System Catalog
PANis
-S TEEL
This
Header-18pt.
™
SYSTEM
SA# 101N16J-NL
Prim e m oving products from PANDUIT are part numbers printed in bold typeface .
They are stocked items for r apid response and available from our local distributors.
Table of Contents – SA101N16J-NL
Page
PAN -STEEL Stainless Steel Ties – Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
PAN -STEEL Stainless Steel Ties – MLT Series and WAVE -TY Series . . . . . . . . . . . . . . . . . . . . . . . . . . .4
PAN -STEEL Custom Length Banding System – MBS & MBH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Coated Stainless Steel Ties – MLTC Series and Cushion Sleeving . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Double Wrapped Stainless Steel Ties – MLTDH Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Installation Tools for Type MLT, Type MLTC and Type MLTDH Stainless Steel Cable Ties . . . . . . . 8-9
Stainless Steel, Brass, and Aluminum Marker Plates and Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Custom Marking Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Metal Marking Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14
Metal Accessories & Design Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Stainless Steel Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17
Telcommunications Stackable Cable Spacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19
Stainless Steel Tie Technical Data – MLT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21
PAN -STEEL Stainless Steel Strapping System and Custom Length Strapping System . . . . . . . . 22-23
Nylon Coated Stainless Steel Strapping System and Strapping Installation Tool . . . . . . . . . . . . . .24
PAN -STEEL Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-27
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
™
™
Stainless Steel Systems And Explanations
METAL TIES
PA N -S T EEL (MLT Series): Metal Locking Ties, Ball Lock Version in .18" (4.4mm) and .31" (7.9mm) widths
CUSTOM LENGTH BANDING SYSTEM: Ball Lock Version in Reels of 250 ft. (76m) and 1000 ft. (305m); .18" (4.4mm)
and .31" (7.9mm) widths
METAL STRAPS
STAINLESS STEEL STRAPS (MS Series) : Fold-Over Buckle Design in .375" (9.5mm), .500" (12.7mm) and .625"
(15.9mm) widths
CUSTOM LENGTH STRAPPING SYSTEM: Fold-Over Buckle Design Provided in Reels of 200 ft. (61m); .375"
(9.5mm), .500" (12.7mm) and .625" (15.9mm) widths
Approvals
Military Specification
MIL-S-23190E
Bureau Veritas
LISTED
E56854
D et Norske Veritas
ABS Pro gram s
Cert. 99CH18282-X
Lloyd’s Register of Shipping
Un ited States
Coast Guard
Germanischer Lloyd
RINA
For Technical Assistance, call: 866-405-6659 (outside the U.S., see page 28 for International Directory)
1
PAN-STEEL ™ Stainless Steel Ties – Overview
PANDUIT PAN-STEEL Stainless Steel Locking Tie
Design Features (MLT Series)
The PAN -STEEL system provides a strong, durable method of bundling, identifying and fastening, which
can be used in virtually all indoor, outdoor and underground (including direct burial) applications, including
applications where severe environmental conditions exist. The ties are designed for use in critical
applications where vibration, radiation, weathering, corrosion and temperature extremes are a factor
(refer to page 21 for chemical resistance char t).
HIGH STRENGTH
• 100 lb. (445N) and 250 lb. (1112N) minimum loop tensile strengths per Military Standard MIL-S-23190
(refer to page 20 for details); 120 lb. (534N) for the coated cable ties per Military Standard MIL-S-23190
and 600 lb. (2668N) for the double wrapped ties per Military Standard MIL-S-23190
SAFE TO HANDLE
• Rounded sides and smooth surfaces—safe to handle (see below)
FAST INSTALLATION
• Low profile, self-locking tie is easy to
thread for fast installation
• No special tools required for installation
MATERIAL
Height o f locking head
Non-magnetic stainless steel
• 304—most common for typical outdoor applications
• 316—for superior corrosion resistance in salt water and spray applications
TEMPERATURE CAPABILITY
Type 304 – -112°F (-80°C) to 1000°F (538°C)
Type 316 – -112°F (-80°C) to 1000°F (538°C)
Type 321 – -112°F (-80°C) to 1700°F (925°C)
(Refer to page 20 for details.)
Stand ard Cross
Section T ies
H = .16" (4.1mm )
Heavy Cross
Section Co ated Ties
H = .235" (6.0mm )
Heavy Cross
Section T ies
H = .21" (5.3mm )
Heavy Cross
Section Do uble
Wrap ped Ties
H = .21" (5.7mm )
Contact the facto ry for registrar and
product sco pe informatio n
Advantages of the Rounded Sides of
PAN -STEEL Stainless Steel Ties
Cross sectional view of other
manufacturer’s tie body. (Photo
micrograph shown is magnified 150X.)
Cross sectional view of PANDUIT tie
body. (Photo micrograph shown is
magnified 150X.)
Side view of PANDUIT tie.
The PA N-S TEEL Stainless Steel cable tie is designed for superior comfor t and safety when handling due to its
fully rounded sides and smooth surfaces. Smooth surfaces and rounded sides assure cable protection and
operator safety. PANDUIT not only removes the burr, but actually passes the material through a secondary
process which removes the top and bottom corners of the material.
2
This
Header-18pt.
Overview
PAN-STEEL ™ Stainless Steel Ties
– is
PANDUIT PA N-STEEL Stainless Steel Locking Tie (MLT Series)
The unique self-locking design simplifies installation and
eliminates any protruding ends when used with PANDUIT
installation tooling (refer to pages 8, 9 and 10) on resilient bundles.
Other bundles can be made resilient by the use of PCS cushion
sleeving (refer to page 6). Two widths are available: .18" (4.4mm)
and .31" (7.9mm) both .010" (0.254mm) thick and provide 100 lb.
(445N) or 250 lb. (1112N) minimum loop tensile strength per
MIL-S-23190. Available in stock lengths for outside bundle
diameters up to 14" (356mm). Large lengths can be custom made
or use the custom length banding system to provide unlimited
lengths (see page 5 for details).
Exclusive Locking Method
Typical Cable Bundle
Locking Head Cross Section
Unique stainless steel ball locking design allows smooth entry of the tie body for ease of threading. The ball
is permanently entrapped in the head portion of the tie. When the tail of the tie is passed through the locking
head, the tail is forced upward by the ramp (see drawing) which creates constant contact between the tie
and the locking ball. This contact assures locking in any position (upside down, sideways, etc.). When
locked on a bundle, the ball, working in conjunction with the angled ramp of the head, provides a positive
mechanical wedge locking action. The forces created by this wedging action are so great that mechanical
deformation of the tie body occurs at the point of contact between the ball and tie, locking the tie.
Self-Locking Head for Fast Installation
1. Place tie around bundle, put tip
2. Use one of the PANDUIT
PAN -STEEL installation tools
through head and pull up tight
by hand.
to tension and cut off excess
tail quickly.
For additional tool information
refer to pages 8, 9 and 10 for details.
The stainless steel metal locking tie series
can be fastened by hand as shown in
Photo 1. No tools are required. Just place
around bundle, pull the tip of the tail through
the locking head and pull up tight by hand.
The self-locking head secures the tie in place.
Photo 2 shows the metal locking tie series
being installed with the PANDUIT GS4MT tool
which automatically tensions and cuts off
excess tie. The system provides adjustable
tension control and automatic cut-off for quick,
consistent and secure installation with the
lowest installed cost.
Part Number System Example – MLT Series
(Stock Size Tie)
MLT
Part Description
Metal
Locking
Tie
6
Bundle
Diameter
Reference
(inches)
S
CrossSection
S = Standard
H = Heavy
—
CP
Package Qty.
Q
= 25
L* = 50
LP** = 50
CP = 100
Material
(blank) = 304
316
= 316
*Stan dard C ross-Sectio n
** Heavy Cro ss-Section
3
PAN-STEEL ™ Stainless Steel Ties – MLT Series
PAN-STEEL Stainless Steel Ties
Part
Number
Material Min. L oop
&
Tensile
Cross Streng th
Section Lb s. (N *)
Max.
Bund le
Dia.
in. (mm)
Len gth **
in. (mm)
T hickness
&
Wid th
in. (mm )
Reco mmend ed
PANDU IT
Installation
Tool ***
Part Num ber
Pkg. Ctn .
Qty. Qty.
Type AISI 304
MLT-S Standard Cross-Section:
.18" (4.4mm) wide.
MLT-H Heavy Cross-Section:
.31" (7.9mm) wide.
The PAN -STEEL system provides a
strong durable method of bundling,
identifying and fastening. Can be
used in vir tually all indoor, outdoor
and underground (including direct
burial) applications, especially
where severe environmental
conditions exist.
MLT1S-CP
MLT2S-CP
MLT2S-L
MLT2.7S-CP
MLT4S-CP
MLT4S-L
MLT6S-CP
MLT8S-CP
MLT10S-CP
MLT12S-Q
MLT14S-Q
MLT15S-Q
304
Std.
MLT2H-LP
MLT2.7H-LP
MLT4H-LP
MLT6H-LP
MLT8H-LP
MLT10H-LP
MLT12H-Q
MLT14H-Q
304
Hvy.
100
(445)
1.00(25)
5.0(127)
2.00(50)
7.9(201)
2.00(50)
7.9(201)
2.70(69) 10.2(259)
4.00(102) 14.3(362) .010(0.25)
4.00(102) 14.3(362)
X
6.00(152) 20.5(521) .18(4.4)
8.00(203) 26.8(679)
10.00(254) 33.0(838)
12.00(305) 42.0(1067)
14.00(356) 47.0(1194)
15.00(380) 49.2(1250)
250
(1112)
2.00(50)
7.9(201)
2.70(69) 10.2(259)
4.00(102) 14.3(362) .010(0.25)
6.00(152) 20.5(521)
X
8.00(203) 26.8(679)
10.00(254) 33.0(838) .31(7.9)
12.00(305) 42.0(1087)
14.00(356) 47.0(1194)
100
(445)
1.00(25)
2.00(50)
4.00(102)
6.00(152)
8.00(203)
10.00(254)
500
500
500
500
500
500
500
500
500
125
125
125
50
50
50
50
50
50
25
25
250
250
250
250
250
250
125
125
100
100
100
100
100
100
500
500
500
500
500
500
50
50
50
50
50
250
250
250
250
250
Type AISI 316
MLT1S-CP316
MLT2S-CP316
MLT4S-CP316
MLT6S-CP316
MLT8S-CP316
MLT10S-CP316
316
Std.
5.0(127)
7.9(201)
14.3(362) .010(0.25)
X
20.5(521) .18(4.4)
26.8(679)
33.0(838)
MLT2H-LP316
2.00(50)
7.9(201)
Three types of materials available:
MLT4H-LP316
4.00(102) 14.3(362) .010(0.25)
316
250
AISI 304 non-magnetic stainless
MLT6H-LP316
6.00(152) 20.5(521)
X
Hvy.
(1112)
MLT8H-LP316
8.00(203) 26.8(679) .31(7.9)
steel—for most applications;
MLT10H-LP316
10.00(254) 33.0(838)
AISI 316 non-magnetic stainless
*Per Military Specification MIL-S-23190. For additional details, see page 20.
steel–for applications requiring
**Other lengths available, contact factory.
***Refer to pages 8, 9 and 10 for information on installation tools.
superior corrosion resistance.
Order number of ties required in multiples of Pkg. Qty.
AISI 321 non-magnetic stainless
steel material for high temperature
applications. Contact factor y for details.
™
Part
Number
Superior Grip
Stainless
Steel Ties
PPTMT
GS4MT
ST2MT
or
HTMT
100
100
50
100
100
50
100
100
100
25
25
25
Material Min. L oop
&
Tensile
Cross Streng th
Section Lb s. (N *)
Max.
Bund le
Dia.
in. (mm)
Length
in. (mm)
T hickness
&
Wid th
in. (mm )
PPTMT
GS4MT
ST2MT
or
HTMT
L ISTED
Reco mmend ed
PANDU IT
Installation
Tool ***
Part Num ber
Pkg. Ctn .
Qty. Qty.
WAVE -TY SERIES
MLT2.7WH-LP
MLT4WH-LP
MLT6WH-LP
304
Hvy.
MLT8WH-LP
MLT10WH-LP
200
(890)
2.70(70)
10.2(259)
4.00(102)
14.2(361)
6.00(152)
20.5(521)
8.00(203)
26.8(631)
10.00(254)
33.0(838)
50 250
.010(0.25)
X
.31(7.9)
*Per Military Specification MIL-S-23190. For additional details, see page 20.
***Refer to pages 8, 9 and 10 for information on installation tools.
Order number of ties required in multiples of Pkg. Qty.
PPTMT
GS4MT
ST2MT
or
HTMT
50 250
50 250
50 250
50 250
APPLICATION TOOL
(PA NDU IT GS4MT SHOWN)
The Patented WAVE FORM Spring in the WA VE -TY
• Tightly clamps on applications where other
stainless steel ties will not function
• Retains tension on a solid bundle with minimal
applied force
• Tension may be created with a manual tool or
PANDUIT installation tooling
• Available in Type 304 and 316 stainless steel
4
Prime moving products app ear in BOLD.
DU RING INSTA LLATION
WAVE SPRING IS BEING
STRETCHED B Y A PPLICATION TOOL
AFTER INSTA LLATION
WAVE SPR IN G
CONTRACTS, R ESULTIN G
IN SU PERIOR GRIP ON
RIGID SUR FACES.
This is Header-18pt.
PAN-STEEL ™ Custom Length Banding
System
Custom Length Banding System MBS and MBH Banding
Cross
Section
Min. Lo op
Ten sile
Strength
Lbs. (N *)
Max.
Bu ndle
Dia.
in. (mm )
Leng th
ft. (m)
MBS-TLR
Std.
100 (445)
Any
250 (76)
MBS-MR
Std.
100 (445)
Any
MBH-TLR
Hvy.
250 (1112)
Any
MBH-MR
Hvy.
250 (1112)
Any
MBS-TLR316
Std.
100 (445)
Any
MBS-MR316
Std.
100 (445)
Any
MBH-TLR316
Hvy.
250 (1112)
Any
MBH-MR316
Hvy.
250 (1112)
Any
Part Nu mber
Th ickness
&
Width
in . (mm)
Recom mended
To ol **
Recommend ed
Ban ding
Head
Pkg.
Qty.
MTHS-C
1
MTHS-C
1
MTHH-C
1
MTHH-C
1
Type AISI 304
• For applications that require
bundling various bundle diameters
• Supplied in reels of 250 ft. (76m)
or 1000 ft. (305m)
• Lets you bundle any size
bundle diameter
• To use, pull out as much banding
as needed, cut off with PANDUIT
GS4MT with CAMT accessory
(refer to page 9) or with shears
and install with MTHS or MTHH
banding heads (shown below)
.010 (0.25)
X
PPTMT
1000 (305) .18 (4.4)
GS4MT
ST2MT
.010 (0.25)
250 (76)
or
X
HTMT
1000 (305) .31 (7.9)
Type AISI 316
250 (76)
MTHS-C316
.010 (0.25) PPTMT
X
1000 (305)
GS4MT MTHS-C316
.18 (4.4)
ST2MT
250 (76)
or
MTHH-C316
.010 (0.25)
HTMT
X
1000 (305) .31 (7.9)
MTHH-C316
1
1
1
1
*Per Military Specification MIL-S-23190. For additional details, see page 20 .
**The GS4MT with CAMT accessory is recommended for cutting the banding. This system provides a straight cut-off
which assists in head assembly and eliminates the need for shears. Refer to pages 8, 9 and 10 for information on
installation tools.
Pkg. -MR = 1000 ft. (305m) reel and -TLR = 250 ft. (76m) reel.
Order number of reels required.
To determine the proper amount of banding r equired, use the following formula.
To Determine Length of Banding Needed
Calculate
Diameter inches (mm) X 3.14
+ 3 inches (76 mm)
Example: 10 in. (250 mm) Diameter Bundle.
10 in. (250 mm) X 3.14 = 31.40 + 3 in. (785 mm +
76 mm) = 34.40 in. or 35 in. of banding (861 mm
of banding) required.
MTHS and MTHH Banding Heads
Part Numb er
MTHS-C
MTHS-C316
MTHH-C
To use, take one end of the cut
banding and bend back ½" (13mm).
Take a self-locking head and slide it
the entire length of the band until it
reaches the bend. Bend tail flat
against bottom of banding head to
complete assembly.
MTHH-C316
D escriptio n
Loose piece banding head for standard cross section banding,
304 stainless steel.
Loose piece banding head for standard cross section banding,
316 stainless steel.
Loose piece banding head for heavy cross section banding, 304
stainless steel.
Loose piece banding head for heavy cross section banding, 316
stainless steel.
Pkg.
Qty.
Ctn .
Qty.
100
1000
100
1000
100
1000
100
1000
Refer to pages 8, 9 and 10 for information on installation tools.
Order number of banding heads required in multiples of Pkg. Qty.
Prim e moving products appe ar in BOLD .
5
PAN-STEEL ™ Coated Stainless Steel Cable Ties
Selectively Coated Stainless Steel Cable Ties — MLTC Series
Part
Numb er
MLTC2H-LP316
MLTC4H-LP316
MLTC6H-LP316
MLTC8H-LP316
MLTC10H-LP316
Material Min. Lo op
&
Ten sile
Cro ss
Strength
Section Lbs. (N *)
316
Hvy.
120 (534)
Max.
Bun dle
Dia.
in. (mm)
2.00(50)
4.00(102)
6.00(152)
8.00(203)
10.00(254)
Len gth
in. (mm)
T hickn ess Recommen ded
&
P ANDUI T
Width **
In stallation
Pkg. Ctn.
in. (mm ) Tool *** Part No. Qty. Qty.
7.9(201)
14.3(362) .010 (0.25)
20.5(521)
X
26.8(679) .31 (7.9)
33.0(838)
PPTMT
GS4MT
ST2MT
or
HTMT
50
50
50
50
50
250
250
250
250
250
*Per Military Specification MIL-S-23190.
**Base material less coating
***Refer to pages 8, 9 and 10 for information on installation tools.
Order number of ties required in multiples of Pkg. Qty.
These patented ties are designed
with a protective coating, smooth
surfaces and rounded sides
assure cable protection and
operator safety. They combine the
superior strength and corrosion
resistance necessary to withstand
even the harshest conditions,
such as severe weathering and
prolonged exposure to salt spray.
Features and Benefits:
• For communication and electrical cables
• The strength of steel, the protection of nylon;
the nylon coating provides protection for
the cable
• Available in a loop tensile strength of 120 lbs.
• Base metal is 316 grade stainless steel for
excellent resistance to temperature extremes,
corrosion, weather, chemicals, salt sprays and
UV radiation
Nylon 11 Coating:
• Excellent resistance to chemicals and
salt sprays
• Halogen-free with good self-extinguishing
properties
• Good in applications at temperatures
down to –40° F (–40° C)
• Upper temperature limit 285° F (140° C)
• Coating thickness .002 in. (.050mm) /
.006 in. (0.152mm) per side
PCS Cushion Sleeve
Black vinyl sleeving slips on
PA N -S T EEL ™ steel ties and custom
length banding and is used on
applications requiring improved
gripping on non-resilient objects,
separation between dissimilar metals,
and added bundle protection. Can be
used indoors or outdoors (excellent
ultraviolet resistance, good resistance
to petroleum and many chemicals).
Provides full separation between the ties and the material to which
you are fastening. Instructions are included with the package or
available upon request.
Part
Num ber
PCSS-CR
Used with
standard cross
section ties or
custom length
banding system
PCSH-CR
Used with heavy
cross section ties
or custom length
banding system
Width
in . (mm)
Leng th
Ft. (m)
Pkg.
Qty.
Ctn.
Qty.
0.31 (.87)
100(30.5)
1
—
.47(11.94)
100(30.5)
1
—
Bulk Pkg. -CR = 100 ft. (30.5m) reel.
Order number of reels required.
Operating Temperature Range =
41° F – 167° F
(5° C to 75° C)
6
Prim e moving products appea r in BOLD .
This isSteel
Header-18pt.
PAN-STEEL ™ Double Wrapped Stainless
Cable Ties
Double Wrapped Stainless Steel Cable Ties
— MLTDH Series
Part
Numb er
MLT2DH-L
MLT4DH-L
MLT5DH-L
1
2
Cable tie body wraps around two times entering
the locking head twice.
Material Min. L oop
&
Tensile
Cross Streng th
Section Lb s. (N *)
304
Hvy.
600
(2669)
Max.
Bundle
Dia.
in. (m m)
Thickness
&
Width
in. (mm)
Length
in. (mm )
2.00(50)
4.00(102)
5.00(125)
18.5 (470) .010 (.254)
28.0 (711)
X
34.0 (863) .31 (7.9)
Recomm en ded
PANDUIT
Installation
Pkg. Ctn.
Too l ** Part No. Qty. Qty.
PPTMT
GS4MT
ST2MT
or
HTMT
50 500
50 500
50 500
*Per Military Specification MIL-S-23190.
**Refer to pages 8, 9 and 10 for information on installation tools.
Order number of ties required in multiples of Pkg. Qty.
Double Wrapped
Stainless Steel Cable Ties
• Double wrapped stainless steel cable ties in 304 material for extra high strength in critical applications
• Double wrapped stainless steel ties allow for tighter tensioning on non-resilient bundles
• Available in .31 in. (7.9 mm) width for bundle diameters ranging from 1 in. (25 mm) – 5 in. (125 mm)
• Loop tensile strength of 600 lbs. (2669 N)
• Self-locking ties–no tools required
• Optional tooling is available to speed installation and lower installed costs (see pages 8, 9 and 10)
Photo 1
Photo 2
Double wrapped stainless steel cable ties allow the cable tie body to pass through the locking head
two times which provides extra high strength, tighter tension on non-resilient bundles (see photo 1)
and a more secure seal on rubber boots (see photo 2).
Prim e moving products appe ar in BOLD .
7
Installation Tools
Installation Tools for All
Stainless Steel Cable Ties and
Custom Length Banding System
PPTMT
A large selection of state-of-the-art installation tooling
allows you to choose the proper tool to meet all your
requirements—no matter what your application. These
tools are lightweight and easy to operate. Because they
are fast and efficient, they speed cable tie installation
and lower your total installed cost. The PANDUIT
PPTMT and GS4MT tools automatically cut off excess
tie when the pre-set tension level is reached.
PPTMT (Pneumatic)
HTMT
ST2MT
GS4MT
Part
Nu mber
PPTMT
Pkg.
Qty.
Descrip tion
Used with all PAN-ST EEL Type MLT ties, Type MLTC Coated ties, Type
MLTDH Double Wrapped ties and WAVE-TY Superior Grip ties.
™
1
™
• Automatically tensions and cuts off tie flush* when predetermined tension is
reached, providing more reliable and consistent installations.
• Ideal for high production applications
• Installs both standard .18 in. (4.4 mm) and heavy .31 in. (7.9 mm) cross
section ties with the flip of the knob. (See below.)
10 ft. (3 m) hose assembly; 1/8 in. (3.175 mm) NPT male connector
PPH10
Filter regulator
PL289N1
KPPTMTG Replacement gripper kit for PPTMT
KPPTMTB Replacement blade kit for PPTMT
1
1
1
1
*When installing over resilient objects (or made resilient by using PCS cushion sleeve).
Order number of pieces required.
Power assisted (pneumatic tool) will
automatically tension and cut off
excess tie when
predetermined tension
is reached with the
squeeze of a trigger.
Features and Benefits:
Side Entry
• Power assisted tool for fast and effortless installation
• Cable tie side entry for immediate positioning of tie
and tool (see photo)
• Controlled tension, fully adjustable
• Automatic cut-off
• One hand operation - lightweight
• Easy removal of excess tie
• Operates on 75 – 85 PSI (517-586 KPA Bar)
non-lubricated air and requires no special maintenance
Adjustment Features for PPTMT and GS4MT * Tools
Fast and Easy Selection
Tension Indicator
The crosssection of
the cable tie
being
installed is
clearly
indicated on
the knob. To change, simply flip
knob to proper cross-section
indicator.
Each crosssection of cable
ties can be
installed with a
variety of
tensions to
meet the
application.
The proper tensions (listed on
PANDUIT cable tie packages) are
clear ly marked with this indicator.
8
Prim e moving products appea r in BOLD .
To Change the Tension:
Tur n clockwise
to increase.
Turn counter-clockwise
to decrease.
* See page 9 for information on GS4MT installation tool.
This is Header-18pt.
Installation Tools
Installation Tools for All Stainless Steel Cable Ties and Custom
Length Banding System (cont.)
GS4MT
Part
Num ber
GS4MT
Pkg.
Qty.
Description
Used with all PAN-STEEL Type MLT ties, Type MLTC Coated ties, Type
MLTDH Double Wrapped ties and WAVE -TY Superior Gr ip ties.
™
1
™
• Automatically tensions and cuts off tie flush* when predetermined
tension is reached, providing more reliable and consistent
installations.
• Installs both standard .18 in. (4.4mm) and heavy .31 in. (7.9mm) cross
section ties with the flip off of the knob (see page 8).
K4M-BLD
K4MTG
CAMT
Hand Operated Tool: tool-controlled
tension and cut-off. This tool will
automatically tension and cut excess
tie when predetermined tension is
reached with the squeeze of a handle.
1
1
1
Replacement cutter blade for GS4MT
Replacement tension gripper for GS4MT
Cut-off accessory.
Use this accessory with GS4MT tool to cut
MBH or MBS continuous banding.
Accessory drops in place for use.
*When installing over resilient objects (or made resilient by using PCS cushion sleeve).
Order number of pieces required.
Features and Benefits:
•
•
•
•
•
•
•
Single handle operation for fast installation
Cable tie side entr y for immediate positioning of tie and tool (See photo)
Controlled tension, fully adjustable
Automatic cut-off
One hand operation - lightweight
Easy removal of excess tie
Qualified product listed per Militar y Standard MS90387-3 and Military
Specification MIL-T-81306A
Accessories
Tool Tension Lock Kit
Part
Num ber
TTLK3-X
Cer tain applications require a
locking device on either the selector
knob (one cross-section size and
tension only) or tension level
adjustment (but allowing crosssection size changes). This kit is
available for that pur pose.
SIDE ENTRY
Pkg.
Qty.
Description
Tool Tension Lock Kit
Each kit contains (1) #4-40 selection locking screw (with head), (1)
selection locking clip, and (1) #4-40 tension locking screw (headless).
To lock selector knob
and tension level
10
To lock fine adjustment
Order number of kits required in multiples of Pkg. Qty.
GHH Holster
Part
Nu mber
GHH
Descrip tion
Designed to hold PANDUIT GS4MT and ST2MT tools. Can also be used with
GS2B, GS4H (series), PPTS, PPTEH, and ST2EH nylon cable tie
installation tools. All leather and rivet construction for durability. Extra
tie-down strap holds tool in place, easily fits on belt. Used wherever the
hand tools are used – construction sites to assembly line for a
convenient and handy place for the tool.
Pkg.
Qty.
1
Order number of holsters required.
Prime moving prod ucts a ppear in BOLD.
9
Installation Tools
Installation Tools for All Stainless Steel Cable Ties and
Custom Length Banding System (cont.)
ST2MT
Part
N umber
ST2MT
KT2MG
Hand Operated Tool.
Installer controlled tension and cut-off.
Description
• Tool tension is controlled by installer. Flush* cut-off is made by twisting
the tool.
• Rugged, lightweight, easy-to-operate pliers-type tool provides
mechanical advantage.
• Used with all PA N -STEEL ™ type MLT ties, type MLTC coated ties,
type MLTDH double wrapped ties and WA VE-TY ™ superior grip ties.
KT2MG Replacement Gripper Kit
• Replaces tension gripper on ST2MT tool.
• Can be part of a maintenance program.
• Extends life of tool.
Pkg .
Qty.
1
1
*When installing over resilient objects (or made resilient by using PCS cushion sleeve).
Order number of pieces required.
Features and Benefits:
•
•
•
•
•
•
Single handle tr igger for fast installation
Cable tie side entry for immediate positioning of tie and tool (see photo)
One hand operation - lightweight
Installer controlled tension
Cut-off capability with the twist of the wrist
Easy removal of excess tie
SIDE ENT RY
HTMT
Part
Numb er
HTMT
Installer controlled tension.
D escriptio n
• Specially adapted screwdriver type tool is used to tension standard
and heavy cross-section ties–safely.
• Economical
• The coiled tie end remaining after tensional assures a safe end.
• Manual tension, no cut-off.
• Used with all PAN -S TEEL type MLT ties, type MLTC
coated ties, type MLTDH double wrapped ties and W AVE -TY
superior grip ties.
• Installs ties parallel to the bundle.
Pkg .
Qty.
1
Order number of tools required.
SBT
Part
Nu mber
SBT
SBT Bit only – electric
screwdriver not included.
10
Descrip tion
• Tool can be used in any electric screwdriver or nutdriver that accepts 1/4 in.
hex bits
• Used with all PA N -STE EL type MLT ties, type MLTC coated ties, type MLTDH
double wrapped ties and WAV E-TY superior grip ties.
• No cut-off – coiled tie end remaining after tensioning.
• Installs ties parallel to the bundle.
Order number of tools required.
Prime moving pro ducts appear in BOLD.
Pkg.
Qty.
1
is Header-18pt.
Markers12
PAN -STEEL ™ Stainless Steel, BrassThis
& Aluminum
Stainless Steel, Brass and Aluminum Marker Plates and Tags
• Identify pipes, conduit, valves, cables and equipment in petrochemical plants, pulp
and paper mills, refineries, offshore oil rigs and in many other harsh environments.
• All mar ker plates/tags can be custom marked by PANDUIT with one of two computer
controlled systems (laser or embosser) to provide permanent identification to resist
corrosion, abrasion and radiation (see page 13 for details).
• Use with PANDUIT PAN-STE EL ™ cable ties (refer to page 4 and 5), or with
“S” hooks, and beaded chains (refer to page 15 ) for fast installation at lowest
installed cost.
Most tags are provided with one 1/4 in. (6.35 mm) hole.
Styles
MMP350-C
MMP350H-C
MT172W38-C
Marker Plate and Tag
Part Nu mbers
Used with
PAN -S TE E L Ties
Plate/Tag Size
inches W X L (mm)
Material
Ap prox.
T hickn ess
in. (mm )
Pkg.
Qty.
Ctn.
Qty.
.010 (0.25)
100
100
100
100
100
100
100
100
100
100
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
.010 (0.25)
100
100
100
100
100
100
100
100
1000
1000
1000
1000
1000
1000
1000
1000
MMP350-C
MMP350-C316
MMP350H-C
MMP350H-C316
MMP350W38-C
MMP350W38-C316
MMP172-C
MMP172-C316
MMP172W38-C
MMP172W38-C316
MLT-S
MLT-S
MLT-S/H
MLT-S/H
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
.75
.75
.75
.75
.38
.38
.75
.75
.38
.38
X 3.50
X 3.50
X 3.50
X 3.50
X 3.50
X 3.50
X 1.72
X 1.72
X 1.72
X 1.72
(19 X 89)
(19 X 89)
(19 X 89)
(19 X 89)
(9.6 X 89)
(9.6 X 89)
(19 X 44)
(19 X 44)
(9.6 X 44)
(9.6 X 44)
304 Stainless
316 Stainless
304 Stainless
316 Stainless
304 Stainless
316 Stainless
304 Stainless
316 Stainless
304 Stainless
316 Stainless
MT350-C
MT350-C316
MT350W38-C
MT350W38-C316
MT172-C
MT172-C316
MT172W38-C
MT172W38-C316
MLT-S*
MLT-S*
MLT-S*
MLT-S*
MLT-S*
MLT-S*
MLT-S*
MLT-S*
.75
.75
.38
.38
.75
.75
.38
.38
X 3.50
X 3.50
X 3.50
X 3.50
X 1.72
X 1.72
X 1.72
X 1.72
(19 X 89)
(19 X 89)
(9.6 X 89)
(9.6 X 89)
(19 X 44)
(19 X 44)
(9.6 X 44)
(9.6 X 44)
304 Stainless
316 Stainless
304 Stainless
316 Stainless
304 Stainless
316 Stainless
304 Stainless
316 Stainless
MT338W21-Q
MTB338W21-Q
MT350W17-Q
MTB350W17-Q
MLT-S*
MLT-S*
MLT-S*
MLT-S*
2.13
2.13
1.73
1.73
X
X
X
X
3.38 (54
3.38 (54
3.50 (44
3.50 (44
X
X
X
X
86)
86)
89)
89)
304 Stainless
Brass
304 Stainless
Brass
.015 (0.38)
25
25
25
25
250
250
250
250
MMP338W21-Q
MMPB338W21-Q
MMP350W17-Q
MMPB350W17-Q
MLT-S*
MLT-S*
MLT-S*
MLT-S*
2.13
2.13
1.73
1.73
X
X
X
X
3.38 (54
3.38 (54
3.50 (44
3.50 (44
X
X
X
X
86)
86)
89)
89)
304 Stainless
Brass
304 Stainless
Brass
.015 (0.38)
25
25
25
25
250
250
250
250
MT1D-Q
MTB1D-Q
MT150D-Q
MTB150D-Q
MT213D-Q
MTB213D-Q
MLT-S*
MLT-S*
MLT-S*
MLT-S*
MLT-S*
MLT-S*
1.00
1.00
1.50
1.50
2.13
2.13
CIRCULAR (25)
CIRCULAR (25)
CIRCULAR (38)
CIRCULAR (38)
CIRCULAR (54)
CIRCULAR (54)
304 Stainless
Brass
304 Stainless
Brass
304 Stainless
Brass
.035
.040
.035
.040
.015
.015
25
25
25
25
25
25
250
250
250
250
250
250
AP350HW86-C
MLT-S/H
.86 X 3.50 (22 X 89)
Aluminum
.015 (0.38)
MT 350W17-Q
MMP338W21-Q
MT1D-Q
(0.89)
(1.02)
(0.89)
(1.02)
(0.38)
(0.38)
100 1000
AP350HW86-C
*Also used with “S” Hooks or Beaded Chains (refer to page 15 for details).
Galvanic reaction may occur between stainless steel ties and aluminum marker plates in certain environments causing the aluminum to corrode.
Order number of marker plates/tags required in multiples of Pkg. Qty.
Prime moving prod ucts a ppear in BOLD.
11
PAN-STEEL ™ Custom Marking Capabilities
Custom Marking Capabilities on PANDUIT PA N-STEEL ™ Stainless
Steel Cable Ties, Strapping, Metal Marker Plates/Tags and
Anodized Aluminum Locks*
PANDUIT stainless steel cable ties, strapping,
stainless steel, brass and aluminum marker
plates/tags and anodized aluminum locks can be
custom marked for identification of equipment,
cables, hoses, pipes, conduit, etc. in
petrochemical plants, power plants, pulp and
paper mills, breweries, and many other
applications. PANDUIT’s in-house computer
controlled custom marking systems provide
sharp, crisp, high quality legends. Sequential
numbering for serialization is available.
* Anodized aluminum locks can only be marked by the laser system.
LASER MARKING SYSTEM
EMBOSSING SYSTEM
• Used on all stainless steel cable ties,
strapping, metal marker plates/tags and
anodized aluminum locks
• Graphics capability and BOLD block letters
• Upper and lower case character capability
• Alphanumeric and sequential numbering ability
• Used on metal marker plates and tags which are
a maximum of .020 in. (0.5 mm) thick
• Excellent for applications that are exposed to
occasional painting and excessive dirt
• Upper case “raised” character capability only
• Alphanumer ic and sequential numbering ability
Character Sizes ** Available:
1/8 in. (3.18 mm) 1/4 in. (6.35 mm)
3/16 in. (4.77 mm) 5/16 in. (7.94 mm)
1/2 in. (12.7 mm)
Character Sizes** Available:
1/8 in. (3.18 mm)
3/16 in. (4.77 mm)
**Other cha racter sizes avai labl e. Co ntact Factory.
For complete product and specification information visit our website at: www.panduit.com
or call: 866-405-6659
Sold exclusively through authorized PANDUIT distributors.
12
Metal Marking Devices
Marking Devices
Metal Embossing
Tape System
Part
Number
MEHT
This is Header-18pt.
Description
Tool Kit
Kit: including tool, carrying case (1) roll each META (aluminum) and
METS4 (stainless) tape
Pkg . Ctn.
Qty. Qty.
1
kit
—
Char acters include: A B C D E F G H I J K L M N O P Q R
3/16 in. (4.76 mm)
S T U V WX Y Z 2 3 4 5 6 7 8 9 . /
Height (approx. 6 characters per inch (2.54 cm).
System includes hand operated
embossing tool and roll of 304 grade
stainless steel and aluminum tape.
META-X
Tape
1/2 in. X 16 feet (12.7 mm X 4.88 m) aluminum tape
10 50
rolls rolls
METS4-X
1/2 in. X 21 feet (12.7 mm X 6.4 m) 304 grade stainless steel tape
10 50
rolls rolls
1/2 in. X 21 feet (12.7 mm X 6.4 m) 316 grade stainless steel tape
10 50
rolls rolls
METS3-X
• Provides job-site versatility
• Can be used with PAN -STEEL™ ties
as a marker plate or a flag marker
• Excellent for on-site applications
requiring quick, easy and
permanent identification
Used with PA N-STE EL Ties and accessories*
Tool punches a single 3/16 in.
(4.76 mm) diameter hole for
standard cross section size
metal locking ties or two holes in
succession for heavy cross
section metal locking ties.
Galvanic reaction may occur between stainless steel ties and aluminum tape in certain environments causing the
aluminum to corrode.
* “S”-hooks and beaded chain can be used with the tape system. (Refer to page 15 for information.)
Order number of kits or rolls required in multiples of Pkg. Qty.
Electric Engraving Pencil
• For engraving of P AN -S TEEL stainless steel cable ties, straps, marker plates/tags,
and brass and aluminum marker plates/tags.
• Provides fast, easy permanent identification.
Part
Nu mber
Descriptio n
Pkg.
Qty.
MET
115 volt unit with carbide point
1
MET-DT
Diamond tip accessory for MET engraving tool
1
Order number of pieces required.
Prime m oving p rodu cts ap pear in BO LD.
13
Metal Marking Devices
Marking Devices (Cont.)
PANDUIT PAN -STEEL ™ stainless steel ties, strapping, marking plates/tags can be
permanently marked with additional marking devices.
Indenter Press
Part
Number
Pkg.
Qty.
Descriptio n
Press including (1) wheel
Easy-to-operate manual Indenter Press available with
interchangeable Indenter wheels in three character sizes. With the
interchangeable feature, one press and three wheel sizes can add
versatility to your marking requirements.
IMP094
IMP125
IMP187
1
1
1
Press with 3/32 in. (2.38 mm) character wheel
Press with 1/8 in. (3.18 mm) character wheel
Press with 3/16 in. (4.76 mm) character wheel
Interchangeable Wheel Kits
• For identification in
various environments
• Provides quick, easy, and
permanent identification of
PANDUIT PAN-ST EEL stainless
steel cable ties, straps, marker
plates and tags
• Interchangeable wheels
• Press includes fixtures to hold
MMP350 series marker plates,
MLT series cable ties, and MS
strapping in place to provide
high quality marking
• Tool is designed for long life
and durability
MWK094
MWK125
MWK187
3/32 in. (2.38 mm) character wheel kit (wheel and indexing gear)
1/8 in. (3.18 mm) character wheel kit (wheel and indexing gear)
3/16 in. (4.76 mm) character wheel kit (wheel and indexing gear)
1
1
1
IMP-FIX
Interchangeable fixture for MMP172, MMP338 and MT Series and the
aluminum marker plates.
1
Order number of pieces required.
Features:
•
•
•
•
Automatic table indexing
Depth adjustment screw
Cable tie and mar ker plate/tag clamping device
Interchangeable fixtures for high quality marking
Characters include:
A B C D E F G H I J K L M N O P Q R S
T U V W X Y Z & 1 2 3 4 5 6 7 8 9 0 . - /
Marker Stamp Kit
Part
Number
STK12
Pkg.
Qty.
Description
Marker stamp kit contains (100) character stamps, (1) holder and (1) carrying
case. High quality 1/8 in. (3.18 mm) nom. size steel character. Type
holder keeps type aligned and provides uniform depth of
impression. The holder takes up to 9 characters–1 1/8 in. (28.6 mm) long.
Char acters include:
A
I
R
/
4
A
I
R
4
A
J
R
5
B
J
S
.
5
B
K
S
.
5
C
K
S
,
6
C
L
T
,
6
Order number of Marker Stamp Kits required.
Prim e moving products appea r in BOLD .
D
L
U
1
7
E
M
U
1
7
E
M
U
1
7
E
N
V
2
8
E
N
W
2
8
F
N
W
2
8
F
O
X
2
9
G
O
X
3
9
The impression is made by hitting the
holder with a hammer.
For mar king PAN-ST EEL stainless steel
ties, stainless steel strapping,
stainless steel, brass and aluminum
marker plates and tags.
14
D
L
T
1
6
G
O
Y
3
9
H
P
Z
3
0
H
P
&
4
0
I
Q
/
4
0
1
This is Header-18pt.
PAN-STEEL ™ Metal Accessories
“S” Hooks and Beaded Chain
So lid Brass “S” Hooks
Part
Numb er
MSH162-C
MSH150-C
MSH125-C
Overall L en gth (mm)
Wire Diameter (mm )
Pkg .
Qty.
Ctn .
Qty.
1 5/8 in. (41.28)
1 1/2 in. (38.10)
1 1/4 in. (31.75)
.105 in. (2.67)
.105 in. (2.67)
.120 in. (3.05)
100
100
100
1000
1000
1000
Order number of hooks required in multiples of Pkg. Qty.
“S” Hook
Part
Numb er
MCB4-C
MCN4-C
Descrip tion
Solid Brass Chain
Nickel Plated Steel Chain
Extremely flexible 4 1/2 in. (114 mm) bead chain with locking link.
(Chain is #6 (3.2 mm) bead diameter)
Pkg.
Qty.
Ctn .
Qty.
100
100
1000
1000
Order number of chains required in multiples of Pkg. Qty.
Beaded Chain
KP-515 Design Kit
Part
Number
KP-515
Description
• Convenient and handy plastic kit box. Once closed, parts stay
in their compartments.
Pkg.
Qty.
1
• Durable and lightweight
• Contains:
(100) MLT2S ties
(100) MLT2H ties
(50) MMP350H marker plates
(10) PCSS-5 in. (12.7 cm) length cushion sleeve
(10) PCSH-5 in. (12.7 cm) length cushion sleeve
(1) HTMT installation tool
(1) K-505 plastic kit box
Order the number of kits required.
Includes PAN-STEEL ™ cable ties,
marker plates, HTMT installation
tool and plastic box.
Perfect for prototyping.
Prime m oving p rodu cts ap pear in BO LD.
15
Stainless Steel Mounts
MTM1H Stainless Steel Mount
Part
Nu mber
Used
with
P AN -STE E L
Ties/Strapp ing
Dimensions
in. (mm )
Mounting
Metho d
#8 (4 mm)
Screw
#10 (5 mm)
Screw
1/4 in. (6 mm)
Screw
MTM1H-C
MTM1H10-C
MTM1H25-C
Provides an entire stainless steel
attachment when used with
PANDUIT PAN -STEEL ™ steel ties or
strapping. The mount has a ver y low
profile to attach cables or bundles at
minimum height, and utilizes only
one hole for mounting.
MLT-S/H,
MS375,
or
MSC375
A
W
H
.90
(22.6)
.40
(10.2)
.17
(4.37)
Z
.176
(4.4)
.214
(5.4)
.281
(7.1)
Pkg.
Qty.
Ctn.
Qty.
100
1000
100
1000
100
1000
Order number of mounts required in multiples of Pkg. Qty.
Stainless steel screw s are recommended for fastening to avoid corrosion problems associated with dissimilar metals.
A
Features:
• Low profile
• One hole mounting
W
Material: 304 stainless steel. Consult
factor y for additional materials.
H
Z
Stainless Steel Push Mount
Push-wing mount is
used to secure
wires and cables in
pre-drilled panels,
cabinets, or frames.
Can be used when
only one side of the
panel is accessible.
The mount is
inser ted into a
pre-drilled hole and
locks in place which
speeds installation
due to the
elimination of a screw.
Part
Number
Used
with
PAN -S T E EL
Ties
MPWM-H56-Q
MLT-S/H
Dimension s
in. (mm)
Mou nting
Method
A
W
H
P
Inserted into
.98
.29
.56
pre-drilled
(24.7) (7.3) (14.2)
hole
5/16 in.
(8 mm)
.34
(8.5)
Panel
Thickness
in. (m m)
.031 (0.8)
–
.094 (2.4)
Pkg.
Qty.
Ctn.
Qty.
25
250
Order number of mounts required in multiples of Pkg. Qty.
Material: 304 stainless steel. Consult
factor y for additional materials.
Featur es:
• No tapping required
• Used where only one
side of the panel
is accessible
• Nothing to assemble
W
H
P
A
Stainless Steel Push-Button Mount
Push-button
mount is
used to
secure wires
and cables in
pre-drilled
panels,
cabinets, or
frames that have access from both
sides. Mount is inserted into a predrilled hole and locks in place which
provides a low profile stainless steel
attachment when used with a stainless
steel cable tie.
Material: 304 stainless steel. Consult
factor y for additional materials.
16
Prim e moving products appea r in BOLD .
Part
Nu mber
MBM-H25-Q
Use
with
PAN -S T E EL
Ties
MLT-S
Dimensions
in. (m m)
Mou nting
Method
A
Inserted into
.40
pre-drilled
(10.0)
hole
.250 in.
(6.4 mm)
W
H
.20
(5.0)
.26
(6.5)
Panel
Thickness
in . (mm)
.031 (0.8)
–
.125 (3.2)
Pkg .
Qty.
Ctn.
Qty.
25
250
Order number of mounts required in multiples of Pkg. Qty.
Features:
• Low profile
• No tapping required
• Designed for use only
where both sides of the
panel are accessible
H
A (dia. )
W
This is Header-18pt.
Stainless Steel Mounts
Stainless Steel 2-Way Mount
Part
Number
MTM2H-Q
Used
with
P AN -STE E L
T ies
Dimension s
in. (mm)
A
G
H
Q
Z
Mounting
Metho d
in. (m m)
.71
(18.0)
.09
(2.3)
.30
(8.0)
.35
(9.0)
.176
(4.5)
#8 (4)
screw
™
MLT-S/H
Pkg.
Qty.
Ctn.
Qty.
25
250
Order number of mounts required in multiples of Pkg. Qty.
Stainless Steel screws are recommended for fastening to avoid corrosion problems associated w ith dissimilar metals.
• Two-way mount allows
stainless steel cable ties to
be inserted from either of
two sides, providing a low
profile attachment with only
(1) -hole for maximum
holding and stability.
• Material: 304 stainless steel.
Consult factory for
additional materials.
A
Features:
• Low profile
• Single hole center mounting for
maximum holding and stability
• Maximum screw head height .09
(2.3 mm)
Q
A
G
Z
H
Stainless Steel Bulkhead Mount
• Bulkhead mount is used to
secure cables, wires, and
hoses to metal framework
of trucks, automobiles,
control panels, and
equipment where one side
of the hole is accessible.
• Material: 304 stainless
steel. Consult factory for
additional materials.
Part
Numb er
Used
with
PAN -S TE E L
Ties
MTMBH-Q
MLT-S/H
Dim ensions
in. (mm )
A
W
H
1.92
(48.5)
.21
(5.3)
.54
(13.7)
Mounting
Metho d
in. (mm )
Panel
Th ickness
in . (mm)
Pre-drill hole size
Standard cross section
MLT-S
.375 (9.5) – .500 (12.7)
Hvy. cross section
MLT-H
.500 (12.7) – .625 (15.9)
Up to
max.
.500
(12.7)
Pkg .
Qty.
Ctn.
Qty.
25
250
Order number of mounts required in multiples of Pkg. Qty.
Features:
• Zero profile
• Mounts directly to surface
• Used where only one side of the
panel is accessible
• Permanent, secure application
H
W
A
Prim e moving products appe ar in BOLD .
17
Stackable Cable Spacers
Telecommunications Installation Products
Stackable Cable Spacers
PANDUIT Cable Ties and Spacers are used to separate the
support strand from the cable or to separate two cables in
aerial lashing applications. The cable ties are available in
stainless steel and different types of nylon to meet various
environmental conditions. Some nylon cable ties are
releasable (type PRT) after installation, which means they
can be removed and reused during cable modifications.
Stackable Spacers, SAC S5-T 100 and
Stainless Ties, MLT4H-LP
Stackable
Cable Spacer
Just one part to inventory. Each spacer snaps by hand into another—increase
spacer height by 1/2 in. (12.7 mm) increments. Because there is only one part,
on-site sorting is eliminated. Can be used with up to 3/4 in. (19 mm) width
(B or C lashed cable suppor ts) in parallel or perpendicular applications.
Part
Nu mber
SACS50-T100
Used With
Cable Ties
Dimensio ns
in . (mm)
▲ See
footnote
2.08 X 1.16
(52.8 X 21.5)
Material
Colo r
Where
Used
Mounting
Metho ds
Pkg .
Qty.
Ctn.
Qty.
Weather
Resistant
Polypropylene
Black
Outdoors
Cable
Ties
200
2000
Order number of spacers required in multiples of Pkg. Qty.
▲ Stackable spacers may be installed using weather resistant Lashing T ies, weather resistant Light and Heavy Cable Ties,
DURA -TY ™ Cable Ties (see Catalog Cable T ies & Wiring Accessories SA101N275C -WC) and stainless steel cable ties
(see page 4 ).
18
Prim e moving products appea r in BOLD .
This is Header-18pt.
Stackable Spacers
Telecommunications Installation Products (Cont.)
Stackable Cable Spacers Overview
Application Features
AERIAL CABLE LASH SUPPORTS
ADVANTAGES
PANDUIT PAN-ST EEL ™ Stainless Steel Ties are used to fasten
cable and/or splice closures to the messenger strand.
•
•
•
•
FEATURES OF P AN -S T EE L STAINLESS STEEL TIES
•
•
•
•
High Strength
Long Life
Weather Resistance
Chemical Resistance
+40 years life
Unaffected by sun, acid rain or most chemicals
Up to 250 lbs. minimum loop tensile strength
Single wrap, self locking design
BENEFITS
•
•
•
•
•
•
Reduced need for periodic rework
Allows ties to be used in many different conditions
Strong for use in r ugged applications
Fast and as easy to install as cable ties
Saves time and lowers installed cost
Safe to use; will not injure installer’s hands or abrade
cable insulation
Typical Aerial Lashing Installations
Strand
Cable Tie and Spacer
(see Fig. 1)
Splice Case
Supporting Arrangement at a Splice Case
Cable Tie and Spacer
(see Fig. 2)
Strand
Cable Tie
Cable
Cable Tie
Cable
Cable
Extra Heavy
Cable Tie
Cable
Spacer
Fig. 1
Cable Tie Cable Spacer
Installed on Cable and Support Strand
Fig. 2
Cable Tie Cable Spacer
For Larger Cables
19
Stainless Steel Tie Technical Data
Physical Characteristics of Stainless Steel Cable Ties (MLT Series)
Stainless
Steel
PAN -S T EE L™
Design Criteria
Tensile Strength
73° F (23° C)
90,000 1
Color
Stainless
Flammability
Non-flammable
8
Stainless
Steel
P AN -STE EL
Design Criteria
Max. Continuous Use
Temperature
1000° F (538° C) for
304 & 316 material
and 1700° F (925° C)
for 321 material
Min. Continuous Use
Temperature
–112° F (–80° C) for
304, 316 & 321
Standard 100 lbs.
(445 N) Hvy. 250 lbs.
(1112 N)
PPTMT, GS4MT,
ST2MT and HTMT
Radiation
Resistance
2 X 10
Rads
Water Absorption
(24 hours)
None
Loop Tensile Strength
@ 120° F (49° C)
20% RH
Ultraviolet Light
Resistance
Excellent
Installation Tools
1 - ASTME8 Test Method
PANDUIT Stainless Steel Cable Tie and Strapping Approvals (At time of printing)
AGENCY
US MIL
Det Norske
Veritas
SPEC/
APPROVAL
R EQUIREMENT
APPLICA BLE
PRODUCTS
MS23109E
Dimensional,
visual, vibration,
temp. cycling,
immersion, melting
point.
MLT-S Series:
standard cross
section ties.
Salt mist test,
tensile test,
accelerated aging,
vibration tests.
All MLT & MS ties
and straps in 316
material.
Mechanical
All MLT ties.
Material
specification,
tensile test,
vibration tests.
All MLT & MS ties
and straps in both
302/304 and 316
material.
Material
specification,
dimensional,
visual.
All 316 grade MLT
cable ties, both
standard and
heavy
cross section.
Cert.
#E-1630
E-1629
Amer. Bureau
Cert. #
of Shipping 99-CH18282-X
Lloyd’s
Register of
Shipping
Cert. #
89/0123
Bureau
Veritas
Approval #
2535/4048/A0/0
AGENC Y
SPEC/
APPROVAL
REQUIREMENT
APPLICABLE
PRODUCTS
Underwriters
Laboratories
E56854
Dimensional,
tensile, temp.,
cycling, humidity.
All MLT ties.
Germanischer Lloyd
Cert. #
32666HH
Mechanical
All MLT ties.
US Coast
Guard
File No.
16703/
46-113
Mechanical
All MLT ties.
State
Electricity
Commission of
Victoria
Reference
File LA
79402
Mechanical
Various MLT
302/304 cable ties.
Australian
Standard
AS3013
Fire, mechanical
and water tests.
All MLT and MS
straps.
US
Military
MIL-T81306A
MS90387-3
Mechanical
GS4MT
Installation tools.
Registro
Italiano Novale
5/014/92
Mechanical
All MLT ties
Rigorous Tests and Physical Properties of Stainless Steel Ties
STRENGTH
PANDUIT PAN-STEEL Stainless Steel Ties are
tested per the U.S. Military Specification
MIL-S-23190, minimum loop tensile test. This
test consists of applying a tie to a split mandrel
and then measuring the force required to
separate the (2) halves until the tie fails. These
minimum loop tensile strengths are given for
the various products on pages 4 and 5.
PAN -S T EE L
MLT Part Series
Min imum Lo op
Tensile Stren gth
Standard
Hvy.
100 lbs. (445 N)
250 lbs. (1112 N)
(MLT) W
200 lbs. (890 N)
(MLTC) Hvy.
120 lbs. (534 N)
(MLTDH) Hvy.
600 lbs. (2669 N)
TEMPERATURE EXTREMES
PANDUIT PAN-ST EEL Stainless Steel
Ties are 100% stainless steel in the
alloy provided (Locking head, locking
ball and body all provided from the
same grade of mater ial ordered.)
Temp eratu re Rang es for Stain less Steel
Type 304
Type 316
Type 321
–112°F(–80°C) to 1000°F(538°C)
–112°F(–80°C) to 1000°F(538°C)
–112°F(–80°C) to 1700°F(925°C)
Various temperature tests have been successfully completed. One such test is the U.S.
Military Temperature Cycling Test per Ther mal Shock Method 107, Test Condition B of
MIL-STD-202F. This test exposes the parts from low temperature –85° F (–65°C) to high
temperature 275° F (135° C) to low temperature –85° F (–65° C). After exposure, the
parts must be free of cracks, distortions, breaks, release of locking device, and meet the
minimum loop tensile requirements.
20
MILITARY CROSS REFERENCE
(MIL-S-23190E)
PANDUIT
Part Nu mber
Curren t Military
Standard Part Num ber
MLT2S-CP
MLT2S-CP316
MLT4S-CP
MLT4S-CP316
MLT6S-CP
MLT6S-CP316
MLT8S-CP
MLT8S-CP316
M23190/3-1
M23190/3-1
M23190/3-2
M23190/3-2
M23190/3-3
M23190/3-3
M23190/3-4
M23190/3-4
This is Header-18pt.
Stainless Steel Tie Technical Data
Rigorous Tests and Physical Properties of Stainless Steel Ties ( cont.)
VIBRATION
PANDUIT PAN-ST EEL ™ Standard Cross Section ties have passed the U.S. Military random vibration Test Method 214, Test Condition
II, Letter J of MIL-STD-202. This test consists of applying par ts to a bundle and then vibrating them with random vibration for 8 hours
in each of two mutually per pendicular directions. The par ts are then subjected to fur ther temperature testing and finally have to pass
the minimum loop tensile strength test.
SALT SPRAY
PANDUIT PAN-ST EEL Stainless Steel Ties have been subjected to salt spray tests lasting hours without signs of corrosion or
reduction in performance.
OUTDOOR EXPOSURE
PANDUIT PAN-STEEL Stainless Steel Ties have been exposed outdoors at New Lenox Ilinois, USA since 1985. At the printing of this
catalog, there has been no sign of corrosion or loss of performance.
FLUID IMMERSION
PANDUIT PAN-STEEL Stainless Steel Ties were immersed in: 1–Hydraulic Fluid, 2–Turbine Fuel, 3–Lubr icating Oil, and 4–Isopropyl
Alcohol for (4) hours at temperatures of 122° F (50° C). Per U.S. Militar y Specification MIL-S-23190E, the parts were then subje cted
to and passed the minimum loop tensile test.
RADIATION
Installed cable ties of various materials have been exposed to different amounts of radiation to determine the maximum acceptabl e
limit. These tests were conducted by PANDUIT to determine the acceptability for use in var ious areas of nuclear power plants
(accumulated over 40 year life). Radiation resistance is 2X108 rads.
Chemical Resistance at 70°F (21°C) Temperature
Chemical
Arsen ic Acid
Aceton e
Aluminu m
H yd roxide
Ammo nium
C arbo nate
Ammo nium
H yd roxide
Ammo nium Nitrate
Ammo nium Sulfate
Bariu m Carbonate
304 & 316
Stain less
%
Steel
Chemical
40
E
Cider
100
E
Diochloroeth ane
AQ
E
Diethyl Ether
C.S.
5
E
Ethyl Alcohol
%
100
100
304 & 316
Stainless
Steel
C hemical
E
Methyl Alco hol
E
Methyl Ch loride
E
Methyl Eth yl Keto ne
100
E
Nap hth a
%
100
100
100
304 & 316
Stainless
Steel
C hemical
E
Sod iu m Bisulfate
E
Sod iu m Borate
E
Sod iu m Carbonate
%
10
All
5
304 & 316
Stainless
Steel
E
E
E
100
E
Sod iu m Chlorate
25
E
30-70
E
Sod iu m Chloride
2
E
Sod iu m Fluo rid e
Sod iu m Hydroxid e
Sod iu m Hyposulfite
F
E
E
5
5
E
S
10
E
Ethyl Chloride
100
E
Nitric Acid
10
A ll
E
S
E
Ethyl Glycol
Ferric Hydroxide
Ferric Nitrate
100
All
10
E
E
E
Nitro us Acid
Oleic Acid
Oxalic Acid
5
100
10
E
E
E
5
10
E
E
Ferro us Su lfate
Fuel Oil
10
100
E
E
Paraffin
Petroleum Ether
100
100
E
E
Bariu m Sulfide
Benzene
10
100
E
E
Furfu ral
Gallic Acid
E
E
Phen ol
Pho sphoric Acid
90
10
E
E
Benzoic Acid
Butyric Acid
100
50
E
E
Gasolin e
Glycerin e
100
AQ
C.S.
100
100
5
10
AQ
C.S.
Sod iu m Nitrate
5
Sod iu m Nitrite
AQ
C.S.
Sod iu m Percholate
10
Sod iu m Phosphate
5
E
E
Picric A cid
Potassium Brom id e
1
AQ
C.S.
S
S
Sod iu m Sulfate
Sod iu m Thio sulfate
Calcium
C arbo nate
Calcium Chlo rate
AQ
C.S.
10
E
Hydrocyan ic Acid
All
E
E
Stearic Acid
100
E
E
Hydrogen Peroxide
30
E
Potassium
Carbon ate 1%
Potassium Ch lorate
100
E
20
E
Hydrogen Sulfide
Dry
E
All
E
2
F
Idoform
100
E
2
E
Isopropyl Alcoho l
100
E
Jet Fuel
100
E
F
F
Lactic Acid
Lano lin
100
10
E
E
30
100
F
E
5
All
E
E
Chromic Acid
Citric Acid
5
50
E
E
Lead Acetate
Magnesium
Carbo nate
Magnesium Ch lo rid e
Magnesium Nitrate
Potassium Nitrate
Potassium
Permang anate
Potassium Sulfate
Potassium Sulfide
10
All
F
E
Propyl Alcoho l
Silver N itrate
Copp er Cyanide
10
E
Malic Acid
E
Copp er Nitrate
50
E
Mercury
AQ
C.S.
100
E
Bariu m Chloride
Bariu m Sulfate
Calcium
H yd roxide
Calcium
H yd roch lo rite
Calcium Sulfate
Carbon
Tetrachloride
Chlorine (Wet)
Chlorine (D ry)
Chloroacetic Acid
Chlorofo rm
E = Excellent
S = Satisfactory
F = Fair
E
E
E
E
AQ
C.S.
40
E
Sulfur
E
Sulfur Dioxid e
25
E
Sulfuric Acid
100
E
5
E
Sulfuric Acid
5
F
All
E
Tannic Acid
10
E
50
5
E
E
Tartaric Acid
Tetrahydrofu ran
50
100
E
E
5
AQ
C.S.
100
10
E
E
Toluen e
Xylene
100
100
F
E
E
E
Z inc Chloride
Z inc Nitrate
E
E
Sod ium Acetate
60
E
Z inc Su lfate
70
AQ
C.S.
AQ
C.S.
Sod ium Bicarbonate
All
E
Potassium
Dichromate
Potassium
Ferrocyanid e
Potassium
Hydroxide
Potassium Io dide
AQ C.S. = Aqueous Cold Saturated
All = All % Concentrations
E
21
Stainless Steel Strapping System
PANDUIT PAN-STEEL ™ Stainless Steel Strapping System
The PANDUIT PAN-ST EEL stainless steel strapping system reduces
installation time and leaves no sharp edges.
• 3 widths available: 3/8 in. (9.5 mm), 1/2 in. (12.7 mm), and
5/8 in. (15.9 mm)
• Burr-free sides
• Non-magnetic 304 stainless steel
• Designed for use in cr itical applications where radiation, weathering,
corrosion, and temperature extremes are a concern
• Temperature range: –112° F (–80° C) to 1000° F (538° C)
• Fast and reliable alternative to wing seals
Unique Patented Locking Method
Buckle design
provides a low
finished profile
After tensioning, cut
end is locked inside
buckle—no exposed
sharp edge
The PANDUIT Method Reduces Installation Time
1. Place strap around the material, inser t
tail of strap through buckle. Pull strapping
tight and bend up to hold in place. Insert
tail of strapping into tool nose section.
Squeeze handles to tension.
2. Once proper tension is reached,
maintain tension and raise tool 90° - 120°
over buckle and tur n parallel with the
bundle, cutting strap. Remove tool, press
cut end down and toward retaining tab.
Part Number
System
Example
Part
Description
(Stock Size Straps)
Strapping
22
MS
Metal
8
X
Bundle
Diameter
Reference
375 X 15
Cross Section
375 X 15 = .375 in. (9.5mm)
X .015 in. (0.38mm)
500 X 15 = .500 in. (12.7mm)
X .015 in. (0.38mm)
500 X 20 = .500 in. (12.7mm)
X .020 in. (0.51mm)
625 X 15 = .625 in. (15.9mm)
X .015 in. (0.38mm)
3. Using the closure lever on the
handle of the tool, bend retaining tab
down and over cut end. Provides
finished, safe, low profile closure.
–
L
S
Package
Qty.
Material
L = 50
Stainless Steel
S = 304
This is Header-18pt.
Stainless Steel Strapping System
PAN -STEEL ™
Stainless Steel
Strapping
Stock sizes of pre-assembled
incremental length product
available for outside bundle
diameters from 1.50 in. (38.1 mm)
up to 10 in. (254 mm).
Width
in . (mm)
Min.
L oop
Tensile
Streng th
lbs. (N)
Max.
Bundle
Dia.
in. (mm )
.015
(0.38)
.375
(9.5)
300
(1335)
2.00 (51)
4.00 (101)
6.00 (152)
8.00 (203)
10.00 (254)
10.2
16.2
22.5
28.7
35.0
(266)
(411)
(571)
(721)
(889)
MS4X500X15-LS
MS6X500X15-LS
MS8X500X15-LS
MS10X500X15-LS
.015
(0.38)
.500
(12.7)
500
(2224)
4.00 (101)
6.00 (152)
8.00 (203)
10.00 (254)
16.2
22.5
28.7
35.0
MS4X625X15-LS
MS6X625X15-LS
MS8X625X15-LS
MS10X625X15-LS
.015
(0.38)
.625
(15.9)
600
(2670)
4.00 (101)
6.00 (152)
8.00 (203)
10.00 (254)
MS4X500X20-LS
MS6X500X20-LS
MS8X500X20-LS
MS10X500X20-LS
.020
(0.51)
.500
(12.7)
500
(2224)
4.00 (101)
6.00 (152)
8.00 (203)
10.00 (254)
Thickness
in . (mm)
MS2X375X15-LS
MS4X375X15-LS
MS6X375X15-LS
MS8X375X15-LS
MS10X375X15-LS
Part
Numb er
Length
in. (mm )
Recomm ended
PANDUIT
In stallation Pkg.
Too l Part No. Qty.
Ctn.
Qty.
BT2MS75
50
50
50
50
50
250
250
250
250
250
(411)
(571)
(729)
(889)
BT2MS75
50
50
50
50
250
250
250
250
16.2
22.5
28.7
35.0
(411)
(571)
(729)
(889)
BT2MS75
50
50
50
50
250
250
250
250
16.2
22.5
28.7
35.0
(411)
(571)
(729)
(889)
BT2MS75
50
50
50
50
250
250
250
250
Material: AISI 304 non-magnetic
stainless steel.
Order number of straps required in multiples of Pkg. Qty.
AISI 316 material available upon
request. Contact factor y for details.
• Buckle design provides a low finished profile.
• After tensioning, cut end is locked inside buckle—no sharp edges.
• Buckle locked in place—won’t slip down strap.
Features:
Custom Length
Strapping System
Part
Nu mber
Thickness
in. (mm)
Width
in. (mm)
Used with
Bu ckle
Recommend ed
Too l Part No.
MS375X15-TSR
MS500X15-TSR
MS500X20-TSR
MS625X15-TSR
.015 (0.38)
.015 (0.38)
.020 (0.51)
.015 (0.38)
.375 (9.5)
.500 (12.7)
.500 (12.7)
.625 (15.9)
MSB375
MSB500
MSB500
MSB625
BT2MS75
Pkg .
Qty.
200
200
200
200
ft.
ft.
ft.
ft.
(61
(61
(61
(61
m)
m)
m)
m)
Order number of reels required.
Part
Number
For applications that require various
bundle diameters or outside bundle
diameters larger than 10 in. (254 mm).
Supplied in reels of 200 ft. (61 m), lets
you bundle any size diameter. To use,
pull out as much as needed, cut off
with shears and install with MSB
buckle. The buckle is installed by
taking one end of cut strapping and
bending it back 1/2 in. (13 mm). Take a
buckle and slide it the entire length of
strap until it reaches the bend. Bend
tail flat against bottom of strapping
head to complete assembly. The
system provides job-site versatility
with minimum inventory.
MSB375-CS
MSB500-CS
MSB625-CS
Descriptio n
Individual low profile buckles. To use, slip buckle onto strapping; turn
back extended back approximately .500 in. (13 mm) to hold in place.
To determine length of strapping to use:
Calculate diameter X 3.14 +3.50 in. (89 mm).
Example: 14 in. (350 mm) diameter
14 in. (350 mm) X 3.14 = 44 in. (1099 mm) + 3.50 in. (89 mm) = 47.50
in. (1188 mm) of strapping required.
Pkg .
Qty.
Ctn.
Qty.
100
100
100
1000
1000
1000
MSB Buckle
Order number of buckles required in multiples of Pkg. Qty.
Standard Material: AISI 304 non-magnetic stainless steel AISI 316
material available upon request. Contact factory for details. Minimum
bundle diameter 1.50 in. (38 mm).
Prime moving products appe ar in BOLD.
23
Nylon Coated Stainless Steel Strapping System
PAN -STEEL ™ Coated Stainless Steel Strapping
Min.
L oop
Tensile
Streng th
Lb s. (N)
Max.
Bund le
Dia.
in. (m m)
MSC2X375-LS1
MSC4X375-LS1 .015(0.38)
MSC6X375-LS1
MSC8X375-LS1
300
(1335)
2.00 (50)
4.00 (101)
6.00 (152)
8.00 (203)
10.48
16.18
22.47
28.75
(266)
(411)
(571)
(730)
MSC2X500-LS1
MSC4X500-LS1 .015(0.38)
MSC6X500-LS1
MSC8X500-LS1
500
(2224)
2.00 (50)
4.00 (101)
6.00 (152)
8.00 (203)
10.48
16.18
22.47
28.75
MSC2X625-LS1
MSC4X625-LS1 .015(0.38)
MSC6X625-LS1
MSC8X625-LS1
600
(2670)
2.00 (50)
4.00 (101)
6.00 (152)
8.00 (203)
10.48
16.18
22.47
28.75
Part Num ber
(Stock Sizes)
Nylon coated straps for use
in applications where:
• Additional protection is
required to prevent any
shar p edges
• Standard base material:
AISI 316 stainless steel,
non-magnetic
Strap
Th ickness*
in. (mm )
L ength
in . (mm)
Width
in . (mm)
Recom mended
PANDUIT
Installation
Pkg. Ctn.
Too l No.
Qty. Qty.
BT2MS75
50
50
50
50
250
250
250
250
(266)
(411) .500 (12.7)
(571)
(730)
BT2MS75
50
50
50
50
250
250
250
250
(266)
(411) .625 (15.9)
(571)
(730)
BT2MS75
50
50
50
50
250
250
250
250
.375 (9.5)
*Base material before coating
Order number of straps required, in multiples of Pkg. Qty.
Features:
• After tensioning cut end
locked inside buckle no exposed shar p edge
• Buckle locked in place won’t slip down strap
Installation Tool
for Strapping
(MS Series)
is
Nylon 11 Coating
• 100% coated with Black Nylon 11, coating thickness
.003 in. (0.07mm) / .005 in. (0.13mm) per side
• Halogen-free with good self-extinguishing properties
• Good in applications at temperatures down
to –40°F (–40°C)
• Excellent resistance to chemicals and salt sprays
• Upper temperature limit 285°F (140°C)
Part
Numb er
Pkg.
Qty.
Description
BT2MS75
Installation tool. Used for all widths of PANDUIT PA N-STE EL strapping.
• Durable tool tensions, cuts strapping, and secures the buckle tab.
• Narrow, lightweight—allows one hand operation in otherwise difficult
areas to install.
• Pliers-type tool provides mechanical advantage for tensioning.
• Easy to operate.
1
BT2N75
Replacement nose section for BT2MS75 tool.
• Provides the economy of repair vs. total tool replacement.
• Easy to install on tool.
1
KT2MG
Replacement tension gripper for BTMS75 tool.
• Easy to install on tool.
1
BT2MS75
Order number of pieces required.
Features:
Hand Operated Tool. Installer
controlled tension and cut-off.
24
Prim e moving products appea r in BOLD .
• Strap side entry (See photo)
• One hand tensioning and cut-off
operation - lightweight
• Installer controlled tension
• Cut-off with the twist of the wrist
• Easy removal of excess strap
• Installs all (3) sizes: 3/8 in. (9.5mm),
1/2 in. (12.7mm), and 5/8 in. (15.9mm)
SIDE ENTRY
PAN-STEEL ™ Applications
This is Header-18pt.
PANDUIT PAN-STEEL Applications
AIRCRAFT
PANDUIT PA N-STEEL Type MLT Stainless Steel Ties are used to fasten thermal
insulation blankets to jet engine manifolds and tubes.
PRIMARY BENEFIT
Installation tooling with controlled tension and auto cut-off capability (PPTMT &
GS4MT) significantly reduces cost of installation and the low weight, high strength of
the ties makes them more efficient and reliable than conventional fasteners. The
stainless steel ties have been temperature tested to over 1000° F (538° C) to provide
excellent continuous ser vice over the entire temperature range and to provide long life.
AIRCRAFT
PANDUIT PA N-STEEL Stainless Steel Ties are used to secure insulation envelopes to
ducting in aircraft fuselages.
PRIMARY BENEFIT
The ties have been tested to over 1000° F (538° C) which provides excellent
continuous ser vice over the entire operating range and the single wrap, self-locking low
weight design provides improved efficiency and reliability.
TRUCK ENGINES
PANDUIT PA N-STEEL Stainless Steel Ties are used to fasten ther mal insulation
blankets to tr uck engine exhaust pipes.
PRIMARY BENEFIT
The ties provide high strength, low profile and low weight design which are more
efficient than conventional fasteners and are temperature tested to over
1000° F (538° C) for perfor mance under continuous high temperature conditions.
AUTOMOTIVE
PANDUIT PAN-STEEL Ties are used to fasten constant velocity (CV) boots on front
wheel dr ive automobiles.
PRIMARY BENEFIT
The ties can be installed without disassembling the constant velocity (CV) joint which
saves installation time and lowers installed costs. The stainless steel ties provide
excellent weather resistance and corrosion resistance for long life with high strength
and low weight.
TELECOMMUNICATIONS
PANDUIT PAN-ST EEL Ties are used to securely fasten cables to telecommunication
towers.
PRIMARY BENEFIT
The ties provide long life, corrosion and chemical resistance in harsh environments and
temperature extremes. The self-locking design provides fast and easy installation, stateof-the-art tooling further reduces installation time.
25
PAN-STEEL ™ Applications
PANDUIT PAN-STEEL Applications (Cont.)
AUTOMOTIVE
PANDUIT PAN-STEEL WAVE-TY ™ Stainless Steel Ties and the GS4MT manual
installation tool are used to fasten heat shields on automotive exhaust
manifold assemblies.
PRIMARY BENEFIT
Manual and pneumatic installation tooling with controlled tension and automatic cutoff capability speeds installation time and lowers installed costs. The WAVE -TY
retains tension on a solid bundle where other stainless steel ties will not function.
MAINTENANCE AND REPAIR (MRO)
PANDUIT PAN -STEEL Stainless Steel Ties are used to fasten PANDUIT pipe markers
in pulp and paper mills, refineries, power plants and breweries.
PRIMARY BENEFIT
The ties provide extended ser vice life which reduces the need for periodic rework
and the single wrap self-locking design provides fast and easy installation. The
stainless steel ties provide excellent chemical resistance in harsh environments and
in high temperature extremes.
MAINTENANCE AND REPAIR (MRO)
PANDUIT Custom Marked Marker Plates attached with PAN-STEEL Ties are used to
identify conduit and circuits in petrochemical plants, pulp and paper mills, refineries,
and breweries.
PRIMARY BENEFIT
The products are mar ked to meet customer specifications with one of two computer
controlled systems (laser or embosser) which provides permanent identification to
resist corrosion, abrasion, and radiation in harsh environments.
PETROCHEMICAL PROCESSING
PANDUIT PA N-STEEL Ties, Strapping and Marker Plates are used in chemical plants
to bundle cables to cable trays and to identify conduit and cables.
PRIMARY BENEFIT
The ties provide long life, corrosion resistance and high temperature extremes and
allow the ties to be used in many different applications.
NUCLEAR PLANTS
PANDUIT PAN-STEEL Stainless Steel Ties are used to secure heat trace cable and
replace wing seal strapping methods. A complete selection of state-of-the-ar t tooling
makes installation quicker and easier and reduces the amount of exposure time for
plant maintenance personnel in containment areas.
PRIMARY BENEFIT
8
The ties have high radiation resistance (2X10 RAD) for excellent use in
containment areas.
26
PAN-STEEL ™ Applications
This is Header-18pt.
PANDUIT PAN-STEEL Applications (Cont.)
TRAFFIC SIGNALS
PANDUIT PA N-STEEL Stainless Steel Ties are used for bundling and fastening cables
to messenger strand in traffic signal applications.
PRIMARY BENEFIT
The ties provide a 40 year life which reduces the need for periodic rewor k and have
smooth fully radiused sides which are safe to use and will not injure installer’s hands
or abrade cable insulation.
AERIAL SUPPORT
PANDUIT PA N-STEEL Stainless Steel Ties are used to fasten cable and/or splice
closures to the messenger strand in aerial suppor t applications.
PRIMARY BENEFIT
The ties provide a 40 year life which reduces the need for periodic rewor k and are
unaffected by sun, acid rain, or most chemicals which allows them to be used in many
different environments.
OFFSHORE OIL
PANDUIT PA N-STEEL 316 Grade Stainless Steel Cable Ties, Straps, and Nylon 11
Coated Straps are used to fasten cables and hoses on offshore platforms.
PRIMARY BENEFIT
They provide superior corrosion protection in salt spray environments which extends
service life and reduces need for per iodic rework.
SHIPBUILDING
PANDUIT PAN-STEEL Stainless Steel Cable Ties are used to fasten cables to cable
trays and cable hangers in shipbuilding applications.
PRIMARY BENEFIT
The ties provide extended ser vice life which reduces the need for periodic rework, are
non-flammable so no toxic or harmful gases are released in case of fire and have fully
rounded sides which are safe to use and will not injure installer’s hands or abrade
cable insulation.
RAILROAD
PANDUIT PA N-STEEL Stainless Steel Ties are used to bundle, fasten, and secure
cables and hoses on trains, especially in exposed areas under neath engines and
cars that are subjected to harsh environmental conditions. Ties have passed Japanese
Industry Standard for salt spray (JIS-C-5028) and vibration (JIS-C-4031).
PRIMARY BENEFIT
The ties provide high strength with low weight and low profile for improved
efficiency and reliability and also extended ser vice life which reduces the need
for periodic rewor k.
27
Alphabetical Part No. Index & Worldwide Contacts
Part Num ber
Pag e
Num ber
Part Numb er
AP350HW86-C............................................11
BT 2MS75 ..................................................24
BT2N75
..................................................24
CAMT
....................................................9
GHH
....................................................9
................................................... 9
GS4MT
..................................................10
HT MT
IMP094
..................................................16
IMP125
..................................................16
IMP187
..................................................16
IMP-FIX
..................................................16
K4M-BLD ....................................................9
K4MTG
....................................................9
KP-515
..................................................17
KPPT MT G ....................................................8
KPPT MT B ....................................................8
KT2MG
..................................................10
KT2MG
..................................................24
MBH-MR ....................................................5
MBH-MR316 ................................................. 5
MBH-TLR ....................................................5
MBH-T LR316 ................................................ 5
MBM-H25-Q ...............................................18
MBS-MR ....................................................5
MBS-MR316 ................................................. 5
MBS-T LR ....................................................5
MBS-TLR316 ................................................ 5
MCB4-C ..................................................17
MCN4-C ..................................................17
..................................................15
MEHT
MET
..................................................15
META-X ..................................................15
MET-DT
..................................................15
METS3-X ..................................................15
METS4-X ..................................................15
MLT10DH-Q .................................................. 7
MLT10H-LP .................................................. 4
MLT10H-LP316 ............................................. 4
MLT10S-CP .................................................. 4
MLT10S-CP316 ............................................ 4
MLT10WH-LP ............................................... 4
MLT12H-Q ....................................................4
MLT12S-Q ....................................................4
MLT14H-Q ....................................................4
MLT14S-Q ....................................................4
MLT15S-Q ....................................................4
MLT1S-CP ....................................................4
MLT1S-CP316 .............................................. 4
MLT2.7WH-LP............................................... 4
MLT2.7H-LP .................................................. 4
MLT2.7S-CP ................................................. 4
MLT2DH-L ....................................................7
MLT2H-L P ....................................................4
MLT2H-L P316 .............................................. 4
MLT2S-CP ....................................................4
MLT2S-CP316 .............................................. 4
MLT2S-L ....................................................4
MLT4DH-L ....................................................7
MLT4H-L P ....................................................4
MLT4H-L P316 .............................................. 4
MLT4S-CP ....................................................4
MLT4S-CP316 .............................................. 4
MLT4S-L ....................................................4
MLT4WH -LP ................................................. 4
MLT5DH-L ....................................................7
MLT6H-L P ....................................................4
SERVING
YOU
WORLDWIDE
28
Pag e
Num ber
MLT6H-L P316 .............................................. 4
MLT6S-CP .................................................... 4
MLT 6S-CP316 .............................................. 4
MLT6WH-LP ................................................. 4
MLT8H-L P .................................................... 4
MLT8H-L P316 .............................................. 4
MLT8S-CP .................................................... 4
MLT 8S-CP316 .............................................. 4
MLT8WH-LP ................................................. 4
MLT C10H -LP316 .......................................... 6
MLTC2H-L P316 ........................................... 6
MLTC4H-L P316 ........................................... 6
MLTC6H-L P316 ........................................... 6
MLT C8H-LP316 ............................................ 6
MMP172-C ................................................. 11
MMP172-C316 ........................................... 11
MMP172W38-C .......................................... 11
MMP172W38-C316 ....................................11
MMP338W21-Q .......................................... 11
MMP350-C ................................................. 11
MMP350-C316 ........................................... 11
MMP350H-C ............................................... 11
MMP350H-C316 ......................................... 11
MMP350W17-Q .......................................... 11
MMP350W38-C .......................................... 11
MMP350W38-C316 ....................................11
MMPB338W21-Q ....................................... 11
MMPB350W17-Q ....................................... 11
MPWM-H56-Q ............................................ 18
MS10X375X15-LS ......................................23
MS10X500X15-LS ......................................23
MS10X500X20-LS ......................................23
MS10X625X15-LS ......................................23
MS2X375X15-LS ........................................ 23
MS375X15-T SR ......................................... 23
MS4X375X15-LS ........................................ 23
MS4X500X15-LS ....................................... 23
MS4X500X20-LS ........................................ 23
MS4X625X15-LS ........................................ 23
MS500X15-T SR ......................................... 23
MS500X20-T SR ......................................... 23
MS625X15-T SR ......................................... 23
MS6X375X15-LS ........................................ 23
MS6X500X15-LS ....................................... 23
MS6X500X20-LS ........................................ 23
MS6X625X15-LS ........................................ 23
MS8X375X15-LS ........................................ 23
MS8X500X15-LS ........................................ 23
MS8X500X20-LS ........................................ 23
MS8X625X15-LS ........................................ 23
MSB375-CS ............................................... 23
MSB500-CS ............................................... 23
MSB625-CS ............................................... 23
MSC2X375-LS1 ......................................... 24
MSC2X500-LS1 ......................................... 24
MSC2X625-LS1 ......................................... 24
MSC4X375-LS1 ......................................... 24
MSC4X500-LS1 ......................................... 24
MSC4X625-LS1 ......................................... 24
MSC6X375-LS1 ......................................... 24
MSC6X500-LS1 ......................................... 24
MSC6X625-LS1 ......................................... 24
MSC8X375-LS1 ......................................... 24
MSC8X500-LS1 ......................................... 24
MSC8X625-LS1 ......................................... 24
MSH125-C .................................................. 17
WORLD HEADQUARTERS
PANDUIT Corp.
17301 Ridgeland Avenue
Tinley Park, Illinois 60477-3091
United States of America
FAX: (1) 815-485-5839
Website: www.panduit.com
Prime moving products app ear in BOLD.
Part Num ber
Pag e
Nu mber
MSH150-C ................................................. 17
MSH162-C ................................................. 17
MT150D-Q ................................................. 11
MT172-C .................................................. 11
MT172-C316 .............................................. 11
MT172W38-C ............................................. 11
MT172W38-C316 ....................................... 11
MT1D-Q .................................................. 11
MT213D-Q ................................................. 11
MT338W21-Q ............................................. 11
MT350-C .................................................. 11
MT350-C316 .............................................. 11
MT350-Q0 .................................................. 12
MT350-Q1 .................................................. 12
MT350-Q10 ................................................ 12
MT350-Q2 .................................................. 12
MT350-Q4 .................................................. 12
MT350-Q49 ................................................ 12
MT350-Q5 .................................................. 12
MT350-Q6 .................................................. 12
MT350W17-Q ............................................. 11
MT350W38-C ............................................. 11
MT350W38-C316 ....................................... 11
MTB150D-Q ............................................... 11
MTB1D-Q .................................................. 11
MTB213D-Q ............................................... 11
MTB338W21-Q .......................................... 11
MTB350W17-Q .......................................... 11
MTHH-C .................................................... 5
MTHH-C316 ................................................. 5
MTHS-C .................................................... 5
MTHS-C316 ................................................. 5
MTM1H10-C ............................................... 18
MTM1H25-C ............................................... 18
MTM1H-C .................................................. 18
MTM2H-Q .................................................. 19
MTMBH-Q .................................................. 19
MWK094 .................................................. 16
MWK125 .................................................. 16
MWK187 .................................................. 16
PCSH-CR .................................................... 6
PCSS-CR .................................................... 6
PL289N1 .................................................... 8
PPH10
.................................................... 8
PPTMT
.................................................... 8
SACS50-T100 ............................................ 19
SBT
.................................................. 10
.................................................. 10
ST 2MT
ST K12
.................................................. 16
TTLK3-X .................................................... 9
EUROPEAN HEADQUARTERS
PANDUIT Europe Ltd.
West World – Westgate
London W5 1XP
United Kingdom
Phone: +44 (0) 208 601 7200
FAX: +44 (0) 208 601 7319
ASIAN HEADQUARTERS
PANDUIT Asia Pacific Pte. Ltd.
No. 60 Tuas Avenue 11
Singapore 639106
Republic of Singapore
Phone: (65) 379-6700
FAX: (65) 379-6759
工商网监
湘ICP备2023018690号
