MS2X375X15-LS

Stainless Steel Strapping Stainless Steel Strapping REPLACES TRADITIONAL WING SEAL STRAPS • Suited to applications requiring higher loop tensile strength and/or wider bearing surfaces than PAN-STEEL™ ties • Fast and easy to install using PANDUIT installation tool • Safe to handle—no sharp edges STRAPPING PANDUIT ® Part No. Standard Sizes *Nylon coated straps available. Contact factory. • Suited to applications requiring higher loop tensile strength and/or wider bearing surfaces than PAN-STEEL ties • Fast and easy to install using PANDUIT installation tool. • Safe to handle—no sharp edges • Buckle design provides low finished profile —after tensioning, cut end is locked inside buckle • Standard material is 304 stainless, non-magnetic Max. Bundle Dia. In. (mm) Approx. Width In. (mm) Min. Loop Tensile Strength lbs. (n) Std. Pkg. Qty. Std. Ctn. Qty. 304 STAINLESS STEEL - .015" THICK MS2X375X15-LS MS4X375X15-LS MS6X375X15-LS MS8X375X15-LS MS10X375X15-LS 2.00 (50) 4.00 (102) 6.00 (152) 8.00 (203) 10.00 (254) 10.5 16.2 22.5 28.7 35.0 (266) (412) (572) (729) (889) .375 (10) 300 (1335) 50 50 50 50 50 250 250 250 250 250 MS4X500X15-LS MS6X500X15-LS MS8X500X15-LS MS10X500X15-LS 4.00 (102) 6.00 (152) 8.00 (203) 10.00 (254) 16.2 22.5 28.7 35.0 (412) (572) (729) (889) .500 (12) 500 (2224) 50 50 50 50 250 250 250 250 MS4X625X15-LS MS6X625X15-LS MS8X625X15-LS MS10X625X15-LS 4.00 (102) 6.00 (152) 8.00 (203) 10.00 (254) 16.2 22.5 28.7 35.0 (412) (572) (729) (889) .625 (16) 600 (2670) 50 50 50 50 250 250 250 250 50 50 50 50 250 250 250 250 304 STAINLESS STEEL - .020" THICK MS4X500X20-LS MS6X500X20-LS MS8X500X20-LS MS10X500X20-LS 4.00 (102) 6.00 (152) 8.00 (203) 10.00 (254) Custom Length Strapping System • Provides job-site versatility with minimum inventory • Gives custom capability on larger diameters • 304 stainless steel • Buckle is easy to install—just slip onto strapping and turn strapping back on bundle Approx. Length In. (mm) 16.2 22.5 28.7 35.0 (412) (572) (729) (889) .500 (12) 500 (2224) Thickness In. (mm) Approx. Width In. (mm) Used With Buckle Std. Pkg. Qty. Std. Ctn. Qty. MS375X15-TSR .015 (0.4) .375 (10) MSB375 200'* — MS500X15-TSR .015 (0.4) .500 (12) MSB500 200'* — MS500X20-TSR .020 (0.5) .500 (12) MSB500 200'* — MS625X15-TSR .015 (0.4) .625 (16) MSB625 200'* — PANDUIT ® Part No. STRAPPING BUCKLE MSB375-CS Used with .375" width strapping 100 1000 MSB500-CS Used with .500" width strapping 100 1000 MSB625-CS Used with .625" width strapping 100 1000 *Standard Package - TSR = 200 ft. reel. Order the number of reels required. Order the number of bundles required, in multiples of std. pkg. qty. INSTALLATION TOOL • Replacement nose and gripper provide an economical means to keep tool operating efficiently in the future PANDUIT ® Part No. Pkg. Qty. BT2MS75 Tensions, cuts strapping and secures the buckle tab. Used with all widths and thicknesses of PANDUIT strapping BT2N75 Replacement nose section for BT2MS75 tool 1 KT2MG Replacement tension gripper for BT2MS75 tool 1 BT2MS75 76 Description For more complete information on Stainless Steel Products, see SA101N16G. 1