Cable Ties/Wiring Accessories Catalog—WW-CTCB03
(replaces SA-101N275C-WC)
Table of Contents
Cable Ties and Installation Tooling
Available Styles
PAN-TY ® Locking Cable Ties, Locking Lashing Ties, Releasable Ties, Releasable Lashing Ties,
Clamp Ties, Marker and Flag Ties, Winged Push Mount Ties, Push Mount Ties,
Weather Resistant Ties, Polypropylene Ties, Flame Retardant Ties, Nylon 12 Ties, HALAR* Ties,
TEFZEL ** Ties, Fluorescent Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26
DOME-TOP ® Barb Ty Cable Ties, Clamp Ties, Marker Ties, DURA-TY ™ WR Cable Ties,
Heat Stabilized Ties, Winged Push Mount Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-35
Parallel Entry (CONTOUR-TY ® Cable Ties, BELT -TY ™ IN-LINE Cable Ties, IN-LINE Cable Ties) . . . . . . . 36-39
Hook & Loop Cable Ties (TAK -TY ® Hook & Loop Cable Ties, Hook & Loop Strips/Rolls) . . . . . . . . . . . . 40-42
S TA -STRAP ® Clamp Ties, Cable Ties, Chassis/Panel Mount Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-45
Specialty Ties (Stud Mounted Heat Stabilized, Releaseable Stud Mounted “Ladder” Cable Ties,
Multiple Loop, Double Hose Clamp, Polyethylene Marker Strap) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-50
P AN -P OUCH ™ Telephone Cable Identification Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Cable Tie Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Cable Tie Installation Tools (manual/pneumatic/automatic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-61
Available Materials
Nylon 6.6 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13, 28, 30-33, 36-38, 43, 47
Heat Stabilized Nylon 6.6 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 30, 44, 46
Weather Resistant Nylon 6.6 Cable Ties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-18, 29, 31, 36, 38, 47, 48
Polypropylene Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19
Flame Retardant Nylon 6.6 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Weather Resistant Nylon 12 Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
HALAR* and TEFZEL** Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Fluorescent Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Weather Resistant Acetal Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Hook & Loop Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-42
Polyethylene Marker Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Additional Information
Lashing Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8, 15, 16
Military Cross Reference Aerospace Standard Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Custom Hot Stamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Selecting the Proper Cable Tie Material for Your Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Material Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Weathering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65
Flammability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66-67
Radiation/Moisture/Temperature/Tensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Physical Characteristics of Cable Tie Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Chemical Resistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-74
Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-76
Stainless Steel Tie Products
PAN-STEEL ® Stainless Steel Tie . . . . . . . . . . . . . . . . .
WAVE -TY ™ Superior Grip Standard Steel Tie. . . . . . . .
Stainless Steel Tie Installation Tools . . . . . . . . . . . . .
Metal Marker Plates/Tags/Marking Devices . . . . . . .
Stainless Steel Strapping . . . . . . . . . . . . . . . . . . . . . .
.........
.........
.........
.........
.........
........
........
........
........
........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
. . . . . . . 77
. . . . . . . 77
. . . . . . . 78
. . . . . . . 78
. . . . . . . 80
Wiring Accessories
Cable Tie Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-107
Wiring Accessories — used without cable ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108-123
Harness Board Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124-129
Communication Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130-133
Selection and Use of Adhesive Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134-136
Abrasion Protection Products (Heat Shrink, Non-Shrink PVC Tubing,
Spiral Wrap, Grommet Edging and Braided Expandable Sleeving) . . . . . . . . . . . . . . . . . . . . . . . . . 139-181
*HALAR is a registered trademark of Solvay Solexis, Inc.
** TEFZEL is a registered trademark of E.I. DuPont de Nemours Co.
All reference dimensions in this catalog are shown in inches (and millimeters).
1
World Leader in Cable Ties and Wiring Accessories
PANDUIT ® is a leading global producer of cable ties and wiring accessories, offering the
most complete selection of sizes, styles and materials. We continually provide new cable
tie and wiring accessory designs to meet the changing application challenges encountered
by our customers while providing lowest installed costs.
PANDUIT ® also offers the largest selection of ergonomic cable tie installation tools —
from high speed automatic systems to hand operated tools. So, whatever the need,
PANDUIT ® has the tool to help lower your total installed cost.
Assured Quality
ISO 9001
To help assure optimum quality, PANDUIT ® products are designed
and manufactured to meet applicable international, UL, military and customer standards:
The International Standards Organization (ISO) establishes worldwide standards for products and
services in recognition of increasing globalization of markets. The ISO program sets up the requirements
for quality assurance systems of these worldwide standards. PANDUIT ® is registered to ISO 9001, the
most comprehensive model in the standard, meant for companies who design, manufacture, install and
service the products they sell. Registration has been awarded by Underwriters Laboratories (Certificate
No. A2269) after extensive audit of QA systems employed at PANDUIT ®.
QS-9000 is the shorthand name for “Quality System Requirements QS-9000.” It is the common
supplier quality standard for the automotive industry. QS-9000 is based on the 1994 edition of
ISO 9001, but it contains additional requirements that are particular to the automotive industry.
These additions are considered automotive “interpretations” by the ISO community of accreditation
bodies and registrars. Registration has been awarded by Underwriters Laboratories Inc.
(Certificate No. A2269) for PANDUIT ® cable ties.
QS-9000
ISO14001 is a voluntary standard for Environmental Management Systems established by the
International Organization for Standardization. The international standard provides a benchmark for
continual improvement in environmental performance. Business partners can be confident that the
PANDUIT ® manufacturing facilities around the globe are engaged in an on-going process to maximize
value while minimizing impact on global natural resources.
ISO14001
Underwriters Laboratories, Inc. (File E56854)
Most PANDUIT ® miniature, intermediate, standard, light-heavy and heavy cross-section ties are
Recognized (ZODZ(8)) or Listed in the US and Canada by Underwriters Laboratories (ZODZ(7)) in their
Directory under the category “Wire Positioning Devices.” Natural, pigmented and weather resistant
cable ties are recognized for indoor use at temperatures up to 85 °C (185°F). Weather resistant cable
ties are also UL Listed for outdoor applications. Heat stabilized ties are UL Recognized and Listed for
indoor use at temperatures up to 115°C (239°F).
Aerospace Standard AS23190
Aerospace Standard SAE spec AS23190 covers the actual test requirements on cable ties. PANDUIT ®
cable ties, when tested, either meet or exceed the requirements of this specification.
Nuclear Regulatory
Commission
The NRC developed rules and regulations concerning Quality Assurance Criteria for Nuclear Power
Plants or Title 10, Chapter 10, Part 50, Appendix B (10CFR50). PANDUIT ® Corp. Quality Assurance
program is designed to satisfy the 18 criteria set forth in NRC 10CFR50, Appendix B, Military
Specification AS23190.
Ford Motor Company
PANDUIT ® has received Q1 certification status from Ford Motor Company. Q1 certification enables all
PANDUIT ® cable tie manufacturing facilities to approve all initial samples and production shipments of
the parts destined for Ford operations throughout the world.
International Approvals Independent Testing Facilities
K
German (VG)
Military
2
Lloyd’s Register of
Shipping
RINA
Most commonly used parts appear in BOLD.
Germanischer
Lloyd
Nippon Kaiji
Kyokai
Det Norske
Veritas
Bureau Veritas
R
Korean Register
of Shipping
Everywhere you need us!
Styles of Cable Ties
Selection Guide
PAN-TY ® Cable Ties
DOME-TOP ® Barb Ty Cable Ties
This line offers the largest selection of styles,
materials, and sizes. The ties are available in
nylon 6.6, nylon 12, polypropylene, HALAR*
and TEFZEL** material. Available in sizes from
.60" (15mm) maximum bundle diameter up to
13" (330mm) maximum bundle diameter.
All are self-locking and many sizes are
available in both releasable and non-releasable
types. PAN -TY ® Cable Ties are quickly installed
by hand or with PANDUIT ® installation tools.
These cable ties provide consistent performance
and reliability for those users who prefer a cable tie
with a stainless steel locking barb. They are infinitely
adjustable through their entire bundle range. On
selected popular sizes, the additional length of
DOME -TOP ® Barb Ty Cable Ties provides an
average of 30% more bundle area than other metal
barb cable ties. Available in sizes from .90" (23mm)
maximum bundle diameter up to 9.0" (229mm)
maximum bundle diameter and may be installed by
hand or with PANDUIT ® installation tools.
DURA-TY ™ Cable Ties
Parallel Entry Cable Ties
DURA -TY ™ is a heavy-duty cable tie that is
ideal for all outdoor applications requiring
high strength and longer life. The acetal
strap and head provides excellent UV
light resistance and high tensile strength.
The smooth, rounded edges on the head
and body do not irritate the hands. The
ties are easy to install. Available in
standard lengths or dispenser rolls for
easy, cut to length convenience in custom
applications.
Parallel Entry Ties are comprised of the
CONTOUR -TY ®, BELT-TY ™ and IN-LINE Cable Tie
families. CONTOUR -TY ® Cable Tie’s fully enclosed
locking wedge insures consistent strength, lasting
performance and it is available in a new heavystandard cross section. BELT-TY ™ Cable Ties have
low profile heads which help avoid snags and
reduce overall bundle size. IN-LINE Cable Ties are
exceptional for applications that require conformity
to large bundles. Unique IN-LINE design forms
completely around the bundle, increasing the
contact area. Serrations on the side of the head
assure positive grip during threading of the tie and
increases installation speed.
*HALAR is a registered trademark of Solvay Solexis, Inc.
** TEFZEL is a registered trademark of E.I. DuPont de Nemours Co.
Most commonly used parts appear in BOLD.
3
Styles of Cable Ties
Selection Guide (cont.)
TAK-TY ® Hook & Loop Cable Ties
STA-S TRAP ® Cable Ties
PANDUIT ® TAK-TY ® Hook & Loop Cable Ties
are ideal for applications that require
frequent cabling moves, adds and changes.
They can be used to secure a wide variety
of various sizes of cable bundles. Wide color
choice allows for quick and easy color
coding of separate cable bundles.
STA-STRAP ® Cable Ties offer several unique
features. Harness modifications during
assembly are made easy as the two-piece
design affords releasability prior to final
tensioning and cut-off. The ties are extremely
flexible and lightweight. They also provide
the lowest thread force in the industry which
reduces operator fatigue. The unique design
allows this cable tie to secure a bundle
directly to a panel without the need for
additional fasteners or mounting devices and
reduces installation costs.
Specialty Ties
Stainless Steel Ties and Strapping
PANDUIT ® continually develops new
products to help solve the unique
application problems of our customers.
One of these products is the polyethylene
cable marker strap that is used for
identifying telephone and fiber optic cable,
which typifies the design/manufacturing
capability of PANDUIT ® to respond to
these special needs.
Underground, underwater, indoors,
outdoors — however hostile the
environment — PANDUIT ® Stainless Steel
Ties and Strapping fasten and identify
components and cables quickly and easily.
Stainless steel ties stand up to most
chemicals, to nuclear and ultraviolet
radiation, to seawater and direct burial in
any soil, and to temperature extremes from
-112°F to 1700°F (-80°C to 925°C).
4
Most commonly used parts appear in BOLD.
PAN -TY ® Cable Ties
PAN-TY ® Cable Tie Features/Benefits:
1. One Piece Construction
2. Smooth, Round Edges
3. Tensile Strength
• Consistent performance
and reliability
• Available in lengths from 2.8"
(71mm) up to 43.3"
(1100mm) to meet a variety
of application requirements
• No irritation to installer’s hands,
increases productivity
• Prevents damage to
wire insulation
• Exceeds Industry and
Aerospace Standards
SAE (AS23190) standards
• Available in seven loop tensile
strengths from 8 lbs. (36N) up
to 250 lbs. (1112N) to provide
an economical selection
4. Curved Tip
5. Finger Tip Grip
6. More Teeth Per Inch
• Orients tip toward head to
speed installation — lowers
installed cost
• Faster initial threading
• Easier to pick up from
flat surfaces
• Finger tip grip on selected
sizes assures positive grip
during threading of the tie
• Grip prevents tip from
slipping out of cable tie head
during threading
• Greater number of small
uniform teeth provides
tighter bundles
• Because they are flush with
surface they provide proper
wire bundle grip without wire
insulation damage
7. Low Threading Force
8. One Piece Locking Design
9. Material Availability
• Lowest threading force of
any one piece cable tie in
the industry
• Reduces operator fatigue
• Thin tapered tip facilitates
threading, easier
initial insertion
• Multiple locking tooth design
provides greater strength
and reliability
• Available in self locking or
releasable styles for use in
applications where changes
are anticipated
• Available in a variety of
materials to meet the needs
of special environments
• Properly selected ties can be
used indoors or outdoors
with assurance of long
lasting performance
Most commonly used parts appear in BOLD.
5
Nylon 6.6 Locking Cable Ties (PLT Series)
PAN-TY ® Nylon 6.6
Locking Cable Ties —
Curved Tip
These versatile fasteners can be used in countless applications
wherever you need to bundle wire, cable, or hose. They tie bundle
diameters up to 13" (330mm), they also can be joined together for
even larger diameters. They have a minimum loop tensile strength
from 8 lbs. (36N) to 250 lbs. (1112N). Colors are available for
specific color-coding applications (see pages 24-26).
B
E
A REF.
Except PLT.6SM-C
C
D
CURVED TIP
Cable Ties for Automatic
Tools See Page 61.
SUBMINIATURE AND MINIATURE CROSS SECTION
Part
Number
Length
Width
A
B
in. (mm) in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
.125
(3.2)
.60
(15)
8
(36)
GTS, PTS
100
1000
1000
50000
100
1000
1000
50000
100
1000
1000
50000
100
1000
1000
50000
2.00
(51)
100
1000
1000
25000
1.38
(35)
100
1000
1000
25000
2.00
(51)
100
1000
1000
25000
100
1000
1000
10000
3.00
(76)
100
1000
1000
10000
4.00
(102)
100
1000
1000
10000
1.00
(25)
100
1000
1000
25000
1.50
(38)
100
1000
1000
25000
1.88
(48)
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
4.00
(102)
100
1000
1000
5000
PLT.6SM-C
2.8
(71)
.070
(1.8)
.030
(.8)
.095
(2.4)
PLT.7M-C
3.1
(79)
.090
(2.3)
.032
(.8)
.115
(2.9)
PLT1M-C
3.9
(99)
PLT1.5M-C
5.6
(142)
PLT2M-C
8.0
(203)
.098
(2.5)
Packaging*
Thickness
C
in. (mm)
.043
(1.1)
.154
(3.9)
.68
(17)
.180
(4.6)
.87
(22)
1.25
(32)
18
(80)
GTS, GS2B, PTS,
PPTS or STS2
INTERMEDIATE CROSS SECTION
PLT1.5I-C
5.6
(142)
PLT2I-C
8.0
(203)
PLT2.5I-C
9.7
(246)
PLT3I-C
11.4
(290)
PLT4I-C
14.5
(368)
.142
(3.6)
.045
(1.1)
.240
(6.1)
2.50
(64)
.180
(4.6)
.145
(3.7)
.052
(1.3)
.260
(6.6)
40
(178)
GTS, GS2B, PTS,
PPTS or STS2
STANDARD CROSS SECTION
6
PLT1S-C
4.8
(122)
PLT1.5S-C
6.2
(157)
PLT2S-C
7.4
(188)
PLT2.5S-C
9.8
(249)
.316
(8.0)
.190
(4.8)
.052
(1.3)
2.50
(64)
.220
(5.6)
50
(222)
GTS, GS2B, GTH,
GS4H, PTS,
PPTS, STS2
or STH2
PLT3S-C
11.5
(292)
PLT4S-C
14.5
(368)
PLT4.5S-C
15.5
(394)
4.50
(114)
100
1000
1000
5000
PLT5S-C
17.5
(445)
5.00
(127)
100
500
1000
5000
Most commonly used parts appear in BOLD.
3.00
(76)
.337
(8.6)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
Nylon 6.6 Locking Cable Ties (PLT Series)
Light-Heavy and
Heavy Cross Section
B
E
A REF.
C
D
Part
Number
Length
Width
A
B
in. (mm) in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
STRAIGHT TIP
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Except PLT5H, 6H,
8H and 13H
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
50
500
100
2000
50
500
100
2000
50
500
100
2000
50
500
100
1000
LIGHT-HEAVY CROSS SECTION
PLT6LH-L
21.9
(556)
6.00
(152)
PLT7LH-L
24.7
(627)
7.00
(178)
PLT8LH-L
27.6
(701)
PLT9LH-L
30.5
(775)
9.00
(229)
PLT10LH-L
34.3
(871)
10.31
(262)
50
1000
100
1000
2.00
(51)
50
500
250
2500
50
500
250
2500
50
500
250
2500
50
500
250
2500
50
500
100
2500
50
500
100
2000
50
500
100
1000
25
500
100
500
.300
(7.6)
.075
(1.9)
.325
(8.3)
.480
(12.2)
8.00
(203)
GTH, GS4H,
GS4EH
PPTEH, ST2EH
or STH2
120
(534)
HEAVY CROSS SECTION
PLT2H-L
8.1
(206)
PLT2.5H-L
9.8
(251)
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
2.50
(64)
PLT3H-L
11.4
(290)
PLT4H-L
14.5
(368)
4.00
(102)
PLT5H-L
17.7
(450)
5.00
(127)
PLT6H-L
20.9
(530)
PLT8H-L
30.6
(779)
PLT13H-Q
43.3
(1100)
.350
(8.9)
.078
(2.0)
.340
(8.6)
.560
(14.2)
120
(534)
3.00
(76)
GTH, GS4H,
GS4EH
PPTEH, ST2EH
or STH2
6.00
(152)
175
(778)
9.00
(229)
13.00
(330)
Lashing Ties typically are used on heavy duty jobs such as
securing conduit or large cable bundles to permanent structures,
indoors or out. Can be used with MCEH mounting clip
(see page 16).
PAN-TY ® Locking
Lashing Ties
E
B
PANDUIT
A REF.
C
D
Part Number
Length
Width
A
B
in. (mm) in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
2.00
(51)
—
—
100
1000
5.00
(127)
25
250
100
1000
25
250
100
1000
—
—
100
1000
10.00
(254)
—
—
100
500
12.00
(305)
—
—
100
500
EXTRA-HEAVY CROSS SECTION
PLT2EH-C‡
9.0
(229)
PLT5EH-Q!
20.1
(511)
PLT6EH-Q!
22.2
(564)
PLT8EH-C‡
28.3
(719)
PLT10EH-C‡
34.2
(869)
PLT12EH-C‡
40.1
(1019)
.075
(1.9)
.500
(12.7)
.40
(10.2)
.085
(2.2)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
! Available without buckle for applications that do not require mounting.
.80
(20.3)
6.00
(152)
8.00
(203)
250
(1112)
GS4EH, PPTEH
or ST2EH
Most commonly used parts appear in BOLD.
7
Nylon 6.6 Releasable Cable Ties (PRT Series)
PAN-TY ® Releasable
Nylon 6.6 Cable Ties
The extended tab end of releasable cable ties permits easy release and
re-use even after the tie has been pulled up snug by hand. Releasable
ties are particularly useful in applications where changes are anticipated
during development, production or servicing in the field.
E
B
A REF.
STRAIGHT TIP
CURVED TIP
C
D
Head design for Standard Cross Section Ties
To release, grasp the head of the cable tie,
deflect release tab and pull the cable tie
away from the bundle.
Head design for Heavy Cross Section Ties
Except Heavy Ties
Part Number
Length
Width
A
B
in. (mm) in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
1.00
(25)
100
1000
1000
10000
1.50
(38)
100
1000
1000
10000
100
1000
1000
10000
3.00
(76)
100
1000
1000
10000
4.00
(102)
100
1000
1000
5000
2.00
(51)
50
500
250
2500
50
500
250
2500
50
500
250
2500
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
2.00
(51)
—
—
100
1000
5.00
(127)
25
250
100
1000
25
250
100
1000
—
—
100
1000
10.00
(254)
—
—
100
500
12.00
(305)
—
—
100
500
STANDARD CROSS SECTION
PRT1S-C
4.8
(122)
PRT1.5S-C
6.3
(160)
PRT2S-C
7.4
(188)
PRT3S-C
11.5
(292)
PRT4S-C
.316
(8.0)
.190
(4.8)
.052
(1.3)
1.88
(48)
.219
(5.6)
.337
(8.6)
14.5
(368)
50
(222)
Hand Installed
Only
HEAVY CROSS SECTION
PRT2H-L
8.4
(213)
PRT3H-L
11.4
(290)
PRT4H-L
14.5
(368)
.300
(7.6)
.075
(1.9)
.300
(7.6)
3.00
(76)
.480
(12.2)
80
(356)
Hand Installed
Only
4.00
(102)
PAN-TY ® Releasable Lashing Ties — Nylon 6.6
E
B
PANDUIT
A REF.
C
D
Part Number
Length
Width
A
B
in. (mm) in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
EXTRA-HEAVY CROSS SECTION
PRT2EH-C‡
9.0
(229)
PRT5EH-Q
20.1
(510)
PRT6EH-Q
22.2
(564)
PRT8EH-C‡
28.3
(719)
PRT10EH-C‡
34.2
(869)
PRT12EH-C‡
40.1
(1019)
8
.075
(1.9)
.500
(12.7)
.40
(10.2)
.085
(2.2)
Most commonly used parts appear in BOLD.
.80
(20.3)
6.00
(152)
8.00
(203)
250
(1112)
Hand Installed
Only
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
Nylon 6.6 Locking Clamp Ties (PLC Series)
PAN-TY ® Nylon 6.6
Clamp Ties
Clamp ties are used to attach a bundle to another surface
such as a control panel, wall or ceiling using another fastener.
The design allows for bundling before or after screwing clamp
in place.
F
B
E
A REF.
C
D
Part Number
Length Width Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Boss
Height
D
in. (mm)
Boss
Hole
Max.
Width
Dia.
Screw
Bundle
E
F
Size
Dia.
in. (mm) in. (mm) (Metric) in. (mm)
Min. Loop Recommended
Tensile
PANDUIT ®
Strength Installation Tool
Part No.
Lbs. (N)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLC1M-S4-C
4.3
(110)
.100
(2.5)
.045
(1.2)
.153
(3.9)
.239
(6.1)
.118
(3.0)
#4
(M2.5)
.75
(20)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
100
1000
1000 50000
.045
(1.2)
.166
(4.2)
.335
(8.5)
.172
(4.4)
#8
(M4)
1.25
(32)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
100
1000
1000 25000
#6
(M3)
1000
1000 10000
.160
(4.1)
.145
(3.7)
100
.047
(1.2)
100
1000
1000 10000
100
1000
1000
5000
100
1000
1000
5000
50
500
250
2500
50
500
250
2500
INTERMEDIATE CROSS SECTION
PLC1.5I-S8-C
6.1
(156)
.135
(3.4)
STANDARD CROSS SECTION
PLC2S-S6-C
PLC2S-S10-C
PLC3S-S10-C
PLC4S-S10-C
7.9
(201)
7.9
(201)
12.0
(305)
.190
(4.8)
15.0
(381)
.373
(9.5)
.052
(1.3)
.220
(5.6)
.075
(1.9)
.265
(6.7)
#10
(M5)
.206
(5.2)
1.84
(47)
#10
(M5)
3.00
(76)
#10
(M5)
4.00
(102)
50
(222)
GTS, GS2B, GTH,
GS4H, PTS,
PPTS, STS2
or STH2
HEAVY CROSS SECTION
PLC2H-S25-L
PLC4H-S25-L
9.0
(228)
15.1
(384)
.300
(7.6)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
.500
(12.7)
.260
(6.6)
1/4
(M6)
2.00
(51)
4.00
(102)
120
(534)
GTH, GS4H,
GS4EH,PPTEH
STH2 or ST2EH
Most commonly used parts appear in BOLD.
9
Nylon 6.6 Marker and Flag Ties (PLF /PLM Series)
PAN-TY ® Nylon 6.6
Marker and Flag Ties
Marker and Flag Ties fasten and identify bundles at the same time.
They can be marked with PANDUIT ® Marker Pens or you can use
PANDUIT ® Custom Hot Stamping Service.
B
E
A REF.
C
D
PLM1M
PLM1M
PLM2M
Part Number
Length Width
Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Head
Height
D
in. (mm)
PLF1M
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Write-on
Area
in. (mm)
PLF1MB
PLF1MA
Min. Loop Recommended
Std.
Tensile
PANDUIT ®
Installation
Pkg.
Strength
Tool Part No. Qty.*
Lbs. (N)
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
100
1000
1000 25000
100
1000
1000 25000
100
1000
1000 25000
100
1000
1000 10000
100
1000
1000 10000
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLF1M-C
4.3
(109)
PLF1MA-C
5.1
(130)
PLF1MB-C
4.0
(101)
PLM1M-C
PLM2M-C
.31 X .75
(7.9 X 19.1)
.76 X 1.04
(19.1 X 26.4)
.045
(1.1)
.098
(2.5)
3.9
(99)
.154
(3.9)
.180
(4.6)
.31 X .92
(7.9 X 23.4)
.75
(19)
.26 X .95
(6.6 X 24.1)
.035
(.9)
8.0
(203)
.87
(22)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
2.00
(51)
PLM2S
PLM4S
PL3M2S
PL2M2S
Packaging*
Length Width
Thickness
A
B
C
Part Number in. (mm) in. (mm) in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Write-on
Area
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.44 x .87
(11.1 x 22.1)
1.75
(45)
.44 x 2.00
(11.1 x 50.8)
4.00
(102)
.87 x 1.07
(22.1 x 27.2)
1.75
(45)
.87 x 1.79
(22.1 x 45.5)
1.75
(45)
Min. Loop Recommended
Std.
Tensile
PANDUIT ®
Installation
Pkg.
Strength
Tool Part No. Qty.*
Lbs. (N)
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
500
10000
100
1000
500
5000
50
500
500
2500
50
500
500
2500
STANDARD CROSS SECTION
PLM2S-C
7.4
(188)
PLM4S-C
14.6
(371)
PL2M2S-L
7.4
(188)
PL3M2S-L
7.4
(188)
.185
(4.7)
.052
(1.3)
.220
(5.6)
.320
(8.1)
Marker Ties are also available in weather resistant black nylon for outdoor use. May be marked with PANDUIT
®
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2
or STH2
PX-10 White Marking Pen found on page 105.
Custom Hot Stamping Available; See page 52.
10
Most commonly used parts appear in BOLD.
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
Nylon 6.6 Winged Push Mount Ties (PLWP/PRWP Series)
Push mount ties are used to attach a cable bundle to a surface such as a
flat panel. The anchor is easily pressed into a pre-drilled hole and locks in
place. The wings provide constant tension when installed, creating a
stable, secure fixture and rattle-free installation.
PAN-TY ® Nylon 6.6
Winged Push
Mount Ties
B
PLWP
A REF.
D
C
B
PRWP
A REF.
D
C
Winged Nylon 6.6 Push Mount Ties — Locking Style (PLWP)
Part Number
Head
Length Width Thickness Height
A
B
C
D
in. (mm) in. (mm) in. (mm) in. (mm)
Nominal
Max.
Max.
Hole
Panel
Bundle
Dia.
Thickness
Dia.
in. (mm) in. (mm) in. (mm)
Min. Loop Recommended
Std.
Tensile
PANDUIT ®
Installation
Pkg.
Strength
Tool Part No.
Qty.
Lbs. (N)
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLWP1M-C
4.3
(109)
.098
(2.5)
.044
(1.1)
.220
(5.6)
.187
(4.7)
.093
(2.4)
.87
(22)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
100
1000
500
5000
.280
(7.1)
.187
(4.7)
.093
(2.4)
1.25
(32)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
100
1000
500
5000
.252
(6.4)
.105
(2.7)
.093
(2.4)
.157
(4.0)
.105
(2.7)
.093
(2.4)
.105
(2.7)
.093
(2.4)
.157
(4.0)
100
1000
500
5000
—
—
500
5000
—
—
500
5000
—
—
500
5000
—
—
500
5000
100
1000
500
5000
—
—
500
5000
—
—
500
5000
—
—
250
2500
—
—
250
2500
100
1000
500
5000
100
1000
500
5000
—
—
500
5000
—
—
500
5000
—
—
500
5000
—
—
250
2500
INTERMEDIATE CROSS SECTION
PLWP1.5I-C
6.0
(152)
.135
(3.4)
.045
(1.2)
STANDARD CROSS SECTION
PLWP1S-C
PLWP1SA-D‡
PLWP1SB-D‡
PLWP1.5S-D‡
PLWP1.5SA-D‡
PLWP2S-C
PLWP2SA-D‡
PLWP2SB-D‡
5.2
(132)
5.1
(130)
5.2
(132)
6.8
(173)
6.7
(170)
7.8
(198)
7.7
(196)
7.8
(198)
.187
(4.7)
.190
(4.8)
.052
(1.3)
.370
(9.4)
.252
(6.4)
.187
(4.7)
.252
(6.4)
.187
(4.7)
1.00
(25)
1.50
(38)
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or
STH2
1.75
(45)
1.75
(45)
HEAVY CROSS SECTION
PLWP2H-TL‡
PLWP3H-TL‡
8.9
(226)
12.0
(305)
.300
(7.6)
.075
(1.9)
.370
(9.4)
.266
(6.8)
.105
(2.7)
2.00
(51)
3.00
(76)
120
(534)
GTH, GS4H,
STH2 or
PPTEH
Winged Nylon 6.6 Push Mount Ties — Releasable Style (PRWP)
STANDARD CROSS SECTION
PRWP1S-C
PRWP1SA-C
PRWP1SB-D‡
PRWP1.5S-D‡
PRWP2S-D‡
5.2
(132)
5.1
(130)
5.2
(132)
6.8
(173)
7.8
(198)
.266
(6.8)
.190
(4.8)
.052
(1.3)
.370
(9.4)
.105
(2.7)
.093
(2.4)
.157
(4.0)
1.00
(25)
.252
(6.4)
.105
(2.7)
1.50
(38)
1.75
(45)
.266
(6.8)
.105
(2.7)
2.00
(51)
.187
(4.7)
50
(222)
Hand Installed
Only
HEAVY CROSS SECTION
PRWP2H-TL ‡
8.9
(226)
.300
(7.6)
.075
(1.9)
.370
(9.4)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
120
(534)
Hand Installed
Only
Most commonly used parts appear in BOLD.
11
Heat Stabilized Nylon 6.6 Push Mount Ties (PLWP/PRLWP Series)
Center mounted winged push mount cable ties center the
bundle on all bundle diameters.
PAN -TY ® Center Mounted
Heat Stabilized Nylon 6.6
Winged Push Mount Ties
B
A REF.
C
D
PLWP30, 40, 50SC winged push mount
cable ties are for normal wire bundles.
PLWP40SD winged push mount cable ties
with convoluted tubing bump that prevents
lateral and axial movement on
convoluted tubing.
PLWP50SE winged push mount cable ties
with convoluted tubing bump that prevents
lateral movement on convoluted tubing.
BUNDLE DIAMETERS
from .12" to 1.97"
(3mm to 50mm)
Packaging*
Part Number
Head Nominal
Max.
Max.
Length Width Thickness Height
Hole
Panel
Bundle
A
B
C
D
Dia. Thickness
Dia.
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
500
5000
—
—
500
5000
—
—
500
5000
STANDARD CROSS SECTION
PLWP30SC-D30‡
5.8
(147)
1.18
(30)
PLWP40SC-D30‡
7.0
(178)
1.58
(40)
GTS, GS2B, GTH,
GS4H, PTS, PPTS,
STS2 or STH2
PLWP50SC-D30‡
8.2
(208)
PLWP40SD-D30‡
7.0
(178)
1.58
(40)
—
—
500
5000
PLWP50SE-D30‡
8.2
(208)
1.97
(50)
—
—
500
5000
.190
(4.8)
.050
(1.3)
.220
(5.6)
.266
(6.8)
.118
(3.0)
1.97
(50)
50
(222)
Ladder Style Heat Stabilized
Nylon 6.6 Winged Push Mount Ties
B
Unique releasable ladder design eliminates
the need for multiple clamp sizes.
Part Number
A
C
D
Head
Nominal
Max.
Max.
Length Width Thickness Height
Hole
Panel
Bundle
A
B
C
D
Dia.
Thickness
Dia.
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
35
(156)
Hand Installed Only
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
500
5000
—
—
500
5000
STANDARD CROSS SECTION
PRLWP30S-D30‡
PRLWP50S-D30‡
12
4.7
(119)
7.1
(180)
.380
(9.7)
.050
(1.3)
Most commonly used parts appear in BOLD.
.470
(12)
.256
(6.5)
.118
(3.0)
1.43
(36)
2.18
(55)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
Nylon 6.6 Push Mount Ties (PLUP/PLP Series)
The anchor snaps into a hole in a light gauge metal or plastic panel.
No screws or other fasteners required. The umbrella shaped disc
stabilizes the anchor and insures a tight, rattle-free fit. In addition, the
umbrella disc provides a dust-tight and semi-liquid tight seal against the
panel surface. The material is heat stabilized, black Nylon 6.6.
PANDUIT ® Umbrella
Winged Push Mount
Cable Ties
B
A REF.
C
Packaging*
Nominal
A
B
C
Hole
Length
Width Thickness Diameter
in. (mm) in. (mm) in. (mm)
in. (mm)
Part Number
Max.
Panel
Thickness
in. (mm)
Max.
Bundle
Diameter
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
.050
(1.3)
1.57
(40)
49
(218)
Recommended
PANDUIT ®
Installation
Tool
Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
500
5000
—
—
500
5000
STANDARD CROSS SECTION
PLUP40S-D30‡
•PLUP40SE-D30‡
7.0
(177)
.190
(4.8)
.047
(1.2)
.266
(6.8)
GTS, GS2B,
GTH, GS4H,
PTH or PPTS
•For use with Corrugated Loom Tubing.
PAN -TY ® Nylon 6.6
Push Mount
Ties (Style PLP)
B
Head design for standard cross section ties
A REF.
Head design for
intermediate
cross section ties
D
C
Economical Push Mount Tie Style
Packaging*
Part Number
A
Length
in. (mm)
B
Width
in. (mm)
C
Thickness
in. (mm)
D
Head
Height
in. (mm)
Nominal
Hole
Diameter
in. (mm)
.236
(6.0)
.187
(4.7)
Max.
Maximum Min. Loop
Panel
Bundle
Tensile
Thickness Diameter Strength
in. (mm)
in. (mm)
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool
Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
1000
25000
100
1000
1000
10000
—
—
1000
10000
100
1000
1000
10000
INTERMEDIATE CROSS SECTION
PLP1.5I-M‡
6.1
(156)
.135
(3.4)
.045
(1.1)
.090
(2.4)
1.25
(31.8)
40
(178)
GTS, GS2B, PTS,
PPTS or STS2
50
(222)
GTS, GS2B,
GTH,
GS4H, PTS,
PPTS, STS2 or
STH2
STANDARD CROSS SECTION
PLP1S-C
5.3
(134)
PLP1.5S-M‡
6.7
(170)
PLP2S-C
7.9
(200)
1.00
(25)
.180
(4.6)
.50
(1.3)
.354
(9.0)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
.250
(6.4)
.130
(3.2)
1.50
(38)
1.75
(45)
Most commonly used parts appear in BOLD.
13
Weather Resistant Nylon 6.6 Cable Ties (PLT Series)
Weather resistant nylon has greater resistance to ultraviolet light
which damages natural nylon. Where adverse outdoor conditions
exist, see technical/application data section (pages 64-65) to select
proper cable tie material for specific applications.
PAN -TY ® Weather
Resistant Nylon
Cable Ties
B
E
A REF.
C
D
CURVED TIP
SUBMINIATURE AND MINIATURE CROSS SECTION
Part Number
PLT.6SM-C0
PLT1M-C0
PLT1.5M-C0
PLT2M-C0
Length
Width
A
B
in. (mm) in. (mm)
2.8
.070
(71)
(1.8)
3.9
(99)
.098
5.6
(2.5)
(142)
8.0
(203)
Thickness
C
in. (mm)
.030
(.8)
.043
(1.1)
Head
Height
D
in. (mm)
.095
(2.4)
.154
(3.9)
Head
Width
E
in. (mm)
.125
(3.2)
Max.
Bundle
Dia.
in. (mm)
.60
(15)
.180
(4.6)
.87
(22)
1.25
(32)
2.00
(51)
Min. Loop
Tensile
Strength
Lbs. (N)
8
(36)
18
(80)
Recommended
PANDUIT ®
Installation
Tool Part No.
GTS, PTS or
STS2
GTS, GS2B,
PTS, PPTS
or STS2
Packaging*
Std.
Pkg.
Qty.
100
Std.
Ctn.
Qty.
1000
Bulk
Pkg.
Qty.
1000
Bulk
Ctn.
Qty.
50000
100
1000
1000
50000
100
1000
1000
50000
100
1000
1000
25000
100
1000
1000
25000
100
1000
1000
25000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
5000
100
1000
1000
5000
100
500
1000
5000
INTERMEDIATE CROSS SECTION
PLT1.5I-C0
PLT2I-C0
PLT2.5I-C0
PLT3I-C0
PLT4I-C0
5.6
(142)
8.0
(203)
9.7
(246)
11.4
(290)
14.5
(368)
.142
(3.6)
.045
(1.1)
.240
(6.1)
.180
(4.6)
.145
(3.7)
.052
(1.3)
.280
(6.6)
1.38
(35)
2.00
(51)
2.50
(64)
3.00
(76)
4.00
(102)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
STANDARD CROSS SECTION
PLT1S-C0
PLT1.5S-C0
PLT2S-C0
PLT2.5S-C0
PLT3S-C0
PLT4S-C0
PLT4.5S-C0
PLT5S-C0
14
4.8
(122)
6.2
(157)
7.4
(188)
9.8
(249)
11.5
(292)
14.5
(368)
15.5
(394)
17.5
(445)
.316
(8.0)
.190
(4.8)
.052
(1.3)
Most commonly used parts appear in BOLD.
.220
(5.6)
.337
(8.6)
1.00
(25)
1.50
(38)
1.88
(48)
2.50
(64)
3.00
(76)
4.00
(102)
4.50
(114)
5.00
(127)
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡.
Weather Resistant Cable Ties (PLT Series)
PAN-TY ® Weather
Resistant Nylon
Cable Ties
B
E
A REF.
C
D
Part Number
Length
Width
A
B
in. (mm) in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
STRAIGHT TIP
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.480
(12.2)
6.00
(152)
7.00
(178)
8.00
(203)
9.00
(229)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
50
500
100
2000
50
500
100
2000
50
500
100
2000
50
500
100
2000
50
500
100
1000
50
500
250
2500
50
500
250
2500
50
500
250
2500
50
500
250
2500
50
500
250
2000
50
500
100
1000
25
500
100
500
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
25
250
100
1000
25
250
100
1000
25
250
100
1000
25
250
100
1000
25
250
100
500
25
250
100
500
LIGHT-HEAVY CROSS SECTION
PLT6LH-L0
PLT7LH-L0
PLT8LH-L0
PLT9LH-L0
21.9
(556)
24.7
(627)
27.6
(701)
30.5
(775)
.300
(7.6)
.075
(1.9)
.325
(8.3)
120
(534)
GTH, GS4H,
GS4EH
PPTEH or
STH2
HEAVY CROSS SECTION
PLT2H-LO
PLT2.5H-L0
PLT3H-L0
PLT4H-L0
PLT5H-L0
PLT6H-L0
PLT8H-L0
PLT13H-Q0
8.1
(206)
9.8
(251)
11.4
(290)
14.5
(368)
17.7
(450)
20.9
(530)
30.6
(779)
43.3
(1100)
.300
(7.6)
.075
(1.9)
.350
(8.9)
.290
(7.4)
.078
(2.0)
PAN-TY ® Locking
Weather Resistant
Nylon Lashing Ties
.340
(8.6)
E
.480
(12.2)
.560
(14.2)
Part Number
120
(534)
GTH, GS4H,
GS4EH
PPTEH or
STH2
175
(778)
B
PANDUIT
A REF.
C
D
Length
Width
A
B
in. (mm) in. (mm)
2.00
(51)
2.50
(64)
3.00
(76)
4.00
(102)
5.00
(127)
6.00
(152)
9.00
(229)
13.00
(330)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
EXTRA-HEAVY CROSS SECTION
PLT2EH-Q0
PLT5EH-Q0
PLT6EH-Q0
PLT8EH-Q0
PLT10EH-Q0
PLT12EH-Q0
9.0
(229)
20.1
(511)
22.2
(564)
28.3
(719)
34.2
(869)
40.1
(1019)
.075
(1.9)
.500
(12.7)
.400
(10.2)
.085
(2.2)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26 .
All part numbers shown in standard package quantities unless denoted by ‡
.800
(20.3)
2.00
(51)
5.00
(127)
6.00
(152)
8.00
(203)
10.00
(254)
12.00
(305)
250
(1112)
GS4EH
PPTEH or
STH2
Most commonly used parts appear in BOLD.
15
Weather Resistant Cable Ties (PRT Series)
The extended tab end of releasable cable ties permits easy release
and reuse even after tie has been pulled up snug by hand. Releasable
ties are particularly useful where changes are anticipated during
development, production or servicing in the field.
PAN-TY ® Releasable
Weather Resistant
Nylon Lashing Ties
E
B
PANDUIT
A REF.
C
D
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
25
250
100
1000
25
250
100
1000
25
250
100
1000
25
250
100
1000
25
250
100
500
25
250
100
500
EXTRA-HEAVY CROSS SECTION
PRT2EH-Q0
PRT5EH-Q0
PRT6EH-Q0
PRT8EH-Q0
PRT10EH-Q0
PRT12EH-Q0
9.0
(229)
20.1
(510)
22.2
(564)
28.3
(719)
34.2
(869)
40.1
(1019)
.075
(1.9)
.500
(12.7)
.400
(10.2)
.800
(20.3)
.085
(2.2)
Lashing Tie
Mounting Clip
2.00
(51)
5.00
(127)
6.00
(152)
8.00
(203)
10.00
(254)
12.00
(305)
250
(1112)
Hand Installed
Only
Converts PANDUIT ® PAN -TY ® Lashing Ties into clamps. Easily snaps
in place for a secure clamp. Used with Lashing Ties
(see pages 7, 8, 15 and above).
B
A
C
Dimensions
in. (mm)
Part Number
MCEH-S25-C0
16
Height
A
in. (mm)
.13
(3.3)
Width
B
in. (mm)
.67
(17.0)
Most commonly used parts appear in BOLD.
Packaging*
Length
C
in. (mm)
1.38
(35)
Material
Weather
Resistant
Nylon 6.6
Color
Black
Where
Used
Outdoors or
Indoors
Mounting
Method
1/4" (M6)
screw
(except
flathead)
Std.
Pkg.
Qty.
—
Std.
Ctn.
Qty.
—
Bulk
Pkg.
Qty.
100
Bulk
Ctn.
Qty.
1000
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡
Weather Resistant Cable Ties (PRT Series)
Releasable Cable Ties
(PRT Series)
The extended tab end of releasable cable ties permits easy release and
reuse even after tie has been pulled up snug by hand. Releasable ties
are particularly useful where changes are anticipated during
development, production or servicing in the field.
E
B
A REF.
STRAIGHT TIP
CURVED TIP
C
D
Head design for Standard Cross Section Ties
Head design for Heavy Cross Section Ties
To release, grasp the head of
the cable tie, deflect release
tab and pull the cable tie away
from the bundle.
Part Number
Cross
Section
Length
Width Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.316
(8.0)
1.00
(25)
1.50
(38)
1.88
(48)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
100
10000
100
1000
100
10000
100
1000
100
10000
100
1000
100
10000
100
1000
100
5000
50
500
250
2500
50
500
250
2500
50
500
250
2500
STANDARD CROSS SECTION
PRT1S-C0
PRT1.5S-C0
PRT2S-C0
Std.
PRT3S-C0
PRT4S-C0
4.8
(122)
6.3
(160)
7.4
(188)
11.5
(292)
14.5
(368)
.190
(4.8)
.052
(1.3)
.219
(5.6)
.337
(8.6)
3.00
(76)
4.00
(102)
.480
(12.2)
2.00
(51)
3.00
(76)
4.00
(102)
50
(222)
Hand Installed
Only
HEAVY CROSS SECTION
PRT2H-L0
PRT3H-L0
PRT4H-L0
Hvy.
8.4
(213)
11.4
(290)
14.5
(368)
.300
(7.6)
.075
(1.9)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26 .
All part numbers shown in standard package quantities unless denoted by ‡
.300
(7.6)
80
(356)
Hand Installed
Only
Most commonly used parts appear in BOLD.
17
Weather Resistant Nylon 6.6 Clamp Ties (PLC Series)
Clamps are used to attach a bundle to another surface such as a control
panel, wall or ceiling using another fastener. The design allows for
bundling before or after screwing clamp in place.
PAN -TY ® Weather
Resistant Nylon
Clamp Ties
F
B
E
A REF.
C
D
Part Number
Length
A
in.
(mm)
Boss
Width Thickness Height
B
C
D
in.
in.
in.
(mm)
(mm)
(mm)
Boss
Width
E
in.
(mm)
Nominal
Hole
Dia.
F
in. (mm)
Screw
Size
Max.
Bundle
Dia.
in. (mm)
Min.
Loop
Recommended
Std.
Tensile
PANDUIT ®
Installation
Pkg.
Strength
Tool Part No.
Qty.
Lbs. (N)
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLC1M-S4-C0
4.3
(110)
.100
(2.5)
.045
(1.2)
.153
(3.9)
.239
(6.1)
.118
(3.0)
#4
(M2.5)
.75
(20)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
100
1000 1000 50000
.045
(1.2)
.166
(4.2)
.335
(8.5)
.172
(4.4)
#8
(M4)
1.25
(32)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
100
1000 1000 25000
#6
(M3)
1000 1000 10000
.160
(4.1)
.145
(3.7)
100
.047
(1.2)
100
1000 1000 10000
100
1000 1000
5000
100
1000 1000
5000
INTERMEDIATE CROSS SECTION
PLC1.5I-S8-C0
6.1
(156)
.135
(3.4)
STANDARD CROSS SECTION
PLC2S-S6-C0
PLC2S-S10-C0
PLC3S-S10-C0
PLC4S-S10-C0
7.9
(201)
.190
(4.8)
12.0
(305)
15.0
(381)
.390
(9.5)
.052
(1.3)
.220
(5.6)
.075
(1.9)
.265
(6.7)
.206
(5.2)
#10
(M5)
1.84
(47)
3.00
(76)
4.00
(102)
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
HEAVY CROSS SECTION
PLC2H-S25-TL0‡
PLC4H-S25-L0
9.0
(228)
15.1
(384)
.300
(7.6)
.500
(12.7)
.260
(6.6)
.262
(6.7)
1/4
(M6)
2.00
(51)
4.00
(102)
120
(534)
GTH, GS4H,
GS4EH, PPTEH
or STH2
—
—
250
2500
50
500
250
2500
NATURAL POLYPROPYLENE CABLE TIES (Refer to drawing on page 19)
Part Number
Length
A
in.
(mm)
Max.
Min.
Width
Head
Head Bundle
Loop
Recommended
B
Thickness Height Width
Dia.
Tensile
PANDUIT ®
Installation
in.
C
D
E
in.
Strength
(mm)
in. (mm) in. (mm) in. (mm) (mm) Lbs. (N) Tool Part No.
Packaging*
Tool
Setting1
(except STS2/STH2)
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLT1M-M109
3.9
(99)
.098
(2.5)
.043
(1.1)
.154
(3.9)
.180
(4.6)
.87
(22)
11
(49)
GTS, GS2B,
PTS, PPTS
or STS2
2
—
—
1000 50000
.045
(1.2)
.180
(4.6)
.240
(6.1)
1.38
(35)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
3
—
—
1000 25000
.316
(8.0)
1.88
(48)
3.00
(76)
4.00
(102)
—
—
1000 10000
—
—
1000 10000
—
—
1000
5000
—
—
250
2500
—
—
250
2500
—
—
250
2500
INTERMEDIATE CROSS SECTION
PLT1.5I-M109
5.6
(142)
.142
(3.6)
STANDARD CROSS SECTION
PLT2S-M109
PLT3S-M109
PLT4S-M109
7.4
(188)
11.5
(292)
14.5
(368)
.190
(4.8)
.052
(1.3)
.220
(5.6)
.337
(8.6)
30
(133)
GTS, GS2B,
GTH, GS4H, 5 (GTS, GS2B, PTS, PPTS)
PTS, PPTS,
2 (GTH, GS4H)
STS2 or STH2
HEAVY CROSS SECTION
PLT2H-TL109
PLT3H-TL109
PLT4H-TL109
8.1
(206)
11.4
(290)
14.5
(368)
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
2.00
(51)
3.00
(76)
4.00
(102)
50
(222)
GTH, GS4H,
PPTEH or STH2
5
NOTE 1: For best results, use tool tensions at the low end of the adjustment range, i.e. Std. Cable Ties installed at tool setting 5 to arrive at optimum installation tension.
18
Most commonly used parts appear in BOLD.
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 24-26.
All part numbers shown in standard package quantities unless denoted by ‡
Polypropylene Cable Ties (PLT / PRT Series)
PAN-TY ® Weather
Resistant
Polypropylene
Cable Ties
For chemical resistance in outdoor applications that are unsuitable for
nylon and that do not require high loop tensile strengths. Color is black.
B
E
A REF.
C
D
CURVED TIP
Part Number
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.043
(1.1)
.154
(3.9)
.180
(4.6)
.87
(22)
11
(49)
.045
(1.1)
.180
(4.6)
.240
(6.1)
1.38
(35)
18
(80)
.316
(8.0)
1.88
(48)
3.00
(76)
4.00
(102)
Length
Width Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Tool
Setting 1
(except
STS2/
STH2)
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GTS, GS2B,
PTS, PPTS
or STS2
2
—
—
1000
50000
GTS, GS2B,
PTS, PPTS
or STS2
3
—
—
1000
25000
5 (GTS,
GS2B,
PTS,
PPTS)
2 (GTH,
GS4H)
—
—
1000
10000
—
—
1000
10000
—
—
1000
5000
—
—
250
2500
—
—
250
2500
—
—
250
2500
Min. Loop Recommended
Tensile
PANDUIT ®
Strength Installation Tool
Part No.
Lbs. (N)
Packaging*
MINIATURE CROSS SECTION
PLT1M-M100
3.9
(99)
.098
(2.5)
INTERMEDIATE CROSS SECTION
PLT1.5I-M100
5.6
(142)
.142
(3.6)
STANDARD CROSS SECTION
PLT2S-M100
PLT3S-M100
PLT4S-M100
7.4
(188)
11.5
(292)
14.5
(368)
.190
(4.8)
.052
(1.3)
.220
(5.6)
.337
(8.6)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2
or STH2
30
(133)
HEAVY CROSS SECTION
PLT2H-TL100
PLT3H-TL100
PLT4H-TL100
8.1
(206)
11.4
(290)
14.5
(368)
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
2.00
(51)
3.00
(76)
4.00
(102)
GTH, GS4H,
PPTEH
or STH2
50
(222)
5
NOTE 1: For best results, use tool tensions at the low end of the adjustment range, i.e. Std. Cable Ties installed at tool setting 5 to arrive at optimum installation tension.
PAN-TY ® Releasable
Polypropylene
Cable Ties
E
B
A REF.
STRAIGHT TIP
CURVED TIP
C
D
Head design for Standard Cross Section Ties
To release, grasp the head of the cable
tie, deflect release tab and pull the
cable tie away from the bundle.
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Head design for Heavy Cross Section Ties
Max.
Min. Loop
Bundle
Tensile
Dia.
Strength
in. (mm) Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part. No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
—
—
100
1000
—
—
EXTRA-HEAVY CROSS SECTION — WEATHER RESISTANT POLYPROPYLENE
PRT5EH-C100
PRT6EH-C100
20.1
(510)
22.2
(564)
.500
(12.7)
.075
(1.9)
.400
(10.2)
*Order the number of pieces required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡
.800
(20.3)
5.00
(127)
6.00
(152)
90
(400)
Hand Installed
Most commonly used parts appear in BOLD.
19
Flame Retardant Nylon 6.6 Cable Ties
PAN -TY ® Flame
Retardant Nylon 6.6
Cable Ties and
Marker Ties
• Flame Retardant Nylon 6.6 meets the requirements of UL94V-0
• Can be used with flame retardant cable tie mounts (see pages 86 and 89)
B
E
A REF.
C
D
CURVED TIP
PLM1M
Part Number
Length
Width Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Head
Height
D
in. (mm)
PLF1M
PLT
Head
Width
E
in. (mm)
Marker
Write-on
Area
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.180
(4.6)
.31 x .75
(7.9 x 19.1)
.26 x .95
(6.6 x 24.1)
.87
(22)
.75
(20)
.188
(4.8)
—
.87
(22)
2.00
(51)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
—
—
1000 25000
—
—
1000 25000
—
—
1000 25000
—
—
1000 25000
—
—
1000 25000
—
—
1000 25000
—
—
1000 10000
—
—
1000
5000
—
—
250
2500
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLF1M-M69‡
PLM1M-M69‡
PLT1M-M69‡
PLT2M-M69‡
4.3
(109)
3.9
(99)
4.0
(102)
8.0
(203)
.098
(2.5)
.045
(1.1)
.035
(.9)
.043
(1.1)
.154
(3.9)
18
(80)
GTS, GS2B,
PTS. PPTS
or STS2
INTERMEDIATE CROSS SECTION
PLT1.5I-M69‡
PLT2I-M69‡
5.6
(142)
8.0
(203)
.142
(3.6)
.142
(3.6)
.044
(1.1)
.177
(4.5)
.239
(6.1)
—
1.38
(35)
2.00
(51)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
.190
(4.8)
.052
(1.3)
.052
(1.3)
.220
(5.6)
.320
(8.1)
.337
(8.6)
—
1.88
(48)
4.00
(102)
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
4.00
(102)
120
(534)
STANDARD CROSS SECTION
PLT2S-M69‡
PLT4S-M69‡
7.4
(188)
14.5
(368)
HEAVY CROSS SECTION
PLT4H-TL69‡
20
14.6
(371)
Most commonly used parts appear in BOLD.
—
GTH, GS4H,
GS4EH,
PPTEH or
STH2
*Order the number of pieces required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡
Weather Resistant Nylon 12 Cable Ties
• For high moisture, corrosive environments and
low temperatures
• For indoor use or weather resistant applications
PAN-TY ® Weather Resistant
Nylon 12 Cable Ties
B
E
A REF.
C
D
CURVED TIP
Part Number
Length
A
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
.045
(1.1)
.180
(4.6)
.240
(6.1)
1.38
(35)
25
(111)
.052
(1.3)
.220
(5.6)
.316
(8.0)
.337
(8.6)
1.88
(48)
4.00
(102)
40
(178)
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
8.00
(203)
90
(400)
.300
(7.6)
.075
(1.9)
.290
(7.4)
.480
(12.2)
4.00
(102)
90
(400)
Width
B
in. (mm)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GTS, GS2B,
PTS, PPTS or
STS2
—
—
1000
25000
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
—
—
1000
10000
—
—
1000
5000
GTH, GS4H,
GS4EH,
PPTEH or
STH2
—
—
100
2000
GTH, GS4H,
GS4EH,
PPTEH or
STH2
—
—
250
2500
INTERMEDIATE CROSS SECTION
PLT1.5I-M120‡
5.6
(142)
.142
(3.6)
STANDARD CROSS SECTION
PLT2S-M120‡
PLT4S-M120‡
7.4
(188)
14.5
(368)
.190
(4.8)
LIGHT-HEAVY CROSS SECTION
PLT8LH-C120‡
27.6
(701)
HEAVY CROSS SECTION
PLT4H-TL120‡
14.5
(368)
*Order the number of pieces required in multiples of packaging quantities.
All part numbers shown in standard package quantities unless denoted by ‡.
Most commonly used parts appear in BOLD.
21
HALAR** and TEFZEL*** Cable Ties
PAN-TY ® HALAR**
Fluoropolymer
Cable Ties
HALAR** Cable Ties are UL Listed and UL Recognized as: Suitable for
use in Air Handling Spaces per NEC, Section 300-22 (c) and (d). Many
inspectors look for the distinctive maroon color. HALAR** cable ties have
a low smoke density rating and an excellent flammability rating of
UL94V-0. Other applications include nuclear plants, chemical
environments, telecommunications equipment, aerospace, high and low
temperature environments.
B
E
A REF.
C
D
CURVED TIP
Part Number
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
.043
(1.1)
.186
(4.7)
.188
(4.8)
.87
(22)
18
(80)
.055
(1.4)
.059
(1.5)
.240
(6.1)
.320
(8.1)
1.88
(48)
3.00
(76)
50
(222)
Length
Width Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GTS, GS2B,
PTS, PPTS
or STS2
100
1000
1000
25000
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
100
1000
1000
10000
100
1000
1000
5000
MINIATURE CROSS SECTION
PLT1M-C702
4.0
(102)
.098
(2.5)
STANDARD CROSS SECTION
PLT2S-C702
PLT3S-C702
7.4
(188)
11.6
(295)
.190
(4.8)
**HALAR is a registered trademark of Solvay Solexis, Inc.
PAN-TY ®
TEFZEL***
Fluoropolymer
Cable Ties
TEFZEL*** cable ties are ideal for applications requiring resistance to
environmental stresses such as chemical attack, gamma radiation, ultraviolet
radiation and extreme temperatures. In addition, TEFZEL*** has a UL
Flammability rating of UL94V-0. TEFZEL*** ties have a distinctive aqua blue color.
B
E
A REF.
C
D
CURVED TIP
Part Number
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
.043
(1.1)
.186
(4.7)
.188
(4.8)
.87
(22)
18
(80)
.045
(1.1)
.180
(4.6)
.240
(6.1)
2.00
(51)
.320
(8.1)
Length
Width Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
GTS, GS2B, PTS,
PPTS or STS2
100
1000
1000 25000
25
(111)
GTS, GS2B, PTS,
PPTS or STS2
100
1000
1000 10000
1.88
(48)
3.00
76)
4.00
(102)
100
1000
1000 10000
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
100
1000
1000
5000
100
1000
1000
5000
3.00
(78)
4.00
(102)
50
500
250
2500
120
(534)
50
500
250
2500
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
PLT1M-C76
4.0
(102)
.098
(2.5)
INTERMEDIATE CROSS SECTION
8.0
.135
PLT2I-C76
(203)
(3.4)
STANDARD CROSS SECTION
PLT2S-C76
PLT3S-C76
PLT4S-C76
7.4
(188)
11.6
(295)
14.6
(371)
.055
(1.4)
.190
(4.8)
.055
(1.4)
.240
(6.1)
HEAVY CROSS SECTION
11.5
PLT3H-L76
PLT4H-L76
(292)
14.6
(371)
.300
(7.6)
.075
(1.9)
.360
(9.1)
.480
(12.2)
GTH, GS4H,
GS4EH
PPTEH or
STH2
***TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
22
Most commonly used parts appear in BOLD.
*Order the number of pieces required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡.
Fluorescent Cable Ties
Designed for packaging and color-coding applications. Ties are
offered in four “hot” colors: Orange, Yellow, Green and Pink.
PAN-TY ® Nylon 6.6
Fluorescent Ties
B
E
A REF.
C
D
CURVED TIP
Part Number
Color
Length
A
in.
(mm)
Width
B
in.
(mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
.098
(2.5)
.043
(1.1)
.154
(3.9)
.180
(4.6)
.87
(22)
18
(80)
GTS, GTH, GS2B,
PTS, PPTS
or STS2
.045
(1.1)
.180
(4.6)
.240
(6.1)
2.00
(51)
30
(133)
GTS, GTH, GS2B,
PTS, PPTS
or STS2
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
—
—
1000
1000
50000
50000
—
—
—
—
1000
1000
50000
50000
—
—
—
—
—
—
1000
1000
1000
25000
25000
25000
—
—
1000
25000
—
—
—
—
—
—
—
—
1000
1000
1000
1000
10000
10000
10000
10000
—
—
—
—
—
—
1000
1000
1000
10000
10000
10000
—
—
1000
10000
MINIATURE CROSS SECTION
PLT1M-M53
PLT1M-M54
Orange
Yellow
PLT1M-M55
PLT1M-M59
Green
Pink
3.9
(99)
INTERMEDIATE CROSS SECTION
PLT2I-M53
PLT2I-M54
PLT2I-M55
Orange
Yellow
Green
PLT2I-M59
Pink
8.0
(203)
.142
(3.6)
STANDARD CROSS SECTION
PLT2S-M53
Orange
PLT2S-M54
PLT2S-M55
PLT2S-M59
Yellow
Green
Pink
PLT3S-M53
PLT3S-M54
PLT3S-M55
Orange
Yellow
Green
PLT3S-M59
Pink
7.4
(188)
.316
(8.0)
.190
(4.8)
.052
(1.3)
1.88
(48)
.220
(5.6)
11.5
(292)
*Order the number of pieces required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡.
50
(222)
.337
(8.6)
3.00
(76)
GTS, GS2B,
GTH, GS4H, PTS,
PPTS, STS2
or STH2
Most commonly used parts appear in BOLD.
23
Part Number Suffix Codes for All PAN-TY ® Cable Ties
Part Number System (Example of PLT2S-C)
PLT
2
Part Description:
P = PANDUIT ®
Size:
Approximate
Maximum Bundle
Diameter in Inches
(at beginning of P/N)
L = Locking
T = Tie
C = Clamp
F = Flag
M = Marker
R = Releasable
W = Wing
P = Push Mount
U = Umbrella
S
—
Cross Section:
SM = Subminiature
M = Miniature
I = Intermediate
S = Standard
LH = Light-Heavy
H = Heavy
EH = Extra-Heavy
Screw Hole Size:
(Clamp Ties Only)
-S4 = #4 (M2.5)
-S6 = #6 (M3)
-S8 = #8 (M4)
-S10 = #10 (M5)
-S25 = 1/4 (M6)
C
Package Size:
Color:
Q = 25
See Material/Color
L = 50
chart. Not all ties
C = 100
available in all colors.
TL = 250
D = 500
M = 1000
XMR = 2 reels/5000 ea.
Material/Color Chart
Material/Color
Nylon 6.6 — Natural (See Note)
Weather Resistant Nylon 6.6 —
Black
Weather Resistant Nylon 6.6 —
Black (meets MIL Spec.)
Nylon 6.6 — Brown
Nylon 6.6 — Red
Nylon 6.6 — Orange
Nylon 6.6 — Yellow
Nylon 6.6 — Green
Nylon 6.6 — Blue
Nylon 6.6 — Purple
Nylon 6.6 — Gray
Nylon 6.6 — White
Nylon 6.6 — Telephone Gray
Nylon 6.6 — Black
PANDUIT ® Mil Spec
Suffix**
Suffix*
✔
9
0
N/A
00
0
1
2
3
4
5
6
7
8
10
14
20
1
2
3
4
5
6
7
8
N/A
N/A
N/A
Material/Color
Heat Stabilized Nylon 6.6 — Black
Heat Stabilized Nylon 6.6 — Natural
Nylon 6.6 — Fluorescent Orange
Nylon 6.6 — Fluorescent Yellow
Nylon 6.6 — Fluorescent Green
Nylon 6.6 — Fluorescent Pink
Flame Retardant Nylon 6.6 — Black
Flame Retardant Nylon 6.6 — Ivory
TEFZEL*** — Aqua Blue
Weather Resistant Polypropylene — Black
Natural Polypropylene — Green
Nylon 12 — Black
Heat Stabilized Weather Resistant
Nylon 6.6 — Black
HALAR**** — Maroon
PANDUIT ® Mil Spec
Suffix**
Suffix*
30
N/A
39
N/A
53
N/A
54
N/A
55
N/A
59
N/A
60
N/A
69
N/A
76
N/A
100
N/A
109
N/A
120
N/A
300
N/A
702
N/A
*NOTE: ✔ designates PANDUIT ® standard Natural Nylon 6.6 color/material. No suffix required in part number.
**NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368).
***TEFZEL is a registered trademark of E.I. DuPont de Nemours Co.
****HALAR is a registered trademark of Solvay Solexis, Inc.
Part Number
PLC1M-S4-C
PLC1.5I-S8-C
PLC2S-S6-C
PLC2S-S10-C
PLC3S-S10-C
PLC4S-S10-C
PLC2H-S25-L
PLC4H-S25-L
PLF1M-C
PLF1MA-C
PLF1MB-C
PLM1M-C
PLM2M-C
PLM2S-C
PLM4S-C
24
Standard Packaging
Natural
Nylon
Available Color/
6.6
Material (Suffix)
✔
0
✔
0
✔
0
✔
0, 14
✔
0
✔
0
✔
✔
0
✔
0
✔
3, 4
✔
✔
0
✔
✔
0, 4
✔
Most commonly used parts appear in BOLD.
Bulk Packaging
Part Number
PLC1M-S4-M
PLC1.5I-S8-M
PLC2S-S6-M
PLC2S-S10-M
PLC3S-S10-M
PLC4S-S10-M
PLC2H-S25-TL
PLC4H-S25-TL
PLF1M-M
PLF1MA-M
PLF1MB-M
PLMIM-M
PLM2M-M
PLM2S-D
PLM4S-D
Natural
Nylon 6.6
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Available Color/
Material (Suffix)
0, 30
0, 30
0
0, 20, 30
0
0, 30
0, 30
0, 30
0, 2, 3, 4, 6, 10, 69
0, 2, 3, 4, 5, 6, 10
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 69
0, 4, 6
0, 2, 3, 4, 5, 6, 8
0, 2, 4, 6
Part Number Suffix Codes for All PAN-TY ® Cable Ties
Standard Packaging
Natural
Nylon
Available Color/
6.6
Material (Suffix)
Part Number
PL2M2S-L
✔
0
PL3M2S-L
✔
PLP1.5I-C
✔
Bulk Packaging
Part Number
PL2M2S-D
PL3M2S-D
PLP1.5I-M
PLP1S-M
PLP1.5S-M
PLP2S-M
PLT.6SM-M
PLT.7M-M
PLT1M-M
Natural
Nylon 6.6
✔
✔
✔
✔
✔
✔
✔
✔
✔
Available Color/
Material (Suffix)
0, 4, 10
0, 4
0, 30
0, 30
PLP2S-C
PLT.6SM-C
PLT.7M-C
PLT1M-C
✔
✔
✔
✔
PLT1.5M-C
✔
0
PLT1M-XMR
PLT1.5M-M
✔
✔
PLT2M-C
✔
0
PLT1.5M-XMR
PLT2M-M
✔
✔
PLT1.5I-C
✔
PLT1.5I-M
✔
PLT2I-C
✔
0, 1, 2, 3, 4, 5, 6, 7, 8,
10, 20, 30
0, 14, 30, 76
PLT2I-M
✔
PLT2.5I-C
PLT3I-C
PLT4I-C
PLT1S-C
PLT1.5S-C
PLT2S-C
✔
✔
✔
✔
✔
✔
0
0, 14
0, 14
0
0
0, 00, 1, 2, 3, 4, 5, 6, 7,
8, 10, 20, 30, 76, 702
PLT2.5I-M
PLT3I-M
PLT4I-M
PLT1S-M
PLT1.5S-M
PLT2S-M
✔
✔
✔
✔
✔
✔
PLT2.5S-C
PLT3S-C
✔
✔
0
0, 00, 2, 20, 30, 76, 702
PLT2.5S-M
PLT3S-M
✔
✔
PLT4S-C
✔
PLT4S-M
✔
PLT4.5S-C
PLT5S-C
PLT6LH-L
PLT7LH-L
PLT8LH-L
PLT8LH-Q
PLT9LH-L
PLT10LH-L
PLT2H-L
PLT2.5H-L
PLT3H-L
PLT4H-L
✔
✔
✔
✔
✔
0, 00, 2, 3, 4, 5, 6, 8, 20,
30, 76
0
0
0
0
0
0
0
PLT4.5S-M
PLT5S-M
PLT6LH-C
PLT7LH-C
PLT8LH-C
✔
✔
✔
✔
✔
PLT9LH-C
PLT10LH-C
PLT2H-TL
PLT2.5H-TL
PLT3H-TL
PLT4H-TL
✔
✔
✔
✔
✔
✔
0, 30
PLT4H-C
PLT5H-L
PLT6H-L
PLT8H-Q
PLT8H-L
PLT13H-Q
PLT2EH-Q
✔
✔
✔
PLT5H-C
PLT6H-C
PLT8H-C
✔
✔
✔
0, 30
0, 30
0, 00, 30
PLT13H-C
PLT2EH-C
✔
✔
0, 3
0
✔
✔
✔
✔
✔
✔
✔
✔
0
0, 00, 1, 2, 3, 4, 5, 6, 7,
8, 10, 14, 30, 76, 702
0
0
0, 76
0, 00, 76
0
0
0
0
0
0
0
0, 30
0, 30
0, 30
0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 14,
20, 30, 53, 54, 55, 59, 60, 69, 76,
100, 109, 300, 702
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 30
0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 14,
20, 30
0, 00, 30
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20, 30,
69
0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20,
30, 69, 100, 109, 120, 300
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 14, 20,
30, 53, 54, 55, 59, 69, 76, 300
0, 20
0, 2, 3, 4, 5, 6, 8, 10, 14, 20, 30
0, 2, 5, 6, 14, 20, 30
0, 30, 38, 300
0, 30
0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20,
30, 38, 39, 53, 54, 55, 59, 60, 69,
76, 100, 109, 120, 300, 702
0, 30
0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20,
30, 53, 54, 55, 59, 76, 100, 109,
702
0, 00, 1, 2, 3, 4, 5, 6, 7, 8, 10, 14,
20, 30, 69, 76, 100, 109, 120, 300
0
0, 2, 3, 4, 5, 6, 8, 30
0
0, 30
0, 120
0, 2, 4, 6, 30, 100, 109, 300
0
0, 30, 76, 100, 109
0, 00, 1, 2, 3, 4, 5, 6, 10, 20, 30,
69, 76, 100, 109, 120, 300
Most commonly used parts appear in BOLD.
25
Part Number Suffix Codes for All PAN-TY ® Cable Ties
Part Number
Standard Packaging
Natural
Nylon
Available Color/
6.6
Material (Suffix)
PLT5EH-Q
✔
0
PLT6EH-Q
✔
0
PLT8EH-Q
PLT10EH-Q
PLT12EH-Q
PLWP1M-C
PLWP1.5I-C
PLWP1S-C
PLWP2S-C
PRT1S-C
PRT1.5S-C
PRT2S-C
PRT3S-C
PRT4S-C
PRT2H-L
PRT3H-L
PRT4H-L
PRT2EH-Q
PRT5EH-Q
PRT6EH-Q
PRT8EH-Q
PRT10EH-Q
PRT12EH-Q
PRWP1S-C
26
0
0
0
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
✔
Most commonly used parts appear in BOLD.
Bulk Packaging
Part Number
PLT3EH-NB-C
PLT5EH-C
PLT5EH-NB-C
PLT6EH-C
PLT6EH-NB-C
PLT8EH-C
PLT10EH-C
PLT12EH-C
PLUP40S-D
PLUP40SE-D
PLWP1M-D
PLWP1.5I-D
PLWP1S-D
PLWP1SA-D
PLWP1SB-D
PLWP1.5S-D
PLWP1.5SA-D
PLWP2S-D
PLWP2SA-D
PLWP2SB-D
PLWP2H-TL
PLWP3H-TL
PLWP30SC-D
PLWP40SC-D
PLWP40SD-D
PLWP50SC-D
PLWP50SE-D
PRLWP30S-D
PRLWP50S-D
PRT1S-M
PRT1.5S-M
PRT2S-M
PRT3S-M
PRT4S-M
PRT2H-TL
PRT3H-TL
PRT4H-TL
PRT2EH-C
PRT5EH-C
PRT6EH-C
PRT8EH-C
PRT10EH-C
PRT12EH-C
PRWP1S-D
PRWP1SA-D
PRWP1SB-D
PRWP1.5S-D
PRWP2S-D
PRWP2H-TL
PRST30S-S14-M
Natural
Nylon 6.6
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Available Color/
Material (Suffix)
0
0
0
0
0
0
0
0
30
30
0, 30
30
0, 20, 30
30
0, 30
0, 30
0
30
30
30
30
30
30
30
0
0, 30
0, 2, 3, 4, 6, 7
0
0, 2, 3, 4, 6
0
0
0
0, 100
0, 100
0, 100
0, 100
0
0
0
0, 20, 30
0
30
DOME-TOP ® Barb Ty Cable Ties
DOME-TOP ® Barb Ty Cable Tie Features/Benefits
1. DOME -TOP ® Head
2. Stainless Steel Barb
3. Low Threading Force
• Unique patented design
• Round smooth edges
• No irritation to installer’s hands
• Made of 316 corrosion resistant
stainless steel
• Provides consistent
performance and reliability for
users who prefer a cable tie
with a metal barb
• Infinitely adjustable for tight
bundles through its entire
bundle range
• Reduces installer fatigue
• Increases productivity
4. High Tensile Strength
5. Anti-Slip Strap Body
6. Finger Tip Grip
• Exceeds industry and
Aerospace Standard
SAE (AS23190) standards
• Available in four loop tensile
strengths from 18 lbs. (80N) to
120 lbs. (534N) to provide a
wide selection
• Ribbed and stippled strap
body prevents axial and
lateral movement
• Exclusively designed finger
grip is available on all sizes
of DOM E-TOP ® Barb Ty Cable
Ties to assure positive grip
during threading of the tie
7. Curved Tip
8. Material/Size Availability
• Orients tip toward head to speed
installation; lowers installed cost
• Faster initial threading
• Easier to pick up from flat surfaces
• Available in lengths from 4.0"
(102mm) to 30.7" (780mm) to
meet a variety of applications
• Several materials available for
special environments: Natural 6.6
nylon, weather resistant black 6.6
nylon, heat stabilized 6.6 nylon
and 11 different colors
Most commonly used parts appear in BOLD.
27
DOME-TOP ® Barb Ty Cable Ties (BT Series)
• Available in Miniature, Intermediate, Standard and
Light-Heavy cross sections
• Bundle diameters up to 9.00" (229mm)
• Available in natural, weather resistant and heat stabilized
nylon and 11 different colors
• Tool or hand installed
DOME-TOP ® Barb Ty
Nylon 6.6 Locking
Cable Ties
B
E
A REF.
STRAIGHT TIP
C
D
CURVED TIP
Side View
Front View
PartNumber
Length
Width
A
B
in. (mm) in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.172
(4.4)
.90
(23)
.182
(4.6)
1.50
(38)
2.00
(51)
4.00
(102)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
Packaging*
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
1000
50000
100
1000
1000
25000
100
1000
1000
25000
100
1000
1000
10000
100
1000
1000
25000
100
1000
1000
25000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
50
500
250
2500
50
500
250
2500
50
500
250
2500
50
500
100
2000
50
500
100
2000
50
500
100
2000
50
500
100
1000
50
500
100
1000
MINIATURE CROSS SECTION
BT1M-C
BT1.5M-C
BT2M-C
BT4M-C
4.0
(102)
6.3
(160)
7.9
(201)
14.2
(361)
.036
(0.9)
.095
(2.4)
.046
(1.2)
.156
(4.0)
GTS, GS2B,
PTS, PPTS
or STS2
18
(80)
INTERMEDIATE CROSS SECTION
BT1.5I-C
BT2I-C
BT3I-C
BT4I-C
6.1
(155)
8.0
(203)
11.3
(287)
14.3
(363)
.041
(1.0)
.141
(3.6)
.185
(4.7)
.248
(6.3)
.049
(1.2)
1.50
(38)
2.00
(51)
3.00
(76)
4.00
(102)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
STANDARD CROSS SECTION
BT2S-C
BT3S-C
BT4S-C
8.0
(203)
12.0
(305)
15.1
(384)
.045
(1.2)
.185
(4.7)
.052
(1.3)
.220
(5.6)
.320
(8.1)
2.00
(51)
3.00
(76)
4.00
(102)
50
(222)
GTS, GS2B,
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
LIGHT-HEAVY CROSS SECTION (STRAIGHT TIP)
BT2LH-L
BT3LH-L
BT4LH-L
BT5LH-L
BT6LH-L
BT7LH-L
BT8LH-L
BT9LH-L
28
8.7
(221)
11.8
(300)
14.9
(378)
18.1
(460)
21.2
(538)
24.4
(620)
27.5
(699)
30.7
(780)
.275
(7.0)
.065
(1.7)
Most commonly used parts appear in BOLD.
.320
(8.1)
.520
(13.2)
2.00
(51)
3.00
(76)
4.00
(102)
5.00
(127)
6.00
(152)
7.00
(178)
8.00
(203)
9.00
(229)
120
(534)
GTH, GS4H,
GS4EH,
PPTEH, STH2
or ST2EH
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 34-35.
All part numbers shown in standard package quantities unless denoted by ‡.
Weather Resistant DOME-TOP ® Barb Ty Cable Ties (BT Series)
• Available in Miniature, Intermediate, Standard and
Light-Heavy cross sections
• Bundle diameters up to 9.00" (229mm)
• Weather resistant nylon has greater resistance to ultraviolet
light which damages natural nylon
• Tool or hand installed
DOME-TOP ® Barb Ty
Weather Resistant Nylon
6.6 Locking Cable Ties
B
E
A REF.
Except LH -0 Ties
STRAIGHT TIP
C
D
CURVED TIP
Side View
Part
Number
Front View
Length
A
in. (mm)
Width
B
in.
(mm)
Thickness
C
in. (mm)
Except LH -0 Ties
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.172
(4.4)
.90
(23)
1.50
(38)
2.00
(51)
4.00
(102)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
1000
50000
100
1000
1000
25000
100
1000
1000
25000
100
1000
1000
10000
100
1000
1000
25000
100
1000
1000
25000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
5000
50
500
250
2500
50
500
250
2500
50
500
250
2500
50
500
100
2000
50
500
100
2000
50
500
100
2000
50
500
100
1000
50
500
100
1000
MINIATURE CROSS SECTION
BT1M-C0
BT1.5M-C0
BT2M-C0
BT4M-C0
4.0
(102)
6.3
(160)
7.9
(201)
14.2
(361)
.036
(0.9)
.095
(2.4)
.046
(1.2)
.156
(4.0)
.182
(4.6)
18
(80)
GTS, GS2B, PTS,
PPTS or STS2
INTERMEDIATE CROSS SECTION
BT1.5I-C0
BT2I-C0
BT3I-C0
BT4I-C0
6.1
(155)
8.0
(203)
11.3
(287)
14.3
(363)
.041
(1.0)
.141
(3.6)
.185
(4.7)
.248
(6.3)
.049
(1.2)
1.50
(38)
2.00
(51)
3.00
(76)
4.00
(102)
40
(178)
GTS, GS2B, PTS,
PPTS or STS2
STANDARD CROSS SECTION
BT2S-C0
BT3S-C0
BT4S-C0
8.0
(203)
12.0
(305)
15.1
(384)
.045
(1.2)
.185
(4.7)
.052
(1.3)
.220
(5.6)
.320
(8.1)
2.00
(51)
3.00
(76)
4.00
(102)
50
(222)
GTS, GS2B
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
LIGHT-HEAVY CROSS SECTION (STRAIGHT TIP)
BT2LH-L0
BT3LH-L0
BT4LH-L0
BT5LH-L0
BT6LH-L0
BT7LH-L0
BT8LH-L0
BT9LH-L0
8.7
(221)
11.8
(300)
14.9
(378)
18.1
(460)
21.2
(538)
24.4
(620)
.275
(7.0)
.065
(1.7)
.320
(8.1)
27.5
(699)
30.7
(780)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 34-35.
All part numbers shown in standard package quantities unless denoted by ‡
.520
(13.2)
2.00
(51)
3.00
(76)
4.00
(102)
5.00
(127)
6.00
(152)
7.00
(178)
8.00
(203)
9.00
(229)
120
(534)
GTH, GS4H,
GS4EH,
PPTEH, STH2,
or ST2EH
Most commonly used parts appear in BOLD.
29
DOME-TOP ® Barb Ty Heat Stabilized Cable Ties (BT Series)
• Available in Miniature, Intermediate, Standard and
Light-Heavy cross sections
• Bundle diameters up to 4.00" (102mm)
• Temperature rating: -40°F (-40°C) to 239°F (115°C)
DOME-TOP ® Barb Ty
Heat Stabilized
Nylon 6.6 —
Natural Color
B
E
A REF.
STRAIGHT TIP
C
D
CURVED TIP
Front View
Side View
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
.036
(0.9)
.156
(4.0)
.172
(4.4)
.90
(23)
18
(80)
.041
(1.0)
.185
(4.7)
.248
(6.3)
1.50
(38)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GTS, GS2B, PTS,
PPTS or STS2
—
—
1000
50000
40
(178)
GTS, GS2B, PTS,
PPTS or STS2
—
—
1000
25000
—
—
1000
10000
50
(222)
GTS, GS2B
GTH, GS4H, PTS,
PPTS, STS2
or STH2
—
—
1000
10000
—
—
1000
5000
—
—
250
2500
MINIATURE CROSS SECTION
BT1M-M39‡
4.0
(102)
.095
(2.4)
INTERMEDIATE CROSS SECTION
BT1.5I-M39‡
6.1
(155)
.141
(3.6)
STANDARD CROSS SECTION
BT2S-M39‡
BT3S-M39‡
BT4S-M39‡
.045
(1.2)
8.0
(203)
12.0
(305)
15.1
(384)
.185
(4.7)
.052
(1.3)
2.00
(51)
.220
(5.6)
.320
(8.1)
3.00
(76)
4.00
(102)
LIGHT-HEAVY CROSS SECTION (STRAIGHT TIP)
BT4LH-TL39‡
14.9
(378)
.275
(7.0)
.065
(1.7)
.320
(8.1)
.520
(13.2)
4.00
(102)
120
(534)
GTH,GS4H,
GS4EH, PPTEH,
STH2 or ST2EH
Push mount ties are used to attach a cable bundle to a surface
such as a flat panel. The anchor is easily pressed into a
pre-drilled hole and locks in place. The wings provide constant
tension when installed, creating a stable, secure fixture and
rattle-free installation.
DOME-TOP ® Barb Ty
Nylon 6.6 Winged Push
Mount Ties
B
A REF.
D
C
Part Number
Length
A
in.
(mm)
Width
B
in.
(mm)
Head
Height
D
in. (mm)
Nominal
Hole Dia.
in. (mm)
Max. Panel
Thickness
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
.041
(1.0)
.280
(7.1)
.187
(4.7)
.093
(2.4)
1.50
(38)
40
(178)
.052
(1.3)
.370
(9.4)
.250
(6.4)
.156
(4.0)
2.00
(51)
50
(222)
Thickness
C
in. (mm)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GTS, GS2B,
PTS, PPTS
or STS2
—
—
500
5000
GTS, GS2B
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
—
—
500
5000
INTERMEDIATE CROSS SECTION
BW1.5I-D
6.6
(168)
.141
(3.6)
STANDARD CROSS SECTION
BW2S-D
30
8.5
(216)
.185
(4.7)
Most commonly used parts appear in BOLD.
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 34-35.
All part numbers shown in standard package quantities unless denoted by ‡
DOME-TOP ® Barb Ty Clamp Ties
DOME-TOP ® Barb Ty
Nylon 6.6 Clamp Ties
• Used to secure a bundle to another surface
• The design allows for bundling before or after screwing clamp in place
• Available in Miniature, Intermediate, Standard and
Light-Heavy cross sections
• Bundle diameters up to 4.00" (102mm)
• Available in natural, weather resistant and heat stabilized black nylon
F
B
E
A REF.
Side View
Part Number
STRAIGHT TIP
C
D
CURVED TIP
Front View
Nominal
Length Width
Boss
Boss
Hole
Max.
Min. Loop Recommended
A
B
Thickness Height
Width
Dia.
Screw Bundle
Tensile
PANDUIT ®
in.
in.
C
D
E
F
Size
Dia.
Strength Installation Tool
Part No.
(mm)
(mm)
in. (mm) in. (mm) in. (mm) in.(mm) (Metric) in. (mm) Lbs. (N)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
100
1000
1000 50000
100
1000
1000 25000
100
1000
1000 25000
100
1000
500
10000
—
—
500
10000
100
1000
500
5000
50
500
250
2500
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
BC1MS4-M‡
BC2M-S4-M‡
4.6
(117)
8.3
(211)
.095
(2.4)
.095
(2.4)
.046
(1.2)
.046
(1.2)
.156
(4.0)
.156
(4.0)
.234
(5.9)
.234
(5.9)
.124
(3.15)
.124
(3.15)
#4
(M2.5)
#4
(M2.5)
.90
(23)
2.0
(51)
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
.041
(1.0)
.166
(4.2)
.330
(8.4)
.180
(4.57)
#8
(M4)
1.5
(38)
40
(178)
GTS, GS2B,
PTS, PPTS
or STS2
#10
(M5)
2.00
(51)
3.00
(76)
4.00
(102)
50
(222)
4.00
(102)
120
(534)
INTERMEDIATE CROSS SECTION
BC1.5I-S8-M‡
6.6
(168)
.141
(3.6)
STANDARD CROSS SECTION
BC2S-S10-C
BC3S-S10-D
BC4S-S10-C
8.5
(216)
12.5
(318)
15.6
(396)
.185
(4.7)
.052
(1.3)
.160
(4.1)
.400
(10.2)
.206
(5.2)
GTS, GS2B,
GTH, GS4H, PTS,
PPTS, STS2
or STH2
LIGHT-HEAVY CROSS SECTION (STRAIGHT TIP)
BC4LH-S25-L
15.5
(394)
.275
(7.0)
.065
(1.7)
.265
(6.7)
.520
(13.2)
.260
(6.6)
1/4
(M6)
GTH, GS4H,
GS4EH, PPTEH,
STH2 or ST2EH
DOME-TOP ® Barb Ty Weather Resistant Nylon Clamp Ties
Except Light Heavy
Part Number
Nominal
Min.
Length Width
Boss
Boss
Hole
Max.
Loop
A
B
Thickness Height
Width
Dia.
Screw Bundle Tensile
in.
in.
C
D
E
F
Size
Dia.
Strength
(mm)
(mm)
in. (mm) in. (mm) in. (mm) in. (mm) (Metric) in. (mm) Lbs. (N)
Packaging*
Recommended
PANDUIT ®
Installation
Tool Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk Bulk
Pkg. Ctn.
Qty. Qty.
100
500
1000 10000
—
—
1000 10000
100
500
1000 5000
50
500
250
STANDARD CROSS SECTION
BC2S-S10-C0
BC3S-S10-D0
BC4S-S10-C0
8.5
(216)
12.5
(318)
15.6
(396)
.185
(4.7)
.052
(1.3)
.160
(4.1)
.400
(10.2)
.206
(5.2)
#10
(M5)
2.00
(51)
3.00
(76)
4.00
(102)
50
(222)
4.00
(102)
120
(534)
GTS, GS2B,
GTH, GS4H, PTS,
PPTS, STS2
or STH2
LIGHT-HEAVY CROSS SECTION
BC4LH-S25-L0
15.5
(394)
.275
(7.0)
.065
(1.7)
.265
(6.7)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 34-35.
All part numbers shown in standard package quantities unless denoted by ‡.
.520
(13.2)
.260
(6.6)
1/4
(M6)
GTH, GS4H,
GS4EH,
PPTEH, STH2
or ST2EH
Most commonly used parts appear in BOLD.
2500
31
DOME-TOP ® Barb Ty Marker and Flag Ties (BM/BF Series)
• Used to fasten and identify bundles at the same time
• They can be marked with PANDUIT ® Marker Pens, Custom Hot
Stamping Service on page 52 or Computer Printable Labels
• Available in Miniature and Standard Cross Section
• Bundle diameters up to 4.00" (102mm)
• Available in natural and weather resistant nylon
DOME-TOP ® Barb Ty
Nylon 6.6 Marker
and Flag Ties
Part Number
Length
Width
Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
BM1M
BM2M
Max.
Bundle
Dia.
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Marker
Write-on
Area
in. (mm)
.156
(4.0)
.182
(4.6)
.29 x 1.09
(7.4) x (27.7)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
18
(80)
GTS, GS2B
PTS, PPTS
or STS2
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
18
(80)
GTS, GS2B,
PTS, PPTS
or STS2
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
50
(222)
GTS, GS2B
GTH, GS4H, PTS,
PPTS or STH2
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
100
1000
1000 25000
100
1000
1000 25000
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
100
1000
1000 25000
100
1000
1000 25000
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
BM1M-C
BM2M-C
Part Number
4.2
(107)
7.9
(201)
.095
(2.4)
Length
Width
A
B
in. (mm) in. (mm)
.046
(1.2)
.90
(23)
2.00
(51)
BF1M
BF2M
Max.
Bundle
Dia.
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Marker
Write-on
Area
in. (mm)
.046
(1.2)
.156
(4.0)
.182
(4.6)
.36 x .81
(9.1) x (20.6)
Packaging*
Bulk
Ctn.
Qty.
MINIATURE CROSS SECTION
BF1M-C
BF2M-C
4.6
(117)
8.3
(211)
.095
(2.4)
BM2S
Part Number
Length
Width
A
B
in. (mm) in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
.220
(5.6)
.320
(8.1)
.90
(23)
2.00
(51)
BM4S
Marker
Write-on
Area
in. (mm)
Max.
Bundle
Dia.
in. (mm)
.49 x .91
(12.4) x (23.1)
2.00
(51)
.50 x 2.13
(12.7) x (54.1)
4.00
(102)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
500
10000
100
1000
500
10000
STANDARD CROSS SECTION
BM2S-C
BM4S-C
32
8.0
(203)
15.1
(384)
.185
(4.7)
.045
(1.2)
.052
(1.3)
Most commonly used parts appear in BOLD.
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 34-35.
All part numbers shown in standard package quantities unless denoted by ‡
DOME-TOP ® Barb Ty Marker Ties/DURA -TY ™ Cable Ties
DOME-TOP ® Barb Ty
Nylon 6.6 Marker
Ties (con’t)
B2M2S
E
E
B
B
A
A
B3M2S
Length
A
in. (mm)
Part Number
Width
B
in.
(mm)
B4M2S
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Marker
Write-On
Area
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
50
(222)
GTS, GS2B,
GTH, GS4H, PTS,
PPTS, STS2
or STH2
Packaging*
Std.
Pkg.
Qty.*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
50
500
500
2500
50
500
250
2500
50
500
250
2500
STANDARD CROSS SECTION
B2M2S-D‡
11.5 x .91
(29.2) x (23.1)
B3M2S-TL‡
8.0
(203)
.185
(4.7)
.045
(1.2)
.220
(5.6)
.320
(8.1)
B4M2S-TL‡
1.81 x .91
(46.0) x (23.1)
2.00
(51)
2.47 x .91
(62.7) x (23.1)
• Ideal for all outdoor messenger strand applications including
telephone, cable TV, traffic signals and outside plant
power services
• Weather Resistant Acetal strap body and head
• Double stainless steel Type 302 locking barbs
• High tensile strength and high impact resistance
• Excellent chemical and moisture resistance
• 250 lbs. Minimum loop tensile strength
• Meets Telcordia TR-TSY-000789
• May be used with Stackable Cable Spacers SACS50-T100
(see page 107)
DURA-TY ™ Weather
Resistant Cable Ties
A
C
D
E
Part
Number
Description
Length
(A)
in. (mm)
B
Strap
Head
Width Thickness Height
(B)
(C)
in.
in. (mm) in. (mm)
(mm)
Head
Width
in.
(mm)
.490
(12.4)
.718
(18.2)
Max
Min. Loop Recommended
Bundle
Tensile
PANDUIT ®
Dia.
Strength Installation Tool
Part No.
in. (mm) N (Lbs.)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
50
1000
—
—
25
500
—
—
1
20
—
—
EXTRA-HEAVY CROSS SECTION
DT4EH-L0
DT8EH-Q0
Cable
Tie
13.5
(343)
27.0
(686)
DTREH-LR0
50' Reel of
Strapping
600.0
(15,240)
DTHEH-Q0
Bag of 25 Cable
Tie Heads
—
DURA -TY ™ Kit 50 ft.
Reel of Strapping
600.0
(15,240)
DTKEH-0
.500
(12.7)
—
.500
(12.7)
.059
(1.5)
—
—
.490
(12.4)
.718
(18.2)
—
.059
(1.5)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see pages 34-35.
All part numbers shown in standard package quantities unless denoted by ‡
3.87
(98)
8.00
(203)
250
(1112)
GTH, GS4H,
ST2EH
or GS4EH
As
Needed
—
—
25
500
—
—
As
Needed
250
(1112)
1
20
—
—
Most commonly used parts appear in BOLD.
33
™
Part Number Suffix Codes for all DOME-TOP ® Barb Ty and DURA-TY Cable Ties
Part Number System (Example of BT1M-C)
BT
1
M
Part Description:
BT = Barb Ty
BC = Barb Clamp
BF = Barb Flag
BM = Barb Marker
BW = Barb Wing
DT = DU RA-TY ™
Size:
Approximate
Maximum Bundle
Diameter in Inches
Cross Section:
M = Miniature
I = Intermediate
S = Standard
LH = Light-Heavy
EH = Extra-Heavy
—
Screw Hole Size:
(Clamp Ties Only)
-S4 = #4 (M2.5)
-S6 = #6 (M3)
-S8 = #8 (M4)
-S10 = #10 (M5)
-S25 = 1/4 (M6)
C
Package Size:
Q = 25
L = 50
C = 100
TL = 250
D = 500
M = 1000
LR = 50' Reel
0 = DT Kit
Color:
See Material/Color
chart. Not all ties
available in all colors.
Material/Color Chart
Material/Color
Nylon 6.6 — Natural (See Note)
Weather Resistant Nylon 6.6 —
Black
Nylon 6.6 — Brown
Nylon 6.6 — Red
Nylon 6.6 — Orange
Nylon 6.6 — Yellow
Nylon 6.6 — Green
PANDUIT ® Mil Spec
Suffix**
Suffix*
✔
9
0
N/A
1
2
3
4
5
1
2
3
4
5
Material/Color
Nylon 6.6 — Blue
Nylon 6.6 — Purple
Nylon 6.6 — Gray
Nylon 6.6 — White
Nylon 6.6 — Telephone Gray
Nylon 6.6 — Black
Heat Stabilized Nylon 6.6 — Black
Heat Stabilized Nylon 6.6 — Natural
PANDUIT ® Mil Spec
Suffix**
Suffix*
6
6
7
7
8
8
10
N/A
14
N/A
20
N/A
30
N/A
39
N/A
* NOTE: ✔ designates PANDUIT ® standard Natural Nylon 6.6 color/material. No suffix required in part number.
** NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368).
Part
Number
Standard Packaging
Natural
Nylon
Available Color/
6.6
Material (Suffix)
BC2S-S10-C
✔
0
BC4S-S10-C
BC4LH-S25-L
BF1M-C
BF2M-C
BM1M-C
BM2M-C
BM2S-C
BM4S-C
BT1M-C
BT1.5M-C
BT2M-C
BT4M-C
BT1.5I-C
BT2I-C
BT3I-C
BT4I-C
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
0
0
34
0, 30
0
0
0
0
0
0
0
Most commonly used parts appear in BOLD.
Bulk Packaging
Part
Number
BC1M-S4-M
BC2M-S4-M
BC1.5I-S8-M
BC2S-S10-D
BC3S-S10-D
BC4S-S10-D
BC4LH-S25-TL
BF1M-M
BF2M-M
BM1M-M
BM2M-M
BM2S-D
BM4S-D
BT1M-M
BT1.5M-M
BT2M-M
BT4M-M
BT1.5I-M
BT2I-M
BT3I-M
BT4I-M
Natural
Nylon
6.6
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Available Color/
Material (Suffix)
0
0
0
0
0
0, 30
0
0
0
0
0
0
0
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 30, 39
0, 30
0, 2, 3, 4, 5, 6, 8, 30
0
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 30, 39
0, 30
0, 30
0, 14
Part Number Suffix Codes for all DOME-TOP ® Barb Ty and DURA-TY ™ Cable Ties
Standard Packaging
Part
Number
BT2S-C
BT3S-C
BT4S-C
BT2LH-L
BT3LH-L
BT4LH-L
BT5LH-L
BT6LH-L
BT7LH-L
BT8LH-L
BT9LH-L
1
DTHEH-Q
DTKEH
1
DTREH-LR
1
DT4EH-L
1
DT8EH-Q
1
Natural
Nylon 6.6
✔
0
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Available Color/
Material (Suffix)
0, 2
0
0
0
0
0
0
0
0
0
Bulk Packaging
Part
Number
BT2S-M
BT3S-M
BT4S-M
BT2LH-TL
BT3LH-TL
BT4LH-TL
BT5LH-C
BT6LH-C
BT7LH-C
BT8LH-C
BT9LH-C
BW1.5I-D
BW2S-D
B2M2S-D
B3M2S-TL
B4M2S-TL
Natural
Available Color/
Nylon 6.6
Material (Suffix)
✔
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 20,
30, 39
✔
0, 30, 39
✔
0, 2, 3, 4, 5, 6, 7, 8, 10, 30, 39
✔
0
✔
0
✔
0, 30, 39
✔
0
✔
0
✔
0
✔
0
✔
0
✔
✔
0
✔
0
✔
0
✔
0
0
0
0
0
0
NOTE 1: DURA-TY ™ Weather Resistant Acetal Strap Body and Head.
Most commonly used parts appear in BOLD.
35
CONTOUR-TY ® Cable Ties
• Head designed for no protrusion of cut-off tie
• Tie configuration limits exposure to sharp edges to protect
adjacent cables and installers arms and hands
• Low profile head reduces overall bundle size
• Locking wedge is fully enclosed to insure consistent
strength and lasting performance
• Fully rounded edges on head and strap protect cable
insulation/jacket
• Rounded tip and aggressive grip for faster initial threading
CONTOUR-TY ® Cable Ties
Nylon 6.6 and Weather
Resistant Nylon 6.6
B
E
A
C
D
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Max.
Min.
Head Bundle Loop
Width
Dia.
Tensile
E
in.
Strength
in. (mm) (mm) Lbs. (N)
Packaging*
Recommended
PANDUIT ®
Installation Tool
Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
1000
50000
—
—
1000
50000
2.00
(51)
—
—
1000
25000
1.50
(38)
—
—
1000
25000
—
—
1000
10000
4.00
(102)
—
—
1000
10000
2.00
(51)
—
—
1000
10000
—
—
1000
5000
—
—
1000
5000
—
—
500
5000
—
—
250
2500
—
—
100
2000
MINIATURE CROSS SECTION
CBR1M-M‡
CBR1M-M0‡
CBR1.5M-M‡
CBR1.5M-M0‡
CBR2M-M‡
CBR2M-M0‡
4.1
(104)
5.6
(142)
.038
(1.0)
.098
(2.5)
7.2
(183)
.042
(1.1)
.195
(5.0)
.208
(5.3)
.209
(5.3)
1.00
(25)
1.50
(38)
18
(80)
GTS, GS2B, PTS
or PPTS
INTERMEDIATE CROSS SECTION
CBR1.5I-M‡
CBR1.5I-M0‡
CBR3I-M‡
CBR3I-M0‡
CBR4I-M‡
CBR4I-M0‡
5.9
(150)
10.4
(264)
.040
(1.0)
.140
(3.6)
13.6
(345)
.052
(1.3)
.250
(6.4)
.250
(6.4)
.262
(6.7)
3.00
(76)
40
(178)
GTS, GS2B, PTS
or PPTS
STANDARD CROSS SECTION
CBR2S-M‡
CBR2S-M0‡
CBR3S-M‡
CBR3S-M0‡
CBR4S-M‡
CBR4S-M0‡
7.6
(193)
10.8
(274)
.044
(1.1)
.190
(4.8)
14.0
(356)
.052
(1.3)
.290
(7.1)
.332
(8.4)
3.00
(76)
50
(222)
GTS, GS2B, PTS
or PPTS
4.00
(102)
HEAVY-STANDARD CROSS SECTION
CBR2HS-D‡
CBR2HS-D0‡
8.0
(203)
.250
(6.4)
.058
(1.4)
.326
(8.2)
.388
(9.9)
.300
(7.6)
.070
(1.8)
.400
(10.2)
.490
(12.4)
2.00
(51)
85
(378)
GTH or GS4H
120
(534)
GTH, GS4H
or PPTEH
LIGHT-HEAVY CROSS SECTION
CBR4LH-TL‡
CBR4LH-TL0‡
CBR6LH-C‡
CBR6LH-C0‡
36
14.6
(371)
20.9
(531)
Most commonly used parts appear in BOLD.
4.00
(102)
6.00
(152)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 39.
All part numbers shown in standard package quantities unless denoted by ‡.
BELT-TY ™ In-Line Cable Ties
BELT-TY ™ In-Line Cable Ties Nylon 6.6
• Protects adjacent cables and protects
workers arms and hands
• Avoids snags and reduces overall bundle size
• No sharp edges in contact with cable insulation
• Easy to grip for assembly
• Positive grip when threading tie
• Material: Nylon 6.6
• Head designed for no protrusion of cut-off tie
• Low profile head (35% lower than conventional
90° entry cable ties)
• Fully rounded edges on head and strap
• Rounded tip and aggressive grip
• Finger grip shaped head
• Curved tip
B
E
A
C
D
• Parallel-entry cable ties that thread like a belt (at 180°) with the same
performance of conventional (90° entry) cable ties
• The BELT -TY ™ In-Line Cable Tie design reduces the long cut-off
danger of an incorrectly applied conventional cable tie
Part Number
Length
A
in. (mm)
Width
B
in. (mm)
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
.044
(1.1)
.110
(2.8)
.190
(4.8)
1.10
(28)
18
(80)
.052
(1.3)
.130
(3.3)
.260
(6.6)
1.38
(35)
30
(133)
.316
(8.0)
1.88
(48)
3.00
(76)
4.00
(102)
50
(222)
4.00
(102)
6.00
(152)
120
(534)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GTS, GS2B,
PTS or PPTS
—
—
1000
50,000
GTS, GS2B,
PTS or PPTS
—
—
1000
25,000
—
—
1000
10,000
—
—
1000
5000
—
—
1000
5000
—
—
250
2500
—
—
100
500
MINIATURE CROSS SECTION
ILT1M-M‡
4.8
(122)
.098
(2.5)
INTERMEDIATE CROSS SECTION
ILT1.5I-M‡
5.4
(137)
.142
(3.6)
STANDARD CROSS SECTION
ILT2S-M‡
ILT3S-M‡
ILT4S-M‡
8.3
(211)
11.5
(292)
14.7
(373)
.190
(4.8)
.052
(1.3)
.140
(3.6)
GTS, GS2B,
GTH, GS4H,
PTS or PPTS
LIGHT-HEAVY CROSS SECTION
ILT4LH-TL‡
ILT6LH-C‡
.
14.8
(376)
21.2
(538)
.300
(7.6)
.075
(1.9)
.250
(6.4)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 39.
All part numbers shown in standard package quantities unless denoted by ‡.
.475
(12.1)
GTH, GS4H
or PPTEH
Most commonly used parts appear in BOLD.
37
IN-LINE Nylon 6.6 Cable Ties
IN-LINE Weather Resistant
Nylon 6.6 Cable Ties
• Wide tie body and high tensile strength are
ideal for any application including
playground equipment
• For playground installations, the head is
inverted and the body is captured between the
tie and foam for safety
• Flexible, easy to handle and easily installed
without special tools
• Available in 13 UV weather resistant colors for
color coordination and UV stability
B
Colors can be used to install foam
padding for playground applications.
UV Black can be used in any
outdoor application.
E
A REF.
C
D
Part Number
Description
Length
Width Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.*
Bulk
Ctn.
Qty.*
Cable Tie Colors
IT9100-CUV2‡
UV Red
—
—
100
1000
IT9100-CUV4‡
UV Yellow
—
—
100
1000
IT9100-CUV4A‡
UV Butterscotch
—
—
100
1000
IT9100-CUV5A‡
UV Green
—
—
100
1000
IT9100-CUV5B‡
UV Hunter Green
—
—
100
1000
IT9100-CUV6‡
UV Dark Blue
—
—
100
1000
IT9100-CUV6A‡
UV Light Blue
—
—
100
1000
IT9100-CUV6B ‡
UV Cobalt Blue
—
—
100
1000
IT9100-CUV7A‡
UV Purple
—
—
100
1000
IT9100-CUV8‡
UV Silver
—
—
100
1000
IT9100-CUV11‡
UV Teal
—
—
100
1000
IT9100-CUV16B ‡
UV Pink
—
—
100
1000
IT9115-CUV2‡
UV Red
—
—
100
1000
IT9115-CUV4‡
UV Yellow
—
—
100
1000
IT9115-CUV4A ‡
UV Butterscotch
—
—
100
1000
IT9115-CUV5A‡
UV Green
—
—
100
1000
IT9115-CUV5B‡
UV Hunter Green
—
—
100
1000
IT9115-CUV6‡
UV Dark Blue
—
—
100
1000
IT9115-CUV6A‡
UV Light Blue
—
—
100
1000
IT9115-CUV6B‡
UV Cobalt Blue
—
—
100
1000
IT9115-CUV7A‡
UV Purple
—
—
100
1000
IT9115-CUV8‡
UV Silver
—
—
100
1000
IT9115-CUV11‡
UV Teal
—
—
100
1000
IT9115-CUV16B‡
UV Pink
—
—
100
1000
1.57
(40)
—
—
100
1000
2.58
(65)
—
—
100
1000
—
—
100
1000
—
—
100
1000
5.91
(150)
—
—
100
1000
9.84
(250)
—
—
100
1000
14.1
(358)
15.3
(389)
.350
(8.9)
.350
(8.9)
.065
(1.7)
.065
(1.7)
.300
(7.6)
.300
(7.6)
.556
(14.1)
.556
(14.1)
3.94
(100)
4.53
(115)
124
(550)
124
(550)
Black Cable Ties
IT940-C0‡
UV Black
6.8
(173)
IT965-C0‡
UV Black
10.1
(257)
IT9100-C0‡
UV Black
14.1
(358)
IT9115-C0‡
UV Black
15.3
(388)
IT9150-C0‡
UV Black
20.1
(511)
IT9250-C0‡
38
UV Black
33.0
(838)
Most commonly used parts appear in BOLD.
.065
(1.7)
.300
(7.6)
.350
(8.9)
.556
(14.1)
.075
(1.9)
.320
(8.1)
3.94
(100)
4.53
(115)
124
(550)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 39.
All part numbers shown in standard package quantities unless denoted by ‡.
Part Number Suffix Code for All Parallel Entry Cable Ties
Part Number System (Example of ILT1M-M)
ILT
1
Part Description:
CBR = CON TOU R-TY ®
ILT = BELT -TY ™ In-Line Tie
IT = In-Line Tie
M
Size:
Approximate
Maximum Bundle
Diameter in
Inches
—
Cross Section:
M = Miniature
I = Intermediate
S = Standard
HS = Heavy-Standard
LH = Light-Heavy
M
Package Size:
C = 100
TL = 250
D = 500
M = 1000
Color:
See Material/Color
chart. Not all ties
available in all colors.
Material/Color Chart
Material/Color
Nylon 6.6 — Natural (See Note)
Weather Resistant Nylon 6.6 —
Black
PANDUIT ® Mil Spec
Suffix*
Suffix**
✔
9
0
N/A
Ultraviolet Red
Ultraviolet Yellow
Ultraviolet Butterscotch
Ultraviolet Green
Ultraviolet Hunter Green
UV2
UV4
UV4A
UV5A
UV5B
N/A
N/A
N/A
N/A
N/A
Material/Color
Ultraviolet Dark Blue
Ultraviolet Light Blue
Ultraviolet Cobalt Blue
Ultraviolet Purple
Ultraviolet Silver
Ultraviolet Teal
Ultraviolet Pink
Ultraviolet Tan
PANDUIT ® Mil Spec
Suffix**
Suffix*
UV6
N/A
UV6A
N/A
UV6B
N/A
UV7A
N/A
UV8
N/A
UV11
N/A
UV16B
N/A
UV18
N/A
* NOTE: ✔ designates PANDUIT ® standard Natural Nylon 6.6 color.material. No suffix required in part number.
** NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368).
Part
Number
ILT2S-C
ILT3S-C
ILT4S-C
Standard Packaging
Natural
Available Color/
Nylon 6.6
Material (Suffix)
✔
✔
✔
0
0
0
Part
Number
CBR1M-M
CBR1.5M-M
CBR2M-M
CBR1.5I-M
CBR3I-M
CBR4I-M
CBR2S-M
CBR3S-M
CBR4S-M
CBR2HS-D
CBR4LH-TL
CBR6LH-C
ILT1M-M
ILT1.5I-M
ILT2S-M
ILT3S-M
ILT4S-M
ILT4LH-TL
ILT6LH-C
IT940-C
IT965-C
IT9100-C
IT9115-C
IT9150-C
IT9250-C
Bulk Packaging
Natural
Available Color/
Nylon 6.6
Material (Suffix)
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0, 39
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
✔
0
0
0
0, UV2, UV4, UV6, UV6A,
UV7A, UV8, UV16B
0, UV2, UV4, UV4A, UV5A,
UV5B, UV6, UV6A, UV6B,
UV7A, UV8, UV11, UV16B,
UV18
0
0
Most commonly used parts appear in BOLD.
39
TAK -TY ® Hook & Loop Cable Ties
TAK-TY ® Hook & Loop
Cable Ties
• Releasable and reusable
hundreds of times
• No risk of over tensioning
and damaging high
performance cabling
• No installation tool needed
• No waste — excess can be
wrapped around bundle
• Cinch ties — Pass hook
portion through plastic cinch
ring. Pull end of tie against
ring to tension. Secure hook
portion against loop portion
of tie body to fasten
• Loop and Strip ties have
hooks on one side and
loops on the other, so it
adheres to itself; wrap
around bundle and secure
end of tie on the body
• HLM-15R can be used with
ABM3H-A-L, ABM4H-A-L,
TM3S8-C, TM3S10-C and
TM3S25-C mounts
• Loop and Strip ties (in black
and maroon) are UL Listed
for use in air handling
spaces per NEC section
300-22 (c) and (d) and are
UL94V-2 flame rated
HLC Series
HLS/HLSP/HLM Series
CINCH TIES — CINCH RING PROVIDES EXTRA STRENGTH AND BUNDLE TIGHTNESS
Length Width
Part Number in. (mm) in. (mm)
HLC3S-X0
12.0
(305)
.750
(19.1)
HLC5S-X0
18.0
(457)
Thickness
in. (mm)
Head
Width
in. (mm)
.10
(2.5)
1.10
(27.9)
Min.
Bundle
Dia.
in. (mm)
2.00
(51)
3.00
(76)
Max.
Bundle
Dia.
in. (mm)
3.00
(76)
5.00
(127)
Min. Loop
Tensile
Strength*
Lbs. (N)
50
(222)
Packaging**
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
10
100
10
100
LOOP TIES — SLOT ALLOWS FOR PRE-WRAPPING OF BUNDLES
Length Width
Part Number in. (mm) in. (mm)
HLT2I-X0
8.0
(203)
.50
(12.7)
HLT3I-X0
12.0
(305)
Thickness
in. (mm)
Head
Width
in. (mm)
.10
(2.5)
1.00
(25.4)
Min.
Bundle
Dia.
in. (mm)
.25
(6)
.25
(6)
Max.
Bundle
Dia.
in. (mm)
1.91
(49)
3.18
(81)
.25
(6)
.25
(6)
1.91
(49)
3.18
(81)
Min. Loop
Tensile
Strength*
Lbs. (N)
40
(178)
Packaging**
Std.
Pkg.
Qty.
10
Std.
Ctn.
Qty.
100
10
100
10
100
10
100
UL LISTED LOOP TIES ** — LARGER
HLTP2I-X12
8.0
(203)
12.0
(305)
HLTP3I-X12
.50
(12.7)
.10
(2.5)
1.00
(25.4)
40
(178)
STRIP TIES — ROLLS PERFORATED IN CONVENIENT 6", 12" AND 18" STRIPS
Length
in.
(mm)
6.0
(152)
12.0
(305)
18.0
(457)
Part Number
HLS1.5S-X0
HLS3S-X0
HLTP/HLSP Only
HLT/HLTP Series
HLS5S-X0
Width
in.
(mm)
Thickness
in. (mm)
.750
(19.1)
.10
(2.5)
Head
Width
in. (mm)
—
Min.
Bundle
Dia.
in. (mm)
.25
(6)
Max.
Bundle
Dia.
in. (mm)
1.50
(38)
3.20
(81)
5.00
(127)
Min. Loop
Tensile
Strength*
Lbs. (N)
50
(222)
Packaging**
Std.
Pkg.
Qty.
10
Std.
Ctn.
Qty.
100
10
100
10
100
10
100
10
100
10
100
UL LISTED STRIP TIES ** — LARGER
Color Chart
Color
Part
Number
Suffix
Example
Black
0
HLT2I-X0
Red
2
HLT2I-X2
Orange
3
HLT2I-X3
Yellow
4
HLT2I-X4
Green
5
HLT2I-X5
Blue
6
HLT2I-X6
Gray
8
HLT2I-X8
White
10
HLT2I-X10
Maroon
12
HLTP2I-X12
HLSP1.5S-X12
6.0
(152)
HLSP3S-X12
12.0
(305)
18.0
(457)
HLSP5S-X12
.750
(19.1)
.10
(2.5)
—
.25
(6)
1.50
(38)
3.20
(81)
5.00
(127)
50
(222)
15' & 75' ROLLS — CAN BE CUT TO DESIRED LENGTH, ELIMINATING WASTE
Part Number
Length Width
in. (mm) in. (mm)
HLM-15R0
180.0
(4572)
.33
(8.4)
HLS-15R0
180.0
(4572)
.750
(19.1)
900.0
(22,860)
.750
(19.1)
HLS-75R0
Thickness
in. (mm)
Head
Width
in. (mm)
Min.
Bundle
Dia.
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength*
Lbs. (N)
18
(80)
.10
(2.5)
—
.25
(6)
Various
50
(222)
Packaging**
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
1
10
1
10
1
10
*Minimum 2" overlap required to achieve loop tensile rating (HLC, HLT, HLS, HLM series).
**Available in -0 (Black) rated 18lbs. (80N).
40
Most commonly used parts appear in BOLD.
**Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 42 .
All part numbers shown in standard package quantities unless denoted by ‡.
TAK -TY ® Hook & Loop Grommet Cinch Ties
TAK-TY ® Hook & Loop
Grommet Cinch Ties
Part Number
• Sturdy brass grommet and washer provides strength and high
visibility for mounting in poor lighting conditions
• 1/4" (M6) diameter mounting hole fits drywall screws up to
#12 screw size
• Grommet allows for mounting of the cinch ties prior to cable
installation for easier handling of cable bundles with tie
pre-positioned and anchored
• No sharp edges to damage cables
• Releasable and Reusable
Length
Width Thickness
in. (mm) in. (mm) in. (mm)
Head
Width
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)*
Packaging**
Std.
Pkg.
Qty.**
Std.
Ctn.
Qty.**
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
GCTC SERIES — GROMMET CINCH TIE CENTER MOUNT (Centers bundle over mounting point)
GCTC3S-X0
GCTC5S-X0
12.0
(305)
18.0
(457)
.750
(19.1)
.10
(2.5)
1.10
(27.9)
3.00
(76.2)
30
(133)
10
100
—
—
5.00
(127)
50
(222)
10
100
—
—
GCTE SERIES — GROMMET CINCH TIE END MOUNT (Offsets bundle next to mounting point)
GCTE2S-X0
GCTE4S-X0
10.5
(267)
16.5
(419)
.750
(19.1)
.10
(2.5)
1.10
(27.9)
2.20
(55.8)
4.10
(104.1)
50
(222)
10
100
—
—
10
100
—
—
*Tensile Strength achieved with 2" overlap.
**Order the number of pieces required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡.
Most commonly used parts appear in BOLD.
41
Part Number Suffix Codes for All Hook & Loop Cable Ties
Part Number System (Example of HLC3S-X0)
HLC
Part Description:
HL = Hook & Loop
HLC = H&L Cinch Tie
HLT = H&L Tie
HLTP* = H&L Tie Plenum
HLS = H&L Strip
HLSP* = H&L Strip Plenum
HLM = H&L Strip Miniature
GCT = Grommet Cinch Tie
3
S
Size:
Approximate
Maximum
Bundle
Diameter in
Inches
—
Cross Section:
I = Intermediate
S = Standard
X
Package Size:
X = 10
15R = 15' Roll
75R = 75' Roll
0
Color:
See Material/
Color chart. Not
all ties available in
all colors.
Material/Color Chart
Color
Black
Red
Orange
Yellow
Green
Part
Number
GCTC3S-X
GCTC5S-X
GCTE2S-X
GCTE4S-X
HLC3S-X
HLC5S-X
HLM-15R
HLS-15R
HLS-75R
HLS1.5S-X
HLS3S-X
HLS5S-X
HLT2I-X
HLT3I-X
*HLSP1.5S-X
*HLSP3S-X
*HLSP5S-X
*HLTP2I-X
*HLTP3I-X
PANDUIT ®
Suffix
0
2
3
4
5
Color
Blue
Gray
White
Maroon
Standard Packaging
Available Color/
Material (Suffix)
0
0
0
0
0
0
0, 2, 3, 4, 5, 6, 8, 10
0, 2, 3, 4, 5, 6, 8, 10
0, 2, 3, 4, 5, 6, 8, 10
0, 2, 3, 4, 5, 6, 8, 10
0, 2, 3, 4, 5, 6, 8, 10
0, 2, 3, 4, 5, 6, 8, 10
0, 2, 3, 4, 5, 6, 8, 10
0, 2, 3, 4, 5, 6, 8, 10
0,12
0,12
0,12
0,12
0,12
*HLSP and HLTP are unique Hook & Loop style ties that are UL Listed for use in air-handling spaces
per NEC section 300-22 (c) and (d) and are UL94V-2 flame rated. Available in Black (-X0) and
Maroon (-X12).
42
Most commonly used parts appear in BOLD.
PANDUIT ®
Suffix
6
8
10
12
STA-STRAP ® Cable Ties (SSC/SST Series)
STA-STRAP ® Nylon 6.6
Cable Ties
• STA -STRAP ® Cable Ties — Use for normal bundling and
through-panel applications
• STA -STRAP ® Clamp Ties — Only clamp that can be pre-mounted
before tying bundle
• Low profile head for use in compact areas
• Two piece design provides low thread force to reduce installer fatigue
• Lower weight than comparable one-piece ties
• Releasable (prior to final tensioning and cut-off) —
Helpful in assembly
SSC Series
B
E
E
A
C
D
ALTERNATE HEAD
DESIGN - SSC2S ONLY
SST Series
B
E
A
C
D
STA-STRAP ® Clamp Head Cable Ties — SSC Series
Part Number
Boss
Length
Width Thickness Height
A
B
C
D
in. (mm) in. (mm) in. (mm) in. (mm)
Boss
Max.
Width Bundle
E
Dia.
in. (mm) in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Screw
Size
Packaging*
Recommended
PANDUIT ®
Installation
Tool Part No.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
STANDARD CROSS SECTION
SSC2S-S10-C
7.4
(187)
.180
(4.6)
.045
(1.2)
.310
(7.9)
.430
(10.9)
1.75
(45)
50
(222)
#10
(M5)
GTS, GS2B, GTH,
GS4H, PTS
or PPTS
100
100
1000
1000
.065
(1.5)
.460
(11.7)
.53
(13.5)
4.00
(102)
120
(534)
1/4
(M6)
GTH, GS4H,
GS4EH or PPTEH
50
500
500
2500
HEAVY CROSS SECTION
SSC4H-S25-L
15.6
(395)
.300
(7.6)
STA-STRAP ® Cable Ties — SST Series
Part Number
Length
A
in. (mm)
Width
Thickness
B
C
in. (mm) in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
.150
(3.8)
.175
(4.5)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
18
(80)
GTS, GS2B,
PTS or PPTS
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
1000
50000
100
1000
1000
50000
100
1000
1000
25000
100
1000
1000
25000
3.00
(76)
100
1000
1000
10000
1.75
(45)
100
1000
1000
15000
100
1000
1000
10000
100
1000
1000
5000
—
—
500
2500
—
—
500
2000
MINIATURE CROSS SECTION
SST1M-C
SST1.5M-C
4.0
(102)
5.5
(140)
.095
(2.4)
.035
(.9)
.037
(.9)
.78
(20)
1.25
(32)
INTERMEDIATE CROSS SECTION
SST1.5I-C
5.3
(137)
SST2I-C
8.1
(206)
SST3I-C
.037
(.9)
.135
(3.4)
11.0
(279)
.040
(1.0)
1.25
(32)
.210
(5.3)
.240
(6.1)
2.00
(50)
40
(178)
GTS, GS2B,
PTS or PPTS
STANDARD CROSS SECTION
SST2S-C
SST3S-C
SST4S-C
6.7
(172)
11.0
(279)
.045
(1.2)
.180
(4.6)
15.0
(381)
.048
(1.2)
.250
(6.4)
.310
(7.9)
.253
(6.4)
.350
(8.9)
.325
(8.3)
.460
(11.7)
3.00
(76)
50
(222)
GTS, GS2B, GTH,
GS4H, PTS, PPTS,
STS2 or STH2
4.00
(102)
HEAVY CROSS SECTION
SST4H-D‡
SST8H-D‡
14.8
(376)
27.5
(699)
.300
(7.6)
.067
(1.7)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 45.
All part numbers shown in standard package quantities unless denoted by ‡.
4.00
(102)
8.00
(203)
120
(534)
GTH, GS4H,
GS4EH or PPTEH
Most commonly used parts appear in BOLD.
43
STA-STRAP ® Cable Ties (SSPM Series)
Three Easy Steps...
STA -STRAP ® Chassis/Panel Mount Tie —
Weather Resistant Heat Stabilized Nylon 6.6
1
Insert tip end of STA-STRAP ® cable tie
through the correct size pre-drilled hole
in the panel.
Applications:
• Run cable and hose along
truck frame rails
• Secure a bundle under a
chassis assembly
• Manage wire harnesses in
the cab and sleeper
• Use a through-hole in
frame/chassis to mount
2
Wrap cable tie around the bundle
and insert the tip end back through
the hole and head of the cable tie.
3
Solution:
PANDUIT ® STA -STRAP ® Chassis Mount Ties are uniquely designed to secure a bundle directly to a chassis or panel utilizing
a through-hole.
Pull tip end until STA-STRAP ® cable tie
is snug on bundle. Tension and cut off
excess portion with PANDUIT ® cable
tie installation tool.
Features:
• Eliminates the need for separate fasteners to reduce costs
and decrease installation time
• Remains adjustable and releasable until tie is tensioned
and cut-off
• Installs easily with PANDUIT ® hand-operated tools
• Engages clearance hole with optional centering pilot
(2 designs) to prevent tie from shifting or abrading during
vehicle operation
B
• Optional Long
Centering Pilot
• Pilot ears protect
strap body
from clearance
hole edges
A REF.
OPTICAL CENTERING PILOT
To ensure coverage of hole up to .70" (18mm)
C
Without Pilot
With Pilot
D
With Long
Centering Pilot
HEAVY CROSS SECTION
Part Number
D
A
B
C
Head
Length
Width Thickness Height
in. (mm) in. (mm) in. (mm) in. (mm)
Recommended
Panel Hole
Dia.
in. (mm)
Maximum
Bundle
Diameter
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation Tool
Part No.
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
50
2500
250
2500
50
2500
250
2500
50
2500
250
2500
50
2500
250
2500
—
—
250
2500
WITHOUT PILOT
SSPM2.5H-L300
SSPM4H-L300
10.1
(257)
14.8
(376)
.30
(7.6)
.062
(1.6)
.248
(6.3)
.316 to.820
(8.0 to 21)
2.76
(70)
4.00
(102)
120
(534)
GTH, GS4H,
GS4EH, PPTEH,
STH2
or ST2EH
10.1
(257)
14.8
(376)
.30
(7.6)
.062
(1.6)
.248
(6.3)
.440 to.820
(11.2 to 21)
2.76
(70)
4.00
(102)
120
(534)
GTH, GS4H,
GS4EH, PPTEH,
STH2
or ST2EH
.062
(1.6)
.248
(6.3)
.440 to.820
(11.2 to 21)
4.00
(102)
120
(534)
WITH PILOT
SSPM2.5HP-L300
SSPM4HP-L300
WITH LONG CENTERING PILOT
SSPM4HLP-TL300‡
44
14.8
(376)
.30
(7.6)
Most commonly used parts appear in BOLD.
GTH, GS4H,
GS4EH,
PPTEH, STH2
or ST2EH
*Order the number of pieces required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡.
Part Number Suffix Codes for All STA-STRAP ® Cable Ties
Part Number System (Example of SST1M-C)
SST
1
Part Description:
SST = STA-STRAP ® Tie
SSC = STA-STRAP ® Clamp
SSPM = STA-STRAP ® Panel Mount
SSB = STA-STRAP ® Bow-Ty
SSM = STA -STRAP ® Marker
Size:
Approximate
Maximum Bundle
Diameter in
Inches
M
C
—
Cross Section:
M = Miniature
I = Intermediate
S = Standard
LH = Light-Heavy
H = Heavy
HH = Heavy Head
Screw Hole Size:
(Clamp Ties Only)
-S6 = #6 (M3)
-S10 = #10 (M5)
-S25 = 1/4 (M6)
Package Size:
L = 50
C =100
TL = 250
D = 500
M = 1000
Color:
See
Material/
Color chart.
Not all ties
available in
all colors.
Material/Color Chart
PANDUIT ® Mil Spec
Suffix**
Material/Color
Suffix*
Nylon 6.6 — Natural (see note)
✔
9
0
N/A
Weather Resistant Nylon 6.6 —
Black
Nylon 6.6 — Black
20
N/A
PANDUIT ® Mil Spec
Suffix**
Suffix*
30
N/A
300
N/A
Material/Color
Heat Stabilized Nylon 6.6 — Black
Heat Stabilized Weather Resistant
Nylon 6.6 — Black
*NOTE: ✔ designates PANDUIT ® standard Natural Nylon 6.6 color.material. No suffix required in part number.
**NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368).
Part
Number
SSPM2.5H-L
SSPM2.5HP-L
SSPM4H-L
SSPM4HP-L
Standard Packaging
Natural
Nylon
Available Color/
6.6
Material (Suffix)
300
300
300
300
SSC2S-S10-C
SSC2S-S6-C
SSC4S-S10-C
SSC4H-S25-L
SSM2S-C
✔
✔
✔
✔
✔
SST1M-C
SST1.5M-C
SST1.5I-C
SST2I-C
SST3I-C
SST4I-C
✔
✔
✔
✔
✔
✔
0
SST2S-C
SST3S-C
SST4S-C
✔
✔
✔
0
0
0
SST4H-L
✔
0
SST8H-L
SSB2S-C
✔
✔
0
0
Bulk Packaging
Part
Number
SSPM2.5H-TL
SSPM2.5HP-TL
SSPM4H-TL
SSPM4HP-TL
SSPM4HLP-TL
SSC2S-S10-M
SSC2S-S6-M
SSC4S-S10-M
SSC4H-S25-D
SSM2S-D
SSM4S-D
SST1M-M
SST1.5M-M
SST1.5I-M
SST2I-M
SST3I-M
SST4I-M
SST1.5S-M
SST2S-M
SST3S-M
SST4S-M
SST2H-D
SST4H-D
SST4HH-D
SST8H-D
SSB2S-M
Natural
Nylon 6.6
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Available Color/
Material (Suffix)
300
300
300
300
300
0, 30
0
0
0
0
0, 20, 30
0, 20, 30
0
0, 20
0
0
0
0, 20, 30
0, 20, 30
0, 2, 30
0
0, 30
30
0, 30
0, 30
Most commonly used parts appear in BOLD.
45
Specialty Ties
PANDUIT ® Stud
Mounted Heat
Stabilized Nylon 6.6
Cable Ties
Base portion pushes onto a threaded stud and the tie portion wraps
around the bundle. The wire bundle is centered over the stud.
B
A REF.
C
D
Except PLST4H
Part Number
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Recommended
Stud Size
in. (mm)
.19
(4.8)
.050
(1.3)
.41
(10.5)
10-24
(5)
.300
(7.6)
.075
(1.9)
.265
(6.7)
1/4-20
(6)
Length
Width
A
B
in. (mm) in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
50
(222)
GTS, GS2B
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
500
5000
—
—
500
5000
—
—
250
2500
STANDARD CROSS SECTION
PLST30SC-D30‡
PLST50SC-D30‡
5.74
(146)
8.14
(207)
1.18
(30)
1.97
(50)
HEAVY CROSS SECTION
PLST4HS25-TL300‡
15.3
(389)
Ladder Style Stud
Mounted Cable Tie
Heat Stabilized
Nylon 6.6
4.00
(102.1)
120
(534)
GTH, GS4H,
GS4EH or
PPTEH
The ties can be removed from the stud by turning counterclockwise.
Adjustable and releasable.
B
A REF.
C
D
Part Number
Length
Width Thickness
A
B
C
in. (mm) in. (mm) in. (mm)
Head
Height
D
in. (mm)
Recommended
Stud Size
in. (mm)
Max.
Bundle
Dia.
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
Recommended
PANDUIT ®
Installation
Tool Part No.
.59
(15)
10-24
(5)
1.18
(30)
35
(156)
Hand Installed
Only
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
1000
10000
STANDARD CROSS SECTION
PRST30S-S14-M30‡
46
5.2
(132)
.38
(9.7)
.050
(1.3)
Most commonly used parts appear in BOLD.
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 50.
All part numbers shown in standard package quantities unless denoted by ‡.
Specialty Ties
Applications:
• Underhood hose and harness routing
• Areas where bundles must be secured parallel to each other or
another element
Solution
Looking for a labor saving alternative to cushioned clamps when securing hoses
and wire bundles? PANDUIT ® Multiple Loop Cable Ties are the perfect solution.
PANDUIT ® Multiple
Loop Cable Ties —
Nylon 6.6
Features and Benefits:
• Offers multiple loop capability
• Prevents bundle damage with a wire strap body that spreads the
clamping forces
• Provides high tensile strength to route bundles securely
• Installs easily by hand — use PANDUIT ® tooling for repeatable tension
and cut-off
• Reduces part number inventory with a single product to cover multiple
bundle sizes
B
E
A
Except PLB4H-0
D2 REF.
D1 REF.
F
C
D
Max.
Combined
Bundle dia. Length
Width Thickness
D1 & D2
A
B
C
Part Number
in. (mm)
in. (mm) in. (mm) in. (mm)
Packaging*
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Head
Length
F
in. (mm)
Min. Loop Recommended
Tensile
PANDUIT ®
Installation
Strength
Tool Part No.
Lbs. (N)
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
100
1000
1000
10000
100
1000
1000
10000
100
1000
1000
5000
—
—
250
2500
—
—
250
2500
STANDARD CROSS SECTION
PLB2S-C
PLB3S-C
PLB4S-C
1.8
(46)
7.6
(193)
3.0
(76)
11.8
(300)
4.1
(104)
14.8
(376)
.320
(8.1)
.19
(4.8)
.052
(1.3)
.220
(5.6)
.465
(11.8)
.337
(8.6)
GTS, GS2B.
GTH, GS4H,
PTS, PPTS,
STS2 or STH2
50
(222)
HEAVY CROSS SECTION
PLB4H-TL‡
PLB4H-TL0‡
3.6
(91)
14.7
(373)
.300
(7.6)
.075
(1.9)
.322
(8.2)
.490
(12.4)
1.1
(27.9)
GTH, GS4H,
GS4EH,
or PPTEH
120
(534)
PANDUIT ® Multiple Loop Cable Ties —
Weather Resistant Nylon 6.6
B
E
D3
D2
A
D1
C
D
F
Part Number
Max.
Combined
Head
Bundle Dia. Length
Width Thickness Height
D1, D2 & D3
A
B
C
D
in. (mm)
in. (mm) in. (mm) in. (mm) in. (mm)
Head
Head
Width
Length
E
F
in. (mm) in. (mm)
Packaging*
Min. Loop
Tensile
Strength
Lbs.
(N)
Recommended
PANDUIT ®
Installation
Tool Part No.
125
(556)
GS4EH or
PPTEH
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
—
100
1000
EXTRA-HEAVY CROSS SECTION
PL3B5EH-C0‡
5.0
(127)
20.0
(508)
.500
(12.7)
.075
(1.9)
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 50.
All part numbers shown in standard package quantities unless denoted by ‡.
.400
(10.2)
.800
(20.3)
1.8
(45.7)
Most commonly used parts appear in BOLD.
47
Specialty Ties
Double Hose Clamp
Weather Resistant
Nylon 6.6
The Double Hose Clamp can be used on gasoline, hydraulic or
pneumatic hoses. It holds each hose individually to prevent abrasion
and holds them together to prevent twisting.
B
E
FIXED LOOP
ADJUSTABLE LOOP
A REF.
C
D
Part Number
DHC1.12x1.75-D0
Length
Width
A
B
in. (mm) in. (mm)
11.0
(279)
.28
(7.1)
Loop Diameters
Thickness
C
in. (mm)
Head
Height
D
in. (mm)
Head
Width
E
in. (mm)
Fixed
Loop
in. (mm)
Adjustable
Loop
in. (mm)
Min. Loop
Tensile
Strength
Lbs. (N)
.050
(1.3)
.31
(7.9)
.44
(11.2)
1.12
(28.4)
1.0 to 1.75
(25 to 44)
100
(445)
Recommended
Std.
PANDUIT ®
Installation
Pkg.
Tool Part No.
Qty.
GTH, GS4H,
STH2 or ST2EH
Packaging*
Std.
Ctn.
Qty.
Bulk
Pkg.
Qty.
Bulk
Ctn.
Qty.
—
500
2500
—
Curved tip up
GS4H
1. Wrap clamp around hose.
48
2. Position second hose in clamp.
Most commonly used parts appear in BOLD.
3. Loop tail around second hose
and thread tail through both
spacer heads.
4. Tension and cut off with
PANDUIT ® tool.
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 50.
All part numbers shown in standard package quantities unless denoted by ‡.
Specialty Ties
Polyethylene
Cable Marker Strap
For identifying telephone and fiber optic cable. Replaces costly and
cumbersome lead marking tags. Lightweight and easy-to-install.
Can be used as wrap-around or “flag” marker. Can also be used in
underground identification applications. Custom hot stamping is
available (see page 52).
.75
(19.1)
1.50
(38.1)
3.88
(98.5)
15.25
(387.4)
.033
(.84)
Loop Excess
Thru Slot
Unique design allows
strap to be used as:
Part Number
Color
Marking
Area
in. (mm,)
Max.
Bundle
Dia.
in. (mm)
Recommended
PANDUIT ®
Installation
Tool Part No.
1.50 x 2.62
(38.1 x 66.5)
4.38
(111)
Hand Installed Only
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
50
500
50
500
STANDARD CROSS SECTION
CM4S-L2
Red
CM4S-L8
Gray
*Order the number of pieces required in multiples of package quantities.
For colors and other materials, see page 50.
All part numbers shown in standard package quantities unless denoted by ‡.
WRAP-AROUND
MARKER
(Min. Dia.: 1.27")
“FLAG” MARKER
(Min. Dia.: 25")
Most commonly used parts appear in BOLD.
49
Part Number Suffix Codes for All PANDUIT ® Specialty Cable Ties
Part Number System (Example of PLST4HS25-TL)
PLST
4
Size:
Approximate
Maximum Bundle
Diameter in Inches
Part Description:
CM4S = Cable Marker Strap
DHC = Double Hose Clamp
PLST = Lock. Stud Mounted
PLB = Locking Bow Tie
PRST = Releas. Stud Mounted
(Ladder Style)
H
S25
Cross Section:
S = Standard
H = Heavy
EH = Extra-Heavy
—
Stud Size:
-S25 = 1/4" (M6)
-SC = .20" (5mm)
TL
Package Size:
L = 50
C = 100
TL = 250
D = 500
Color:
See Material/
Color chart. Not
all ties available
in all colors.
Material/Color Chart
Material/Color
Natural Nylon 6.6 (See Note)
Weather Resistant Nylon 6.6
Nylon 6.6 — Red
PANDUIT ® Mil Spec
Suffix*
Suffix**
✔
9
0
N/A
2
2
PANDUIT ® Mil Spec
Suffix**
Suffix*
8
8
30
N/A
300
N/A
Material/Color
Nylon 6.6 — Gray
Heat Stabilized Black Nylon 6.6
Heat Stabilized Weather Resistant
Nylon 6.6
*NOTE: ✔ designates PANDUIT ® standard Natural Nylon 6.6 color/material. No suffix required in part number.
**NOTE: MIL SPEC Color (suffix) per AS33671 (Formerly MS3367) and SAE AS33681 (Formerly MS3368).
Part
Number
CM4S-L
PLB2S-C
PLB3S-C
PLB4S-C
50
Standard Packaging
Natural
Available Color/
Nylon 6.6
Material (Suffix)
2, 8
✔
✔
✔
0
0
Most commonly used parts appear in BOLD.
Part
Number
DHC1.12X1.75-D
PLB2S-M
PLB3S-M
PLB4S-M
PLB4H-TL
PL3B5EH-C
PLST4HS25-TL
PLST30SC-D
PLST50SC-D
PRST40SC-D
Bulk Packaging
Natural
Available Color/
Nylon 6.6
Material (Suffix)
✔
✔
✔
✔
0
0, 30
0, 30
0, 30
0, 30
0
300
30
30
30
Military Cross Reference
Aerospace and Military Standard cross reference to PANDUIT ® part numbers
The PANDUIT ® Cable Ties and Marker Ties listed in the table below meet all the testing requirements of
Aerospace Standard SAE-AS23190A (formerly MIL-S-23190E) and the dimensional requirements of
Aerospace Standards SAE-AS33671 (formerly MS3367) and SAE-AS33681 (formerly MS3368).
Cable Ties
PAN-TY
Cable Tie
Part Number
PLT2S
PLT4S
PLT4H
PLT.7M
PLT1M
PLT1.5I
PLT8LH
—
PLT3S
—
—
—
—
—
—
®
Current MIL Std.
Part Number*
MS3367-1-*
MS3367-2-*
MS3367-3-*
MS3367-4-*
MS3367-4-*
MS3367-5-*
MS3367-6-*
MS3367-6-*
MS3367-7-*
MS3367-23-*
MS3367-24-*
MS3367-25-*
MS3367-26-*
MS3367-27-*
MS3367-29-*
DOME-TOP ®
Barb Ty Cable Tie
Part Number
BT2S
BT4S
BT4LH
—
BT1M
BT1.5I
BT8LH
BT9LH
BT3S
—
—
—
—
—
—
STA-STRAP ®
Cable Tie
Part Number
SST2S
SST4S
SST4H
—
SST1M
SST1.5I
SST8H
—
SST3S
—
—
—
—
—
—
BELT -TY ™
In-Line Cable Tie
Part Number
—
—
—
—
—
—
—
—
—
ILT2S
ILT4S
ILT4LH
ILT1M
ILT1.5I
ILT3S
Marker Ties
Current MIL Std.
Part Number*
MS3368-1-*A
MS3368-2-*A
MS3368-3-*C
MS3368-4-*D
MS3368-5-*E
PAN-TY ®
Cable Tie
Part Number
PLM2S
PLM4S
PL2M2S
PL3M2S
PLM1M
DOME-TOP ®
Barb Ty Cable Tie
Part Number
BM2S
BM4S
B2M2S
B3M2S
BM1M
The PANDUIT ® Installation Tools listed in the table below
meet all the testing requirements of MIL-T-81306 and the
dimensional requirements of MS90387.
Installation Tools
Current MIL Std.
Part Number*
MS90387-1
MS90387-2
MS90387-3
Tool
Part Number
GTS, GS2B
GS4H
GS4MT
* Color Code (See Material/Color Chart located in the back of each product line section).
Most commonly used parts appear in BOLD.
51
Custom Hot Stamping
PANDUIT ® Custom Hot Stamping Program
A custom program to mark
nylon cable ties, marker ties
and marker plates to suit
your application
requirements . . .
• Economical
• Convenient
• 1/8" (3mm), 3/16" (4.8mm), 5/64" (2mm) and 7/64"
(2.8mm) characters are available
• Standard Type Style: News Gothic
• Character sizes can be mixed from line-to-line
• Alphanumeric and sequential numbering for
serialization are available
• Sequential numbering available in 3/32" (2.4mm), 9/64"
(3.6mm), and 1/8" (3mm) characters
• Seven colors of hot stamping to make your message
stand out — Black, Blue, Green, Red, Yellow, Orange
and White
• Special logos, type styles and sizes can be provided
(when camera ready artwork is supplied)
• Minimum order: 5,000 pieces per part number and
message
Cable Tie Cross Sections
INTERMEDIATE
(Locking)
STANDARD
(Locking and Releasable)
LIGHT-HEAVY AND HEAVY
(Locking and Releasable)
EXTRA-HEAVY
(Locking and Releasable)
Marker Tie Cross Sections
MINIATURE
(Locking)
STANDARD
(Locking)
NOTE: Most cable ties and marker ties are available in colors
(See information at the back of each tie section).
Contact Your Local PANDUIT ® Distributor for Details
52
Most commonly used parts appear in BOLD.
PAN -POUCH ™ Telephone Cable Identification Kit
PANDUIT ® PAN-POUCH ™
Telephone Cable
Identification Kit
The PAN -POUCH ™ system provides a fast, convenient method of
identifying binder groups on both sides of a splice in PIC cable.
It consists of striped PAN -TY ® Cable Ties in 25 color combinations
which match the universally accepted Even-Count Color Code.
In addition, solid color ties are available for identification of
“Super Groups” in cable containing more than 600 pairs. Cable
ties have maximum bundle diameter of .82" (21mm). Each 50 pc.
package fits into PAN -POUCH ™ over Pocket Pouch.
.100
(2.5)
.185
(4.7)
3.8
(95)
.175
(4.4)
.154
(3.9)
.036
(.9)
Nylon 6.6 Cable Ties
Packaging*
Part Number
Cable Tie
Color
PLT1M-L6-10
PLT1M-L3-10
PLT1M-L5-10
PLT1M-L1-10
PLT1M-L8-10
Blue
Orange
Green
Brown
Slate
PLT1M-L6-2
PLT1M-L3-2
PLT1M-L5-2
PLT1M-L1-2
PLT1M-L8-2
Blue
Orange
Green
Brown
Slate
PLT1M-L6-0
PLT1M-L3-0
PLT1M-L5-0
PLT1M-L1-0
PLT1M-L8-0
Blue
Orange
Green
Brown
Slate
Packaging*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Part Number
Cable Tie
Color
White
50
50
50
50
50
1000
1000
1000
1000
1000
PLT1M-L6-4
PLT1M-L3-4
PLT1M-L5-4
PLT1M-L1-4
PLT1M-L8-4
Blue
Orange
Green
Brown
Slate
Red
50
50
50
50
50
1000
1000
1000
1000
1000
PLT1M-L6-7
PLT1M-L3-7
PLT1M-L5-7
PLT1M-L1-7
PLT1M-L8-7
Black
50
50
50
50
50
1000
1000
1000
1000
1000
Color
Stripe
Cable ties in other solid colors (sold in 100 pc. packages) see pages 24-26.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Yellow
50
50
50
50
50
1000
1000
1000
1000
1000
Blue
Orange
Green
Brown
Slate•
Violet
50
50
50
50
50
1000
1000
1000
1000
1000
PLT1M-L2
PLT1M-L0
PLT1M-L4
Red
Black•
Yellow•
—
50
50
50
1000
1000
1000
PLT1M-L6
PLT1M-L3
PLT1M-L5
PLT1M-L1
PLT1M-L8
Blue•
Orange•
Green•
Brown•
Slate•
—
50
50
50
50
50
1000
1000
1000
1000
1000
•Not included in filled PA N-PO UCH
™
Color
Stripe
.
Pouches
PAN-POUCH ™ is 10 1/2" x 38"
(267mm x 965mm) made of
2 ply laminated black nylon/
vinyl and folds to 10 1/2" x 6"
(266m x 152mm) for easy
storage. The pouch can be
easily hung from cable by
using Hook & Loop fasteners.
Packaging*
Part Number
Description
PPC25x50F
PAN-POUCH ™ filled with 1250 cable ties.
50 each of all 24 striped ties plus
solid red.
PPC25x50
Empty PAN -POUCH ™
PP5x50F
Pocket Pouch filled with 250 cable ties.
50 each: blue, orange, green, brown and
slate all with white stripe.
Pouch
Material
Std.
Pkg.
Qty.
2 ply
Laminated
Black Nylon/
Vinyl
1
Vinyl
1
1
Pocket Pouch holds
five (50 pc.) packages.
*Order by the number of pieces required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡.
Most commonly used parts appear in BOLD.
53
Cable Tie Kits
Cable Tie Kits in
Plastic Boxes —
KP-506A/KP-506A-0
Cable Ties and
Accessories Kit
Part Number
Description
KP-506A
Contains natural nylon ties for indoor use:
(100) PLT1M-C Cable Ties
(100) PLT1.5I-C Cable Ties
(100) PLT2S-C Cable Ties
(50) ABM2S-A Mounts
(1) Plastic Kit Box
KP-506A-0
KP-509
KP-509 Designer’s Kit
KB-550
KB-551
Cable Tie Kits in
Steel Boxes —
K-504 Cable Ties and
Accessories Kit
K-504
SR2
K-205 Cable Ties and
Terminal Kit
54
Most commonly used parts appear in BOLD.
Std.
Pkg.
Qty.*
K-205
Contains weather resistant cable ties and mounts for outdoor use:
(100) PLT1M-C0 Black Weather Resistant Cable Ties
(100) PLT1.5I-C0 Black Weather Resistant Cable Ties
(100) PLT2S-C0 Black Weather Resistant Cable Ties
(50) ABM2S-AT-0 Black Weather Resistant Mounts
(1) Plastic Kit Box
A special collection of cable ties and wiring accessories for prototyping and new
product development.
Contains (over 600 pieces):
Including PAN-TY ® Cable Ties (in different styles, sizes, colors and materials);
25 different cable tie mounts; 30 different wiring accessories;
(1) Plastic Kit Box
Assortment Pack contains natural and weather resistant PAN-TY ® nylon cable ties:
(15) PLT1M Cable Ties
(10) PLT1M Black Weather Resistant Cable Ties
(15) PLT1.5I Cable Ties
(10) PLT1.5I Black Weather Resistant Cable Ties
(15) PLT2S Cable Ties
(10) PLT2S Black Weather Resistant Cable Ties
(15) PLT3S Cable Ties
(10) PLT3S Black Weather Resistant Cable Ties
Assortment Pack contains natural and weather resistant DOME-TOP ® Barb Ty nylon
cable ties:
(15) BT1M Cable Ties
(10) BT1M Black Weather Resistant Cable Ties
(15) BT1.5I Cable Ties
(10) BT1.5I Black Weather Resistant Cable Ties
(15) BT2S Cable Ties
(10) BT2S Black Weather Resistant Cable Ties
(15) BT3S Cable Ties
(10) BT3S Black Weather Resistant Cable Ties
Contains cable ties, adhesive backed mounts and cable tie installation tool:
(100) PLT1M-C Cable Ties
(100) PLT1.5I-C Cable Ties
(100) PLT2S-C Cable Ties
(100) PLC2S-S10-C Clamp Ties
(100) TM2S8-C Mounts
(100) ABM2S-A-C Mounts
(1) STS2 Tool
(1) Steel Kit Box
2-Drawer Slide Rack to hold K-504 Kit or K-1100 Series Terminal Kits.
See PANDUIT ® Terminal Catalog, SA101N21B-NL.
Contains 300 cable ties, 600 terminals and 2 installation tools:
(100) PLT1M-C Cable Ties
(100) PLT1.5I-C Cable Ties
(100) PLT2S-C Cable Ties
(1) GTS Cable Tie Installation Tool
(100) PV18-6LF-C Terminals
(100) PV14-8LF-C Terminals
(100) PV14-10LF-C Terminals
(50) PV10-10LF-L Terminals
(100) BSV18X-C Splices
(100) BSV14X-C Splices
(50) BSV10X-L Splices
(1) CT-100 Crimping Tool
(1) Steel Kit Box
1
1
1
1
1
1
1
1
*Order the number of kits required in multiples of package quantities.
All part numbers shown in standard package quantities unless denoted by ‡.
Cable Tie Installation Tools
Cable Tie Installation Tools
The PANDUIT ® Selection. . . PANDUIT ® offers the greatest selection of job-matched tools:
Tool Controlled Tension
and Cutoff Tools
Pneumatic Tool Controlled
Tension and Cutoff Tools
Operator Controlled Tension and
Cutoff Tools
PAT1M/PAT1.5M Automatic Cable Tie
Installation Systems
Choosing the right tool increases productivity. . .
Whatever the need; Original Equipment Manufacturer (high, medium, low volume), maintenance/repair or
construction; PANDUIT ® has the tool to help lower your total installed cost. The following chart can be
used as a guide for tool selection:
Tool
Cable Tie
Cross
Section
GTS
SM, M, I or S
GS2B
M, I, or S
GTH
S, HS, LH
or H
GS4H
GS4H/B
S, HS, LH or H
GS4H121W
S, HS, LH or H
GS4EH
M, I
or S
STH2
S, LH
or H
ST2EH
LH, H
or EH
PTS
PPTS
PPTEH
PAT1M/PAT1.5M
Systems (Automatic)
Per Minute
Per Year
Operation
Typical Application(s)
4-6
Under
50,000
Hand
Low to Medium Volume OEM tie usage, maintenance/
repair or construction
1-4
Under
10,000
Hand
Maintenance/repair or construction
5-8
Up To
250,000
Pneumatic
250,000
and above
Pneumatic/
Electric
LH, H
or EH
STS2
STHV
Cable Tie Usage
LH or H
SM, M, I or S
M, I, or S
LH, H
or EH
M
30-40
Medium to High Volume OEM tie usage where a variety
of tie sizes are needed.
High Volume OEM tie usage
Most commonly used parts appear in BOLD.
55
Hand-Operated Tools
Hand-Operated Tools —
The most preferred hand-operated cable tie tools in the industry.
These tools are versatile and can be used for production,
maintenance or construction applications. These tools will tension
and cut off excess tie material flush to the head by squeezing
trigger handle.
Tool-Controlled Tension
and Cut-Off
For PANDUIT ® Cable Ties up to 1/2" (12.7mm) wide
•
•
•
•
Lightweight and balanced
Requires no special maintenance
Easy to change tension adjustment and easy to operate
Proven features to help lower installed costs; a combination of
design, operating and construction features provide a long
service life
• Replacement blades available
Part Number
GTS
Description
Installs PANDUIT ® Subminiature, Miniature, Intermediate and Standard cross
section cable ties. Qualified Product Listed per Mil. Std. MS90387-1 and
Mil. Spec. MIL-T-81306A. Plastic molded housing. Ergonomic design.
1
Color Identification:
Trigger Handle: Black
Selector Knob: Black
Weight: 8.8 oz. (249g)
GS2B
Installs PANDUIT ® Miniature, Intermediate and Standard cross section
cable ties. Qualified Product Listed per Mil. Std. MS90387-1 and
Mil. Spec. MIL-T-81306A.
Color Identification:
Trigger Handle: Black
Selector Knob: Black
Weight: 11.5 oz. (327g)
GTH
1
Installs PANDUIT ® Standard, Heavy-Standard, Light-Heavy and Heavy cross
section cable ties. Plastic molded housing. Ergonomic design.
Color Identification:
Trigger Handle: Red
Selector Knob: Red
Weight: 11.2 oz. (318g)
GS4H
1
Installs PANDUIT ® Standard, Heavy-Standard, Light-Heavy and Heavy cross
section cable ties. Durable powder coat finish. Qualified Product Listed per
Mil. Std. MS90387-2 and Mil. Spec. MIL-T-81306A.
1
Color Identification:
Trigger Handle: Red
Selector Knob: Red
Weight: 16 oz. (454g)
GS4H/B
Installs PANDUIT ® Standard, Heavy-Standard, Light-Heavy and Heavy cross
section cable ties. Durable powder coat finish. High tension, factory set,
non-adjustable.
1
Color Identification:
Trigger Handle: Blue
Weight: 16 oz. (454g)
GS4H121W
Installs PANDUIT ® Standard, Heavy-Standard, Light-Heavy and Heavy cross
section cable ties. This tool provides greater tension, especially on 175 lb.
strength ties, which results in tighter bundles. Durable powder coat finish.
1
Color Identification:
Trigger Handle: Green
Selector Knob: Green
Weight: 16 oz. (454g)
GS4EH
Installs PANDUIT ® Light-Heavy, Heavy and Extra-Heavy cross section cable ties.
Durable powder coat finish.
Color Identification:
Trigger Handle: Blue
Selector Knob: Blue
Weight: 15 oz. (426g)
56
Std.
Pkg.
Qty.*
1
*Order the number of pieces required in multiples of package quantities.
Most commonly used parts appear in BOLD.
Hand-Operated Tools
Hand Operated
Tools—
Installer-Controlled
Tension and Cut-Off
PANDUIT ® offers an economical series of tools for maintenance or
construction applications — the user determines the required cable tie
tension and the tools provide a cut-off. Used with the full line of PANDUIT ®
Cable Ties.
Part Number
STS2
Description
Installs PANDUIT ® Miniature, Intermediate or Standard cross section cable ties.
See STH2 operation below.
Color Identification: Black
Weight: 2 1/2 oz. (71g)
STH2
Std.
Pkg.
Qty.*
1
Installs PANDUIT ® Standard, Heavy-Standard, Light-Heavy or Heavy cross section
cable ties.
Color Identification: Red
Weight: 2 1/2 oz. (71g)
INSTALLATION PROCEDURE FOR
STS2 AND STH2 TOOLS
1. Install cable tie around bundle.
Tension tie by squeezing tool handle.
2. Reduce tension slightly and twist tool
1/4 turn either direction for cut-off of
cable tie.
• Inexpensive, maintenancefree, all purpose tools
• Ergonomic handle design
and short handle span
• Top loading feature for right
or left-handed users
ST2EH
1
Installs PANDUIT ® Light-Heavy, Heavy or Extra-Heavy cross section cable ties.
Color Identification: Black Handles
Weight: 16 oz. (454g)
After installing tie around bundle
and tensioning, tool is twisted a 1/4 turn
“in either direction” to cut off excess tie.
1
• Durable all steel construction
• Comfortable rubber handles
STHV
Installs PANDUIT ® Light-Heavy and Heavy cross section cable ties.
Color Identification: All Yellow
Weight: 14 oz. (399g)
After installing tie around bundle, the
handles are squeezed to provide
tension. A separate lever cuts
excess tie.
1
• Durable all steel
construction
• “Travel stop” helps prevent
pinched fingers
*Order the number of pieces required in multiples of packaging quantities.
Most commonly used parts appear in BOLD.
57
Pneumatic Hand Tools
Pneumatic Hand Tools
PANDUIT ® pneumatic tools tension and cut off excess tie after it
is hand-installed around the bundle, minimizing operator fatigue.
Tools are rugged, yet lightweight.
Tool-Controlled Tension
and Cut-Off
For PANDUIT ® Cable Ties up to 1/2" (12.7mm) wide
• Easy to change tension adjustment
• Requires no special training to use
• Durable, lightweight, easy to operate and designed to reduce
operator fatigue
• Tensions and cuts off excess tie in a fraction of a second
• Operates on non-lubricated air, without special maintenance
Part Number
PTS
Description
Installs Subminiature, Miniature, Intermediate or Standard cross section
cable ties.
Color identification: (Knob) Black
Weight: 17.3 oz. (490g)
Replacement parts can be part of a scheduled maintenance program
Plastic molded housing
Ergonomic design
PPTS
1
Installs Miniature, Intermediate or Standard cross section cable ties.
Color identification: (Knob) Black
Weight: 18 oz. (510g)
Replacement parts can be part of a scheduled maintenance program
Powder coat finish
PPTEH
Std.
Pkg.
Qty.*
1
Installs Light-Heavy, Heavy and Extra-Heavy cross section cable ties.
Color Identification: (Knob) Blue
Weight: 52 oz. (1476g)
Replacement parts can be part of a scheduled maintenance program
Powder coat finish
1
Filter Regulator and Hose
PPH10
10' (3m) Hose Assembly (regulator to tool). Includes a 1/8" NPT male
connector (to regulator) and 1/8" female quick disconnect fitting (to tool).
1
PL289N1
Filter/Regulator .5 micron (max.) element, regulated range 3-100 PSIG,
1/8" ports.
1
Note: PTS, PPTS and PPTEH tools require the PPH10 hose and PL289N1 Filter/Regulator for proper operation.
58
*Order the number of pieces required in multiples of package quantities.
Most commonly used parts appear in BOLD.
Hand-Operated Tool Accessories
Adjustment Features
Each cross section of cable ties can be installed with a variety of tensions to meet the application.
The proper tension range is marked on each package of cable ties.
Fast and Easy Selection
GTS Tool — Tension Setting Dial
GS2B Tool — Tension Setting Knob
Tool Tension Lock Kits
Certain applications require a locking
device on the selector knob
(one cross-section size and tension only).
Repair Parts
Can be part of a scheduled
maintenance plan or use only when
cutoffs are not clean and crisp.
Part Number
Description
KGTSTL
Tension Locking Kit for GTS.
KGTHTL
Tension Locking Kit for GTH.
KPTSTL
Tension Locking Kit for PTS.
TTLK3
Tool Tension Lock Kit.
Each kit contains (1) #4-40 selection locking screw (with head), (1) selection locking
clip, and (1) #4-40 tension locking screw (headless). For use with GS-Family Tools.
Std.
Pkg.
Qty.*
10
Blade Replacement Kits
KGTSBLD
Blade Replacement Kit for GTS, PTS.
KGTHBLD
Blade Replacement Kit for GTH.
K2-BLD2
Blade Replacement Kit for GS2B and PPTS (all versions).
K4H-BLD
Blade Replacement Kit for GS4H series (3-screw blade guard only).
KPPTEHB
Blade Replacement Kit for PPTEH series.
1
Gripper Replacement Kits
Hand Tool Accessory
KPPTEHG
KPTSG
KST2EHG
Gripper Replacement Kit for PPTEH series.
Gripper Replacement Kit for PPTS.
Gripper Replacement Kit for ST2EH.
GHH
Specifically designed to hold GTS, and GS (series) or PPTS tools.
Used wherever the hand tools are used—construction sites to assembly lines for
a convenient and handy place for the tool.
1
1
GHH — Holster
*Order the number of pieces required in multiples of package quantities.
Most commonly used parts appear in BOLD.
59
Fully Automatic Cable Tie Installation Systems
PAT1M/PAT1.5M Reel-Fed Systems for Miniature Cross Section Cable Ties
(18 lb. (80N) minimum loop tensile)
• The system consists of the tool head, dispenser, feeder hose and
continuously molded, reel-fed cable ties (5000 ties per reel). Each system
will install a cable tie in less than one second
• Choice of two tool head sizes for bundle diameters up to .82" (21mm) or up
to 1.3" (33mm)
• The dispenser and hose are designed to operate with either tool head for
maximum versatility and economy
• The system design permits complete mobility in the use of the tool and
location of the dispenser
• The system operates on 65 psig (minimum) non-lubricated, filtered air and
100-240 VAC 150 or 60 Hz—Automatically adjusts within this range
• Optional bench mount shown on page 61
• Choice of 3 materials
Tool Heads
Part Number
Dispenser
Description
Std.
Pkg.
Qty.*
PAT1M
Tool Head for cable ties up to .82" (21mm) bundle diameter (PLT1M-XMR).
1
PAT1.5M
Tool Head for cable ties up to 1.3" (33mm) bundle diameter (PLT1.5M-XMR).
1
• Lightweight, no counter-balance required
• Slim, ergonomically designed handle for operator comfort and greater productivity. Reduces
potential for repetitive motion injuries
• Right or left hand operation
• Durable, one-piece cable tie tip collector (for cut-off tips)
• Includes tension adjustment
• Built-in safety interlock prevents false triggering if anything obstructs jaw path
PDM
Stationary dispenser for 100 VAC, 120 VAC and 230 VAC.
• LCD display monitors performance.
If an error occurs an alarm is sounded
• On-line HELP menu
• Multi-language capability via LCD
display (English, Spanish, German,
Italian or French)
• Cable tie reels are easily loaded into
the dispenser, reducing downtime
• Audible reload signal when reel is empty
• Minimum maintenance required
• Power cord included
1
Specifications
Pneumatic
Electrical
• Operates at
• 100-240
65 psig
VAC
minimum
• 50 or 60 Hz.
• 7 scfm flow
• Less than
minimum
1 amp
• Operates on
• Approx.
non-lubricated
20 watts
air
(AVG)
Feeder Hose
Choose one:
PHM1
3.2' (1m) Feeder Hose.
1
PHM2
6.5' (2m) Feeder Hose.
1
PHM3
9.8' (3m) Feeder Hose.
1
•
•
•
•
Transfers cable ties and signal from dispenser to tool head
Available in three lengths for either tool head
Reversible
Large electrical connectors for quick, easy and secure connections
Other Components
60
Most commonly used parts appear in BOLD.
PDH10-37
Air hose from filter/regulator to dispenser/. 9.8' (3m).
Includes standard air fittings.
1
PL283N1
Filter/regulator 25 micron (max.) element, 3/8 " ports.
1
Cable Ties for Automatic Installation Systems
PATMBM Bench Mount used with PAT1M/PAT1.5M Automatic Systems for
Miniature Cross Section Cable Ties (18 lb., 80N minimum loop tensile)
For Operations Where the Application is Brought to the Tool
• Used with either PAT1M or PAT1.5M tool head
• Supplied with a foot-actuated pedal to allow operator to work
with both hands
• A tool can be installed in the mount in seconds
• Supplied with a four-hole base plate
• The bench mount operates on 65 psi non-lubricated, filtered
air which pilots off of the dispenser
In addition to tool head, dispenser, feeder hose and cable ties on reels;
order the following:
Description
Pkg.
Qty.
Bench mount and foot pedal for PAT1M/PAT1.5M system, four-hole base plate.
1
Part Number
PATMBM
Cable Ties for PAT1M/PAT1.5M Systems
Continuously molded cable ties in sizes, color and
material options to meet the application.
Part Number
Color
Max. Bundle
Diameter
in. (mm)
Length
in.
(mm)
Width
in.
(mm)
Min. Loop
Tensile
Strength Lbs.
(N)
.100
(2.5)
18
(80)
Use with
PANDUIT ®
Installation
System
Nylon 6.6 (for indoor use) up to 185°F (85°C)
• Miniature cross section
cable ties
• Self-locking
• UL Recognized
• 5000 ties/reel
Reels of 5,000 — 2 Reels/Carton
Cable Ties on Reels
PLT1M-XMR
Natural
PLT1M-XMR1
PLT1M-XMR2
PLT1M-XMR3
PLT1M-XMR4
PLT1M-XMR5
PLT1M-XMR6
PLT1M-XMR7
PLT1M-XMR8
PLT1M-XMR10
Brown
Red
Orange
Yellow
Green
Blue
Purple
Gray
White
PLT1.5M-XMR
Natural
.82
(21)
4.0
(102)
1.31
(33)
5.6
(142)
PAT1M
PAT1.5M
Weather Resistant Nylon (for outdoor use) up to 185°F (85°C)
PLT1M-XMR0
PLT1.5M-XMR0
Black
.82
(21)
4.0
(102)
1.31
(33)
5.6
(142)
PAT1M
.100
(2.5)
18
(80)
PAT1.5M
Heat Stabilized Nylon (for indoor use) up to 238°F (115°C)
PLT1M-XMR30
PLT1.5M-XMR30
Black
.82
(21)
4.0
(102)
1.31
(33)
5.6
(142)
PAT1M
.100
(2.5)
18
(80)
PAT1.5M
Flammability Rating: UL 94V-2, ATB < sec. per ASTM-D635.
Most commonly used parts appear in BOLD.
61
Cable Tie Selection and Specification Guidelines
Selecting the Proper Cable Tie Material for Your Application
By using this information as a guide, the user will be better equipped to select the best suited cable tie
and material to perform its intended function over a long period of time.
For long life and dependable service, there are many factors to consider when selecting the proper cable
tie for each application. Since it is impossible for PANDUIT ® to provide data on all the various
combinations of conditions which may arise, it is suggested that this data be used as a guide. Sample
cable ties should be tested under actual end-use conditions to determine the correct cable tie for
the application.
HALAR**
-69
-120
-109
-100
-76
-702
N/A
Stainless Steel*
TEFZEL***
-60
Weather Resistant
Acetal
Flame Retardant
6.6 Nylon
-300
Weather Resistant
Polypropylene
Flame Retardant
Black 6.6 Nylon
-39
Natural
Polypropylene
Heat Stabilized
Natural 6.6 Nylon
-30
Weather Resistant
Nylon 12
Heat Stabilized Black
6.6 Nylon
-0
Heat Stabilized
Weather Resistant
6.6 Nylon
Weather Resistant
6.6 Nylon
Natural
6.6 Nylon
To select the optimum cable tie for a specific application, the following table can be used as a quick
reference. First, determine the most critical design criteria and then read across the table to find which
material is most suitable to meet this need (10 = Most Suitable and 1 = Least Suitable). Next, review the
other criteria by scanning in a vertical direction on the chart and then make your final selection.
Design Criteria
Part Number Suffix
Material Designation
Loop Tensile Strength
7
7
7
7
7
7
7
6
5
5
7
5
9
10
Low Temperature Service
6
6
6
6
6
5
5
6
6
6
7
7
6
10
High Temperature Service
5
5
6
6
6
5
5]
5
5
5
8
7
3
10
Flammability
6
6
6
6
6
8
8
3
2
2
9
9
2
10
Ultraviolet Resistance
1
6
4
1
6
1
1
7
1
6
9
9
9
10
Radiation Resistance
3
3
3
3
3
3
3
4
5
5
9
9
3
10
Overall Chemical Resistance
–Hydrocarbons
–Chlorinated Hydrocarbons
–Acids
–Bases
–Salts
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
6
9
7
2
7
3
8
9
8
6
7
8
8
6
5
9
9
10
8
6
5
9
9
10
10
10
10
10
10
10
10
10
10
10
10
10
5
9
8
2
2
4
9
10
10
10
8
9
Low
Low
Low
Low
Med.
Med.
Med.
Med.
Low
Low
High
High
Med.
High
Relative Price
Example No. 1:
Application
If the application requires high radiation (2 x 108 rads) resistance, excellent
resistance to hydrocarbons and the price is not critical.
Selection
The best choice is TEFZEL*** or stainless steel. The price is higher than other
materials, but both have high ratings in resistance to radiation and hydrocarbons.
Example No. 2:
Application
Selection
If the application requires a low cost material, good ultraviolet resistance and good
resistance to acid rains.
The best choice is weather resistant polypropylene. Cost is low; it has a rating of 6
in ultraviolet resistance and a rating of 9 in resistance to acids.
62
Most commonly used parts appear in BOLD.
*See page 70 (Table C) for chemical resistance of 304 & 316 stainless steel.
** HALAR is a registered trademark of Solvay Solexis, Inc.
*** TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Material Selection Guide
To select the proper cable tie for your application, start at the
left of the chart and answer the “Yes” and “No” questions until
you arrive at the correct material to use.
Suggested Material to use
No — Nylon 6.6
No
No
Material must
resist high
heat?
Yes
Material must
be resistant to
chemicals
(salt/acids)?
Yes — Flame Retardant Nylon 6.6 (-69)
No — Heat Stabilized Nylon 6.6 (-30)
Material must
be flame
retardant?
Yes —Stainless Steel
No — Natural Polypropylene (-109)
No
Yes
Material must
be flame
retardant?
Material must
be flame
retardant?
Material must
resist high
heat?
No
Yes
Yes — Stainless Steel
No — Stainless Steel
Material must
be flame
retardant?
Yes — Stainless Steel
START
Does material
need to be
UV resistant?
No
Yes
No
Material must
resist high
heat?
Yes
Material must
be resistant
to chemicals
(salt/acids)?
No — Weather Resistant
Nylon 6.6 (-0) (-00)
Weather Resistant Acetal
Yes — Stainless Steel
Material must
be flame
retardant?
No — Weather Resistant Heat
Stabilized Nylon 6.6 (-300)
Yes — Stainless Steel
No
Yes
Material must
be flame
retardant?
Material must
resist high
heat?
Yes
**HALAR is a registered trademark of Solvay Solexis, Inc.
*** TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Material must
be flame
retardant?
No — Weather Resistant
Polypropylene (-100)
or Nylon 12 (-120)
Yes — Stainless Steel
Material must
be flame
retardant?
No — Stainless Steel
Yes — Stainless Steel
or TEFZEL** (-76)
or HALAR* (-702)
Most commonly used parts appear in BOLD.
63
Weathering
Weathering
Ultraviolet light (which is a component of sunlight) attacks, over a period of
time, most plastic materials and reduces their properties by breaking the
molecular chain. The material breakdown is accompanied by reductions in
tensile strength and elongation, increased brittleness, color changes and
loss of surface gloss.
Carbon black, which is used in PANDUIT ® nylon and polypropylene cable
ties, is one of the most effective stabilizers known today. A uniform
dispersion of carbon black provides good ultraviolet light resistance without
adversely affecting physical properties. The addition of carbon black, or any
other ultraviolet light stabilizer, prolongs the useful life of plastic products
used outdoors, but it does not totally eliminate the destructive effects of the
light. Some plastics, such as TEFZEL** or HALAR*, are intrinsically very
resistant to ultraviolet light and do not require stabilizing additives.
Weathering Test Methods
In order to monitor the effects of ultraviolet light and the effectiveness of ultraviolet stabilizers, PANDUIT ®,
in conformance with industry standards, adopted two methods of weatherability testing: Outdoor Aging and
Accelerated Weather Aging.
Outdoor Aging
The Outdoor Aging method is probably the best and most realistic method of the two. It is conducted in
accordance with ASTM D1435 Standard Practice for Outdoor Weathering of Plastics, and allows the
material to be affected by not only ultraviolet light, but by all other outdoor elements as well. Although this
may more closely approximate an actual application, two drawbacks do exist. The period of time required
to produce property decay and material failure may be quite long, and varying adverse chemical
environments cannot be tested.
Accelerated Weather Aging
Accelerated weathering tests are conducted to estimate the rate of degradation due to a combination
of ultraviolet light, temperature and moisture. The methods used are in accordance with the
following standards:
• ASTM D1499, Operating Light and Water Exposure Apparatus (Carbon-Arc type) for exposure
to plastics
• ASTM G53, Operating Light and Water Exposure (Fluorescent U.V. Condensation type) for exposure of
non-metallic materials
The condition specified in ASTM D1499 utilizes a carbon arc to simulate natural sunshine and a water
spray. The test chamber is operated 20 hrs/day with a two hour cycle of 108 minutes of simulated sunshine
and 12 minutes of sunshine and water spray. The temperature of a black body inside the chamber is
approximately 63°C (145°F) during the “Sunshine Only” portion of the cycle. Humidity is not controlled
inside the chamber.
The test chamber per ASTM G53 uses fluorescent sun lamps to generate ultraviolet light only. A heated
water pan produces condensation during a portion of the cycle.The daily cycle is composed of 20 hours of
light followed by 4 hours of condensation. Black body temperatures during the light cycle are 50°C (122°F)
and 40°C (104°F) during the condensation cycle.
PANDUIT ® has also designed a special chamber which is used to simulate the effect of acid rain and
ultraviolet light on cable tie materials. The effect of other common chemicals, such as road salt, are also
evaluated in this chamber.
These methods are effective in quickly determining the ultraviolet light resistance of the various cable tie
materials, but it must be emphasized that there are no exact correlations between accelerated aging and
actual outdoor exposure.
64
Most commonly used parts appear in BOLD.
*HALAR is a registered trademark of Solvay Solexis, Inc.
**TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Weathering
Material Failure Testing
Property decay can lead to three different modes of failure: loss of strength, loss of toughness or change
in appearance. The critical mode for any given application would depend upon the application and the
requirements it places upon the material itself.
Loss of strength is monitored by tensile testing samples of the material before and after it has been
weathered. This test will reveal the decreasing strength accompanied by extended weathering.
Loss of toughness can be monitored by measuring changes in elongation and impact strength. As
ultraviolet light exposure time increases and the material becomes brittle, its elongation and impact
strength are greatly reduced. It is important to note that brittle failures can occur even when the tensile
strength shows no change.
Although change in appearance is normally not a failure mode for cable ties, the plastic does tend to
discolor and lose its surface gloss as exposure increases. These changes can be measured by color
difference using Adams units which are similar to National Bureau of Standard units.
PANDUIT ® has its own weathering test program to determine estimated life of various cable tie
materials.This includes examining many previously aged samples obtained throughout the world.
In all cases, the amount of property decay increased with increasing exposure to ultraviolet light. The
principal signs of degradation were found to be brittleness, cracking and loss of surface gloss. It was also
determined that the time for failure to occur was shorter than indicated from industry tests performed on
material samples. This discrepancy is in part due to the fact that cable ties were tested in an end use,
stressed condition, while most plastic resin suppliers conduct weathering tests using unstressed
test bars.
Four cable tie materials (TEFZEL**, HALAR*, Weather Resistant ACETAL and Stainless Steel) have
superior ultraviolet light resistance. In tests conducted to date, all have shown no significant signs
of degradation.
Determining the outdoor life expectancy of any material is difficult since there are other factors, besides
ultraviolet light stability, which have to be considered. These factors are listed below and should be
considered before specifying a cable tie material.
TABLE A — External Factors Which Affect the Life of a Cable Tie
FACTORS
Chemicals
DECREASED LIFE
Applications which have chemicals present can reduce the life. This is
the most detrimental factor to the life of a tie.
Bundle
Diameter
As the bundle diameter is reduced, the tie has more bending stress.
A thick strap on small diameter has more stress.
Loading
If the tie is under high loading, this will add additional stress on the
tie body.
Thickness
Vibration
Degree of
Exposure
Moisture
Galvanized
Metals
WEATHERING LIFE EXPECTANCY
Materials (P/N Suffix)
Natural Polypropylene (-109)
Years*
1
Natural Nylon 6.6
1-2
Flame Retardant Black Nylon 6.6 (-60)
1-2
Flame Retardant Nylon 6.6 (-69)
1-2
A thinner tie will have a decreased life since surface cracks will
penetrate the thickness of the tie faster.
Heat Stabilized Nylon 6.6 (-30)
4-5
Heat Stabilized Natural Nylon 6.6 (-39)
1-2
Applications with high vibrations will cause impact which will
propagate any surface cracks.
Weather Resistant Nylon 6.6 (-0 & -00)
7-9
No shield or shade, southern exposure, higher altitudes and high
temperatures decrease the life of the cable tie.
Heat Stabilized Weather Resistant Nylon 6.6 (-300)
7-9
Weather Resistant Polypropylene (-100)
7-9
Dry environments cause nylon 6.6 ties to become more brittle. High
humidity plus high temperatures can result in degradation due to
hydrolysis in nylon.
Weather Resistant Nylon 12 (-120)
12-15
TEFZEL** (-76)
>15
HALAR* (-702)
>15
Acid rain and acid moisture acting on galvanized metals release
chemicals known to attack nylon 6.6.
Acetal
>20
Stainless Steel (MLT prefix)
>30
*Based on assumption of minimum loading, no chemical attack and
impact-free conditions.
*HALAR is a registered trademark of Solvay Solexis, Inc.
**TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Most commonly used parts appear in BOLD.
65
Flammability
Flammability
A number of test procedures have been developed which can be used for the evaluation
and comparison of various materials to support combustion.
UL94 Vertical Burning Test
Samples of a material, with dimensions 127mm by 12.7mm and the thickness of the
intended end use product, are tested in an unaged “as manufactured” state and in an
aged state (7 days at 158 °F, 70°C). The test requires the placement of a precisely
controlled flame under a vertically supported specimen for a 10 second period. The
flame is removed and the duration of flaming is recorded. If the flame extinguishes, the
specimen is immediately subjected to a second 10 second ignition period. Duration of
flaming is again recorded. A piece of surgical cotton is placed under the specimen. If
drips ignite the cotton, this fact is also recorded.
Materials Classed 94V-0
Materials classed 94V-0 shall:
• Not have any specimens which burn with flaming combustion for more than 10 seconds after either
application of the test flame
• Not have a total flaming combustion time exceeding 50 seconds for the 10 flame applications for each
set of five specimens
• Not have any specimens which burn with flaming or glowing combustion up to the holding clamp
• Not have any specimens which drip flaming particles that ignite the dry absorbent surgical cotton
located 12" (305mm) below the test specimen
• Not have any specimens with glowing combustion which persists for more than 30 seconds after the
second removal of the test flame
Materials Classed 94V-1
Materials classed 94V-1 shall:
• Not have any specimens which burn with flaming combustion for more than 30 seconds after either
application of the test flame
• Not have a total flaming combustion time exceeding 250 seconds for the 10 flame applications for each
set of five specimens
• Not have any specimens which burn with flaming or glowing combustion up to the holding clamp
• Not have any specimens which drip flaming particles that ignite the dry absorbent surgical cotton
located 12" (305mm) below the test specimen
• Not have any specimens with glowing combustion which persists for more than 60 seconds after the
second removal of the test flame
Materials Classed 94V-2
• Not have any specimens which burn with flaming combustion for more than 30 seconds after either
application of the test flame
• Not have a total flaming combustion time exceeding 250 seconds for the 10 flame applications for each
set of five specimens
• Not have any specimens which burn with flaming or glowing combustion up to the holding clamp
• Be permitted to have specimens that drip flaming particles which burn only briefly, some of which ignite
the dry absorbent surgical cotton placed 12" (305mm) below the test specimen
• Not have any specimens with glowing combustion which persists for more than 60 seconds after the
second removal of the test flame
66
Most commonly used parts appear in BOLD.
Flammability
ASTM D 635
Samples of a material, with dimensions 125mm by 12.5mm and the thickness of the intended end use
product, are tested in an unaged “as manufactured” state. A precisely controlled flame is applied to the
specimen and a stopwatch is started. The flame is applied for 30 seconds. The stopwatch is stopped
when burning or glowing combustion ceases or when the flame has proceeded to a mark 100mm from
the free end. Ten specimens are tested.
• Burning Rate
• If two or more specimens have burned to the 100mm mark then Average Burning Rate (cm/min.) shall be reported
as the average of the burning rates of all specimens which have burned to the 100mm mark
• Average Time of Burning and Average Extent of Burning
• Average time of burning and average extent of burning of the sample shall be reported if none of ten samples or
no more than one of twenty specimens have burned to the 100mm mark
• Average Time of Burning (ATB):
• Average Extent of Burning (AEB):
10
ATB,s =
∑0
10
( t – 30s )
Number of Specimens
Rounded to the nearest 5 sec.
AEB,mm =
(100 – unburned length)
∑ 0kjf dsjfs
Number of Specimens
Rounded to the nearest 5mm
Flammability Ratings
Materials
UL94
ASTM D635
Natural Nylon 6.6
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Weather Resistant Nylon 6.6 (-00)
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Weather Resistant Nylon 6.6 (-0)
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Heat Stabilized Nylon 6.6 (-30)
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Heat Stabilized Natural Nylon 6.6 (-39)
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Heat Stabilized Weather Resistant Nylon 6.6 (-300)
94V-2 (1/16")
AEB = 20mm
ATB = 5 seconds
Flame Retardant Black Nylon 6.6 (-60)
94V-0 (1/64")
AEB =15mm
ATB < 5 seconds
Flame Retardant Nylon 6.6 (-69)
94V-0 (1/64")
AEB = 15mm
ATB < 5 seconds
Weather Resistant Nylon 12 (-120)
Not Recognized
Ave. Burning Rate
1.6cm/min.
Natural Polypropylene (-109)
Not Recognized
Ave. Burning Rate
2 cm/min.
Weather Resistant Polypropylene (-100)
94 HB (.94mm)
Ave. Burning Rate
2 cm/min.
TEFZEL** (-76)
94V-0(1/16")
AEB < 15mm
ATB < 5 seconds
HALAR* (-702)
94V-0(1/16")
AEB = 15 min.
ATB < 5 seconds*
Weather Resistant ACETAL (DT Series)
94 HB (1.5mm)
Ave. Burning Rate
2.8 cm/min.
Stainless (MLT prefix)
Not Applicable
Not Applicable
Rating based on 1/8" thick test samples
*HALAR is a registered trademark of Solvay Solexis, Inc.
**TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Most commonly used parts appear in BOLD.
67
Radiation/Moisture/Temperature/Tensile Strength
Radiation
Installed cable ties of various materials have been exposed to different amounts of
radiation to determine the maximum acceptable limit. These tests were conducted by
PANDUIT ® mainly to determine the acceptability for use in various areas of nuclear power
plants (accumulated over 40 year life). See Table B (page 69) for radiation resistance rating.
Moisture
Many plastics when exposed to high relative humidity absorb water and, as such, the tensile
strength of the material can change dramatically. Nylon 6.6 when exposed to 100% relative
humidity, will absorb as much as 8.5% water which will reduce tensile strength by 50% when
compared to a dry cable tie. Polypropylene, HALAR*, Type 12 Nylon, TEFZEL** and ACETAL
are low water absorbing materials and, as such, the effect of water is minimal.
See Table B (page 69) for moisture absorption.
Temperature
Plastic materials normally undergo property loss during exposure to high temperature due to
oxidation. The Maximum Continuous Use Temperature for cable tie materials depends upon the time
at the elevated temperature as well as other environmental conditions. Initially, plastics become
more flexible and weaker when exposed to high temperatures. After a period of time, oxidation may
occur which will cause embrittlement, making plastic cable ties more susceptible to failure from
impact and vibration.
The Maximum Continuous Use Temperature, otherwise known as the Relative Thermal Index
(mechanical without impact) is determined per UL746B. It is one indicator of a materials ability
to retain a particular physical property when exposed to elevated temperatures over an extended
period of time. It is based on the assumption that there is no loading, no chemical attack and impact free condition.
The Maximum Continuous Use Temperatures for cable tie materials are listed in Table B (see page 69).
Low temperature exposure will also make most plastics more brittle during the exposure, but little property loss
occurs when the material is returned to room temperatures. The Minimum Continuous Use Temperatures for cable tie
materials are listed in Table B (see page 69).
Tensile Strength
Most cable ties are selected based on material, length and minimum loop tensile strength. Minimum loop tensile
strength was established under SAE Aerospace Standard AS23190. Each cross section cable tie (Miniature-M,
Intermediate-I, Standard-S, Heavy-H and Extra Heavy-EH) has a different loop tensile strength when tested
per AS23190.
The cable tie is first conditioned at 49°C (120°F), 20% relative humidity for 24 hours, then
the cable tie is installed on a split mandrel and the halves of the mandrel separated at a rate
of 1" (25.4mm) per minute (Fig.1). The separating force required to unlock or break the
cable tie is the loop tensile strength. Loop tensile strength is dependent both on the locking
design and the tensile strength (psi) of the material. As an example, the tensile strength of
polypropylene material is approximately 1/2 to 1/3 of nylon 6.6; thus the loop tensile
strength of a given cross section tie made of polypropylene would be much less than a tie
made of nylon 6.6. This is another property to be considered when selecting a cable tie.
The various representative loop tensile strengths are listed in Table B (page 69).
68
Most commonly used parts appear in BOLD.
Fig. 1
*HALAR is a registered trademark of Solvay Solexis, Inc.
**TEFZEL is a registered trademark of E. I. DuPont de Nemours Co.
Physical Characteristics of Cable Tie Materials
-109
-100
-76
-702
Stainless Steel
-120
Weather Resistant
Acetal
-69
HALAR*
-60
TEFZEL**
-300
Weather Resistant
Polypropylene
Flame Retardant
6.6 Nylon
-39
Natural
Polypropylene
Flame Retardant Black
6.6 Nylon
-30
Weather Resistant
Nylon 12
Heat Stabilized
Weather Resistant
6.6 Nylon
-0 and
-00
Heat Stabilized Natural
6.6 Nylon
None
Heat Stabilized Black
6.6 Nylon
Natural
6.6 Nylon
Design Criteria
Part Number Suffix/
Material Designation
Weather Resistant
6.6 Nylon
TABLE B
N/A
N/A
Tensile Strength
73°F (psi)
12,000 12,000 12,000 12,000 12,000 12,000 12,000
8,100
4,100
4,100
7,500
7,000
6,500
(Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 2)
Color
Natural
Black
Black
Natural
Black
Black
28
28
26
26
26
34
34
NA
NA
NA
30
60
NA
NA
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
1 x 105
Rads
3.5 x 106
Rads
1 x 106
Rads
1 x 106
Rads
2 x 10 8
Rads
2 x 108
Rads
6 x 105
Rads
2 x 108
Rads
Water Absorption
(24 hours)
1.2%
1.2%
1.2%
1.2%
1.2%
1.1%
1.1%
0.3%
0.1%
0.1%
工商网监
湘ICP备2023018690号
