
Min. Loop Recommended
PANDUIT ®
Std.
Tensile
Installation
Pkg.
Strength
Tool Part No.
Qty.
Lbs. (N)
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
.75
(20)
100
1000
1000 25000
2.0
(51)
100
1000
1000 25000
100
1000
1000 25000
.31 x .75
(7.9 x 19.1)
.87
(22)
.76 x 1.04
(19.1 x 26.4)
.87
(22)
100
1000
1000 10000
.31 x .92
(7.9 x 23.4)
.75
(20)
100
1000
1000 10000
100
1000
500
10000
100
1000
500
5000
50
500
500
2500
50
500
500
2500
18
(80)
GS2B, PPTS
or STS2
Most commonly used parts appear in BOLD.
STANDARD
CROSS SECTION
PLM2S
PLM4S
PLM2S-C
7.4
(188)
PLM4S-C
14.6
(371)
PL2M2S-L
7.4
(188)
PL3M2S-L
7.4
(188)
.185
(4.7)
.052
(1.3)
.220
(5.6)
PL2M2S
.320
(8.1)
PL3M2S
.44 x .87
(11.1 x 22.1)
1.75
(45)
.44 x 2.00
(11.1 x 50.8)
4.00
(102)
.87 x 1.07
(22.1 x 27.2)
1.75
(45)
.87 x 1.79
(22.1 x 45.5)
1.75
(45)
50
(222)
GS2B, GS4H
PPTS, STS2
or STH2
Marker Ties are also available in weather resistant black nylon for outdoor use. May be marked with
PANDUIT PX-10 White Marking Pen. Most commonly used parts appear in BOLD.
MARKERS ON REELS
(2000 reel - 2 reels/pkg.)
PLM1M-4KR
PLF1MB-4KR
3.9
(99)
4.0
(102)
.098
(2.5)
.035
(.9)
.045
(1.1)
.154
(3.9)
.180
(4.6)
.26 x .95
(6.6 x 24.1)
.87
(22)
.31 x .92
(7.9 x 23.4)
.75
(19)
18
(80)
—
—
4000
—
—
—
4000
—
Custom Hot Stamping Available; See Page 35.
Marking Pens Available; See Page 100.
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to Page 41.
For colors and other materials,
See Page 36 to 39.
9
Nylon 6.6 Winged Push Mount Ties (PLWP Series)
PAN-TY ® Nylon 6.6
Push Mount Ties
Push mount ties are used to attach a bundle to another surface such as a
control panel. The mount portion is easily pressed into a pre-drilled hole
and locks in place. Push mount tie wings provide constant tension when
installed in less than maximum panel thickness creating a stable, secure
fixture and rattle-free installation.
Winged Push Mount Ties
Part Number†
Head
Length Width Thickness Height
Cross
A
B
C
D
Section In. (mm) In. (mm) In. (mm) In. (mm)
Max.
Max.
Hole
Panel
Bundle
Dia.
Thickness
Dia.
In. (mm) In. (mm) In. (mm)
Min. Loop Recommended
PANDUIT ®
Std.
Tensile
Strength Installation Tool Pkg.
Part No.
Qty.
Lbs. (N)
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
500
5000
100
1000
500
5000
100
1000
500
5000
100
1000
500
5000
—
—
500
5000
100
1000
500
5000
100
1000
500
5000
100
1000
500
5000
100
1000
500
5000
100
1000
500
5000
—
—
500
5000
—
—
250
2500
—
—
250
2500
100
1000
500
5000
100
1000
500
5000
100
1000
500
5000
—
—
500
5000
100
1000
500
5000
—
—
500
5000
—
—
500
5000
100
1000
500
5000
—
—
500
5000
—
—
500
5000
—
—
250
2500
—
—
250
2500
Style PLWP (locking)
PLWP1M-C
Min.
PLWP1.5I-C
Int.
PLWP1S-C
PLWP1SA-C
PLWP1SB-D
PLWP1.5S-C
PLWP1.5SA-C
Std.
PLWP1.5SB-C
PLWP2S-C
PLWP2SA-C
PLWP2SB-D
PLWP2H-TL
4.3
(109)
6.0
(152)
5.2
(132)
5.1
(130)
5.2
(132)
6.8
(173)
6.7
(170)
6.7
(170)
7.8
(198)
7.7
(196)
7.8
(198)
8.9
(226)
12.0
(305)
.098
(2.5)
.135
(3.4)
.190
(4.8)
.044
(1.1)
.045
(1.2)
.052
(1.3)
.220
(5.6)
.280
(7.1)
.370
(9.4)
.187
(4.7)
.187
(4.7)
.252
(6.4)
.187
(4.7)
.187
(4.7)
.252
(6.4)
.187
(4.7)
.187
(4.7)
.252
(6.4)
.187
(4.7)
.187
(4.7)
.093
(2.4)
.093
(2.4)
.105
(2.7)
.093
(2.4)
.157
(4.0)
.105
(2.7)
.093
(2.4)
.157
(4.0)
.105
(2.7)
.093
(2.4)
.157
(4.0)
.300
(7.6)
.075
(1.9)
.370
(9.4)
.252
(6.4)
.105
(2.7)
6.0
.135
(152)
(3.4)
5.2
PRWP1S-C
(132)
5.1
PRWP1SA-C
(130)
5.2
PRWP1SB-D
(132)
6.8
PRWP1.5S-C
(173)
6.7
.190
PRWP1.5SA-D
Std.
(170)
(4.8)
6.8
PRWP1.5SB-D
(173)
7.8
PRWP2S-C
(198)
7.7
PRWP2SA-D
(196)
7.8
PRWP2SB-D
(198)
8.9
PRWP2H-TL
(226)
.300
Hvy.
(7.6)
12.0
PRWP3H-TL
(305)
Most commonly used parts appear in BOLD.
.045
(1.2)
.220
(5.6)
.187
(4.7)
.252
(6.4)
.187
(4.7)
.187
(4.7)
.252
(6.4)
.187
(4.7)
.187
(4.7)
.252
(6.4)
.187
(4.7)
.187
(4.7)
.093
(2.4)
.105
(2.7)
.093
(2.4)
.157
(4.0)
.105
(2.7)
.093
(2.4)
.157
(4.0)
.105
(2.7)
.093
(2.4)
.157
(4.0)
.252
(6.4)
.105
(2.7)
PLWP3H-TL
Hvy.
.87
(22)
1.25
(32)
1.00
(25)
1.00
(25)
1.00
(25)
1.50
(38)
1.50
(38)
1.50
(38)
1.75
(45)
1.75
(45)
1.75
(45)
2.00
(51)
3.00
(76)
18
(80)
GS2B, PPTS
or STS2
40
(177)
50
(222)
120
(534)
GS2B, GS4H,
PPTS, STS2
or STH2
GS4H, STH2
PPTEH
Style PRWP (releasable)
PRWP1.5I-C
10
Int.
.052
(1.3)
.075
(1.9)
.370
(9.4)
.370
(9.4)
1.25
(32)
1.00
(25)
1.00
(25)
1.00
(25)
1.50
(38)
1.50
(38)
1.50
(38)
1.75
(45)
1.75
(45)
1.75
(45)
2.00
(51)
3.00
(76)
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to 41.
40
(177)
50
(222)
120
(534)
Hand Installed
only
For colors and other materials,
See Page 36 to 39.
Heat Stabilized Nylon 6.6 Push Mount Ties
Center-mounted wing push-mount cable ties center the bundle on all bundle
diameters.
PAN-TY ®
Center Mounted
Heat Stabilized
Nylon 6.6 Wing
Push Mount Ties
PLWP30, 40 50SC winged push-mount cable
ties are for normal wire bundles.
PLWP30, 40, 50SD winged push-mount cable
ties with convoluted tubing bump that prevents
lateral and axial movement on convoluted
tubing.
PLWP30, 40, 50SE winged push-mount cable
ties with convoluted tubing bump that prevents
lateral movement on convoluted tubing.
Part Number†
BUNDLE DIAMETERS from
.19" to 1.97"
(4.8 to 50 mm)
Head
Max.
Length Width Thickness Height
Hole
Panel
Bundle
Cross
A
B
C
D
Dia. Thickness
Dia.
Section In. (mm) In. (mm) In. (mm) In. (mm) In. (mm) In. (mm) In. (mm)
Min. Loop Recommended
PANDUIT ®
Std.
Tensile
Strength Installation Tool Pkg.
Part No.
Qty.
Lbs. (N)
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
PLWP30SC-D30
5.8
(147.6)
1.18
(30)
—
—
500
5000
PLWP40SC-D30
7.0
(178.6)
1.58
(40)
—
—
500
5000
PLWP50SC-D30
8.2
(208.3)
1.97
(50)
—
—
500
5000
PLWP30SD-D30
5.8
(147.6)
1.18
(30)
—
—
500
5000
—
—
500
5000
PLWP40SD-D30
Std.
7.0
(178.6)
.19
(4.8)
.050
(1.27)
.220
(5.6)
.283
(7.2)
.118
(3.0)
1.58
(40)
50
(222)
GS2B, GS4H,
PPTS, STS2,
or STH2
PLWP50SD-D30
8.2
(208.3)
1.97
(50)
—
—
500
5000
PLWP30SE-D30
5.8
(147.6)
1.18
(30)
—
—
500
5000
PLWP40SE-D30
7.0
(178.6)
1.58
(40)
—
—
500
5000
PLWP50SE-D30
8.2
(208.3)
1.97
(50)
—
—
500
5000
Most commonly used parts appear in BOLD.
PAN-TY ®
Nylon 6.6
Push Mount Ties
Style PLP
Economical push mount tie style.
PLP1.5I-C
Int.
PLP2S-C
.135
(3.4)
.045
(1.1)
.236
(6.0)
.187
(4.7)
.093
(2.4)
5.3
(134)
PLP1S-C
PLP1.5S-C
6.13
(155)
Std.
6.7
(170)
1.25
(31.8)
40
(178)
GS2B, PPTS
orSTS2
1.00
(25.4)
.180
(4.6)
7.87
(199)
.050
(1.3)
.354
(9.0)
.250
(6.4)
.125
(3.2)
1.50
(38)
50
(222)
1.75
(44.5)
GS2B, GS4H
PPTS, STS2
or STH2
100
1000
1000 25000
100
1000
1000 10000
100
1000
1000 10000
100
1000
1000 10000
Most commonly used parts appear in BOLD.
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for PLP parts is Standard Package Quantity. For Bulk Package Part Numbers, See Page 40 to 41 .
Part Number shown for PLWP parts is Bulk Package Quantity. Releasable styles available—contact factory.
For colors and other materials,
See Page 36 to 39.
11
Heat Stabilized Nylon 6.6 Winged Push Mount Ties
Ladder Style
Heat Stabilized
Nylon 6.6 Wing
Push Mount Ties
Unique releasable ladder design
eliminates the need for multiple
clamp sizes.
Part Number†
Head
Length Width Thickness Height
Cross
A
B
C
D
Section In. (mm) In. (mm) In. (mm) In. (mm)
4.7
(120)
PRLWP30S-C30
PRLWP30SH7D30
Std.
Max.
Panel
Bundle
Thickness
Dia.
In. (mm) In. (mm)
.47
(12)
4.87
(124)
.38
(9.7)
.050
(1.3)
7.1
(180)
PRLWP50S-C30
Hole
Dia.
In. (mm)
.48
(12.2)
Min. Loop Recommended
PANDUIT ®
Std.
Tensile
Strength Installation Tool Pkg.
Part No.
Qty.
Lbs. (N)
1.43
(36)
.248 to .264
(6.3 to 6.7)
.118
(3.0)
.47
(12)
1.43
(36)
35
(156)
Hand Installed
Only
2.18
(55)
Packaging*
Std.
Ctn.
Qty.
Bulk Bulk
Pkg. Ctn.
Qty. Qty.
100
5000
500
5000
—
—
500
5000
100
5000
500
5000
DOME-TOP ® BARB-TY ® Cable Ties/PAN-TY ® Cable Ties/ Clamp
Ties/Marker Ties in Convenient Small Packages
For small jobs where you don’t need a standard size package of ties.
Length
A
In. (mm)
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
6.1
(155)
25
250
8.0
(203)
25
250
12.0
(305)
10
15.1
(384)
10
100
14.9
(378)
10
100
10.1
(258)
10
100
14.1
(359)
10
100
PLT.7M-Q
3.1
(79)
25
250
PLT1M-Q
PLT1M-Q0
3.9
(99)
25
250
4.0
(102)
25
250
PLT1.5M-Q
5.6
(142)
25
250
PLT2M-Q
8.0
(203)
25
250
5.6
(142)
25
250
8.0
(203)
25
250
11.4
(290)
10
100
14.6
(371)
10
100
7.4
(188)
25
250
Part Number
Type
BT1.5I-Q
BT1.5I-Q0
BT2S-Q
BT2S-Q0
Int.
DOME-TOP
BARB-TY
Cable
Ties
BT3S-X
BT3S-X0
BT4S-X
BT4S-X0
Cross
Section
BT4LH-X
BT4LH-X0
Std.
Lt. Hvy.
IT965-X0
IT9100-X0
In-Line
Cable Ties
PLT1M-Q76
PLT1.5I-Q
PLT1.5I-Q0
Hvy.
Min.
PAN-TY
Cable
Ties
PLT2I-Q
Int.
PLT3I-X
PLT4I-X
PLT2S-Q
PLT2S-Q0
12
Std.
Part Number
Length
A
In. (mm)
PLT2S-Q53
PLT2S-Q54
100
Type
Cross
Section
PLT2S-Q55
PAN-TY
Cable Ties
Std.
7.4
(188)
PLT2S-Q59
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
25
250
25
250
25
250
25
250
PLT2S-X76
7.4
(188)
10
100
PLT2S-X702
7.4
(188)
10
100
11.5
(292)
10
100
14.5
(368)
10
100
14.5
(368)
10
100
4.8
(122)
25
250
7.4
(188)
25
250
11.5
(292)
10
100
14.5
(368)
10
100
Hvy.
14.5
(368)
10
100
Min.
4.3
(110)
25
250
Std.
7.9
(201)
25
250
Min.
3.9
(99)
25
250
PLT3S-X
Std.
PAN-TY
Cable Ties
PLT4S-X
PLT4S-X0
PLT4H-X
Hvy.
PLT4H-X0
PRT1S-Q
PRT2S-Q
PRT3S-X
PRT4S-X
PAN-TY
Releasable
Cable
Ties
PRT4H-X
PLC1M-S4-Q
PLC2S-S10-Q
PLM1M-Q
PAN-TY
Clamp Ties
PAN-TY
Marker Tie
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to Page 41.
Std.
For colors and other materials,
See Page 36 to 39.
Weather Resistant Cable Ties
PAN-TY ®
Weather
Resistant Nylon
Cable Ties
Weather resistant nylon has greater resistance to ultraviolet light which
damages natural nylon. Where adverse outdoor conditions exist, see
technical/application data section (Page 58 to 62) to select proper cable
tie material for specific applications.
For Outdoor Use
SUB-MINIATURE AND
MINIATURE
CROSS SECTION
Part Number†
Length
Width
A
B
In. (mm) In. (mm)
Packaging*
Thickness
C
In. (mm)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
100
1000
1000
50000
100
1000
1000
50000
100
1000
1000
50000
100
1000
1000
25000
PLT.6SM-C0
2.8
(71)
.070
(1.8)
.030
(.76)
.095
(2.4)
.125
(3.2)
.60
(15)
8
(36)
PLT1M-C0
3.9
(99)
.098
(2.5)
.043
(1.1)
.154
(3.9)
.180
(4.6)
.87
(22)
18
(80)
PLT1.5M-C0
5.6
(142)
.098
(2.5)
.043
(1.1)
.154
(3.9)
.180
(4.6)
1.25
(32)
18
(80)
PLT2M-C0
8.0
(203)
.098
(2.5)
.043
(1.1)
.154
(3.9)
.180
(4.6)
2.00
(51)
18
(80)
GS2B, PPTS
or STS2
INTERMEDIATE CROSS
SECTION
PLT1.5I-C0
5.6
(142)
.142
(3.6)
.045
(1.2)
.240
(6.1)
1.38
(35)
100
1000
1000
25000
PLT2I-C0
8.0
(203)
.142
(3.6)
.045
(1.2)
.240
(6.1)
2.00
(51)
100
1000
1000
25000
PLT2.5I-C0
9.7
(248)
.142
(3.6)
.052
(1.3)
.240
(6.1)
2.50
(64)
100
1000
1000
10000
PLT3I-C0
11.4
(290)
.145
(3.7)
.052
(1.3)
.280
(6.6)
3.00
(76)
100
1000
1000
10000
PLT4I-C0
14.6
(371)
.145
(3.7)
.052
(1.3)
.280
(6.6)
4.00
(102)
100
1000
1000
10000
.180
(4.6)
40
(178)
GS2B, PPTS
or STS2
STANDARD CROSS
SECTION
PLT1S-C0
4.8
(122)
.316
(8.0)
1.00
(25)
100
1000
1000
10000
PLT1.5S-C0
6.2
(157)
.316
(8.0)
1.50
(38)
100
1000
1000
10000
PLT2S-C0
7.4
(188)
.316
(8.0)
1.88
(48)
100
1000
1000
10000
PLT2.5S-C0
9.8
(249)
.337
(8.6)
2.50
(64)
100
1000
1000
10000
100
1000
1000
10000
PLT3S-C0
11.5
(292)
PLT3.5S-C0
GS2B, GS4H,
PPTS, STS2
or STH2
.337
(8.6)
3.00
(76)
13.0
(330)
.337
(8.6)
3.50
(89)
100
1000
1000
10000
PLT4S-C0
14.5
(368)
.337
(8.6)
4.00
(102)
100
1000
1000
5000
PLT4.5S-C0
15.5
(394)
.337
(8.6)
4.50
(114)
100
1000
1000
5000
PLT5S-C0
17.5
(445)
.337
(8.6)
5.00
(127)
100
500
1000
5000
.190
(4.8)
.052
(1.3)
.220
(5.6)
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to 41.
50
(222)
or colors and other materials, See Page 36 to 39..
Most commonly used parts appear in BOLD.
13
Weather Resistant Cable Ties
LIGHT HEAVY AND
HEAVY
CROSS SECTION
Part Number†
Length
Width
A
B
In. (mm) In. (mm)
Thickness
C
In. (mm)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
120 Lb. Minimum Loop Tensile
PLT2H-L0
8.1
(206)
.290
(7.4)
2.00
(51)
50
500
250
2500
PLT2.5H-L0
10.0
(254)
.290
(7.4)
2.50
(64)
50
500
250
2500
PLT3H-L0
11.4
(290)
.290
(7.4)
3.00
(76)
50
500
250
2500
PLT4H-L0
14.5
(368)
.290
(7.4)
4.00
(102)
50
500
250
2500
PLT6LH-L0
21.9
(556)
50
500
100
2000
PLT7LH-L0
24.7
(627)
.325
(8.3)
7.00
(178)
50
500
100
2000
PLT8LH-L0
27.6
(701)
.325
(8.3)
8.00
(203)
50
500
100
2000
PLT9LH-L0
30.5
(775)
.325
(8.3)
9.00
(229)
50
500
100
1000
PLT10LH-L0
34.3
(871)
.325
(8.3)
10.31
(262)
50
1000
100
1000
5.00
(127)
50
500
250
2500
50
500
250
2000
50
500
100
1000
25
500
100
500
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
.300
(7.6)
.075
(1.9)
.325
(8.3)
.480
(12.2)
6.00
(152)
120
(534)
GS4H, GS4EH
PPTEH or
STH2
175 Lb. Minimum Loop Tensile
PLT5H-L0
17.7
(450)
PLT6H-L0
20.9
(530)
PLT8H-L0
30.6
(779)
PLT13H-Q0
43.3
(1100)
.350
(8.9)
.078
(2.0)
.340
(8.8)
.560
(14.2)
6.00
(152)
9.00
(229)
175
(778)
GS4H, GS4EH
PPTEH or
STH2
13.00
(330)
Most commonly used parts appear in BOLD.
PAN-TY ®
Locking Weather
Resistant Nylon
Lashing Ties
Part Number†
Length
Width
A
B
In. (mm) In. (mm)
Thickness
C
In. (mm)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Weather Resistant Nylon 6.6 For Outdoor Use - resists ultraviolet light
PLT2EH-Q0
9.0
(229)
.075
(1.9)
2.0
(51)
25
250
100
1000
PLT5EH-Q0
20.1
(510)
.075
(1.9)
5.0
(127)
25
250
100
1000
PLT6EH-Q0
22.2
(563)
25
250
100
1000
25
250
100
1000
.500
(12.7)
.075
(1.9)
.085
(2.2)
.40
(10.2)
.80
(20.3)
6.0
(152)
8.0
(203)
250
(1112)
GS4H, GS4EH
PPTEH or
STH2
PLT8EH-Q0
28.3
(718)
PLT10EH-Q0
34.2
(868)
.085
(2.2)
10.0
(254)
25
250
100
500
PLT12EH-Q0
40.1
(1018)
.085
(2.2)
12.0
(305)
25
250
100
500
Most commonly used parts appear in BOLD.
14
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to 41.
For colors and other materials,
See Page 36 to 39.
Lashing Ties
PAN-TY ®
Releasable
Weather
Resistant Nylon
Lashing Ties
Part Number†
Length
A
In. (mm)
Width
B
In. (mm)
Thickness
C
In. (mm)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
Weather Resistant Nylon 6.6 For Outdoor Use - resists ultraviolet light
PRT2EH-Q0
9.0
(229)
.075
(1.9)
2.0
(51)
25
250
100
1000
PRT5EH-Q0
20.1
(510)
.075
(1.9)
5.0
(127)
25
250
100
1000
PRT6EH-Q0
22.2
(563)
25
250
100
1000
25
250
100
1000
.500
(12.7)
.075
(1.9)
.085
(2.2)
.40
(10.2)
.80
(20.3)
6.0
(152)
8.0
(203)
250
(1112)
Hand Installed
Only
PRT8EH-Q0
28.3
(718)
PRT10EH-Q0
34.2
(868)
.085
(2.2)
10.0
(254)
25
250
100
500
PRT12EH-Q0
40.1
(1018)
.085
(2.2)
12.0
(305)
25
250
100
500
Most commonly used parts appear in BOLD.
Lashing Tie
Mounting Clip
Part Number†
MCEH-S25-C0
Used
With
Cable
Ties
Lashing
Ties “EH” Cross
Section (see pgs.
6, 7, 14 & above)
Converts PANDUIT PAN-TY Lashing Ties into clamps. Easily snaps in
place for a secure clamp.
Dimensions
Inches (mm)
A
B
See drawing
Packaging*
C
Material
Color
WeatherResistant
Nylon
Black
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to 41.
Where
Used
Mounting
Method
Outdoors or
indoors
1/4" (M6)
screw
(except
flathead)
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
100
—
For colors and other materials,
See Page 36 to 39.
15
Weather Resistant Cable Ties
Releasable Cable
Ties (PRT Series)
The extended tab end of releasable cable ties permits easy release and
reuse even after tie has been pulled up snug by hand. Releasable ties
are particularly useful in harnessing where changes are anticipated
during development, production or servicing in the field.
To release, grasp the head of the
cable tie, deflect release tab and
pull the cable tie away from the
bundle.
Part Number†
Cross
Section
Length
Width Thickness
A
B
C
In. (mm) In. (mm) In. (mm)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
Standard Cross Section
PRT1S-C0
4.8
(122)
.316
(8.0)
1.00
(25)
100
1000
100
10000
PRT1.5S-C0
6.3
(160)
.316
(8.0)
1.50
(38)
100
1000
100
10000
.316
(8.0)
1.88
(48)
100
1000
100
10000
100
1000
100
10000
100
1000
100
5000
50
500
250
2500
50
500
250
2500
50
500
250
2500
PRT2S-C0
Std.
7.4
(188)
.190
(4.8)
.052
(1.3)
.219
(5.6)
PRT3S-C0
11.5
(292)
.337
(8.6)
3.00
(76)
PRT4S-C0
14.5
(368)
.337
(8.6)
4.00
(102)
50
(222)
Hand Installed
Only
Heavy Cross Section
8.4
(213)
PRT2H-L0
PRT3H-L0
PRT4H-L0
16
Hvy.
11.4
(290)
14.5
(368)
2.00
(51)
.300
(7.6)
.075
(1.9)
.300
(7.6)
.480
(12.2)
3.00
(76)
4.00
(102)
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to 41.
80
(356)
For colors and other materials,
See Page 36 to 39.
Weather Resistant Clamp Ties
Clamps are used to attach a bundle to another surface such as a control
panel, wall or ceiling using another fastener. The design allows for bundling
before or after screwing clamp in place.
PAN-TY ®
Weather
Resistant Nylon
Clamp Ties
Part Number†
Boss
Height
D
In. (mm)
Head
Width
E
In. (mm)
Hole
Dia.
F
In. (mm)
Screw
Size
Max.
Bundle
Dia.
In. (mm)
.045
(1.2)
.153
(3.9)
.239
(6.1)
.118
(3.0)
#4
(M2.5)
.75
(20)
18
(80)
GS2B, PPTS
or STS2
.045
(1.2)
.166
(4.2)
.335
(8.5)
.172
(4.4)
#8
(M4)
1.25
(32)
40
(178)
GS2B, PPTS
or STS2
.047
(1.2)
.160
(4.1)
.145
(3.7)
#6
(M3)
1.84
(46.7)
.047
(1.2)
.160
(4.1)
.206
(5.2)
#10
(M5)
1.84
(46.7)
.052
(1.3)
.220
(5.6)
.206
(5.2)
#10
(M5)
3.00
(76)
.052
(1.3)
.220
(5.6)
.206
(5.2)
#10
(M5)
Length Width Thickness
A
B
C
In. (mm) In. (mm) In. (mm)
Min. Loop Recommended
PANDUIT ®
Std.
Tensile
Installation
Pkg.
Strength
Tool Part No.
Qty.
Lbs. (N)
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
100
1000
1000 50000
100
1000
1000 25000
100
1000
1000 10000
100
1000
1000 10000
100
1000
1000
5000
4.00
(102)
100
1000
1000
5000
2.00
(51)
50
500
250
2500
50
500
250
2500
50
500
250
2500
Bulk
Ctn.
Qty.
Miniature Cross Section
PLC1M-S4-C0
4.3
(110)
.100
(2.5)
Intermediate Cross Section
PLC1.5I-S8-C0
6.1
(156)
.135
(3.4)
Standard Cross Section
PLC2S-S6-C0
7.9
(201)
PLC2S-S10-C0
7.9
(201)
PLC3S-S10-C0
12.0
(305)
PLC4S-S10-C0
15.0
(381)
.190
(4.8)
.390
(10.0)
50
(222)
GS2B, GS4H
PPTS, STS2
or STH2
Heavy Cross Section
PLC2H-S25-L0
9.0
(228)
PLC3H-S25-L0
12.0
(305)
PLC4H-S25-L0
15.1
(384)
.300
(7.6)
.075
(1.9)
.265
(6.7)
.500
(12.7)
.260
(6.6)
1/4
(M6)
3.00
(76)
120
(534)
GS4H, GS4EH
PPTEH
or STH2
4.00
(102)
Most commonly used parts appear in BOLD.
For Heavy Duty Vibration and Loading Applications
Tie features reinforcing ribs between tie head and mounting boss that strengthen and stabilize this area of
the tie, making it ideal for heavy duty applications.
PLCR4H-S25-L0
15.1
(384)
.300
(7.6)
.075
(1.9)
.265
(6.7)
.500
(12.7)
.260
(6.6)
1/4
(M6)
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to 41.
Part Number shown for Center Mounted Clamp Ties is Bulk Package Quantity.
4.00
(102)
120
(534)
GS4H, GS4EH,
PPTEH, STH2
50
500
250
For colors and other materials,
See Page 36 to 39.
2500
17
Polypropylene Cable Ties
For chemical resistance in outdoor applications that are unsuitable for
nylon and that do not require high loop tensile strengths. Color is black.
PAN-TY ®
Weather Resistant
Polypropylene
Cable Ties for
Outdoor Use
Part Number†
Cross
Section
PLT1M-M100
Min.
PLT1.5I-M100
Int.
Std.
Hvy.
PLT3S-M109
.337
(8.6)
3.00
(76)
.337
(8.6)
4.00
(102)
1000
5000
2.00
(51)
250
2500
250
2500
4.00
(102)
250
2500
2.00
(51)
100
1000
100
1000
100
1000
100
1000
11.5
(292)
11.4
(290)
20.1
(510)
22.2
(563)
.190
(4.8)
.300
(7.6)
.075
(1.9)
.220
(5.6)
.290
(7.4)
.480
(12.2)
.075
(1.9)
.500
(12.7)
.075
(1.9)
.075
(1.9)
.40
(10.2)
.80
(20.3)
.085
(2.2)
3.00
(76)
5.00
(127)
6.00
(152)
30
(133)
50
(222)
90
(400)
GS2B, GS4H,
PPTS, STS2
or STH2
GS4H, PPTEH
or STH2
Hand
Installed
5
5
—
8.00
(203)
3.9
(99)
.098
(2.5)
.043
(1.1)
.154
(3.9)
.180
(4.6)
.87
(22)
11
(49)
5.6
(142)
.142
(3.6)
.045
(1.2)
.180
(4.6)
.240
(6.1)
1.38
(35)
18
(80)
.316
(8.0)
1.88
(48)
11.5
(292)
11.4
(290)
PRT2EH-C109
9.0
(229)
18
.052
(1.3)
GS2B, PPTS
or STS2
For chemical resistance in indoor applications. Can be used in areas
where hydrochloric acid, salts and bases are present. Natural
polypropylene cable ties have a distinctive green color.
14.5
(368)
PRT8EH-C109
10000
1.88
(48)
PLT4H-TL109
PRT6EH-C109
1000
.316
(8.0)
8.4
(213)
Extra
Heavy
(Releasable)
10000
18
(80)
PLT2H-TL109
PRT5EH-C109
1000
1.38
(35)
14.5
(368)
Hvy.
25000
.240
(6.1)
PLT4S-M109
PLT3H-TL109
1000
.180
(4.6)
7.4
(188)
Std.
3
.045
(1.2)
Natural
Polypropylene
Cable Ties for
Indoor Use
PLT2S-M109
50000
.142
(3.6)
28.3
(718)
Int.
1000
5.6
(142)
9.0
(229)
PLT1.5I-M109
2
11
(49)
PRT2EH-C100
Min.
Bulk
Ctn.
Qty.
.87
(22)
14.5
(368)
PRT8EH-C100
Packaging*
Bulk
Pkg.
Qty.
.180
(4.6)
PLT4H-TL100
Extra
Heavy
(Releasable)
Recommended
PANDUIT ®
Installation Tool Tool
Part No.
Setting
.154
(3.9)
8.4
(213)
PLT1M-M109
Min. Loop
Tensile
Strength
Lbs. (N)
.043
(1.1)
PLT2H-TL100
PRT6EH-C100
Max.
Bundle
Dia.
In. (mm)
.098
(2.5)
14.5
(368)
PRT5EH-C100
Head
Width
E
In. (mm)
3.9
(99)
PLT4S-M100
PLT3H-TL100
Head
Height
D
In. (mm)
7.4
(188)
PLT2S-M100
PLT3S-M100
Length
Width Thickness
A
B
C
In. (mm) In. (mm) In. (mm)
20.1
(510)
22.2
(563)
28.3
(718)
.190
(4.8)
.300
(7.6)
.052
(1.3)
.075
(1.9)
.220
(5.6)
.290
(7.4)
.075
(1.9)
.075
(1.9)
.085
(2.2)
.40
(10.2)
GS2B, GS4H,
PPTS, STS2
or STH2
2
1000
50000
3
1000
25000
1000
10000
1000
10000
.337
(8.6)
3.00
(76)
.337
(8.6)
4.00
(102)
1000
5000
2.00
(51)
250
2500
250
2500
4.00
(102)
250
2500
2.00
(51)
100
1000
100
1000
100
1000
100
1000
.480
(12.2)
.075
(1.9)
.500
(12.7)
GS2B, PPTS
or STS2
.80
(20.3)
3.00
(76)
5.00
(127)
6.00
(152)
8.00
(203)
30
(133)
50
(222)
90
(400)
GS4H, PPTEH
or STH2
Hand
Installed
5
5
—
*Order the Number of Pieces Required in Multiples of Packaging Quantities. Most commonly used parts appear in BOLD.
†Part Number shown for Bulk Package Quantity.
For best results, use tool tensions at the low end of the adjustment range, i.e. Std. Cable Ties installed at tool setting 5, to arrive at optimum installation tension.
Flame Retardant Nylon 6.6 Cable Ties
PAN-TY ®
Flame Retardant
Nylon 6.6
Cable Ties and
Marker Ties
PLM
Flame Retardant Nylon 6.6 meets the requirements of U.L. 94V-0. Can be
used with flame retardant cable tie mounts. See Page 84 .
PLT
PLF
Part Number†
Cross
Section
Length
Width Thickness
A
B
C
In. (mm) In. (mm) In. (mm)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
Marker
Write-on
Area
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
1000
25000
1000
25000
1000
25000
1000
25000
1000
25000
1000
25000
1000
10000
1000
5000
250
2500
1000
25000
1000
25000
1000
10000
1000
5000
Off White Flame Retardant Nylon 6.6
PLF1M-M69
PLM1M-M69
PLT1M-M69
Min.
PLT2M-M69
PLT1.5I-M69
PLT2I-M69
Int.
PLT2S-M69
PLT4S-M69
Std.
PLT4H-TL69
Hvy.
4.3
(109)
.098
(2.5)
.045
(1.1)
.154
(3.9)
.180
(4.6)
.31 x .75
(7.9 x 19.1)
.87
(22)
3.9
(99)
.098
(2.5)
.035
(.9)
.154
(3.9)
.180
(4.6)
.26 x .95
(6.6 x 24.1)
.75
(20)
4.0
(102)
.098
(2.5)
.043
(1.1)
.154
(3.9)
.188
(4.8)
8.0
(203)
.098
(2.5)
.043
(1.1)
.154
(3.9)
.188
(4.8)
5.6
(142)
.139
(3.5)
.044
(1.1)
.177
(4.5)
.239
(6.1)
8.0
(203)
.142
(3.6)
.044
(1.1)
.177
(4.5)
.239
(6.1)
7.4
(188)
.190
(4.8)
.055
(1.4)
.220
(5.6)
.320
(8.1)
14.5
(368)
.190
(4.8)
.052
(1.3)
.220
(5.6)
.337
(8.6)
14.6
(371)
0.3
(7.6)
.075
(1.9)
.360
(9.1)
.480
(12.2)
4.0
(102)
.098
(2.5)
.043
(1.1)
.154
(3.9)
.188
(4.8)
8.0
(203)
.098
(2.5)
.043
(1.1)
.154
(3.9)
.188
(4.8)
7.4
(188)
.190
(4.8)
.055
(1.4)
.220
(5.6)
.320
(8.1)
14.5
(368)
.190
(4.8)
.052
(1.3)
.220
(5.6)
.337
(8.6)
.87
(22)
—
18
(80)
GS2B, PPTS
or STS2
2.00
(51)
1.38
(35)
—
2.00
(51)
1.88
(48)
—
4.00
(102)
4.00
(102)
—
40
(178)
GS2B, PPTS
or STS2
50
(222)
GS2B, GS4H,
PPTS, STS2
or STH2
120
(533)
GS4H, GS4EH,
PPTEH or
STH2
18
(80)
GS2B, PPTS
or STS2
50
(222)
GS2B, GS4H,
PPTS, STS2
or STH2
Black Flame Retardant Nylon 6.6
PLT1M-M60
PLT2M-M60
Min.
PLT2S-M60
PLT4S-M60
Std.
PAN-TY ®
Weather Resistant
Nylon 12
Cable Ties
Part Number†
Cross
Section
PLT1.5I-M120
Min.
PLT2S-M120
PLT4S-M120
Std.
.87
(22)
—
2.00
(51)
1.88
(48)
—
4.00
(102)
For high moisture, corrosive (zinc chloride and dilute acids) and low
temperature indoor or outdoor applications.
Length
A
In. (mm)
Width
B
In. (mm)
Thickness
C
In. (mm)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
5.6
(142)
.142
(3.6)
.045
(1.2)
.180
(4.6)
.240
(6.1)
1.38
(35)
25
(111)
GS2B, PPTS
or STS2
7.4
(188)
.190
(4.8)
.052
(1.3)
.220
(5.6)
.316
(8.0)
1.88
(48)
40
(178)
14.5
(368)
.190
(4.8)
.052
(1.3)
.220
(5.6)
.337
(8.6)
4.00
(102)
40
(178)
PLT4H-TL120
Hvy.
14.5
(368)
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
4.00
(102)
90
(399)
PLT8LH-C120
Lt.
Hvy.
27.6
(701)
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
8.00
(203)
90
(399)
GS2B, GS4H,
PPTS, STS2
or STH2
GS4H, GS4EH,
PPTEH or
STH2
Packaging*
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
1000
25000
1000
10000
1000
5000
250
2500
100
2000
Most commonly used parts appear in BOLD.
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Bulk Package Quantity. Most commonly used parts appear in BOLD.
19
HALAR▲ and TEFZEL„ Cable Ties
HALAR cable ties meet NEC recommendations for bundling qualified cable
without conduit in plenum spaces. HALAR cable ties have a low smoke
density rating and excellent flammability rating (U.L. 94V-0). Other
applications include nuclear plants, chemical environments,
telecommunications equipment, aerospace, high and low temperature
environments. HALAR cable ties have distinctive maroon color.
PAN-TY ® HALAR
Fluoropolymer
Cable Ties for
Plenum Wiring
Part Number†
PLT1M-C702
PLT2S-C702
PLT3S-C702
Length
Width Thickness
Cross
A
B
C
Section In. (mm) In. (mm) In. (mm)
Min.
4.0
.098
.043
(102)
(2.5)
(1.1)
7.40
.190
.055
(188)
(4.8)
(1.4)
Std.
11.60
.190
.059
(295)
(4.8)
(1.5)
Head
Height
D
In. (mm)
.186
(4.7)
.240
(6.1)
.240
(6.1)
Head
Width
E
In. (mm)
.188
(4.8)
.320
(8.1)
.320
(8.1)
Max.
Bundle
Dia.
In. (mm)
.87
(22)
1.88
(48)
3.00
(76)
Min. Loop
Tensile
Strength
Lbs. (N)
18
(80)
Recommended
PANDUIT ®
Installation Tool
Part No.
GS2B, PPTS
or STS2
50
(222)
GS2B, GS4H,
PPTS, STS2
or STH2
Packaging*
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
1000
Bulk
Pkg.
Qty.
1000
Bulk
Ctn.
Qty.
25000
100
1000
1000
10000
100
1000
1000
5000
Most commonly used parts appear in BOLD
PAN-TY ® TEFZEL
Fluoroploymer
Cable Ties
PLT1M-C76
PLT2I-C76
Min.
Int.
PLT2S-C76
PLT3S-C76
Std.
PLT4S-C76
PLT3H-L76
PLT4H-L76
Hvy.
4.0
(102)
8.0
(203)
7.40
(188)
11.60
(295)
14.60
(371)
11.50
(292)
14.60
(371)
TEFZEL cable ties are ideal for applications requiring resistance to
environmental stresses such as chemical attack, gamma radiation,
ultraviolet radiation and extreme temperatures. In addition, TEFZEL has a
U.L. Flammability rating of UL94V-0. TEFZEL ties have distinctive aqua
blue color. TEFZEL cable tie mounts appear on Page 84 .
.098
(2.5)
.135
(3.4)
.190
(4.8)
.190
(4.8)
.190
(4.8)
.300
(7.6)
.300
(7.6)
.043
(1.1)
.051
(1.3)
.055
(1.4)
.059
(1.5)
.059
(1.5)
.075
(1.9)
.075
(1.9)
.186
(4.7)
.180
(4.6)
.240
(6.1)
.240
(6.1)
.240
(6.1)
.360
(9.1)
.360
(9.1)
.188
(4.8)
.240
(6.1)
.320
(8.1)
.320
(8.1)
.320
(8.1)
.480
(12.2)
.480
(12.2)
.87
(22)
2.00
(51)
1.88
(48)
3.00
76)
4.00
(102)
3.07
(78)
4.00
(102)
18
(80)
25
(111)
GS2B, PPTS
or STS2
50
(222)
GS2B, GS4H
PPTS, STS2
or STH2
120
(533)
GS4H, GS4EH
PPTEH or
STH2
100
1000
1000
25000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
5000
100
1000
1000
5000
50
500
250
2500
50
500
250
2500
Most commonly used parts appear in BOLD
PAN-TY ®
Marker Ties for
Intrinsically
Safe Wiring
Part Number†
PLF1MA-IB-C6
PLM2S-IB-C6
20
Cross
Section
Min.
Std.
Intrinsically safe wiring is defined as “wiring which is incapable of
releasingsufficient electrical or thermal energy to cause ignition of the
specificsurrounding atmosphere.” The special blue color, which meets
IECstandards, indicates that the marked circuits are intrinsically safe.
Length
Width Thickness
A
B
C
In. (mm) In. (mm) In. (mm)
5.1
.098
.045
(130)
(2.5)
(1.1)
7.4
.185
.052
(188)
(4.7)
(1.3)
Marker
Area
In. (mm)
.812 x 1.12
(20.6 x 28)
.520 x 1.09
(13.2 x 27.7)
Max.
Bundle
Dia.
In. (mm)
.87
(22)
1.75
(45)
Min. Loop
Tensile
Strength
Lbs. (N)
18
(80)
50
(222)
Recommended
PANDUIT ®
Installation Tool
Part No.
GS2B, PPTS
or STS2
GS2B, GS4H,
PPTS, STS2
or STH2
Packaging*
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
1000
Bulk
Pkg.
Qty.
—
Bulk
Ctn.
Qty.
—
100
1000
—
—
▲HALAR is the Registered Trademark for Ausimont, Inc., fluoropolymer. „TEFZEL is the Registered Trademark of E. I. DuPont Co., fluoropolymer.
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to 41
Fluorescent Cable Ties
Designed for packaging and color-coding applications. Ties are offered in
four “hot” colors: Orange, Yellow, Green and Pink.
PAN-TY ®
Nylon 6.6
Fluorescent Ties
Part Number†
Color
Head
Length Width Thickness Height
Cross
A
B
C
D
Section In. (mm) In. (mm) In. (mm) In. (mm)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
PLT1M-C53
Orange
100
1000
1000 50000
PLT1M-C54
Yellow
100
1000
1000 50000
PLT1M-C55
Green
100
1000
1000 50000
PLT1M-C59
Pink
100
1000
1000 50000
PLT2I-C53
Orange
100
1000
1000 25000
PLT2I-C54
Yellow
100
1000
1000 25000
PLT2I-C54
Green
100
1000
1000 25000
PLT2I-C59
Pink
100
1000
1000 25000
PLT2S-C53
Orange
100
1000
1000 10000
PLT2S-C54
Yellow
100
1000
1000 10000
PLT2S-C55
Green
100
1000
1000 10000
PLT2S-C59
Pink
100
1000
1000 10000
PLT3S-C53
Orange
100
1000
1000 10000
PLT3S-C54
Yellow
100
1000
1000 10000
PLT3S-C55
Green
100
1000
1000 10000
PLT3S-C59
Pink
100
1000
1000 10000
Min.
Int.
3.9
(99)
8.0
(203)
7.4
(188)
.10
(2.5)
.14
(3.6)
.190
(4.8)
.098
(2.5)
.045
(1.2)
.052
(1.3)
.154
(3.9)
.180
(4.6)
.220
(5.6)
.180
(4.6)
.240
(6.1)
.316
(8.0)
.87
(22)
2.00
(51)
1.88
(48)
18
(80)
40
(178)
.190
(4.8)
.052
(1.3)
.220
(5.6)
.337
(8.6)
3.00
(76)
STS
GS2B, PPTS
50
(222)
Std.
11.5
(292)
STS,
GS2B, PPTS
50
(222)
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for High Density Polyethylene is Bulk Package Quantity.
Part Number shown for Fluorescent parts is Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to 41 .
GS2B, GS4H,
PPTS, STS2
or STH2
21
DOME-TOP ® BARB-TY ® Cable Ties
DOME-TOP ® BARB-TY ® Cable Tie Features/Benefits
1. STAINLESS STEEL BARB
2. LOW THREADING FORCE
3. HIGH TENSILE STRENGTH
• Made of 316 corrosion
resistant stainless steel
• Provides consistent
performance and reliability for
users who prefer a cable tie
with a metal barb
• Infinitely adjustable for tight
bundles through its entire
bundle range
• Reduces installer fatigue
• Increases productivity
• Exceeds industry and military
(MIL-S-23190E) standards
4. ANTI-SLIP STRAP BODY
5. FINGER TIP GRIP
6. ANTI-SPRING BACK TIP
• Ribbed and stippled strap
bodyprevents axial and
lateralmovement
• Exclusively designed finger
grip is available on all sizes of
DOME-TOP BARB-TY Cable
Ties to assure positive grip
during threading of the tie
• Tip engages when inserted into
head
7. CURVED TIP
8. MATERIAL/SIZE AVAILABILITY
9. TEMPERATURE RATINGS
• Orients tip toward head to
speed installation; lowers
installed cost
• Faster initial threading
• Easier to pick up from flat
surfaces
• Available in lengths from 4.0"
to 30.7" to meet a variety of
applications
• Several materials available
for special environments:
Natural 6.6 nylon, weather
resistant black 6.6 nylon,
heat stabilized 6.6 nylon and
11 different colors
22
• Available in four loop
tensile strengths from 18
lbs. (80N) to 120 lbs.
(534N) to provide a wide
selection
Natural 6.6 Nylon
Heat Stabilized
and Weather
6.6Nylon
Resistant 6.6
Nylon
Max.
Min.
185°F (85°C)
-40°F (-40°C)
221°F (105°C)
-40°F (-40°C)
DOME-TOP ® BARB-TY ® Cable Ties
DOME-TOP ® BARB-TY ®
Nylon 6.6 Locking
Cable Ties
Side View
• Available in Miniature, Intermediate, Standard and Light
Heavy Cross Section
• Bundle diameters up to 9.00" (229mm)
• Available in natural, weather resistant and heat stabilized
nylon and 11 different colors
• Tool or hand installed
Front View
MINIATURE CROSS SECTION
Part Number†
Length
Width
A
B
In. (mm) In. (mm)
BT1M-C
4.0
(102)
BT1.5M-C
6.3
(160)
BT2M-C
7.9
(201)
BT3M-C
11.1
(282)
BT4M-C
14.2
(361)
Thickness
C
In. (mm)
Head
Height
D
In. (mm)
.036
(0.9)
.095
(2.4)
.046
(1.2)
.156
(4.0)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
.172
(4.4)
.182
(4.6)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
.90
(23)
100
1000
1000
50000
1.50
(38)
100
1000
1000
25000
100
1000
1000
25000
3.00
(76)
100
1000
1000
10000
4.00
(102)
100
1000
1000
10000
1.50
(38)
100
1000
1000
25000
100
1000
1000
25000
100
1000
1000
10000
4.00
(102)
100
1000
1000
10000
2.00
(51)
100
1000
1000
10000
100
1000
1000
10000
4.00
(102)
100
1000
1000
5000
2.00
(51)
18
(80)
GS2B, PPTS
or STS2
INTERMEDIATE CROSS SECTION
BT1.5I-C
6.1
(155)
BT2I-C
8.0
(203)
BT3I-C
BT4I-C
11.1
(282)
.041
(1.0)
.141
(3.6)
.185
(4.7)
.248
(6.3)
.049
(1.2)
14.3
(363)
2.00
(51)
3.00
(76)
40
(178)
GS2B, PPTS
or STS2
STANDARD CROSS SECTION
BT2S-C
8.0
(203)
BT3S-C
12.0
(305)
BT4S-C
.045
(1.2)
.185
(4.7)
15.1
(384)
.052
(1.3)
.220
(5.6)
.320
(8.1)
3.00
(76)
50
(222)
GS2B, GS4H,
PPTS, STS2
or STH2
LIGHT HEAVY CROlSS SECTION
(Straight Tip)
BT2LH-L
8.7
(221)
2.00
(51)
50
500
250
2500
BT3LH-L
11.8
(300)
3.00
(76)
50
500
250
2500
BT4LH-L
14.9
(378)
4.00
(102)
50
500
250
2500
BT5LH-L
18.1
(460)
50
500
100
2000
50
500
100
2000
.275
(7.0)
.065
(1.7)
.320
(8.1)
.520
(13.2)
5.00
(127)
6.00
(152)
120
(534)
GS4H, GS4EH,
PPTEH, STH2,
or ST2EH
BT6LH-L
21.2
(538)
BT7LH-L
24.4
(620)
7.00
(178)
50
500
100
2000
BT8LH-L
27.5
(699)
8.00
(203)
50
500
100
1000
BT9LH-L
30.7
(780)
9.00
(229)
50
500
100
1000
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to 41 .
Most commonly used pa rts appear in BOLD.
For colors and other materials, See Page 36 to 39.
23
Weather Resistant BARB-TY ® Cable Ties
DOME-TOP ® BARB-TY ®
Weather Resistant Nylon
Locking Cable Ties
Side View
• Available in Miniature, Intermediate, Standard and Light Heavy
Cross Section
• Bundle diameters up to 9.00" (229mm)
• Weather resistant nylon has greater resistance to ultra violet light
which damages natural nylon
• Tool or hand installed
Front View
MINIATURE CROSS SECTION
Part Number†
BT1M-C0
BT1.5M-C0
BT2M-C0
BT3M-C0
BT4M-C0
Length
Width
A
B
In. (mm) In. (mm)
4.0
(102)
6.3
(160)
7.9
.095
(201)
(2.4)
11.1
(282)
14.2
(361)
Thickness
C
In. (mm)
.036
(0.9)
.046
(1.2)
Head
Height
D
In. (mm)
.156
(4.0)
Head
Width
E
In. (mm)
.172
(4.4)
.182
(4.6)
Max.
Bundle
Dia.
In. (mm)
.90
(23)
1.50
(38)
2.00
(51)
3.00
(76)
4.00
(102)
Min. Loop
Tensile
Strength
Lbs. (N)
18
(80)
Recommended
PANDUIT ®
Installation Tool
Part No.
GS2B, PPTS
or STS2
Packaging*
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
1000
Bulk
Pkg.
Qty.
1000
Bulk
Ctn.
Qty.
50000
100
1000
1000
25000
100
1000
1000
25000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
25000
100
1000
1000
25000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
5000
50
500
250
2500
50
500
250
2500
50
500
250
2500
50
500
100
2000
50
500
100
2000
50
500
100
2000
50
500
100
1000
50
500
100
1000
INTERMEDIATE CROSS SECTION
BT1.5I-C0
BT2I-C0
BT3I-C0
BT4I-C0
6.1
(155)
8.0
(203)
11.1
(282)
14.3
(363)
.041
(1.0)
.141
(3.6)
.185
(4.7)
.248
(6.3)
.049
(1.2)
1.50
(38)
2.00
(51)
3.00
(76)
4.00
(102)
40
(178)
GS2B, PPTS
or STS2
STANDARD CROSS SECTION
BT2S-C0
BT3S-C0
BT4S-C0
8.0
(203)
12.0
(305)
15.1
(384)
.045
(1.2)
.185
(4.7)
.052
(1.3)
.220
(5.6)
.320
(8.1)
2.00
(51)
3.00
(76)
4.00
(102)
50
(222)
GS2B, GS4H,
PPTS, STS2
or STH2
LIGHT HEAVY CROSS SECTION
(Straight Tip)
BT2LH-L0
BT3LH-L0
BT4LH-L0
BT5LH-L0
BT6LH-L0
BT7LH-L0
BT8LH-L0
BT9LH-L0
24
8.7
(221)
11.8
(300)
14.9
(378)
18.1
(460)
21.2
(538)
24.4
(620)
27.5
(699)
30.7
(780)
.275
(7.0)
.065
(1.7)
.320
(8.1)
.520
(13.2)
2.00
(51)
3.00
(76)
4.00
(102)
5.00
(127)
6.00
(152)
7.00
(178)
8.00
(203)
9.00
(229)
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to 41 .
120
(534)
GS4H, GS4EH,
PPTEH, STH2,
or ST2EH
Most commonly used pa rts appear in BOLD.
For colors and other materials, See Page 36 to 39.
BARB-TY ® Heat Stabilized Cable Ties
DOME-TOP ® BARB-TY ®
Nylon 6.6 Heat Stabilized —
Natural (39)
• Available in Miniature, Intermediate, Standard and Light
Heavy Cross Section
• Bundle diameters up to 4.00" (102mm)
• Temperature rating: –40°F (–40°C) to 221°F (105°C)
• Tool or hand installed
Front View
Side View
MINIATURE CROSS SECTION
Part Number†
BT1M-C39
Length
Width
A
B
In. (mm) In. (mm)
4.0
(102)
Thickness
C
In. (mm)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
.036
(0.9)
.156
(4.0)
.172
(4.4)
.90
(23)
18
(80)
.041
(1.0)
.185
(4.7)
.248
(6.3)
1.50
(38)
.045
(1.2)
.220
(5.6)
.320
(8.1)
2.00
(51)
.095
(2.4)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GS2B, PPTS
or STS2
100
1000
1000
50000
40
(178)
GS2B, PPTS
or STS2
100
1000
1000
25000
50
(222)
GS2B, GS4H,
PPTS, STS2
or STH2
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
5000
50
500
250
2500
INTERMEDIATE CROSS SECTION
BT1.5I-C39
6.1
(155)
.141
(3.6)
STANDARD CROSS SECTION
BT2S-C39
8.0
(203)
BT3S-C39
12.0
(305)
BT4S-C39
.185
(4.7)
3.00
(76)
.052
(1.3)
15.1
(384)
4.00
(102)
LIGHT HEAVY CROSS SECTION
(Straight Tip)
BT4LH-L39
14.9
(378)
.275
(7.0)
.065
(1.7)
.320
(8.1)
.520
(13.2)
4.00
(102)
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to Page 41.
120
(534)
GS4H, GS4EH,
PPTEH, STH2,
or ST2EH
For colors and other materials,
See Page 36 to 39.
25
DOME-TOP ® BARB-TY ® Clamp Ties
• Used to secure a bundle of wires to another surface such as
a control panel, wall or ceiling
• The design allows for bundling before or after screwing
clamp in place
• Available in Standard and Light Heavy Cross Section
• Bundle diameters up to 4.00" (102mm)
• Available in natural, weather resistant and heat
stabilized black nylon
DOME-TOP ® BARB-TY ®
Nylon 6.6 Clamp Ties
Side View
Front View
Side View
Front View
STANDARD CROSS SECTION
Part Number†
BC2S-S10-C
BC3S-S10-C
BC4S-S10-C
Length Width Thickness
A
B
C
In. (mm) In. (mm) In. (mm)
8.5
.185
.052
(216)
(4.7)
(1.3)
12.5
(318)
15.6
(396)
Boss
Height
D
In. (mm)
.160
(4.1)
Boss
Width
E
In. (mm)
.400
(10.2)
Hole
Dia.
F
In.(mm)
.206
(5.2)
Screw
Size
#10
(M5)
Max.
Bundle
Dia.
In. (mm)
2.00
(51)
3.00
(76)
4.00
(102)
Min. Loop Recommended
PANDUIT ®
Tensile
Strength Installation Tool
Part No.
Lbs. (N)
50
GS2B, GS4H,
(222)
PPTS, STS2
or STH2
Packaging*
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
1000
Bulk Bulk
Pkg. Ctn.
Qty. Qty.
1000 10000
100
1000
1000 10000
100
1000
1000
5000
50
500
250
2500
50
500
250
2500
50
500
250
2500
100
1000 1000 10000
100
1000 1000 10000
100
1000 1000 5000
50
500
250
2500
50
500
250
2500
50
500
250
2500
LIGHT HEAVY CROSS SECTION (Straight Tip)
BC2LH-S25-L
BC3LH-S25-L
BC4LH-S25-L
9.3
(236)
12.4
(315)
15.5
(394)
.275
(7.0)
.065
(1.7)
.265
(6.7)
.520
(13.2)
.260
(6.6)
1/4
(M8)
2.00
(51)
3.00
(76)
4.00
(102)
120
(534)
GS4H, GS4EH,
PPTEH, STH2
or ST2EH
BARB-TY ® Weather
Resistant
STANDARD CROSS SECTION
BC2S-S10-C0
BC3S-S10-C0
BC4S-S10-C0
8.5
(216)
12.5
(318)
15.6
(396)
.185
(4.7)
.052
(1.3)
.160
(4.1)
.400
(10.2)
.206
(5.2)
#10
(M5)
2.00
(51)
3.00
(76)
4.00
(102)
50
(222)
GS2B, GS4H,
PPTS, STS2
or STH2
LIGHT HEAVY CROSS SECTION (Straight Tip)
BC2LH-S25-L0
BC3LH-S25-L0
BC4LH-S25-L0
26
9.3
(236)
12.4
(315)
15.5
(394)
.275
(7.0)
.065
(1.7)
.265
(6.7)
.520
(13.2)
.260
(6.6)
1/4
(M8)
2.00
(51)
3.00
(76)
4.00
(102)
120
(534)
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. For Bulk Pack Part Numbers, See Page 40 to Page 41.
GS4H, GS4EH,
PPTEH, STH2
or ST2EH
For colors and other materials,
See Page 36 to 39.
SUPERFLEX ™ Nylon 6.6 Cable Ties
SUPERFLEX ™
Nylon 6.6
Cable Ties
Lightweight ties are super flexible to conform to bundle. Unique design provides
high strength, increased impact resistance and dimensional stability for
improved clamping.
Featuring the world’s
longest one-piece
nylon cable tie—58.50"
Part Number†
** SLT8LH-L
** SLT10LH-L
Length
Width Thickness
Cross
A
B
C
Section In. (mm) In. (mm) In. (mm)
Lt.
Hvy.
28.00
(711)
SLT14H-L
Hvy.
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
34.75
(882)
10.25
(280)
.055
(1.4)
46.00
(1168)
.300
(7.6)
.500
(12.7)
.33
(8.3)
52.25
(1327)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
120
(534)
12.25
(311)
14.25
(362)
16.35
(413)
58.50
(1486)
SLT18H-L
Max.
Bundle
Dia.
In. (mm)
8.00
(203)
.30
(7.6)
40.25
(1022)
SLT12H-L
SLT16H-L
**
GS4H or
STHV
175
(778)
18.25
(464)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
50
1000
—
—
50
1000
—
—
50
1000
—
—
50
1000
—
—
50
1000
—
—
50
1000
—
—
**Also available in weather resistant 6.6 nylon. Add suffix -0, i.e. SLT8LH-L0 and SLT10LH-L0. Most commonly used parts appear in BOLD.
IN-LINE
Nylon 6.6
Cable Ties
Part Number†
IN-LINE ties have serrations on the outside which allow the strap body to be
inserted parallel to the strap head. Tie conforms to large bundles better than
conventional ties. Available in weather resistant 6.6 nylon (-0). May be installed
with PANDUIT GS4H cable tie installation tools.
Length
Width Thickness
Cross
A
B
C
Section In. (mm) In. (mm) In. (mm)
IT940-C0
6.8
(172)
IT965-C0
10.1
(258)
IT9100-C0
IT9115-C0
Hvy.
14.1
(359)
15.4
(391)
IT9150-C0
20.4
(518)
IT9250-C0
33.0
(838)
.065
(1.65)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
.250
(6.33)
.350
(9)
.556
(14.1)
.075
(1.9)
.270
(6.86)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
1.57
(40)
—
—
100
1000
2.58
(65)
—
—
100
1000
—
—
100
1000
—
—
100
1000
5.91
(150)
—
—
100
1000
9.84
(250)
—
—
100
1000
3.94
(100)
4.46
(113)
124
(550)
GS4H
Most commonly used parts appear in BOLD.
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for SLT ties is Standard Package Quantity and Part Number shown for In-Line ties is Bulk Package quantity.
27
IN-LINE Nylon 6.6 Cable Ties
IN-LINE Nylon 6.6 Cable Ties
For Installing Foam Padding On
Playground Applications
NOTE: IN-LINE Clamp
Ties are installed with the
teeth on the inside and
against the foam.
Part Number†
Description
• Features
• No protruding head to cause injury since head is inverted
• No protruding tie tip to cause injury since the tip is trapped between the
tie and foam
• Tie will not slip on the foam since the head will indent the foam to remain
captive
• Wide tie body, .350" (9mm) for improved aesthetics
• Cannot overtension tie causing bulges in the foam
• Easy Installation: No installation tools required
Flexible and easy to handle
No need to heat weld the ends closed
No cutoff scrap pieces to handle or pick up
• Strong: 124 lb. loop tensile strength
• Locking wedge is protected from unlocking and from ultraviolet light
exposure
• Available in 13 ultraviolet colors that will last 2 to 3 times longer than
normal pigmented colors
• Color coordinated to match foam
Head
Length
Width Thickness Height
Cross
A
B
C
D
Section In. (mm) In. (mm) In. (mm) In. (mm)
Head
Width
E
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.*
Bulk
Ctn.
Qty.*
1000
IT9100-CUV2
U.V. Red
—
—
100
IT9100-CUV4
U.V. Yellow
—
—
100
1000
U.V. Butterscotch
—
—
100
1000
IT9100-CUV4A
IT9100-CUV5A
U.V. Green
—
—
100
1000
IT9100-CUV5B
U.V. Hunter Green
—
—
100
1000
—
—
100
1000
—
—
100
1000
IT9100-CUV6
U.V. Dark Blue
IT9100-CUV6A
U.V. Light Blue
IT9100-CUV6B
U.V. Cobalt Blue
—
—
100
1000
IT9100-CUV7A
U.V. Purple
—
—
100
1000
IT9100-CUV8
U.V. Silver
—
—
100
1000
IT9100-CUV11
U.V. Teal
—
—
100
1000
IT9100-CUV16B
U.V. Pink
—
—
100
1000
IT9100-C0
U.V. Black
—
—
100
1000
Part Number†
Description
Hvy.
14.1
(359)
.350
(9)
.065
(1.65)
.250
(6.33)
Head
Length
Width Thickness Height
Cross
A
B
C
D
Section In. (mm) In. (mm) In. (mm) In. (mm)
.556
(14.1)
Head
Width
E
In. (mm)
3.94
(100)
Max.
Bundle
Dia.
In. (mm)
124
(550)
Min. Loop
Tensile
Strength
Lbs. (N)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.*
Bulk
Ctn.
Qty.*
1000
IT9115-CUV2
U.V. Red
—
—
100
IT9115-CUV4
U.V. Yellow
—
—
100
1000
U.V. Butterscotch
—
—
100
1000
IT9115-CUV4A
IT9115-CUV5A
U.V. Green
—
—
100
1000
IT9115-CUV5B
U.V. Hunter Green
—
—
100
1000
—
—
100
1000
—
—
100
1000
IT9115-CUV6
U.V. Dark Blue
IT9115-CUV6A
U.V. Light Blue
IT9115-CUV6B
U.V. Cobalt Blue
—
—
100
1000
IT9115-CUV7A
U.V. Purple
—
—
100
1000
IT9115-CUV8
U.V. Silver
—
—
100
1000
IT9115-CUV11
U.V. Teal
—
—
100
1000
IT9115-CUV16B
U.V. Pink
—
—
100
1000
IT9115-C0
U.V. Black
—
—
100
1000
28
Hvy.
15.4
(391)
.350
(9)
.075
(1.9)
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for In-Line ties is Bulk Package Quantity.
.250
(6.33)
.556
(14.1)
4.46
(113)
124
(550)
For colors and other materials,
See Page 36 to 39.
Specialty Ties
TAK-TY ™ Cable Ties
HLC, HLT, HLM & HLS Series
These handy hook & loop, woven material ties are very easy to release and
reuse, making them ideal for applications where changes are anticipated or
continuous access is required. These products are also great for applications
where over-tightening is a concern and they will not pinch or abrade wires.
HLC Series
Length Width
A
B
Part Number† In. (mm) In. (mm)
Thickness
In. (mm)
Head
Width
C
In. (mm)
Min.
Bundle
Dia.
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength**
Lbs. (N)
Packaging***
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
10
100
—
—
10
100
—
—
Cinching Ties - Cinch ring provides extra strength and bundle tightness
HLC3S-X0
HLC5S-X0
12.0
(305)
.75
(19)
.10
(2.5)
18.0
(457)
.75
(19)
.10
(2.5)
1.10
(27.9)
2.0
(51)
3.0
(76)
3.0
(76)
5.0
(127)
50
(222)
Most commonly used parts appear in BOLD.
HLT Series
Length Width
A
B
Part Number† In. (mm) In. (mm)
Thickness
In. (mm)
Head
Width
C
In. (mm)
Min.
Bundle
Dia.
In. (mm)
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength**
Lbs. (N)
Packaging***
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
10
100
—
—
10
100
—
—
HLM-15RO
HLS-15RO
HLS-75RO
Loop Ties - Slot allows for pre-wrapping of bundles
HLT2I-X0
HLT3I-X0
8.0
(203)
.50
(12.7)
.10
(2.5)
12.0
(305)
.50
(12.7)
.10
(2.5)
1.00
(25.4)
.25
(6)
1.9
(48)
.25
(6)
3.2
(81)
40
(178)
Most commonly used parts appear in BOLD.
HLM & HLS Series
Color Chart For
HLT Ties, HLS Ties,
HLM/HLS-15R Rolls &
HLS-75R Rolls
Strip Ties - Rolls Perforated in Convenient 6", 12" and 18" strips
HLS1.5S-X0
6.0
(152)
.75
(19)
.10
(2.5)
—
.25
(6)
1.5
(38)
HLS3S-X0
12.0
(305)
.75
(19)
.10
(2.5)
—
.25
(6)
3.2
(81)
18.0
(457)
.75
(19)
.10
(2.5)
—
.25
(6)
5.0
(127)
HLS5S-X0
50
(222)
10
100
—
—
10
100
—
—
10
100
—
—
Color
Part No.
Suffix
Black
-0
Red
-2
Orange
-3
Yellow
-4
Green
-5
Blue
-6
Violet
-7
15' & 75' Rolls - Can be cut to desired length, eliminating waste
HLM-15RO
180.0
(4572)
.33
(8.4)
.10
(2.5)
—
.25
(6)
Various
18
(80)
1
10
—
—
HLS-15RO
180.0
(4572)
.75
(19)
.10
(2.5)
—
.25
(6)
Various
50
(222)
1
10
—
—
900.0
(22,860)
.75
(19)
.10
(2.5)
—
.25
(6)
Various
50
(222)
1
HLS-75RO
10
—
—
Gray
-8
White
-10
Tan
-18
Most commonly used parts appear in BOLD.
** Minimum 2" overlap required to achieve loop tensile rating.
***Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity.
29
Specialty Ties
Base portion pushes onto a threaded stud and the tie portion wraps around
the bundle. The wire bundle is centered over the stud. Releasable and
convoluted tubing styles ( See Page 11 ) are also available. Contact factory.
PANDUIT ®
Specialty Ties
Stud Mounted
Heat Stabilized
Nylon 6.6
Cable Ties
Type PLST-SC
Part Number†
Cross
Section
Length
Width
A
B
In. (mm) In. (mm)
Thickness
C
In. (mm)
Type PLST-SD
Base
Height
D
In. (mm)
Recommended
Stud Size
In. (mm)
Type PLST-SE
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
500
5000
500
5000
500
5000
1000
10000
1000
5000
1000
10000
1000
5000
Locking Style
5.74
(146)
PLST30SC-D30
PLST40SC-D30
Std.
6.94
(176)
1.18
(30)
.19
(4.8)
.050
(1.3)
.41
(10.5)
10-24
(5)
8.14
(207)
PLST50SC-D30
Ladder Style
Stud Mounted
Cable Tie
1.57
(40)
50
(222)
GS2B, GS4H,
PPTS, STS2
or STH2
1.97
(50)
The ties can be removed from the stud by turning counterclockwise.
Adjustable and releasable.
Heat Stabilized
Nylon 6.6
5.2
(132)
PRST30S-S9-M30
PRST50S-S9-M30
PRST30S-S14-M30
PRST50S-S14-M30
30
Std.
7.5
(191)
5.2
(132)
10-24 x .375
(5 x 9)
.38
(9.7)
.050
(1.3)
.59
(15)
7.5
(191)
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Bulk Package Quantity.
10-24 x .50
(5 x 12 or 5 x 14)
1.18
(30)
1.97
(50)
1.18
(30)
1.97
(50)
35
(156)
Hand Installed
Only
Specialty Ties
Secure any two bundles up to total diameter of 3.8" (97mm); a fast and
economical method for securing a harness and mounting it to another harness,
cabinet or other convenient mounting point.
PANDUIT ®
Specialty Ties
Double Loop
Nylon 6.6
Cable Ties
• PAN-TY ®, one-piece design
• Second loop can be installed with
PANDUIT cable tie installation tools
• Bent tip provides faster orientation
Part Number†
Cross
Section
Head
Height
D
In. (mm)
Thickness
C
In. (mm)
Max. Combined
Bundle Dia.
In. (mm)
7.6
(193)
PLB2S-C
PLB3S-C
Length
Width
A
B
In. (mm) In. (mm)
Std.
Recommended
PANDUIT ®
Installation
Tool Part No.
1.8
(46)
11.8
(300)
.19
(4.8)
.052
(1.3)
2.8
(71)
.200
(5.1)
14.8
(376)
PLB4S-C
Min. Loop
Tensile
Strength
Lbs. (N)
GS2B, GS4H,
PPTS, STS2
or STH2
50
(222)
3.8
(97)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
5000
Most commonly used parts appear in BOLD.
Double Hose Clamp
Weather Resistant
Nylon 6.6
Part Number†
DHC1.12x1.75L0
Length Width
A
B
In. (mm) In. (mm)
11.0
(279)
1. Wrap clamp around hose.
.28
(7.1)
The Double Hose Clamp can be used on gasoline, hydraulic or pneumatic
hoses. It holds each hose individually to prevent abrasion and holds them
together to prevent twisting.
Loop Diameters
Thickness
C
In. (mm)
Head
Height
D
In. (mm)
Head
Width
E
In. (mm)
Fixed
Loop
In. (mm)
Adjustable
Loop
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
.050
(1.3)
.31
(7.9)
.44
(11.2)
1.12
(28)
1.0 to 1.75
(25 to 44)
100
(445)
2. Position second hose in clamp.
3. Loop tail around second hose
and thread tail through both
spacer heads.
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for PLB and SSB ties is Natural Nylon in Standard Package Quantity.
Part Number for DHC is weather resistant black nylon in Standard Package Quantity.
Recommended
PANDUIT ®
Std.
Installation
Pkg.
Tool Part No.
Qty.
GS4H,
STH2 or ST2EH
50
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
500
500
2500
4. Tension and cut off with Panduit
tool.
For colors and other materials,
See Page 36 to 39.
31
Specialty Ties
PANDUIT ®
Specialty Ties
Umbrella Winged
Push Mount
Cable Ties
The tie’s anchor barb clicks into a clearance hole in a light gauge metal or
plastic panel, no screws or other fasteners required. The umbrella shaped
disc stabilizes the anchor barb and insures a tight, rattle-free fit. In
addition, the umbrella disc provides a dust-tight and semi-liquid tight seal
against the panel surface. The material is heat stabilized black resin.
Mounting Hole
Diameter
Part Number†
PLUP30S-D30
PLUP40S-D30
PLUP50S-D30
A
B
Cross
Length
Width
Section In. (mm) In. (mm)
5.79
(147)
6.97
0.19
Std.
(177)
(4.83)
8.15
(207)
Panel Thickness
Range
Min.
In. (mm)
Max.
In. (mm)
Min.
In. (mm)
Max.
In. (mm)
0.24
(6.2)
0.28
(7.2)
0.03
(0.7)
0.05
(1.2)
Maximum
Bundle
Diameter
In. (mm)
1.18
(30)
1.57
(40)
1.97
(50)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
50
(222)
PPTS, GS2B,
GS2BL, STS2,
GS4H
Packaging*
Bulk
Pkg.
Qty.
500
Bulk
Ctn.
Qty.
5000
500
5000
500
5000
Unique design of tie allows it to secure a bundle directly to a chassis or
panel without the need for separate fasteners or mounting devices, thus
reducing costs.
STA-STRAP ®
Chassis/Panel
Mount Tie
Weather resistant heat
stabilized nylon 6.6
Insert tip end of STA-STRAP cable
tie through the correct size pre-drilled
hole in the panel.
Part Number†
Pull tip end until STA-STRAP cable
tie is snug on bundle. Tension and cut
off excess portion with Panduit cable
tie installation tool
Wrap cable tie around the bundle and
insert the tip end back through the
hole and head of the cable tie.
D
Recommended
A
B
C
Head
Panel Hole
Length
Width Thickness Height
Dia.
In. (mm) In. (mm) In. (mm) In. (mm)
In. (mm)
Maximum
Bundle
Diameter
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
50
2500
250
2500
50
2500
250
2500
50
2500
250
2500
50
2500
250
2500
—
—
250
2500
—
—
250
2500
Without Pilot — Heavy Cross Section
SSPM2.5H-L300
SSPM4H-L300
10.19
(259)
14.8
(376)
.30
(7.6)
.062
(1.6)
.248
(6.3)
.316 to .820
(8.0 to 21)
2.76
(70)
4.00
(102)
120
(534)
GS4H, GS4EH,
PPTEH, STH2,
or ST2EH
.062
(1.6)
.248
(6.3)
.440 to .820
(11.2 to 21)
2.76
(70)
4.00
(102)
120
(534)
GS4H, GS4EH,
PPTEH, STH2,
or ST2EH
.316 to .820
(8.0 to 21)
.440 to .820
(11.2 to 21)
2.76
(70)
4.00
(102)
120
(534)
GS4H, GS4EH,
PPTEH, STH2,
or ST2EH
With Pilot — Heavy Cross Section
SSPM2.5HP-L300
SSPM4HP-L300
10.19
(259)
14.8
(376)
.30
(7.6)
With Long Centering Pilot — Heavy Cross Section
SSPM25HLP-TL300
SSPM4HLP-TL300
32
10.1
(257)
14.8
(376)
.30
(7.6)
.30
(7.6)
.062
(1.6)
.062
(1.6)
.248
(6.3)
.248
(6.3)
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Bulk Package Quantity. Most commonly used parts appear in BOLD.
Specialty Ties
PANDUIT ®
Specialty Ties
PAN-POUCH ™
Telephone Cable
Identification Kit
The PAN-POUCH system provides a fast, convenient method of identifying
binder groups on both sides of a splice in PIC cable. It consists of striped
PAN-TY ® Cable Ties in 25 color combinations which match the universally
accepted Even-Count Color Code. In addition, solid color ties are available
for identification of “Super Groups” in cable containing more than 600 pairs.
Cable ties have maximum bundle diameter of .82" (20.8mm). Each 50 pc.
package fits into PAN-POUCH or Pocket Pouch.
Nylon 6.6 Cable Ties
Packaging*
Part
Number
Cable Tie
Color
PLT1M-L6-10
PLT1M-L3-10
PLT1M-L5-10
PLT1M-L1-10
PLT1M-L8-10
Blue
Orange
Green
Brown
Slate
PLT1M-L6-2
PLT1M-L3-2
PLT1M-L5-2
PLT1M-L1-2
PLT1M-L8-2
Blue
Orange
Green
Brown
Slate
PLT1M-L6-0
PLT1M-L3-0
PLT1M-L5-0
PLT1M-L1-0
PLT1M-L8-0
Blue
Orange
Green
Brown
Slate
Packaging*
Color
Stripe
Std. Pkg.
Qty.
Std. Ctn.
Qty.
White
50
50
50
50
50
1000
1000
1000
1000
1000
PLT1M-L6-4
PLT1M-L3-4
PLT1M-L5-4
PLT1M-L1-4
PLT1M-L8-4
Blue
Orange
Green
Brown
Slate
Red
50
50
50
50
50
1000
1000
1000
1000
1000
PLT1M-L6-7
PLT1M-L3-7
PLT1M-L5-7
PLT1M-L1-7
PLT1M-L8-7
Blue
Orange
Green
Brown
Slate•
Black
50
50
50
50
50
1000
1000
1000
1000
1000
PLT1M-L2
PLT1M-L0
PLT1M-L4
PLT1M-L6
PLT1M-L3
PLT1M-L5
PLT1M-L1
PLT1M-L8
Cable ties in other solid colors (sold in 100 pc. packages) See Page 36.
•Not included in filled PAN-POUCH.
Part
Number
Cable Tie
Color
Color
Stripe
Std. Pkg.
Qty.
Std. Ctn.
Qty.
Yellow
50
50
50
50
50
1000
1000
1000
1000
1000
50
50
50
50
50
1000
1000
1000
1000
1000
Red
Black•
Yellow•
50
50
50
1000
1000
1000
Blue•
Orange•
Green•
Brown•
Slate•
50
50
50
50
50
1000
1000
1000
1000
1000
Violet
Pouches
PAN-POUCH is 10 1/2" x 36"
(266mm x 914mm) made of
canvas and folds to 10 1/2" x
6" (266mm x 152mm) for
easy storage. The pouch can
be easily hung from cable by
using snap fasteners.
Pocket Pouch holds
five (50 pc.) packages.
Part Number
Pouch
Material
Packaging*
Std. Pkg.
Qty.
Canvas
1
PPC25x50F
Description
PAN-POUCH filled with 1250 cable
ties. 50 each of all 24 striped ties
plus solid red
PPC25x50
Empty PAN-POUCH
Canvas
1
PP5x50F
Pocket Pouch filled with 250 cable
ties (50 each: Blue, orange, green,
brown and slate all with white stripe).
Vinyl
1
PP5x50-X
Empty Pocket Pouch
Vinyl
10
*Order cable ties by the Number of Pieces Required in Multiples of Packaging Quantities.
33
Specialty Ties
For identifying and coding telephone and fiber optic cable. Replaces costly
and cumbersome lead marking tags. Lightweight and easy-to-install. Can be
used as wrap-around or “flag” marker. Can also be used in underground
identification applications. Custom hot stamping is available. See Page 35.
PANDUIT ®
Specialty Ties
Polyethylene
Cable Marker Strap
Unique design allows strap to be used as:
Part Number†
Color
CM4S-L2
Red
CM4S-L8
Gray
Cross
Section
Std.
Marking
Area
In. (mm,)
Max.
Bundle
Dia.
In. (mm)
Recommended
PANDUIT ®
Installation
Tool Part No.
1.50 x 2.62
(38.1 x 66.5)
4.38
(111)
Hand Installed Only
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
50
500
50
500
WRAP-AROUND
MARKER
(Min. Dia.:1.27")
Weather Resistant
Polypropylene Aerial
Support Tie
Designed to attach coax or telephone cable to the support strand
(1/4" or 5/16") to form the expansion loop and keep equipment and
cables clear of pole hardware. One-piece construction with
integral spacer reduces inventory costs of separate spacer and
bands and installs faster to lower the installed cost. Releasable
and reusable.
With integral 1/2" spacer
Part Number†
Head
Length Width Thickness Width
A
B
C
D
In. (mm) In. (mm) In. (mm) In. (mm)
AST10-5-C100
5.6
(142)
AST15-5-C100
6.9
(175)
AST20-5-C100
8.4
(214)
AST25-5-C100
10.0
(254)
34
Max.
Bundle
Dia.
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Packaging*
Recommended
PANDUIT ®
Std.
Std.
Installation
Pkg. Ctn.
Tool Part No.
Qty.
Qty.
1.0
(25)
.448
(11.4)
.055
(1.4)
“FLAG” MARKER
(Min. Dia.: .25")
1.59
(40.4)
1.5
(38)
2.0
(51)
100
(445)
Hand Installed
Only
2.5
(64)
*Order the Number of Pieces Required in Multiples of Packaging Quantities.
†Part Number shown for Standard Package Quantity. Contact distributor for bulk packaging.
100
—
100
—
100
—
100
—
Custom Hot Stamping
PANDUIT ® Custom Hot Stamping Program
• Economical
• Convenient
• 1/8" (3mm), 3/16" (4.8mm), 5/64" (2mm) & 7/64" (2.8mm)
characters are available
• Standard Type Style: News Gothic
• Character sizes can be mixed from line-to-line
• Alphanumeric and sequential numbering for serialization are
available
• Six digit sequential numbering is available in 3/32" (2.4mm) or
9/64" (3.6mm) characters
• Seven digit sequential numbering is available in 1/8" (3mm)
characters
• Seven colors of hot stamping to make your message stand out
— Black, Blue, Green, Red, Yellow, Orange and White
• Special logos, type styles and sizes can be provided (when
camera ready artwork is supplied)
• Minimum order: 1,000 pieces per part number and message
A custom program to mark nylon cable ties, marker ties and
marker plates to suit your application requirements. . .
CABLE TIE CROSS SECTIONS
MINIATURE
(Locking)
INTERMEDIATE
(Locking)
STANDARD
(Locking and Releasable)
HEAVY AND LIGHT HEAVY
(Locking and Releasable)
EXTRA-HEAVY
(Locking and Releasable)
MARKER TIE CROSS SECTIONS
MINIATURE
(Locking)
STANDARD
(Locking)
NOTE:
Most cable ties and marker ties are also available in colors.
Contact Your Local Panduit Distributor for Details
35
Cable Tie Part Number System, Available Colors & Materials
Part Number System
PLT
2
S
Size
(Approximate
Bundle
Diameter)
Part Description
PANDUIT
Locking
Tie (etc.)
C
—
Screw Hole Size
(Clamp Ties Only)
-S4 = #4 (M2.5)
-S6 = #6 (M3)
-S8 = #8 (M4)
-S10 = #10 (M5)
-S25 = 1/4" (M6)
Cross-Section
SM = Subminiature
M = Miniature
I = Intermediate
S = Standard
H = Heavy
LH = Light-Heavy
EH = Extra-Heavy
Package Size
X = 10
Q = 25
L = 50
C = 100
TL = 250
D = 500
M = 1000
MP = 1000 pc. ctn.
XMR = 2 reels/5000 ea.
DTP = 2 ctns./500 ea.
VMR = 2 reels/2500 ea.
4KR = 2 reels/2000 ea.
5K = strips/5000/pkg.
6K = strips/6000/pkg.
Color
(See Below)
Not all ties are
areavailable in all colors;
refer to pages 37-39.
Military Cross Reference (MIL-S-23190E) to PANDUIT ® Cable Ties
The items listed below are PANDUIT cable ties and tools which meet all requirements of the applicable
Military Standards and are presently listed on the Qualified Products List of products qualified under Military
Specification MIL-S-23190 (MIL-T-81306 for cable tie installation tools).
PAN-TY ®
Part
Number*
Current
Mil. Std.
Part No.*
MS3367-1-*
MS3367-2-*
MS3367-3-*
MS3367-4*
MS3367-4-*
MS3367-5-*
MS3367-6-*
MS3367-7-*
CABLE
TIES
DOME-TOP ®
BARB-TY ®
Part Number*
PLT2S
PLT4S
PLT4H
PLT.7M
PLT1M
PLT1.5I
PLT8LH
PLT3S
PAN-TY ®
Part
Number*
Current
Mil. Std.
Part No.*
BT2S
BT4S
BT4LH
—
BT1M
BT1.5I
BT8LH
BT3S
MARKER
TIES
TOOLS
*Color Code
MS3368-1-*B
MS3368-2-*B
MS3368-1-*A
MS3368-2-*A
MS3368-3-*C
MS3368-4-*C
MS3368-5-*C
—
—
PLM2S
PLM4S
PL2M2S
PL3M2S
PLM1M
MS90387-1
MS90387-1
MS90387-2
GS2B
GS2BL
GS4H
Color and Material of PANDUIT Cable Ties
The following provides the color number for PANDUIT cable tie part numbers and U.S. military standard part
numbers. Applies to cable ties in certain package sizes only. See Color and Availability chart on next page.
*
MATERIAL
NYLON POLYPRO12
PYLENE TEFZELn HALAR▲
6.6 NYLON
†
Nat.
†
Black Black
Heat
TeleHeat Heat
Flame Flame Stab
Black Black Green
Black
†
†
†
†
†
†
†
†
phone Black Stab. Stab. FL.
FL.
FL.
FL. Retard Retard
•–•
•–•
Brown Red Orange Yellow Green Blue Purple Gray White Gray ** Black Nat. Orange Yellow Green Pink Black Ivory •–•
Aqua
Blue
Maroon
109
76
702
*
*
*
*
*
*
*
*
•–•
•–•
Panduit
Part No. NONE
Suffix
0
00
1
2
3
4
5
6
7
8
10
14
20
30
39
53
54
55
59
60
69
300
120
100
MS3367
MS3368
MS17821
MS17822
Color
Suffix
*
0
1
2
3
4
5
6
7
8
*
*
*
*
*
*
*
*
*
*
*
*
*
*
BK
BR
R
OR
Y
GN
BL
P
GY
*
*
*
*
*
*
*
*
*
*
*
*
*
Color
9
MS18034
MS18035
NN
Color
Suffix
*Not applicable to military specified parts
**Pigmented black
•–• Weather resistant—for greater resistance to ultraviolet light.
†Meets MS3367 or MS3368 where applicable (specify MS number when ordering). All other parts meet
dimensional and tensile strength requirements of MS3367 or MS3368 where applicable.
FL Fluorescent Colors
36
„TEFZEL is the registered trademark of E.I. DuPont Co. Fluoropolymer
▲ HALAR is the registered trademark of Ausimont fluoropolymer
Cable Tie Part Number System, Available Colors & Materials
Shown is availability of cable tie colors & materials by package size. For custom color requirements,
contact factory.
S/B
S
/B
*
=
=
=
=
available in Standard and/or Bulk packaging
available in Standard packaging
available in Bulk packaging
Contact factory for availability of colors. (See Page 36 for description and suffix)
=
Part Number
Part Number Suffix
Material Designation
Natural 6.6
Nylon
Colors*
Telephone
Gray
-14
Weather
Weather
Heat Stab
Resistant Resistant 6.6
Black
6.6
Nylon Meets Nat. 6.6
Nylon
MIL Spec.
Nylon
—
See
Page 36
BC2S-S10
BC3S-S10
BC4S-S10
BC2LH-S25
BC3LH-S25
BC4LH-S25
S/B
S/B
S/B
S/B
S/B
S/B
/B
/B
/B
/B
/B
/B
BT2S
BT3S
BT4S
BT2LH
S/B
S/B
S/B
S/B
S/B
S/B
S/B
BT3LH
BT4LH
BT5LH
BT6LH
BT7LH
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
BT8LH
BT9LH
BT1M
BT1.5M
BT2M
BT3M
BT4M
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
BT1.5I
BT2I
BT3I
BT4I
S/B
S/B
S/B
S/B
S/B
/B
/B
S/B
S/B
S/B
S/B
S/B
S/B
-0
-00
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
DHC
S/B
IT940
IT965
IT9100
IT9115
IT9150
IT9250
/B
/B
/B
/B
/B
/B
/B
/B
-30
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
/B
/B
S/B
/B
/B
/B
/B
/B
S/B
S/B
S/B
S/B
S/B
S/B
/B
S/B
/B
S/B
S/B
/B
PLC1M-S4
PLC1.5I-S8
PLC2H-S25
PLC2S-S6
PLC2S-S10
PLC3H-S25
PLC3H-S25
PLC4H-S25
PLCR4H-S25
PLC4S-S10
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
/B
/B
S/B
/B
/B
S/B
S/B
/B
PLF1M
PLF1M-MP
PLF1MA
PLF1MB
PLM1M
PLM1M-MP
PLM2M
PLM2S
PLM4S
S/B
/B
S/B
S/B
S/B
/B
S/B
S/B
S/B
S/B
/B
PLP1S
PLP1.5S
PLP1.5I
PLP2S
S/B
S/B
/B
S/B
S/B
S/B
S/B
/B
/B
M6,M20
*S/B
MP3,10
*S/B
*S/B
*S/B
MP3,5,10
*S/B
*S/B
/B
S
/B
Heat Stab.
Weather
Resistant
6.6
Nylon
Flame
Retard.
Black
6.6
Nylon
Flame
Retard.
6.6
Nylon
Weather
Resistant
Nylon
12
Nat.
Polyprop
Weather
Resistant
Polyprop
TEFZEL„
HALAR▲
-39
-300
-60
-69
-120
-109
-100
-76
-702
/B
S/B
S/B
S/B
S/B
/B
PLB2S/PLB3S/PLB4S
/B
/B
Heat Stab
Natural
6.6
Nylon
S/B
S/B
S/B
S/B
S/B
S/B
/B
S/B
S/B
S/B
S/B
/B
/B
/B
/B
S/B
S/B
S/B
S/B
/B
/B
/B
/B
/B
S/B
PLST30SC/40SC/50SC
PLST30SD/40SD/50SD
PLST30SE,40SE,50SE
▲ HALAR is the Registered Trademark for Ausimont, Inc., fluoropolymer
/B
/B
/B
„ TEFZEL is the Registered trademark of E. I. DuPont Co., fluoropolymer
37
Cable Tie Color and Material Availability (Continued)
Shown is availability of cable tie colors & materials by package size.
For custom color requirements, contact factory.
S/B
S
/B
*
=
=
=
=
available in Standard and/or Bulk packaging
available in Standard packaging
available in Bulk packaging
Contact factory for availability of colors. ( See Page 36 for description and suffix)
Weather
Weather
Heat Stab
Resistant Resistant 6.6
Black
6.6
Nylon Meets Nat. 6.6
Nylon
MIL Spec.
Nylon
Natural 6.6
Nylon
Colors*
Telephone
Gray
Part Number Suffix
Material Designation
—
See
Page 36
-14
-0
PLT.6SM
PLT.7M
PLT1M
PLT1M-MP
PLT1S
PLT1.5I
PLT1.5I-MP
PLT1.5M
PLT1.5S
S/B
S/B
S/B
/B
S/B
S/B
/B
S/B
S/B
S/B
S/B
/B
S/B
/B
S/B
S/B
PLT2EH
PLT2H
PLT2I
PLT2M
PLT2S
PLT2S-MP
PLT2.5H
PLT2.5I
PLT2.5S
/B
S/B
S/B
S/B
S/B
/B
S/B
S/B
S/B
PLT3H
PLT3I
PLT3S
PLT3.5S
PLT4H
PLT4I
PLT4S
PLT4.5S
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
PLT5EH
PLT5H
PLT5S
PLT6EH
PLT6LH
PLT6H
PLT7LH
PLT8EH
PLT8H
PLT8LH
S/B
S/B
S/B
S/B
S/B
S/B
S/B
/B
S/B
S/B
PLT9LH
PLT10EH
PLT10LH
PLT12EH
PLT13H
S/B
/B
S/B
/B
S/B
PLWP1M
PLWP1S
PLWP1SA
PLWP1SB
PLWP1.5I
PLWP1.5S
PLWP1.5SA
PLWP1.5SB
S/B
S/B
S/B
/B
S/B
S/B
S/B
S/B
PLWP2H
PLWP2S
PLWP2SA
PLWP2SB
PLWP3H
PL2M2S
PL3M2S
/B
S/B
S/B
/B
/B
S/B
S/B
Part Number
PRLWP30S/50S
PLWP30SC/40SC/50SC
PLWP30SD/40SD/50SD
PLWP30SE/40SE/50SE
38
S/B
/B
S/B
/B
/B
/B
*S/B
/B
S/B
S/B
/B
/B
S/B
S/B
/B
/B
/B
*S/B
S/B
/B
/B
/B
S/B
S/B
S/B
/B
(-TL4)
(-C20)
/B
(-C20)
-Q3/-C3
/B
/B
/B
/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
-00
/B
S/B
S/B
/B
S/B
-30
S/B
/B
S/B
/B
/B
S/B
/B
/B
/B
S/B
/B
S/B
Heat Stab.
Weather
Resistant
6.6
Nylon
Flame
Retard.
Black
6.6
Nylon
Flame
Retard.
6.6
Nylon
Weather
Resistant
Nylon
12
Nat.
Polyprop
Weather
Resistant
Polyprop
TEFZEL„
HALAR ▲
-39
-300
-60
-69
-120
-109
-100
-76
-702
/B
/B
S/B
S/B
/B
/B
/B
/B
/B
/B
S/B
S/B
S/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
S/B
S/B
S/B
/B
/B
S/B
S/B
/B
S/B
/B
/B
/B
/B
/B
/B
S/B
/B
/B
S/B
/B
/B
/B
/B
S/B
/B
/B
/B
/B
S/B
/B
/B
/B.
/B
/B
S/B
/B
/B
S/B
S/B
.
S/B
S/B
/B
S/B
S/B
/B
/B
S/B
S/B
S/B
/B
/B
S/B
/B
S/B
/B
S/B
S/B
Heat Stab
Natural
6.6
Nylon
/B
/B
/B
/B
/B
S/B
/B
/B
/B
▲ HALAR is the Registered Trademark for Ausimont, Inc., fluoropolymer
„ TEFZEL is the Registered trademark of E. I. DuPont Co., fluoropolymer
S/B
Cable Tie Color and Material Availability (Continued)
Shown is availability of cable tie colors & materials by package size.
For custom color requirements, contact factory.
S/B
S
/B
*
Part Number
Part Number Suffix
Material Designation
=
=
=
=
available in Standard and/or Bulk packaging
available in Standard packaging
available in Bulk packaging
Contact factory for availability of colors. ( See Page 36 for description and suffix)
Natural 6.6
Nylon
Colors*
—
See
Page 36
Telephone
Gray
-14
Weather
Weather
Heat Stab
Resistant Resistant 6.6
Black
6.6
Nylon Meets Nat. 6.6
Nylon
MIL Spec.
Nylon
-0
-00
PRST30SC/30SD/30SE
PRST30S-S9/-S14
PRST40SC/40SD/40SE
PRST50SC/50SD/50SE
PRST50S-S9/-S14
-30
Heat Stab
Natural
6.6
Nylon
Heat Stab.
Weather
Resistant
6.6
Nylon
Flame
Retard.
Black
6.6
Nylon
Flame
Retard.
6.6
Nylon
Weather
Resistant
Nylon
12
Nat.
Polyprop
Weather
Resistant
Polyprop
TEFZEL „
HALAR▲
-39
-300
-60
-69
-120
-109
-100
-76
-702
/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
/B
PRT1S
PRT1.5S
PRT2EH
PRT2H
PRT2S
PRT3H
PRT3S
PRT4H
PRT4S
S/B
S/B
/B
S/B
S/B
S/B
S/B
S/B
S/B
PRT5EH
PRT6EH
PRT8EH
PRT10EH
PRT12EH
S/B
S/B
/B
/B
/B
S/B
S/B
S/B
S/B
S/B
PRWP1S
PRWP1SA
PRWP1SB
PRWP1.5I
PRWP1.5S
PRWP1.5SA
PRWP1.5SB
PRWP2S
PRWP2SA
PRWP2SB
PRWP3H
PRWP30SC/40SC/50SC
PRWP40SC/40SE/40SD
PRWP50SC/50SE/50SD
S/B
S/B
/B
S/B
S/B
/B
/B
S/B
/B
/B
/B
/B
SLT8LH
SLT10LH
SLT12H
SLT14H
SLT16H
SLT18H
S/
S/
S/
S/
S/
S/
M2,3,6
/B
(-M20)
/B
/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
S/B
/B
/B
/B
/B
/B
/B
/B
(-D20)
S/B
/B
(-D20)
/B
S/B
/B
/B
/B
/B
/B
/B
/B
S/
S/
▲ HALAR is the Registered Trademark for Ausimont, Inc., fluoropolymer
„TEFZEL is the Registered trademark of E. I. DuPont Co., fluoropolymer
39
Cable Tie Bulk Packaging
Bulk Package Part Numbers
The following is an alpha-numeric cross reference of Standard Package Cable Tie parts with the corresponding Bulk Package part numbers. Contact distributor for pricing of bulk package parts.
Standard Part No.
Bulk Part No.
Standard Part No.
B
Standard Part No.
Bulk Part No.
PLT1M-C59
PLT1M-M59
BC2S-S10-C
BC2S-S10-D
K-200
STD. ONLY
PLT1M-C76
PLT1M-M76
BC2S-S10-C0
BC2S-S10-D0
K-205
STD. ONLY
PLT1M-C702
PLT1M-M702
BC3S-S10-C
BC3S-S10-D
K-501
STD. ONLY
PLT1S-C
PLT1S-M
BC3S-S10-C0
BC3S-S10-D0
K-503
STD. ONLY
PLT1S-C0
PLT1S-M0
BC4S-S10-C
BC4S-S10-D
K-504
STD. ONLY
PLT1.5I-C
PLT1.5I-M
BC4S-S10-C0
BC4S-S10-D0
KB-550
STD. ONLY
PLT1.5I-C0
PLT1.5I-M0
BC2LH-S25-L
BC2LH-S25-TL
KP-505
STD. ONLY
PLT1.5M-C
PLT1.5M-M
BC2LH-S25-L0
BC2LH-S25-TL0
KP-506A
STD. ONLY
PLT1.5M-C0
PLT1.5M-M0
BC3LH-S25-L
BC3LH-S25-TL
KP-506A-0
STD. ONLY
PLT1.5S-C
PLT1.5S-M
BC3LH-S25-L0
BC3LH-S25-TL0
KP-509
STD. ONLY
PLT1.5S-C0
PLT1.5S-M0
BC4LH-S25-L
BC4LH-S25-TL
KP-510
STD. ONLY
PLT2EH-Q
PLT2EH-C
BC4LH-S25-L0
BC4LH-S25-TL0
KP-515
STD. ONLY
PLT2EH-Q0
PLT2EH-C0
PLT2H-L
PLT2H-TL
PLT2H-L0
PLT2H-TL0
BT1M-C
BT1M-M
BT1M-C0
BT1M-M0
PLB2S-C
PLB2S-M
PLB3S-C
PLB3S-M
PLT2I-C
PLT2I-M
PLT2I-M0
P
BT1.5M-C
BT1.5M-M
BT1.5M-C0
BT1.5M-M0
PLB4S-C
PLB4S-M
PLT2I-C0
BT2M-C
BT2M-M
PLC1M-S4-C
PLC1M-S4-M
PLT2I-C53
PLT2I-M53
BT2M-C0
BT2M-M0
PLC1M-S4-C0
PLC1M-S4-M0
PLT2I-C54
PLT2I-M54
BT3M-C
BT3M-M
PLC1.5I-S8-C
PLC1.5I-S8-M
PLT2I-C55
PLT2I-M55
BT3M-C0
BT3M-M0
PLC1.5I-S8-C0
PLC1.5I-S8-M0
PLT2I-C59
PLT2I-M59
BT4M-C
BT4M-M
PLC2S-S6-C
PLC2S-S6-M
PLT2I-C76
PLT2I-M76
BT4M-C0
BT4M-M0
PLC2S-S6-C0
PLC2S-S6-M0
PLT2M-C
PLT2M-M
BT1.5I-C
BT1.5I-M
PLC2S-S10-C
PLC2S-S10-M
PLT2M-C0
PLT2M-M0
BT1.5I-C0
BT1.5I-M0
PLC2S-S10-C0
PLC2S-S10-M0
PLT2S-C
PLT2S-M
BT2I-C
BT2I-M
PLC2H-S25-L
PLC2H-S25-TL
PLT2S-C0
PLT2S-M0
BT2I-C0
BT2I-M0
PLC2H-S25-L0
PLC2H-S25-TLO
PLT2S-C53
PLT2S-M53
BT3I-C
BT3I-M
PLC3S-S10-C
PLC3S-S10-M
PLT2S-C54
PLT2S-M54
BT3I-CO
BT3I-M0
PLC3S-S10-C0
PLC3S-S10-M0
PLT2S-C55
PLT2S-M55
BT4I-C
BT4I-M
PLC3H-S25-L
PLC3H-S25-TL
PLT2S-C59
PLT2S-M59
BT4I-C0
BT4I-M0
PLC3H-S25-L0
PLC3H-S25-TL0
PLT2S-C76
PLT2S-M76
BT2S-C
BT2S-M
PLC4S-S10-C
PLC4S-S10-M
PLT2S-C702
PLT2S-M702
BT2S-C0
BT2S-M0
PLC4S-S10-C0
PLC4S-S10-M0
PLT2.5I-C
PLT2.5I-M
BT3S-C
BT3S-M
PLC4H-S25-L
PLC4H-S25-TL
PLT2.5I-C0
PLT2.5I-M0
BT3S-C0
BT3S-M0
PLC4H-S25-L0
PLC4H-S25-TL0
PLT2.5S-C
PLT2.5S-M
BT4S-C
BT4S-M
PLCR4H-S25-L
PLCR4H-S25-TL
PLT2.5S-C0
PLT2.5S-M0
BT4S-C0
BT4S-M0
PLCR4H-S25-L0
PLCR4H-S25-TL0
PLT2.5H-L
PLT2.5H-TL
BT2LH-L
BT2LH-Tl
PLF1M-C
PLF1M-M, -MP
PLT2.5H-L0
PLT2.5H-TL0
BT2LH-L0
BT2LH-TL0
PLF1MA-C
PLF1MA-M
PLT3H-L
PLT3H-TL
BT3LH-L
BT3LH-TL
PLF1MB-C
PLF1MB-M, -4KR
PLT3H-L0
PLT3H-TL0
BT3LH-L0
BT3LH-TL0
PLM1M-C
PLM1M-M, -MP, -4KR
PLT3H-L76
PLT3H-TL76
BT4LH-L
BT4LH-TL
PLM2M-C
PLM2M-M
PLT3I-C
PLT3I-M
BT4LH-L0
BT4LH-TL0
PLM2S-C
PLM2S-M
PLT3I-C0
PLT3I-M0
PLM4S-C
PLM4S-M
PLT3S-C
PLT3S-M
PLT3S-M0
BT5LH-L
BT5LH-C
BT5LH-L0
BT5LH-C0
PLP1S-C
PLP1S-M
PLT3S-C0
BT6LH-L
BT6LH-C
PLP1.5I-C
PLP1.5I-M
PLT3S-C53
PLT3S-M53
BT6LH-L0
BT6LH-C0
PLP1.5S-C
PLP1.5S-M
PLT3S-C54
PLT3S-M54
BT7LH-L
BT7LH-C
PLP2S-C
PLP2S-M
PLT3S-C55
PLT3S-M55
BT7LH-L0
BT7LH-C0
PLT.6SM-C
PLT.6SM-M
PLT3S-C59
PLT3S-M59
BT8LH-L
BT8LH-C
PLT.7M-C
PLT.7M-M
PLT3S-C76
PLT3S-M76
BT8LH-L0
BT8LH-C0
PLT1M-C
PLT1M-M
PLT3S-C702
PLT3S-M702
BT9LH-L
BT9LH-C
PLT1M-C0
PLT1M-M0
PLT4H-L
PLT4H-TL
BT9LH-L0
BT9LH-C0
PLT1M-C53
PLT1M-M53
PLT4H-L0
PLT4H-TL0
PLT1M-C54
PLT1M-M54
PLT4H-L76
PLT4H-TL76
PLT1M-C55
PLT1M-M55
PLT4I-C
PLT4I-M
D
DHC1.12X1.75-L0
40
Bulk Part No.
K
DHC1.12X1.75-D0
Cable Tie Bulk Packaging
Bulk Package Part Numbers (continued)
The following is an alpha-numeric cross reference of Standard Package Cable Tie parts with the corresponding Bulk Package part numbers. Contact distributor for pricing of bulk package parts.
Standard Part No.
Bulk Part No.
Standard Part No.
Bulk Part No.
PLT4I-C0
PLT4I-M0
PLWP2S-C
PLWP2S-D
PLT4S-C
PLT4S-M
PLWP2SA-C
PLWP2SA-D
PLT4S-C0
PLT4S-M0
PL2M2S-L
PL2M2S-D
PLT4S-C76
PLT4S-M76
PL3M2S-L
PL3M2S-D
PLT5EH-Q
PLT5EH-C
PRLWP30S-C30
PRLWP30S-D30
PLT5EH-Q0
PLT5EH-C0
PRLWP50S-C30
PRLWP50S-D30
PLT5H-L
PLT5H-TL
PRT4S-C
PRT4S-M
PLT5H-L0
PLT5H-TL0
PRT1S-C
PRT1S-M
PLT5S-C
PLT5S-M
PRT1S-C0
PRT1S-M0
PLT5S-C0
PLT5S-M0
PRT1.5S-C
PRT1.5S-M
PLT6EH-Q
PLT6EH-C
PRT1.5S-C0
PRT1.5S-M0
PLT6EH-Q0
PLT6EH-C0
PRT2EH-Q
PRT2EH-C
PLT6H-L
PLT6H-TL
PRT2EH-Q0
PRT2EH-C0
PLT6H-L0
PLT6H-TL0
PRT2H-L
PRT2H-TL
PLT6LH-L
PLT6LH-TL
PRT2H-L0
PRT2H-TL0
PLT6LH-L0
PLT6LH-TL0
PRT2S-C
PRT2S-M
PLT7LH-L
PLT7LH-C
PRT2S-C0
PRT2S-M0
PLT7LH-L0
PLT7LH-C0
PRT3H-L
PRT3H-TL
PLT8EH-Q0
PLT8EH-C0
PRT3H-L0
PRT3H-TL0
PLT8H-L
PLT8H-C
PRT3S-C
PRT3S-M
PLT8H-L0
PLT8H-C0
PRT3S-C0
PRT3S-M0
PLT8LH-L
PLT8LH-C
PRT4H-L
PRT4H-TL
PLT8LH-L0
PLT8LH-C0
PRT4H-L0
PRT4H-TL0
PLT9LH-L
PLT9LH-C
PRT4S-C
PRT4S-M
PLT9LH-L0
PLT9LH-C0
PRT4S-C0
PRT4S-M0
PLT10LH-L
PLT10LH-C
PRT5EH-Q
PRT5EH-C
PLT10EH-Q
PLT10EH-C
PRT5EH-Q0
PRT5EH-C0
PLT10EH-Q0
PLT10EH-C0
PRT6EH-Q
PRT6EH-C
PLT12EH-Q
PLT12EH-C
PRT6EH-Q0
PRT6EH-C0
PLT13EH-Q
PLT13EH-C
PRT8EH-Q
PRT8EH-C
PLT13EH-Q0
PLT13EH-C0
PRT8EH-Q0
PRT8EH-C0
PLWP1M-C
PLWP1M-D
PRT10EH-Q0
PRT10EH-C0
PLWP1S-C
PLWP1S-D
PRT12EH-Q0
PRT12EH-C0
PLWP1SA-C
PLWP1SA-D
PRWP1S-C
PRWP1S-D
PLWP1.5I-C
PLWP1.5I-D
PRWP1SA-C
PRWP1SA-D
PLWP1.5S-C
PLWP1.5S-D
PRWP1.5I-C
PRWP1.5I-D
PLWP1.5SA-C
PLWP1.5SA-D
PRWP1.5S-C
PRWP1.5S-D
PLWP1.5SB-C
PLWP1.5SB-D
PRWP2S-C
PRWP2S-D
41
Cable Tie Kits
Cable Tie Kits in
Plastic Boxes
KP-506A/KP-506-0
Cable Ties and
Accessories Kit
Part Number
KP-506A
Contains natural nylon ties for indoor use:
(100) PLT1M-C Cable Ties
(100) PLT1.5I-C Cable Ties
(100) PLT2S-C Cable Ties
(50) ABM2S-A Mounts
(1) KP-505 Plastic Kit Box
1
KP-506A-0
Contains weather resistant cable ties and mounts for outdoor use:
(100) PLT1M-C0 Black Weather Resistant Cable Ties
(100) PLT1.5I-C0 Black Weather Resistant Cable Ties
(100) PLT2S-C0 Black Weather Resistant Cable Ties
(50) ABM2S-AT-0 Black Weather Resistant Mounts
(1) KP-505 Plastic Kit Box
1
KP-509
A special collection of cable ties and wiring accessories for prototyping and new product
development.
Contains (over 600 pieces):
Including PAN-TY ® Cable Ties (in different styles, sizes, colors and
materials); 25 different cable tie mounts; 30 different wiring accessories;
(1) KP-510 plastic kit box
1
KB-550
Assortment Pack contains natural and weather resistant PAN-TY nylon cable ties:
(15) PLT1M-C Cable Ties
(10) PLT1M-C0 Black Weather Resistant Cable Ties
(15) PLT1.5I-C Cable Ties
(10) PLT1.5I-C0 Black Weather Resistant Cable Ties
(15) PLT2S-C Cable Ties
(10) PLT2S-C0 Black Weather Resistant Cable Ties
(15) PLT3S-C Cable Ties
(10) PLT3S-C0 Black Weather Resistant Cable Ties
1
KB-551
Assortment Pack contains natural and weather resistant DOME-TOP ® BARB-TY ®
nylon cable ties:
(15) BT1M-C Cable Ties
(10) BT1M-C0 Black Weather Resistant Cable Ties
(15) BT1.5I-C Cable Ties
(10) BT1.5I-C0 Black Weather Resistant Cable Ties
(15) BT2S-C Cable Ties
(10) BT2S-C0 Black Weather Resistant Cable Ties
(15) BT3S-C Cable Ties
(10) BT3S-C0 Black Weather Resistant Cable Ties
1
K-504
Contains cable ties, adhesive backed mounts and cable tie installation tool:
(100) PLT1M-C Cable Ties
(100) PLT1.5I-C Cable Ties
(100) PLT2S-C Cable Ties
(100) PLC2S-S10-C Clamp Ties
(100) TM2S8-C Mounts
(100) ABM2S-A-C Mounts
(1) STS2 Tool
(1) K-503 Steel Kit Box
1
SR2
2-Drawer Slide Rack to hold K-504 Kit or K-1100 Series Terminal Kits
See Panduit Terminal Catalog, SA101N21A.
1
SR4
4-Drawer Slide Rack to hold K-504 Kit or K-1100 Series Terminal Kits
See Panduit Terminal Catalog, SA101N21A.
1
SR6
6-Drawer Slide Rack to hold K-504 Kit or K-1100 Series Terminal Kits
See Panduit Terminal Catalog, SA101N21A.
1
SRB
Base accommodates SR2, SR4 and SR6 Slide Racks
1
K-205
Contains 300 cable ties, 600 terminals and 2 installation tools:
(100) PLT1M-C Cable Ties
(100) PLT1.5I-C Cable Ties
(100) PLT2S-C Cable Ties
(1) GS2B Cable Tie Installation Tool
(100) PV18-6LF-C Terminals
(100) PV14-8LF-C Terminals
(100) PV14-10LF-C Terminals
(50) PV10-10LF-C Terminals
(100) BSV18X-C Splices
(100) BSV14X-C Splices
(50) BSV10X-C Splices
(1) CT-100 Crimping Tool
(1) K-200 Steel Kit Box
1
KP-509 Designer’s Kit
Cable Tie Kits in
Steel Boxes
K-504 Cable Ties and
Accessories Kit
K-205 Cable Ties and
Terminal Kit
42
Description
Std.
Pkg.
Qty.
Order the Number of Kits Required in Multiples of Packaging Quantities.
Cable Tie Installation Tools
43
Cable Tie Installation Tools
Cable Tie Installation Tools
The PANDUIT Selection. . .
Panduit offers the greatest selection of job-matched tools.
PAT1M/PAT1.5M Automatic Cable Tie
Installation Systems
PAT2S Automatic Cable Tie Installation
System
Pneumatic Tool Controlled Tension and
Cutoff Tools
Tool Controlled Tension and
Cutoff Tools
PET1M/PET1.5M Portable Automatic
Cable Tie Installation Systems
Operator Controlled Tension and
Cutoff Tools
Choosing the right tool increases productivity. . .
Whatever the need; Original Equipment Manufacturer (high, medium, low volume), maintenance/repair or
construction; Panduit has the tool to help lower your total installed cost. The following chart can be used as a
guide for tool selection:
Tool
Cable Tie
Cross
Section
Cable Tie Usage
Per Minute
Per Year
Min.
PAT1M/PAT1.5M
Systems (Automatic)
30-40
200,0001,000,000
Std.
28-33
200,0001,000,000
Min.
PET1M/PET1.5M
Systems (Automatic)
25-35
100,000500,000
PAT2S
System (Automatic)
PPTS
Min., Int. or
Std.
PPTEH
Lt. Hvy., Hvy.
or Ex. Hvy.
GS2B/GS2BL
Min., Int. or
Std.
GS4H
Std. Lt. Hvy.
or Hvy.
GS4H/B
Lt. Hvy. or Hvy.
GS4H121W
Lt. Hvy. or Hvy.
GS4EH
Lt. Hvy., Hvy.
or Ex. Hvy.
STS2
Min., Int. or
Std.
STH2
Std., Lt. Hvy.
or Hvy.
ST2EH
Lt. Hvy., Hvy.
or Ex. Hvy.
STHV
Lt. Hvy. or Hvy.
44
Operation
Pneumatic/
Electric
Electric
Typical Application(s)
High Volume OEM tie usage
Medium to High Volume OEM tie usage
5-8
25,000150,000
Pneumatic
4-6
Under
50,000
Hand
Low to Medium Volume OEM tie usage, maintenance/repair or
construction
1-4
Under
10,000
Hand
Maintenance/repair or construction
Medium to High Volume OEM tie usage where a variety of tie sizes are
needed.
Fully Automatic Cable Tie Installation Systems
Automatic Cable
Tie Installation
Systems
PANDUIT automatic tooling makes everything else obsolete. With the
squeeze of a trigger, it applies, tensions, and cuts off the excess cable
tie—all in less than 1 second. Automatic tooling will reduce your
labor costs, minimize your total installed cost.
There are three tool systems to meet your needs:
1. PAT1M/PAT1.5M — Automatic Cable Tie Installation Systems (Pages 46 & 48 )
(Stationary Dispenser)
Installs Miniature Cross Section Cable Ties (18 lb. (80N) minimum loop tensile)
2. PAT2S — Automatic Cable Tie Installation System (Pages 47 & 48)
(Stationary Dispenser)
Installs Standard Cross Section Cable Ties (50 lb. (222N) minimum loop tensile)
3. PET1M/PET1.5M — Automatic Electric Cable Tie Installation Systems
(Pages 50 & 51)
(Portable Hand Held Tool)
Installs Miniature Cross Section Cable Ties (18 lb. (80N) minimum loop tensile)
45
Fully Automatic Cable Tie Installation Systems
1. PAT1M/PAT1.5M Reel-Fed Systems for Miniature Cross Section
Cable Ties (18 lb. (80N) minimum loop tensile)
• The system consists of the tool, dispenser, feeder hose and reel-fed
continuously molded cable ties (5000 ties per reel). Each system will install
a cable tie in less than one second.
• Choice of two tool head sizes for bundle diameters up to .82" (21mm) or up
to 1.3" (33mm)
• The dispenser and hose are designed to operate with either tool head for
maximum versatility and economy.
• The system design permits complete mobility in the use of the tool and
location of the dispenser.
• The system operates on 65 psig. non-lubricated, filtered air and
100 VAC, 120 VAC and 230 VAC.
• Optional bench mount shown on Page 48.
Tool Heads
Part Number
Pkg.
Qty.
Description
PAT1M
Tool head for cable ties up to .82" (21mm) bundle diameter (PLT1M-XMR)
1
PAT1.5M
Tool head for cable ties up to 1.3" (33mm) bundle diameter (PLT1.5M-XMR)
1
• Lightweight, no counter-balance required
• Slim, ergonomically designed handle for operator comfort and
greater productivity. Reduces potential for repetitive motion injuries
• Right or left hand operation
• Durable, one-piece cable tie tip collector (for cut-off tips)
• Includes tension adjustment
Dispenser
PDM
Stationary dispenser for 100 VAC, 120 VAC and 230 VAC
1
• The dispenser monitors performance. If an error occurs an alarm is
sounded
• On-line HELP menu
• Multi-language capability via LCD display (English, Spanish, German,
Italian or French)
• Cable tie reels are easily loaded into the dispenser, reducing downtime
• Audible reload signal when reel is empty
• Minimum maintenance required
Specifications
• Power cord included
Pneumatic
• Operates at 65
psig minimum
• 7 scfm flow minimum
• Operates on
non-lubricated air.
(choose one)
Feeder Hose
Electrical
• 100, 120, or 230
VAC
• 50/60 Hz.
• Less than 1 amp
• Approx. 20 watts
(AVG)
PHM1
3.2 ft. (1 meter) Feeder hose
PHM2
6.5 ft. (2 meter) Feeder hose
1
PHM3
9.8 ft. (3 meter) Feeder hose
1
•
•
•
•
1
Transfers cable ties and signal from dispenser to tool
Available in three lengths for either tool head
Reversible
Large electrical connectors, quick & easy connections
Other Components
46
PDH10-37
Main air supply hose (regulator to dispenser). 9.8 ft. (3m). Includes a 3/8" NPT
male thread (to regulator) and 3/8" female quick-disconnect (to dispenser)
PL283N1
Filter/regulator 25 micron (max.) element, 5 psi (max.) pressure drop @ 85 psig
inlet pressure and 16 cfm flow @ 85 psig; 3/8" ports
See Page 49 for Cable Ties and Pages Pages 121 to 126 for Harness Board Accessories
1
1
Automatic Cable Tie Installation Systems
2. PAT2S Reel-Fed System for
Standard Cross Section Cable Ties (50 lb. (222N) minimum loop tensile)
Automatically installs cable ties on bundles of up to 2" (51mm)
in diameter.
• The system consists of the tool, dispenser, dispenser frame, feeder
hose and reel-fed continuously molded cable ties (2500 ties per reel).
• The PAT2S System installs PLT2S-VMR continuously molded cable
ties in approximately 1 second. Reload time is minimized by large
reels of 2500 ties per reel.
• Ability to increase the tension of the cable ties provides greater
resistance to lateral movement.
• High cable tie loop tensile strength of 50 lbs. (222N) minimum.
Tool Head
Part Number
PAT2S
Pkg.
Qty.
Description
Tool head for cable ties up to 2" (51mm) bundle diameter (PLT2S-VMR)
1
•
•
•
•
Open jaw design
1 trigger operation
Right or left hand operation
Tension adjustments are made without special tools• Minimum
maintenance required
• Operates in any orientation
• Tip collector included
• Lightweight counter balance optional
Dispenser
PDS
Dispenser with Electronic Display
1
• Cable tie reels are easily loaded into the dispenser, reducing
downtime
• Audible reload signal when reel is empty
• LCD messages in 5 languages (English, French, German, Italian,
Spanish)
• Power cord included
• Auto adjust for various domestic and international voltages
Specifications
Pneumatic
• Operates at 65 psig.
• 7 scfm flow
• Operates on
non-lubricated air.
Other Components
Electrical
• 100, 115, 220, or 240 VAC
• 50/60 Hz.
• Approx.100 watts (AVG)
PDSF
Dispenser Frame/Reel Holder
1
PHS3
9.8 ft. (3m) feeder hose. Transfers cable ties and signal from dispenser to tool
1
PDH10-37
Main air supply hose (regulator to dispenser). 9.8 ft. (3m). Includes a 3/8" NPT
male thread (to regulator) and 3/8" female quick-disconnect (to dispenser)
1
PL283N1
Filter/regulator 25 micron (max.) element, 5 psi (max.) pressure drop @ 85 psig
inlet pressure and 16 cfm flow @ 85 psig; 3/8" ports
1
PAT2SBM
Bench mount and foot pedal for PAT2S System (shown on Page 48)
1
See Page 49 for Cable Ties and Pages Pages 121 to 126 for Harness Board Accessories
47
Automatic Cable Tie Installation Systems
PATMBM Bench Mount used with
PAT1M PAT1.5M Automatic Systems for
Miniature Cross Section Cable Ties (18 lb. (80N) minimum loop tensile)
For Operations Where the Application is Brought to the Tool
• Used with either PAT1M or PAT1.5M tool head
• Supplied with a foot-actuated pedal to allow operator to work with both
hands
• A tool can be installed in the mount in seconds
• Supplied with a four-hole base plate
• The bench mount operates on 65 psi non-lubricated, filtered air which
pilots off of the dispenser.
In addition to tool head, dispenser, feeder hose and cable ties on
reels; order the following:
Part Number
PATMBM
Description
Bench mount and foot pedal for PAT1M/PAT1.5M system, four-hole base
plate.
Pkg.
Qty.
1
PAT2SBM Reel-Fed Bench Mount Application used with
PAT2S Automatic System for
Standard Cross Section Cable Ties (50 lb. minimum loop tensile)
For Operations Where the Application is Brought to the Tool
• Used with PAT2S tool head.
• Supplied with a foot-actuated pedal to allow operator to work with both
hands.
• A tool can be installed in the mount in seconds
• Supplied with a four-hole base plate.
• The bench mount operates on 65 psi non-lubricated, filtered air which
pilots off of the dispenser.
In addition to tool head, dispenser, dispenser frame, feeder hose and cable ties on reels;
order the following:
Part Number
PAT2SBM
48
Description
Pkg.
Qty.
Bench mount and foot pedal for PAT2S system, four-hole base plate.
1
See Page 49 for Cable Ties and Pages Pages 121 to 126 for Harness Board Accessories
Cable Ties for Automatic Installation Systems
Cable Ties for
PAT1M/PAT1.5M
Systems
(Pages 46 & 48)
Continuously molded cable ties in sizes, color and material options to meet
the application.
Part Number
Color
Max.
Bundle
Diameter
In. (mm)
Length
In. (mm)
Width
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Use with
PANDUIT ®
Part No.
Cable Ties for PAT1M/PAT1.5M Systems
6/6 Nylon (for indoor use) up to 185 °F (85°C)
Cable Ties on
• Miniature cross section
cable ties
• Self-locking
• U.L. Recognized
• 5000 ties/reel
PLT1M-XMR
Natural
PLT1M-XMR1
PLT1M-XMR2
PLT1M-XMR3
PLT1M-XMR4
Brown
Red
Orange
Yellow
PLT1M-XMR5
PLT1M-XMR6
PLT1M-XMR7
PLT1M-XMR8
PLT1M-XMR10
Green
Blue
Purple
Gray
White
PLT1.5M-XMR
Natural
PLT1.5M-XMR1
PLT1.5M-XMR2
PLT1.5M-XMR3
PLT1.5M-XMR4
Brown
Red
Orange
Yellow
PLT1.5M-XMR5
PLT1.5M-XMR6
PLT1.5M-XMR7
PLT1.5M-XMR8
PLT1.5M-XMR10
Green
Blue
Purple
Gray
White
.06-.82
(1.5-20.8)
4.0
(102)
.10
(2.5)
18
(80)
PAT1M
.06-1.30
(1.5-33)
5.6
(142)
.10
(2.5)
18
(80)
PAT1.5M
Weather-Resistant Nylon (for outdoor use) up to 185 ° F (85° C)
PLT1M-XMR00
Black
.06-.82
(1.5-20.8)
4.0
(102)
.10
(2.5)
18
(80)
PAT1M
PLT1.5M-XMR00
Black
.06-1.30
(1.5-33)
5.6
(142)
.10
(2.5)
18
(80)
PAT1.5M
Heat Stabilized Nylon (for indoor use) up to 221° F (105° C)
PLT1M-XMR30
Black
.06-.82
(1.5-20.8)
4.0
(102)
.10
(2.5)
18
(80)
PAT1M
PLT1.5M-XMR30
Black
.06-1.30
(1.5-33)
5.6
(142)
.10
(2.5)
18
(80)
PAT1.5M
Flammability Rating: U.L. 94V-2, ATB < sec. per ASTM-D635
Cable Ties for
PAT2S System
(Pages 47 & 48)
Continuously molded cable ties in sizes and material options to meet the
application.
The PAT2S system installs PANDUIT PLT2S-VMR locking cable ties.
Cable ties are easily loaded or unloaded from the dispenser for quick reel
changes, reducing downtime. Carrier strip connects 2500 ties in one
continuous reel for long periods between reloads.
Cable Ties on Reels
Part Number
Color
Max.
Bundle
Diameter
In. (mm)
Length
In. (mm)
Width
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
.190
(4.8)
50
(222)
PAT2S
50
(222)
PAT2S
Use with
PANDUIT ®
Part No.
Cable Ties for PAT2S System
• Standard cross section
cable ties
• Self-locking
• U.L. Recognized
• 2500 ties/reel
Reels of 2,500—
2 Reels/carton
6/6 Nylon (for indoor use) up to 185 ° F (85° C)
PLT2S-VMR
Natural
2.0
(50)
8.1
(206)
Heat-Stabilized Nylon (for indoor use) up to 221° F (105° C)
PLT2S-VMR30
Black
2.0
(50)
8.1
(206)
.190
(4.8)
Consult factory for color and weather resistant cable tie options.
Flammability Rating: U.L. 94V-2, ATB:5 sec., per ASTM-D635
49
Portable Fully Automatic Cable Tie Installation System
3. PET1M/PET .5M Systems for
Miniature Cross Section Cable Ties (18 lb. (80N) minimum loop tensile)
Completely portable, electric and automatic cable tie installation systems
which install cable ties in less than one second, minimizing your total
installed cost.
• Built for portability, the PET battery-operated tools are lightweight and have
excellent balance and ergonomics. They can install cable ties in those areas
that have been inaccessible by stationary tool systems.
• With the squeeze of the trigger, the PET tools install Panduit’s continuously
molded miniature cross section cable ties. The ties are available in strips of 50
or by the reel which allows the user to cut strips of custom lengths.
PET1M Tool Head
Part Number
PET1M
Description
Tool head for cable ties up to .82" (21mm) bundle diameter (PLT1M-5K) or
(PLT1M-XMR)
•
•
•
•
•
•
•
•
PET1.5M Tool Head
PET1.5M
•
•
•
•
•
1
Open jaw design
1 trigger operation
Ergonomic and lightweight
3 electric power options: rechargeable battery cartridge, rechargeable
batterybelt and AC adapter
Adjustable tension
Anti-pinch jaws• On/Off switch with tool status
Auto shutoff
Tip collector included
Tool head for cable ties up to 1.3" (33mm) bundle diameter (PLT1.5M-5K) or
(PLT1.5M-XMR)
•
•
•
•
Pkg. Qty.
1
Open jaw design
1 trigger operation
Ergonomic and lightweight
3 electric power options: rechargeable battery cartridge, rechargeable
batterybelt and AC adapter
Adjustable tension
Anti-pinch jaws
On/Off switch with tool status
Auto shutoff
Tip collector included
Battery Cartridge
(Ni-Cad)
PET-BS
Removable, rechargeable battery cartridge
1
• Charging time is 45-60 minutes
• One charge will install approximately 200 cable ties
• One battery weighs 0.5 lbs.
PET-BS (front and back view shown)
Battery Belt
PET-BB
Removable, rechargeable battery belt
•
•
•
•
50
Charging time is 4-6 hours
One charge will install approximately 2000 cable ties
Battery belt weighs 2 lbs.
Includes a utility hook for hanging the tool and a pouch for carrying
miscellaneous items
See Page 49 for Cable Ties and Pages Pages 121 to 126 for Harness Board Accessories
1
Cable Ties/Accessories for PET Installation Tools
Battery Charger
Part Number
Description
Pkg. Qty.
PET-CHR
Battery charger 120 VAC
1
PET-CHR100
Battery charger 100 VAC
1
PET-CHR230
Battery charger 230 VAC
1
•Charges one or two batteries or battery belts at a time
AC Adaptor
PET-AC
AC adaptor 120 VAC
1
PET-AC100
AC adaptor 100 VAC
1
PET-AC230
AC adaptor 230 VAC
1
PET-ACC3
AC adaptor cord 9.8 ft. (3 meters)
1
PET-ACC6
AC adaptor cord 19.7 ft. (6 meters)
1
•Provides unlimited power to the tool
Cable Ties for
PET1M/PET1.5M
Systems
Part Number
Color
Max.
Bundle
Diameter
In. (mm)
Length
In. (mm)
Width
In. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
.10
(2.5)
18
(80)
.10
(2.5)
18
(80)
Use with
PANDUIT ®
Part No.
Cable Ties for PET1M/PET1.5M System
(See Page 50)
Cable Ties on Strips
6.6 Nylon (for indoor use) -40° F to 185° F
PLT1M-5K
PLT1.5M-5K
Natural
.82
(21)
4.0
(102)
1.3
(33)
5.6
(142)
PET1M
PET1.5M
Heat Stabilized Nylon (for outdoor use) up to 221 ° F
PLT1M-5K30
PLT1.5M-5K30
Black
.82
(21)
4.0
(102)
1.3
(33)
5.6
(142)
PET1M
PET1.5M
6.6 Nylon (for indoor use) up to 185° F (85° C)*
PLT1M-XMR
Natural
.06-.82
(1.5-20.8)
4.0
(102)
.10
(2.5)
18
(80)
PET1M
PLT1.5M-XMR
Natural
.06-1.30
(1.5-33)
5.6
(142)
.10
(2.5)
18
(80)
PET1.5M
100 strips of 50 ties/ctn.
Weather-Resistant Nylon (for outdoor use) up to 185° F (85° C)
Cable Ties on Reels
PLT1M-XMR00
Black
.06-.82
(1.5-20.8)
4.0
(102)
.10
(2.5)
18
(80)
PET1M
PLT1.5M-XMR00
Black
.06-1.30
(1.5-33)
5.6
(142)
.10
(2.5)
18
(80)
PET1.5M
Heat Stabilized Nylon (for indoor use) up to 221 ° F (105° C)
PLT1M-XMR30
Black
.06-.82
(1.5-20.8)
4.0
(102)
.10
(2.5)
18
(80)
PET1M
PLT1.5M-XMR30
Black
.06-1.30
(1.5-33)
5.6
(142)
.10
(2.5)
18
(80)
PET1.5M
Flammability Rating: U.L. 94V-2, ATB < sec. per ASTM-D635
Refer to page 49 for colors.
2 reels of 5,000 ties/ctn.
51
Pneumatic Hand Tools
Pneumatic Hand
Tools
Tool-Controlled Tension
and Cut-Off
Two tools cover the full line of PANDUIT Cable Ties for production
applications. The tools pneumatically tension and cut off excess tie
after it is hand-installed around the bundle, minimizing operator fatigue.
Both tools are rugged, yet lightweight.
For PANDUIT Cable Ties up to 1/2" (12.7mm) wide.
• Easy to change tension adjustment
• Requires no special training to use
• Durable, lightweight, easy to operate and designed to reduce operator
fatigue
• Tensions and cuts off excess tie in a fraction of a second
• Operates on non-lubricated air, without special maintenance
• New powder coat finish
Part Number
PPTS
Description
Installs Miniature, Intermediate or Standard cross section cable ties
Pkg.
Qty.
1
Color identification: (knob) Black
Weight: 18 oz. (510g)
Replacement part kits can be part of a scheduled maintenance program
PPTEH
Installs Light Heavy, Heavy and Extra Heavy cross section cable ties.
1
Color Identification: (knob) Blue
Weight: 52 oz. (147g)
Replacement part kits can be part of a scheduled maintenance program
PPH10
10 ft. (3m) Hose Assembly (regulator to tool). Includes a 1/8" NPT male
connector (to regulator) and 1/8" female quick disconnect fitting (to tool).
1
PL289N1
Filter/Regulator .5 micron (max.) element, regulated range 3-100 PSIG,
1/8" ports
1
PPTS and PPTEH
Other Components
Note: PPTS and PPTEH tools require the PPH10 hose and PL289N1 Filter/Regulator for proper operation.
52
Hand-Operated Tools
Hand-Operated
Tools
Tool-Controlled Tension
and Cut-Off
The most preferred hand-operated cable tie tools in the industry.
These tools are versatile and can be used for production, maintenance
or construction applications. These tools will tension and cut off
excess tie material to the head by squeezing trigger handle.
For PANDUIT Cable Ties up to 1/2" (12.7mm) wide
•
•
•
•
Lightweight and balanced
Requires no special maintenance
Easy to change tension adjustment and easy to operate
Proven features to help lower installed costs; a combination of
design, operating and construction features provide a long service life
• Durable powder coat finish
• Replacement blades available
Part Number
GS2B
Description
Installs Miniature, Intermediate or Standard cross section cable ties.
Qualified product listed per Mil. Std. MS90387-1 and Mil. Spec. MIL-T-81306A.
Color Identification:
Trigger Handle: Black
Weight: 10 oz. (284g)
GS2BL
Pkg.
Qty.
1
Selector Knob: Black
Same as GS2B except handle span is reduced 25% - for workers with smaller
hands. Qualified product listed per Mil. Std. MS90387-1 and Mil. Spec.
MIL-T-81306A.
1
Color Identification:
Housing is distinctive maroon color.
Trigger Handle: Black
Selector Knob: Black
Weight: 10 oz. (284g)
GS4H
Installs Standard, Light Heavy and Heavy cross section cable ties. Also installs
SUPERFLEX ™ (SLT) cable ties. Qualified product listed per Mil. Std.
MS90387-2 and Mil. Spec. MIL-T-81306A.
Color Identification:
Trigger Handle: Red
Weight: 16 oz. (454g)
GS4H/B
1
Selector Knob: Red
Installs Standard, Light Heavy and Heavy cross section cable ties. Also installs
SUPERFLEX (SLT) cable ties. High tension, factory set, non-adjustable
1
Color Identification: Trigger Handle: Blue
Weight: 16 oz. (454g)
GS4H121W
Installs Light Heavy and Heavy cross section cable ties. This tool provides
greater tension, especially on 175 lb. strength ties, which results in tighter
bundles.
Color Identification:
Trigger Handle: Green
Weight: 16 oz. (454g)
GS4EH
Selector Knob: Green
Installs Light Heavy, Heavy and Extra Heavy cross section cable ties.
Color Identification:
Trigger Handle: Blue
Weight: 16 oz. (454g)
1
1
Selector Knob: Blue
53
Hand-Operated Tools
PPTS, PPTEH, GS2B, GS2BL, GS4H, GS4H121W, GS4EH Tools
Adjustment Features
Tension Indicator
Each cross section of cable ties can be installed with a variety of tensions to
meet the application. The proper tensions (listed on PANDUIT cable tie
packages) are clearly marked with this indicator.
Fast and Easy Selection
To change cross section, simply flip the
knob to desired setting.
To change tension within the range of the crosssection, turn knob clockwise (shown) to increase,
counterclockwise to decrease.
Part Number
Tool Tension Lock Kit
TTLK3-X
Description
Tool Tension Lock Kit
Each kit contains (1) #--40 selection locking screw (with head), (1) selection
locking clip, and (1) #4-40 tension locking screw (headless).
Pkg.
Qty.
10
Certain applications require a locking
device on either the selector knob (one
cross-section size and tension only) or
tension level adjustment (but allowing
cross-section size changes). This kit is
available for that purpose.
To lock selector knob and tension level
Repair Parts
Blade Replacement Kits
and Gripper Replacement
Kit
To lock fine adjustment
K2-BLD2
Blade Replacement Kit for GS2B (all versions) and PPTS
1
K4H-BLD
Blade Replacement Kit for GS4H (3-screw blade guard only)
1
KPPTEHB
KPPTEHG
Blade Replacement Kit for PPTEH
Gripper Replacement Kit for PPTEH
1
1
KPTSG
Gripper Replacement Kit for PPTS
1
GHH
Specifically designed to hold GS2B, GS4H (series) or PPTS tools.
Used wherever the hand tools are used—construction sites to assembly lines for
a convenient and handy place for the tool.
1
Can be part of a scheduled
maintenance plan or use only when
cutoffs are not clean and crisp.
Hand Tool Accessory
Holster
54
Hand-Operated Tools
Hand Operated
Tools
Installer-Controlled
Tension and Cut-Off
Panduit offers an economical series of tools for maintenance or
construction applications—the user determines the required cable tie
tension and the tools provide a cut-off. Used with the full line of PANDUIT
Cable Ties.
Part Number
STS2
Description
Installs PANDUIT Miniature, Intermediate or Standard cross section cable ties.
See STH2 operation below.
Pkg.
Qty.
1
Color Identification: Black
Weight: 2 1/2 oz. (71g)
STH2
Installs PANDUIT Standard, Light Heavy or Heavy cross section cable ties.
1
Color Identification: Red
Weight: 2 1/2 oz. (71g)
INSTALLATION PROCEDURE FOR
STS2 AND STH2 TOOLS
1. Install cable tie around bundle.
Tension tie by squeezing tool handle.
2. Reduce tension slightly and twist tool
1/4 turn either direction for cut-off of
cable tie.
• Inexpensive, maintenancefree, all purpose tools
• Ergonomic handle design
and short handle span
• Top loading feature for
right or left-handed users
ST2EH
Installs PANDUIT Light Heavy, Heavy or Extra Heavy cross section cable ties.
1
Color Identification: Black Handles
Weight: 16 oz. (454g)
After installing tie around bundle and
tensioning, tool is twisted a 1/4 turn “in either
direction” to cut off excess tie.
• Durable all steel construction
• Comfortable rubber handles
KST2EHG
Gripper Replacement Kit for ST2EH.
1
STHV
Installs PANDUIT Light Heavy and Heavy cross section cable ties.
Also installs SUPERFLEX ™ (SLT) cable ties.
1
Color Identification: All Yellow
Weight: 12 oz. (340g)
After installing tie around bundle, the handles
are squeezed to provide
tension. A separate lever cuts excess
tie.
• Durable all steel
construction
• “Travel stop” helps prevent
pinched fingers
55
Cable Tie Selection and Specification Guidelines
Selecting the Proper Cable Tie Material for Your Application
By using this information as a guide, the user will be better equipped to select the best suited cable tie and
material to perform its intended function over a long period of time.
For long life and dependable service, there are many factors to consider when selecting the proper cable tie
for each application. Since it is impossible for Panduit to provide data on all the various combinations of
conditions which may arise, it is suggested that this data be used as a guideline and that sample cable ties
be tested under actual end-use conditions to determine the correct cable tie for the application.
To select the optimum cable tie for a specific application, the following table can be used as a quick
reference. First, determine the most critical design criteria and then read across the table to find which
material is most suitable to meet this need (10 = Most Suitable and 1 = Least Suitable). Next, review the
other criteria by scanning in a vertical direction on the chart and then make your final selection.
Design Criteria
Part Number Suffix
Material Designation
-0
-30
-39
-300
-60
-69
-120
-109
-100
-76
-702
Loop Tensile Strength
7
7
7
7
7
7
7
6
5
5
7
5
10
Low Temperature Service
6
6
6
6
6
5
5
6
6
6
7
7
10
High Temperature Service
5
5
6
6
6
5
5
5
5
5
8
7
10
Flammability
6
6
6
6
6
8
8
3
2
2
9
9
10
Ultraviolet Resistance
1
6
4
1
6
1
1
7
1
6
9
9
10
Radiation Resistance
3
3
3
3
3
3
3
4
5
5
9
9
10
Overall Chemical Resistance
–Hydrocarbons
–Chlorinated Hydrocarbons
–Acids
–Bases
–Salts
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
8
9
8
6
7
8
8
6
5
9
9
10
8
6
5
9
9
10
10
10
10
10
10
10
10
10
10
10
10
10
9
10
10
10
8
9
Low
Low
Low
Low
Med.
Med.
Med.
Med.
Low
Low
High
High
High
Relative Price
Example No. 1:
Application
If your application requires high radiation (2 x 108 rads) resistance, excellent
resistance to hydrocarbons and the price is not critical.
Selection
Your best choice is TEFZEL or stainless steel. The price is higher than other
materials, but both have high ratings in resistance to radiation and hydrocarbons.
Example No. 2:
Application
Selection
If your application requires a low cost material, good ultraviolet resistance and good Your best choice is weather-resistant polpropylene which is less expensive, 6
resistance to acid rains.
rating in ultraviolet resistance and 9 rating on resistance to acids.
56
▲HALAR is the Registered Trademark for Ausimont Inc. fluoropolymer
See Table C for chemical resistance of 304 & 316 stainless steel.
„ TEFZEL is the Registered Trademark of E. I. DuPont Co., fluoropolymer
See Table C for chemical resistance of 304 & 316 stainless steel.
Material Selection Guide
To select the proper cable tie for your application, start at the left
of the chart and answer the “Yes” and “No” questions until you
arrive at the correct material to use.
Suggested Material to use
No—Nylon 6.6
No
No
Does material
need to resist
high heat?
Yes
Does material need to
be resistant to
chemicals
(salt/acids)?
No
Yes
Does material
need to be flame
retardant?
Yes—Flame Retardant Nylon 6.6 (-69)
Does material
need to be flame
retardant?
Yes—Contact Factory
Does material
need to be flame
retardant?
Does material
need to resist
high heat?
No
Yes
No—Heat Stabilized Nylon 6.6 (-30)
No—Natural Polypropylene (-109)
Yes—Contact Factory
No—Contact Factory
Does material
need to be flame
retardant?
Yes—Contact Factory
START
Does material
need to be
UV resistant?
Yes
No
No
Does material
need to resist
high heat?
Yes
Does material need
to be resistant
to chemicals
(salt/acids)?
No—Weather Resistant
Nylon (-0) (-00)
Yes—Contact Factory
Does material
need to be flame
retardant?
No—Weather Resistant Heat
Stabilized Nylon 6.6 (-300)
Yes—Contact Factory
No
Yes
Does material
need to be flame
retardant?
Does material
need to be flame
retardant?
Does material
need to resist
high heat?
Yes
▲ HALAR is the Registered Trademark for Ausimont Inc. fluoropolymer
No—Weather Resistant
Polypropylene (-100)
or Nylon 12 (-120)
Yes—Contact Factory
Does material
need to be flame
retardant?
No—Contact Factory
Yes—Stainless Steel
or TEFZEL■ (-76)
or HALAR▲ (-702)
„ TEFZEL is the Registered Trademark of E. I. DuPont Co., fluoropolymer
57
Weathering
Weathering
Ultraviolet light (which is a component of sunlight) attacks, over a period of time,
most plastic materials and reduces their properties by breaking the molecular
chain. The material breakdown is accompanied by reductions in tensile strength
and elongation, increased brittleness, color changes and loss of surface gloss.
Carbon black, which is used in PANDUIT ® nylon and polypropylene cable ties,
is one of the most effective stabilizers known today. A uniform dispersion of carbon black provides good ultraviolet light resistance without adversely affecting
physical properties. The addition of carbon black, or any other ultraviolet light stabilizer, prolongs the useful life of plastic products used outdoors, but it does not totally eliminate the
destructive effects of the light. Some plastics, such as TEFZEL„ or HALAR▲, are intrinsically very resistant to ultraviolet light and do not require stabilizing additives.
Weathering Test Methods
In order to monitor the effects of ultraviolet light and the effectiveness of ultraviolet stabilizers, Panduit, in
conformance with industry standards, adopted two methods of weatherability testing: Outdoor Aging and
Accelerated Weather Aging.
Outdoor Aging
The Outdoor Aging method is probably the best and most realistic method of the two. It is conducted in
accordance with ASTM D1435-85 Recommended Practice for Outdoor Weathering of Plastics, and
allows the material to be affected by not only ultraviolet light, but by all other outdoor elements as well.
Although this may more closely approximate an actual application, two drawbacks do exist. The period
of time required to produce property decay and material failure may be quite long and varying adverse
chemical environments cannot be tested.
Accelerated Weather Aging
Accelerated weathering tests have been used in order to increase the rate of degradation due to a combination of ultraviolet light, temperature and moisture. The methods used are in accordance with the following standards:
• ASTM D1499-84, Operating Light and Water Exposure Apparatus (Carbon-Arc type) for exposure to plastics
• ASTM G53-84, Operating Light and Water Exposure (Fluorescent U.V. Condensation type) for exposure of
non-metallic materials
The condition specified in ASTM D1499-84 utilizes a carbon arc to simulate natural sunshine and a water
spray. The test chamber is operated 20 hrs/day with a two hour cycle of 108 minutes of simulated
sunshine and 12 minutes of sunshine and water spray. The temperature of a black body inside the
chamber is approximately 63°C (145°F) during the “Sunshine Only” portion of the cycle. Humidity is not
controlled inside the chamber.
The test chamber per ASTM D53-84 uses fluorescent sun lamps to generate ultraviolet light only. A
heated water pan produces condensation during a portion of the cycle.The daily cycle is composed of 20
hours of light followed by 4 hours of condensation. Black body temperatures during the light cycle are
50°C (122°F) and 40°C (104°F) during the condensation cycle.
Panduit has also designed a special chamber which is used to simulate the effect of acid rain and
ultraviolet light on cable tie materials. The effect of other common chemicals, such as road salt, are also
evaluated in this chamber.
These methods are effective in quickly determining the ultraviolet light resistance of the various cable tie
materials, but it must be emphasized that there are no exact correlations between accelerated aging and
actual outdoor exposure.
58
▲ HALAR is the Registered Trademark for Ausimont Inc. fluoropolymer
„ TEFZEL is the Registered Trademark of E. I. DuPont Co., fluoropolymer
Weathering
Material Failure Testing
Property decay can lead to three different modes of failure: loss of strength, loss of toughness or change in
appearance. The critical mode for any given application would depend upon the application and the
requirements it places upon the material itself.
Loss of strength is monitored by tensile testing samples of the material before and after it has been
weathered. This test will reveal the decreasing strength accompanied by extended weathering.
Loss of toughness can be monitored by measuring changes in elongation and impact strength. As
ultraviolet light exposure time increases and the material becomes brittle, its elongation and impact strength
are greatly reduced. It is important to note that brittle failures can occur even when the tensile strength
shows no change.
Although change in appearance is normally not a failure mode for cable ties, the plastic does tend to discolor
and lose its surface gloss as exposure increases. These changes can be measured by color difference using
Adams units which are similar to National Bureau of Standard units.
Panduit has its own weathering test program to determine estimated life of various cable tie materials.This
includes examining many previously aged samples obtained throughout the world.
In all cases, the amount of property decay increased with increasing exposure to ultraviolet light. The
principal signs of degradation were found to be brittleness, cracking and loss of surface gloss. It was also
determined that the time for failure to occur was shorter than indicated from industry tests performed on
material samples. This discrepancy is in part due to the fact that cable ties were tested in an end use,
stressed condition, while most plastic resin suppliers conduct weathering tests using unstressed test bars.
Three cable tie materials (TEFZEL„, HALAR▲ and stainless steel) have superior ultraviolet light resistance.
In tests conducted to date, both have shown no significant signs of degradation.
Determining the outdoor life expectancy of any material is difficult since there are other factors, besides
ultraviolet light stability, which have to be considered. These factors are listed below and should be
considered before specifying a cable tie material.
Table A - External Factors Which Affect the Life of a Cable Tie
FACTORS
Chemicals
DECREASED LIFE
WEATHERING LIFE EXPECTANCY
Applications which have chemicals present can reduce the life. This is
the most detrimental factor to the life of a tie.
Bundle
Diameter
As the bundle diameter is reduced, the tie has more bending stress.
A thick strap on small diameter has more stress.
Loading
If the tie is under high loading, this will add additional stress on the tie
body.
Thickness
Vibration
Degree of
Exposure
Moisture
Galvanized
Metals
Materials (P/N Suffix)
Natural Polypropylene (-109)
Years*
1
Natural 6.6 Nylon
1-2
Flame Retardant Black 6.6 Nylon (-60)
1-2
Flame Retardant 6.6 Nylon (-69)
1-2
A thinner tie will have a decreased life since surface cracks will
penetrate the thickness of the tie faster.
Heat Stabilized 6.6 Nylon (-30)
4-5
Heat Stabilized Natural 6.6 Nylon (-39)
1-2
Applications with high vibrations will cause impact which will propagate any surface cracks.
Weather Resistant 6.6 Nylon (-0 & -00)
7-9
No shield or shade, southern exposure, higher altitudes and high
temperatures decrease the life of the cable tie.
Heat Stabilized Weather Resistant 6.6 Nylon (-300)
7-9
Weather Resistant Polypropylene (-100)
Dry environments cause nylon 6.6 ties to become more brittle. High
humidity plus high temperatures can result in degradation due to
hydrolysis in nylon.
Weather Resistant Nylon 12 (-120)
Acid rain and acid moisture acting on galvanized metals release
chemicals known to attack nylon 6.6.
7-9
12-15
TEFZEL (-76)
>15
HALAR (-702)
>15
Stainless Steel (MLT prefix)
>30
*Based on assumption of minimum loading, no chemical
al attack and
impact-free conditions.
▲ HALAR is the Registered Trademark for Ausimont Inc. fluoropolymer
„ TEFZEL is the Registered Trademark of E. I. DuPont Co., fluoropolymer
59
Flammability
Flammability
A number of test procedures have been developed which can be used for the
evaluation and comparison of various materials to support combustion.
UL94 Vertical Burning Test
Samples of a material, with dimensions 127mm by 12.7mm and the thickness
of the intended end use product, are tested in an unaged “as manufactured”
state and in an aged state (7 days at 158 °F, 70°C). The test requires the placement of a precisely controlled flame under a vertically supported specimen for a
10 second period. The flame is removed and the duration of flaming is
recorded. If the flame extinguishes, the specimen is immediately subjected to a
second 10 second ignition period. Duration of flaming is again recorded. A piece of surgical cotton is
placed under the specimen. If drips ignite the cotton, this fact is also recorded.
Materials Classed 94V-0
Materials classed 94V-0 shall:
• Not have any specimens which burn with flaming combustion for more than 10 seconds after either application of
the test flame
• Not have a total flaming combustion time exceeding 50 seconds for the 10 flame applications for each set of five
specimens.
• Not have any specimens which burn with flaming or glowing combustion up to the holding clamp.
• Not have any specimens which drip flaming particles that ignite the dry absorbent surgical cotton located 12"
(305mm) below the test specimen.
• Not have any specimens with glowing combustion which persists for more than 30 seconds after the second
removal of the test flame.
Materials Classed 94V-1
Materials classed 94V-1 shall:
• Not have any specimens which burn with flaming combustion for more than 30 seconds after either application of
the test flame.
• Not have a total flaming combustion time exceeding 250 seconds for the 10 flame applications for each set of five
specimens.
• Not have any specimens which burn with flaming or glowing combustion up to the holding clamp.
• Not have any specimens which drip flaming particles that ignite the dry absorbent surgical cotton located 12"
(305mm) below the test specimen.
• Not have any specimens with glowing combustion which persists for more than 60 seconds after the second
removal of the test flame.
Materials Classed 94V-2
• Not have any specimens which burn with flaming combustion for more than 30 seconds after either application of
the test flame
• Not have a total flaming combustion time exceeding 250 seconds for the 10 flame applications for each set of five
specimens.
• Not have any specimens which burn with flaming or glowing combustion up to the holding clamp.
• Be permitted to have specimens that drip flaming particles which burn only briefly, some of which ignite the dry
absorbent surgical cotton placed 12" (305mm) below the test specimen.
• Not have any specimens with glowing combustion which persists for more than 60 seconds after the second
removal of the test flame.
60
Flammability
ASTM D 635
Samples of a material, with dimensions 125mm by 12.5mm and the thickness of the intended end use
product, are tested in an unaged “as manufactured” state. A precisely controlled flame is applied to the
specimen and a stopwatch is started. The flame is applied for 30 seconds. The stopwatch is stopped when
burning or glowing combustion ceases or when the flame has proceeded to a mark 100mm from the free
end. Ten specimens are tested.
• Burning Rate
• If two or more specimens have burned to the 100mm mark then Average Burning Rate (cm/min) shall be reported
as the average of the burning rates of all specimens which have burned to the 100mm mark.
• Average Time of Burning and Average Extent of Burning
• Average time of burning and average extent of burning of the sample shall be reported if none of ten samples or no
more than one of twenty specimens have burned to the 100mm mark.
• Average Time of Burning (ATB):
• Average Extent of Burning (AEB):
10
ATB,s =
∑0
( t – 30s )
Number of Specimens
Rounded to the nearest 5 sec.
(100 – unburned length)
∑ kjfdsjfs
0
10
AEB,mm =
Number of Specimens
Rounded to the nearest 5mm
Flammability Ratings
Materials
UL94
ASTM D635
Natural 6.6 Nylon
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Weather Resistant 6.6 Nylon (-00)
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Weather Resistant 6.6 Nylon (-0)**
94V-2 (1/16")
AEB = 20mm**
ATB = 5 seconds**
Heat Stabilized 6.6 Nylon (-30)
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Heat Stabilized Natural 6.6 Nylon (-39)
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Heat Stabilized Weather Resistant 6.6 Nylon (-300)
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Flame Retardant Black 6.6 Nylon (-60)
94V-0 (1/64")
AEB =15mm
ATB < 5 seconds
Flame Retardant 6.6 Nylon (-69)
94V-0 (1/64")
AEB = 15mm
ATB < 5 seconds
Weather Resistant Nylon 12 (-120)
Not Recognized
Ave. Burning Rate
1.6cm/min.
Natural Polypropylene (-109)
Not Recognized
Ave. Burning Rate
2 cm/min.
Weather Resistant Polypropylene (-100)
Not Recognized
Ave. Burning Rate
2 cm/min.
TEFZEL„ (-76)
94V-0(1/16")
AEB < 15mm
ATB < 5 seconds
HALAR▲ (-702)
94V-0(1/16")
AEB = 15 min.
ATB < 5 seconds*
Not Applicable
Not Applicable
Stainless (MLT prefix)
*Rating based on 1/8" thick test samples.
**Consult factory for specific tie sizes.
▲ HALAR is the Registered Trademark for Ausimont Inc. fluoropolymer
„ TEFZEL is the Registered Trademark of E. I. DuPont Co., fluoropolymer
61
Radiation/Moisture/Temperature/Tensile Strength
Radiation
Installed cable ties of various materials have been exposed to different amounts
of radiation to determine the maximum acceptable limit. These tests were
conducted by Panduit mainly to determine the acceptability for use in various
areas of nuclear power plants (accumulated over 40 year life). See Table B for
radiation resistance rating.
Moisture
Many plastics when exposed to high relative humidity absorb water and, as such,
the tensile strength of the material can change dramatically. Nylon 6.6 when
exposed to 100% relative humidity, will absorb as much as 8.5% water which will
reduce tensile strength by 50% when compared to a dry cable tie. Polypropylene,
HALAR▲ , Type 12 Nylon, and TEFZEL„ are low water absorbing materials and,
as such, the effect of water is minimal. See Table B for moisture absorption.
Temperature
Plastic materials normally undergo property loss during exposure to high
temperature due to oxidation. The maximum temperature for successful service
depends upon the material used as well as environmental conditions. Initially,
plastics become more flexible and weaker when exposed to high temperatures.
After a period of time, oxidation may occur which will cause embrittlement,
making plastic cable ties more susceptible to failure from impact and vibration.
Low temperature exposure will also make most plastics more brittle during this
exposure, but little property loss occurs when the material is returned to room
temperatures. The minimum continuous use temperature after installation is
stated in Table B.
Tensile Strength
Most cable ties are selected based on material, length and minimum loop tensile
strength. Minimum loop tensile strength was established under Military
Specification MIL-S-23190. Each cross section cable tie (Miniature-M,
Intermediate-I, Standard-S, Heavy-H and Extra Heavy-EH) has a different loop
tensile strength when testing per MIL-S-23190.
The cable tie is first conditioned at 49°C (120°F), 20% relative humidity for 24
hours, then the cable tie is installed on a split mandrel and the halves of the
mandrel separated at a rate of 1" (25.4mm) per minute (Fig.1). The separating
force required to unlock or break the cable tie is the loop tensile strength. Loop
tensile strength is dependent both on the locking design and the tensile strength
(psi) of the material. As an example, the tensile strength of polypropylene
material is approximately 1/2 to 1/3 of nylon 6.6; thus the loop tensile strength of
a given cross section tie made of polypropylene would be much less than a tie
made of nylon 6.6. This is another property to be considered when selecting a
cable tie. The various representative loop tensile strengths are listed in Table B.
62
▲ HALAR is the Registered Trademark for Ausimont Inc. fluoropolymer
Fig. 1
„ TEFZEL is the Registered Trademark of E. I. DuPont Co., fluoropolymer
Physical Characteristics of Cable Tie Materials
Table B — Physical Characteristics of Various Cable Tie Materials
Design Criteria
Tensile Strength
73°F (psi)
12,0001
12,0001
12,0001
12,0001
12,0001
12,0001
12,0001
8,1001
4,1001
4,1001
7,5001
7,0001
90,0002
Color
Natural
Black
Black
Natural
Black
Black
Ivory
Black
Green
Black
Aqua
Maroon
Stainless
28
28
26
26
26
34
34
NA
NA
NA
30
60
NA
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
3.5 x 106
Rads
1 x 106
Rads
1 x 106
Rads
2 x 10 8
Rads
2 x 108
Rads
2 x 108
Rads
Water Absorption
(24 hours)
1.2%
1.2%
1.2%
1.2%
1.2%
1.1%
1.1%
0.3%
0.1%
0.1%
Ultraviolet Light Resistance
Poor
Good
Fair
Poor
Good
Poor
Poor
Good
Poor
Good
Max. Continuous Use
Temperature
185°F
85°C
185°F
85°C
221°F
105°C
221°F
105°C
205°F3
96 °C
221°F
105 °C
221°F
105 °C
176 °F
80 °C
185 °F
85 °C
185 °F
85°C
302°F 6
150 °C
284 °F7
140 °C
1000°F 5
537 °C
Min. Continuous Use
Temperature 4
-40 °F
-40°C
-40 °F
-40°C
-40 °F
-40°C
-40 °F
-40°C
-40 °F
-40°C
-40 °F
-40°C
-40 °F
-40°C
-40°F
-40°C
-40°F
-40°C
-40°F
-40°C
-50°F
-46°C
-50°F
-46°C
-112°F
-80°C
N/A
18 lb.
30 lb.
N/A
18 lb.
30 lb.
N/A
18 lb.
40 lb.
N/A
N/A
25 lb.
N/A
12 lb.
N/A
N/A
12 lb.
N/A
N/A
18 lb.
25 lb.
N/A
18 lb.
N/A
N/A
N/A
N/A
50 lb.
120 lb.
50 lb.
120 lb.
50 lb.
120 lb.
40 lb.
90 lb.
30 lb.
50 lb.
30 lb.
50 lb.
50 lb.
120 lb.
65 lb.
N/A
100 lb.
250 lb.
N/A
N/A
N/A
N/A
90 lb.
90 lb.
N/A
N/A
N/A
600 lb.
GS4MT
ST2MT
PPTMT
HTMT
UL Flammability
Oxygen Index
Radiation Resistance
Submin.>
Min.>
Int.>
Minimum
Loop Tensile
Std.>
Strength
Hvy.>
@120 °F;
20% RH
EH>
DH
Tool Installed
Part Number Suffix/
Material Designation
See Page 62
12 lb.
12 lb.
N/A
N/A
18 lb.
18 lb.
18 lb.
18 lb.
30/40
30/40
30/40
30/40
lb.
lb.
lb.
lb.
50 lb.
50 lb.
50 lb.
50 lb.
120/175 120/175 120/175 120/175
lb.
lb.
lb.
lb.
250 lb. 250 lb. 250 lb. 250 lb.
GS2B
GS2B
GS2BL GS2BL
GS4H
GS4H
GS4EH GS4EH
STS2
STS2
STH2
STH2
ST2EH ST2EH
STHV
STHV
PPTS
PPTS
PPTEH PPTEH
None
-0 and
-00