Markets
TABLE OF CONTENTS
WW-SSCB06 (replaces SA101N16J-NL)
PAN -S TEE L ® S y st em O v er vie w
PAN-STEEL System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A1-A6
PAN-STEEL ® System for Extreme Applications Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A2-A6
®
PAN -S TEE L ® S elf-Locking S tainless S t eel Cable Ties (MLT S eries)
PAN-STEEL Self-Locking Stainless Steel Cable Ties (MLT Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B1-B10
PAN-STEEL ® Self-Locking Stainless Steel Cable Ties Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B2-B3
Enhanced PAN-STEEL ® Self-Locking Stainless Steel Cable Ties – MLT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B4-B5
Enhanced PAN-STEEL ® WAVE-TY ™ Superior Grip Stainless Steel Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B6
Custom Length Banding System MBS, MBH, MBEH and MBSH Banding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B7
MTHS, MTHH, MTHEH and MTHSH Banding Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B8
Enhanced Patented Nylon 11 Selectively Coated Ties – MLTC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B9
Fully Coated Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B9
PCS Cushion Sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B10
®
MLT Ties
PAN-STEEL ® Double Wrapped Stainless Steel Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B11-B14
PAN-STEEL ® Double Wrapped Stainless Steel Cable Ties – MLTDH Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B11
PPTMT Installation Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B12
GS4MT Installation Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B13
Tool Tension Lock Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B13
ST3MT Installation Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B14
RT1HT Installation Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B14
HTMT Installation Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B14
MS
Strapping
PAN -S TEE L ® S tainless S t eel S trapping (MS S eries)
PAN-STEEL ® Stainless Steel Strapping (MS Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C1-C7
PANDUIT ® PAN-STEEL ® Stainless Steel Strapping System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C2-C3
PAN-STEEL ® Stainless Steel Strapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C4
Custom Length Strapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C5
Buckles for Custom Length Strapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C5
PAN-STEEL ® Nylon Coated Stainless Steel Strapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C6
BT1HT Installation Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C6
BT2MS75 Installation Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C7
Marking
and
ID
PAN -S TEEL ® S y st em f or Permanent Marking and Identific a tion
PAN-STEEL ® System for Permanent Marking and Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D1-D2
Stainless Steel, Brass and Aluminum Marker Plates and Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D2
PAN-STEEL ® Custom Marking Capabilities Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D3-D5
Metal Embossing Tape System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D4
Indenter Press . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D4
Marker Stamp Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D5
KP-515 Design Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D5
Accessories
PAN -S TEEL ® S y st em A ccessories
PAN-STEEL System Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E1-E4
MTM1H Stainless Steel Tie Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E2
Stainless Steel Push Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E2
Stainless Steel Push Button Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E2
Stainless Steel 2-Way Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E3
Stainless Steel Bulkhead Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E3
Stackable Aerial Cable Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E4
®
Technical
Info
S tainless S t eel Technic al Inf orma tion
Stainless Steel Tie Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F1-F3
Physical Characteristics of Stainless Steel Cable Ties – MLT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F1
PANDUIT ® Stainless Steel Cable Tie and Strapping Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F1
Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F1
Chemical Resistance at 70° F (21°C) Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F2
Rigorous Tests and Physical Properties of Stainless Steel Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F2-F3
Military Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F3
Gage Conversion Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F3
Index
Inde x
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G1-G3
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
i
Markets
MLT Ties
PANDUIT ® PAN-STEEL ®
Stainless Steel Ties are engineered
to outlast the toughest corrosive
and environmental extremes.
MS
Strapping
Now a revolutionary new locking head design makes
them the highest rated loop tensile strength, tightest
clamping, easiest threading ball locking ties in the world.
Nylon 11 Coated Ties
The increased performance of the PAN-STEEL ® System
provides an extra margin of safety and lower installed cost.
Marking
and
ID
WAVE-TY ™ Stainless
Steel Ties
Withstands harsh environments
Unique locking ramp
Self-locking with low thread force
Fully rounded edges
Type 304 and 316 stainless steel
State-of-the-art tooling
■
■
■
■
■
■
General Purpose Ties
PANDUIT ® is a Global Leader
Providing Innovative Wire
Management Solutions.
A Revolutionary New Design in Stainless Steel Ties
Self-Locking Head Construction
Accessories
1
2
5
3
6
■
Stainless Steel Systems
■
Cable Ties and Accessories
■
Raceway Systems
■
Routing Systems
■
Identification Systems
4
Technical
Info
■
Power and Grounding Systems
1 New aggressive locking head*
Quicker locking, tighter installation
4 Extended retaining tab
Increases overall tie strength
■
Terminals
2 Exclusive lead in design*
Wider entrance for easier threading
5 Unique locking ramp
Assures locking in any position
■
Safety and Facility Solutions
3 Innovative displacement lock*
Assures superior locking strength
6 Strengthening ribs**
Stronger head increases lock strength
* Patented
** Patent Pending
Index
Military Specification
MIL-S-23190E
ii
ABS Programs
Cert. 99CH18282-X
Bureau Veritas
Det Norske Veritas Lloyd’s Register
of Shipping
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Markets
PAN-STEEL® System
The PAN-STEEL® System provides a strong, durable method of bundling, identifying and fastening,
which can be used in virtually all indoor, outdoor and underground (including direct burial)
applications, where severe environmental conditions exist. The ties are designed for use in
critical applications where strength, vibration, radiation, weathering, corrosion and temperature
extremes are a factor.
MLT Ties
• High strength
• Long life
MS
Strapping
• Weather resistant
• Chemical resistant
• Temperature extremes
• Radiation resistant
• Permanent identification
Marking
and
ID
PANDUIT ® offers unique products to meet customer needs:
Metal Locking Ties — Excellent performance in any environment
Nylon 11 Selectively Coated Ties — Strength of steel, protection of nylon
Accessories
WAVE-T Y ™ Stainless Steel Ties — Maintains a high tension grip on non-resilient objects
Fully Coated Ties — Polyester coated for additional bundle protection
Strapping — Reduces installation time and leaves no sharp edges
Mounts and accessories — Used with PAN-STEEL ® ties and straps to speed and
simplify mounting
Permanent identification products — Custom identification for harsh environments
Technical
Info
State-of-the-art tooling — Speed installation and lower installed cost
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
A1
Markets
PANDUIT ® PAN-STEEL ® Applications
AIRCRAFT
PANDUIT ® PAN-STEEL ® Stainless Steel Ties (type MLT) are used to fasten thermal insulation blankets to jet
engine manifolds and tubes.
MLT Ties
PRIMARY BENEFIT
Installation tooling with controlled tension and auto cut-off capability significantly reduces cost of
installation.The low weight, high strength of the ties makes them more efficient and reliable than
conventional fasteners.The stainless steel ties have been temperature tested to over 1000° F (538°C) to
provide excellent continuous service over the entire temperature range and to provide long life.
AIRCRAFT
MS
Strapping
PANDUIT ® PAN-STEEL ® Stainless Steel Ties are used to secure insulation envelopes to ducting in
aircraft fuselages.
PRIMARY BENEFIT
The ties have been tested to over 1000° F (538°C) which provides excellent continuous service over the
entire operating range.The single wrap, self-locking low weight design provides improved efficiency
and reliability.
Marking
and
ID
TRUCK ENGINES
PANDUIT ® PAN-STEEL ® Stainless Steel Ties are used to fasten thermal insulation blankets to truck engine
exhaust pipes.
PRIMARY BENEFIT
The ties provide high strength, low profile and low weight design, which are more efficient than
conventional fasteners.The ties are temperature tested to over 1000° F (538°C) for performance under
continuous high temperature conditions.
Accessories
AUTOMOTIVE
PANDUIT ® PAN-STEEL ® Stainless Steel Ties are used to fasten constant velocity (CV) boots on front wheel
drive automobiles.
PRIMARY BENEFIT
Technical
Info
The ties can be installed without disassembling the constant velocity (CV) joint which saves installation
time and lowers installed costs.The stainless steel ties provide excellent weather resistance and corrosion
resistance for long life with high strength and low weight.
AUTOMOTIVE
PANDUIT ® PAN-STEEL ® WAVE-TY ™ Stainless Steel Ties and the PPTMT Pneumatic Installation Tool are used to
fasten heat shields on automotive exhaust assemblies.
PRIMARY BENEFIT
Index
Pneumatic installation tooling with controlled tension and automatic cut-off capability speeds
installation time and lowers installed costs. WAVE-TY ™ Stainless Steel Ties retain tension on a solid bundle
where other stainless steel ties will not function.
A2
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Markets
PANDUIT ® PAN-STEEL ® Applications (continued)
TELECOMMUNICATIONS
PANDUIT ® PAN-STEEL ® Stainless Steel Ties are used to securely fasten cables to telecommunication towers.
PRIMARY BENEFIT
The ties provide long life, corrosion and chemical resistance in outdoor harsh environments and
temperature extremes.The self-locking design provides fast and easy installation. State-of-the-art tooling
further reduces installation time.
MLT Ties
MAINTENANCE AND REPAIR (MRO)
PANDUIT ® PAN-STEEL ® Stainless Steel Ties are used to fasten pipe markers in pulp and paper mills, refineries,
power plants and breweries.
MS
Strapping
PRIMARY BENEFIT
The ties provide extended service life, which reduces the need for periodic rework.The single wrap selflocking design provides fast and easy installation.The ties provide excellent chemical resistance in harsh
environments and in high temperature extremes.
MAINTENANCE AND REPAIR (MRO)
PANDUIT Custom Marked Marker Plates attached with PAN-STEEL Stainless Steel Ties are used to identify
conduit and circuits in petrochemical plants, pulp and paper mills, refineries, and breweries.
®
®
Marking
and
ID
PRIMARY BENEFIT
The products are marked to meet customer specifications with one of two computer controlled systems
(laser or embosser), which provides permanent identification to resist corrosion, abrasion, and radiation in
harsh environments.
Accessories
PETROCHEMICAL PROCESSING
PANDUIT ® PAN-STEEL ® Stainless Steel Ties, Strapping and Marker Plates are used in chemical plants to
bundle cables to cable trays and to identify conduit and cables.
PRIMARY BENEFIT
The ties provide long life, corrosion resistance and high temperature extremes and allow the ties to be
used in many different applications.
Technical
Info
NUCLEAR PLANTS
PANDUIT ® PAN-STEEL ® Stainless Steel Ties are used to secure heat trace cable and replace wing seal
strapping methods. A complete selection of state-of-the-art tooling makes installation quicker and easier
and reduces the amount of exposure time for plant maintenance personnel in containment areas.
PRIMARY BENEFIT
The ties have high radiation resistance (2X108 RAD) for excellent use in containment areas.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
Index
A3
Markets
PANDUIT ® PAN-STEEL ® Applications (continued)
TRAFFIC SIGNALS
PANDUIT ® PAN-STEEL ® Stainless Steel Ties are used for bundling and fastening cables to messenger strand in
traffic signal applications.
MLT Ties
PRIMARY BENEFIT
The ties provide a 40 year service life, which reduces the need for periodic rework.The smooth fully
radiused sides are safe to use and will not injure installer’s hands or abrade cable insulation.
AERIAL SUPPORT
MS
Strapping
PANDUIT ® PAN-STEEL ® Stainless Steel Ties are used to fasten cable and/or splice closures to the messenger
strand in aerial support applications.
PRIMARY BENEFIT
The ties provide a 40 year service life, which reduces the need for periodic rework.The ties are unaffected
by sun, acid rain, or most chemicals, which allows them to be used in many different environments.
Marking
and
ID
OFFSHORE OIL
PANDUIT ® PAN-STEEL ® 316 Grade Stainless Steel Cable Ties, Straps, and Nylon 11 Selectively Coated Ties are
used to fasten cables and hoses on offshore platforms.
PRIMARY BENEFIT
The ties provide superior corrosion protection in salt spray environments, which extends service life and
reduces need for periodic rework.
Accessories
SHIPBUILDING
PANDUIT ® PAN-STEEL ® Stainless Steel Cable Ties are used to fasten cables to cable trays and cable hangers in
shipbuilding applications.
PRIMARY BENEFIT
Technical
Info
The ties provide extended service life, which reduces the need for periodic rework; are non-flammable so
no toxic or harmful gases are released in case of fire; and have fully rounded sides, which are safe to use
and will not injure installer’s hands or abrade cable insulation.
RAILROAD
PANDUIT ® PAN-STEEL ® Stainless Steel Ties are used to bundle, fasten, and secure cables and hoses on
trains, especially in exposed areas underneath engines and cars that are subjected to harsh
environmental conditions.The ties have passed Japanese Industry Standard for salt spray (JIS-C-5028) and
vibration (JIS-C-4031).
PRIMARY BENEFIT
Index
The ties provide high strength with low weight and low profile for improved efficiency and reliability.The
extended service life reduces the need for periodic rework.
A4
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Markets
STAINLESS STEEL SYSTEMS
MLT Ties
METAL TIES
PAN-STEEL ® STAINLESS STEEL TIES (MLT SERIES): Metal locking ties, ball lock version in .17" (4.4mm), .25" (6.4mm),
CUSTOM LENGTH BANDING SYSTEM:
.31" (7.9mm), .50" (12.7mm), and .63" (15.9mm) widths
Provided in reels in .17" (4.4mm), .25" (6.4mm), .31" (7.9mm),
.50” (12.7mm), and .63" (15.9mm) widths
MS
Strapping
METAL STRAPS
STAINLESS STEEL STRAPS (MS SERIES):
CUSTOM LENGTH STRAPPING SYSTEM:
Fold-over buckle design in .38" (9.5mm), .50" (12.7mm) and
.63" (15.9mm) widths
Provided in reels in .375" (9.5mm), .50" (12.7mm) and
.63" (15.9mm) widths
Marking
and
ID
Accessories
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
A5
Markets
PAN-STEEL ® Self-Locking Stainless Steel
Cable Ties (MLT Series)
PANDUIT ® is a leading producer of stainless steel ties for harsh environments. New designs are
continually introduced to meet the application challenges encountered by our customers, while
providing the lowest installed cost.
• Self-locking
• Fully rounded edges
• Low thread force
• 100% Stainless Steel construction
• Patented displacement lock
• Unique locking ramp
• Patented lead-in design
• Extended retaining tab
• Patented aggressive locking head
• Patent pending strengthening ribs
• Complete line of installation tools
MLT Ties
MS
Strapping
Marking
and
ID
PANDUIT ® offers unique products to meet customer needs:
General Purpose Ties — Excellent performance in any environment
Accessories
WAVE-T Y ™ Stainless Steel Ties — Unique wave form spring maintains a high tension grip
on non-resilient objects
Patented Nylon 11 Selectively Coated Ties — Strength of steel, protection of nylon
Fully Coated Ties — Polyester coated for additional bundle protection
Double Loop Ties — Tighter tensioning and higher loop tensile strength
Complete Line of Installation Tools — Manual and pneumatic installation tools for
controlled tension, automatic cut-off and lower installed cost
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
B1
Markets
A revolutionary new design in stainless steel ties!
Engineered for the most extreme applications...
■ World's highest rated loop tensile strength ball locking tie for an extra margin of safety
■ Aggressive head design provides higher retained tension for a more secure bundle
MLT Ties
■ Exclusive lead-in design for quick, easy threading for fastest installation time
Locking head construction
New aggressive locking head*
Allows for quicker locking of the ball for
a tighter installation on all bundles.
MS
Strapping
Innovative displacement lock*
Creates an improved interference
between the ball and the tie body for
improved locking strength.
Exclusive lead-in design*
Marking
and
ID
Creates a wider entrance for the tail of
the tie, providing easier threading for
lower installed cost.
Extended retaining tab
Allows for a fully supported head design
for increased locking strength.
Unique locking ramp
Creates constant contact between the
tie and locking ball, which assures
locking in any position.
Strengthening ribs**
Integrated into the locking head, resulting
in a stronger head design and increased
lock strength.
* Patented
** Patent pending
Accessories
Advantages of the Rounded Side of PAN-STEEL ® Stainless Steel Ties
Technical
Info
Cross sectional view of other manufacturer’s tie body.
(Photo micrograph shown is magnified 150X).
Cross sectional view of PANDUIT ® tie body.
(Photo micrograph shown is magnified 150X).
The PAN-STEEL ® Stainless Steel Cable Tie is designed for superior comfort and safety when handling due
to its fully rounded sides and smooth surfaces. Smooth surfaces and rounded sides assure cable
protection and operator safety. PANDUIT ® not only removes the burr, but actually passes the material
through a secondary process which removes the top and bottom corners of the material.
Index
B2
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Markets
Self-Locking Head for Fast Installation
MLT Ties
MS
Strapping
2. Use one of the PANDUIT ® PAN-STEEL ® installation
tools to tension and cut off excess tail quickly.
1. Place tie around bundle, put tip through head and pull
up tight by hand.
The stainless steel metal locking tie series can be fastened by hand as shown in Photo 1. No tools are required.
Just place around bundle, pull the tip of the tail through the locking head and pull up tight by hand.The self-locking
head secures the tie in place.
Photo 2 shows the metal locking tie series being installed with the PANDUIT ® GS4MT tool, which automatically
tensions and cuts off excess tie.The system provides adjustable tension control and automatic cut-off for quick,
consistent and secure installation with the lowest installed cost.
Part Number System Example – MLT Series
Marking
and
ID
Accessories
(Stock Size Tie)
M LT
6
S
Part Description
CrossSection
Package Qty.
Material
Q
= 25
( blank ) = 304
Locking
Bundle
Diameter
Reference
S = Standard
L*
= 50
316
Tie
( Inches )
LH = Light Heavy
LP** = 50
H = Heavy
CP = 100
EH = Extra Heavy
*Standard Cross-Section
**Heavy Cross-Section
Metal
SH = Super Heavy
–
CP
= 316
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
B3
Markets
PAN-STEEL ® Stainless Steel Ties – MLT Series
Enhanced PAN-STEEL® Self-Locking Stainless Steel Cable Ties
• Strong, durable method of bundling and fastening
• Can be used in virtually all indoor, outdoor and
underground (including direct burial) applications
• Well suited for network bundling of data and
power cables
MLT Ties
Part Number
Max.
Bundle
Diameter
In.
mm
Min. Loop
Tensile
Length**
Strength*
In. mm Lbs.
N
• Fully rounded edges and exclusive lead-in design
• Provides ultimate support for network cables
• Available in 316 material for the most
corrosive environments
Min.
Bundle
Diameter
In. mm
Width
Thickness
In. mm In. mm
Recommended
PANDUIT ®
Installation Tool***
Std. Std.
Pkg. Ctn.
Qty. Qty.
AISI 304 Stainless Steel – For General Purpose
MS
Strapping
Standard Cross Section
1.0
MLT1S-CP
2.0
MLT2S-CP
MLT2S-L
2.0
2.7
MLT2.7S-CP
4.0
MLT4S-CP
MLT4S-L
Marking
and
ID
MLT6S-CP
MLT8S-CP
MLT10S-CP
MLT12S-Q
MLT14S-Q
MLT15S-Q
25
51
5.0
7.9
127
201
200
200
890
890
.50
.50
12.7
12.7
.18
.18
4.6
4.6
.010
.010
.25
.25
100 500
100 500
51
69
102
7.9
10.2
14.3
201
259
362
200
200
200
890
890
890
.50
.50
.50
12.7
12.7
12.7
.18
.18
.18
4.6
4.6
4.6
.010
.010
.010
.25
.25
.25
50 500
100 500
100 500
4.0
6.0
8.0
102
152
203
14.3
20.5
26.8
362
521
679
200
200
200
890
890
890
.50
.50
.50
12.7
12.7
12.7
.18
.18
.18
4.6
4.6
4.6
.010
.010
.010
.25
.25
.25
10.0
12.0
14.0
15.0
254
304
355
380
33.0 838 200
39.3 998 200
45.5 1156 200
49.2 1250 200
890
890
890
890
.50
.50
.50
.50
12.7
12.7
12.7
12.7
.18
.18
.18
.18
4.6
4.6
4.6
4.6
.010
.010
.010
.010
.25
.25
.25
.25
NEW! Light-Heavy Cross Section
MLT2LH-LP
2.0
51
7.9
MLT4LH-LP
4.0 102 14.3
MLT6LH-LP
6.0 152 20.5
MLT8LH-LP
8.0 203 26.8
Accessories
Technical
Info
Index
Heavy Cross Section
2.0
MLT2H-LP
MLT2.7H-LP
2.7
4.0
MLT4H-LP
6.0
MLT6H-LP
8.0
MLT8H-LP
10.0
MLT10H-LP
MLT12H-Q
12.0
14.0
MLT14H-Q
NEW! Extra-Heavy
MLT2EH-LP
MLT4EH-LP
MLT6EH-LP
MLT8EH-LP
MLT10EH-LP
MLT12EH-Q
MLT4EH15-LP
MLT6EH15-LP
MLT8EH15-LP
MLT10EH15-LP
MLT12EH15-Q
Cross
2.0
4.0
6.0
8.0
10.0
12.0
4.0
6.0
8.0
10.0
12.0
201
362
521
679
250
250
250
250
1112
1112
1112
1112
.50
.50
.50
.50
12.7
12.7
12.7
12.7
.25
.25
.25
.25
6.4
6.4
6.4
6.4
.010
.010
.010
.010
.25
.25
.25
.25
201
GS4MT, HTMT, PPTMT,
ST2MT or ST3MT
GS4MT, HTMT, PPTMT,
ST2MT or ST3MT
50 500
100 500
100 500
100
25
25
25
500
125
125
125
50
50
50
50
250
250
250
250
51
7.9
450
2000
.50
12.7
.31
7.9
.010
.25
50
250
69
102
152
203
254
305
356
10.2 259 450
14.3 362 450
20.5 521 450
26.8 679 450
33.0 838 450
42.0 1087 450
47.0 1194 450
2000
2000
2000
2000
2000
2000
2000
.50
.50
.50
.50
.50
.50
.50
12.7
12.7
12.7
12.7
12.7
12.7
12.7
.31
.31
.31
.31
.31
.31
.31
7.9
7.9
7.9
7.9
7.9
7.9
7.9
.010
.010
.010
.010
.010
.010
.010
.25
.25
.25
.25
.25
.25
.25
50
50
50
50
50
25
25
250
250
250
250
250
125
125
Section
51
11.8 300 600
102 17.1 434 600
152 23.4 594 600
203 29.7 754 600
254 35.9 912 600
305 42.2 1072 600
102 17.1 434 700
152 23.4 594 700
203 29.7 754 700
254 35.9 912 700
305 42.2 1072 700
2670
2670
2670
2670
2670
2670
3115
3115
3115
3115
3115
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
.50
.50
.50
.50
.50
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
.010
.010
.010
.010
.010
.010
.015
.015
.015
.015
.015
.25
.25
.25
.25
.25
.25
.38
.38
.38
.38
.38
50
50
50
50
50
25
50
50
50
50
25
250
250
250
250
250
125
250
250
250
250
125
.50
.50
.50
.50
.50
.50
GS4MT, HTMT, PPTMT,
ST2MT or ST3MT
RT1HT or ST3MT
*Per SAE Standard AS23190/3 (formerly MIL). For additional details, refer to page F1.
**Other lengths available, contact customer service.
***For information on installation tools, refer to pages B12-B14.
B4
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Markets
Enhanced PAN-STEEL ® Self-Locking Stainless Steel Cable Ties (continued)
MLT Ties
Part Number
Max.
Bundle
Diameter
In.
mm
Min. Loop
Tensile
Length**
Strength*
In. mm Lbs.
N
NEW! Super-Heavy Cross Section
MLT4SH-LP
4.0 102 17.1
MLT6SH-LP
6.0 152 23.4
MLT8SH-LP
MLT10SH-LP
MLT12SH-Q
8.0
10.0
12.0
203
254
305
434
594
Min.
Bundle
Diameter
In. mm
Width
Thickness
In. mm In. mm
900
900
4005
4005
1.0
1.0
25.4
25.4
.63
.63
15.9 .015
15.9 .015
.38
.38
29.7 754 900
35.9 912 900
42.2 1072 900
4005
4005
4005
1.0
1.0
1.0
25.4
25.4
25.4
.63
.63
.63
15.9 .015
15.9 .015
15.9 .015
.38
.38
.38
Recommended
PANDUIT ®
Installation Tool***
Std. Std.
Pkg. Ctn.
Qty. Qty.
50
50
250
250
50
50
25
250
250
125
GS4MT, HTMT, PPTMT,
ST2MT or ST3MT
100
100
100
100
100
100
500
500
500
500
500
500
GS4MT, HTMT, PPTMT,
ST2MT or ST3MT
50
50
50
50
250
250
250
250
GS4MT, HTMT, PPTMT,
ST2MT or ST3MT
50
50
50
50
50
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
RT1HT
MS
Strapping
AISI 316 Stainless Steel – For Superior Corrosion Resistance
Standard Cross Section
1.0
MLT1S-CP316
2.0
MLT2S-CP316
4.0
MLT4S-CP316
6.0
MLT6S-CP316
MLT8S-CP316
8.0
MLT10S-CP316
10.0
5.0
7.9
14.3
20.5
26.8
33.0
127
201
362
521
679
838
200
200
200
200
200
200
890
890
890
890
890
890
.50
.50
.50
.50
.50
.50
12.7
12.7
12.7
12.7
12.7
12.7
.18
.18
.18
.18
.18
.18
4.6
4.6
4.6
4.6
4.6
4.6
.010
.010
.010
.010
.010
.010
.25
.25
.25
.25
.25
.25
NEW! Light-Heavy Cross Section
MLT2LH-LP316
2.0
51
7.9
MLT4LH-LP316
4.0 102 14.3
MLT6LH-LP316
6.0 152 20.5
MLT8LH-LP316
8.0 203 26.8
201
362
521
679
250
250
250
250
1112
1112
1112
1112
.50
.50
.50
.50
12.7
12.7
12.7
12.7
.25
.25
.25
.25
6.4
6.4
6.4
6.4
.010
.010
.010
.010
.25
.25
.25
.25
Heavy Cross Section
2.0
MLT2H-LP316
4.0
MLT4H-LP316
6.0
MLT6H-LP316
MLT8H-LP316
8.0
MLT10H-LP316
10.0
7.9
14.3
20.5
26.8
33.0
201
362
521
679
838
450
450
450
450
450
2000
2000
2000
2000
2000
.50
.50
.50
.50
.50
12.7
12.7
12.7
12.7
12.7
.31
.31
.31
.31
.31
7.9
7.9
7.9
7.9
7.9
.010
.010
.010
.010
.010
.25
.25
.25
.25
.25
NEW! Extra-Heavy Cross Section
MLT2EH-LP316
2.0
51
11.8
MLT4EH-LP316
4.0 102 17.1
MLT6EH-LP316
6.0 152 23.4
MLT8EH-LP316
8.0 203 29.7
MLT4EH15-LP316
4.0 102 17.1
MLT6EH15-LP316
6.0 152 23.4
MLT8EH15-LP316
8.0 203 29.7
300
434
594
754
434
594
754
600
600
600
600
700
700
700
2670
2670
2670
2670
3115
3115
3115
1.0
1.0
1.0
1.0
1.0
1.0
1.0
25.4
25.4
25.4
25.4
25.4
25.4
25.4
.50
.50
.50
.50
.50
.50
.50
12.7
12.7
12.7
12.7
12.7
12.7
12.7
.010
.010
.010
.010
.015
.015
.015
.25
.25
.25
.25
.38
.38
.38
RT1HT or ST3MT
50
50
50
50
50
50
50
NEW! Super-Heavy
MLT4SH-LP316
MLT6SH-LP316
MLT8SH-LP316
434
594
754
900
900
900
4005
4005
4005
1.0
1.0
1.0
25.4
25.4
25.4
.63
.63
.63
15.9 .015
15.9 .015
15.9 .015
.38
.38
.38
RT1HT
50
50
50
Cross
4.0
6.0
8.0
25
51
102
152
203
254
51
102
152
203
254
Section
102 17.1
152 23.4
203 29.7
*Per SAE Standard AS23190/3 (formerly MIL). For additional details, refer to page F1.
**Other lengths available, contact customer service.
***For information on installation tools, refer to pages B12-B14.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
Marking
and
ID
Accessories
Technical
Info
Index
B5
Markets
Enhanced PAN-STEEL ® WAVE-TY ™ Superior Grip Stainless Steel Ties
• Patented wave-form spring maintains greater
installed tension on non-resilient objects
• Tightly clamps on applications where other
stainless steel ties will not function
• Retains tension on a solid bundle with minimal
applied force
MLT Ties
Part Number
Max.
Bundle
Diameter
In.
mm
Min. Loop
Tensile
Length**
Strength*
In. mm Lbs.
N
Min.
Bundle
Diameter
In. mm
• Available in 316 material for the most
corrosive environments
• Guarantees performance in critical applications
• Self-locking with low thread force
Width
Thickness
In. mm In. mm
Recommended
PANDUIT ®
Installation Tool***
Std. Std.
Pkg. Ctn.
Qty. Qty.
AISI 304 Stainless Steel – For Superior Grip on Rigid Bundles
NEW! Standard Cross Section
MS
Strapping
MLT2.7WS-LP
MLT4WS-LP
MLT6WS-LP
MLT8WS-LP
2.7
4.0
6.0
8.0
69
102
152
203
10.2
14.3
20.5
26.8
259
362
521
679
200
200
200
200
890
890
890
890
2.0
2.0
2.0
2.0
51
51
51
51
.18
.18
.18
.18
4.6
4.6
4.6
4.6
.010
.010
.010
.010
.25
.25
.25
.25
GS4MT, HTMT, PPTMT,
ST2MT or ST3MT
50
50
50
50
250
250
250
250
GS4MT, HTMT, PPTMT,
ST2MT or ST3MT
50
50
50
50
250
250
250
250
GS4MT, HTMT, PPTMT,
ST2MT or ST3MT
50
50
50
50
50
250
250
250
250
250
GS4MT, HTMT, PPTMT,
ST2MT or ST3MT
50
50
50
50
250
250
250
250
250
250
250
250
250
250
250
250
NEW! Light-Heavy Cross Section
Marking
and
ID
MLT2.7WLH-LP
MLT4WLH-LP
MLT6WLH-LP
MLT8WLH-LP
2.7
4.0
6.0
8.0
69
102
152
203
10.2
14.3
20.5
26.8
259
362
521
679
250
250
250
250
1112
1112
1112
1112
2.0
2.0
2.0
2.0
51
51
51
51
.25
.25
.25
.25
6.4
6.4
6.4
6.4
.010
.010
.010
.010
.25
.25
.25
.25
69
102
152
203
254
10.2
14.3
20.5
26.8
33.0
259
362
521
679
838
450
450
450
450
450
2000
2000
2000
2000
2000
2.0
2.0
2.0
2.0
2.0
51
51
51
51
51
.31
.31
.31
.31
.31
7.9
7.9
7.9
7.9
7.9
.010
.010
.010
.010
.010
.25
.25
.25
.25
.25
259
362
521
679
200
200
200
200
890
890
890
890
2.0
2.0
2.0
2.0
51
51
51
51
.18
.18
.18
.18
4.6
4.6
4.6
4.6
.010
.010
.010
.010
.25
.25
.25
.25
Heavy Cross Section
MLT2.7WH-LP
MLT4WH-LP
MLT6WH-LP
MLT8WH-LP
MLT10WH-LP
2.7
4.0
6.0
8.0
10.0
NEW! Standard Cross Section
Accessories
MLT2.7WS-LP316
MLT4WS-LP316
MLT6WS-LP316
MLT8WS-LP316
2.7
4.0
6.0
8.0
69
102
152
203
10.2
14.3
20.5
26.8
NEW! Light-Heavy Cross Section
MLT2.7WLH-LP316
MLT4WLH-LP316
MLT6WLH-LP316
MLT8WLH-LP316
2.7
4.0
6.0
8.0
69
102
152
203
10.2
14.3
20.5
26.8
259
362
521
679
250
250
250
250
1112
1112
1112
1112
2.0
2.0
2.0
2.0
51
51
51
51
.25
.25
.25
.25
6.4
6.4
6.4
6.4
.010
.010
.010
.010
.25
.25
.25
.25
GS4MT, HTMT, PPTMT,
ST2MT or ST3MT
50
50
50
50
69
102
152
203
10.2
14.3
20.5
26.8
259
362
521
679
450
450
450
450
2000
2000
2000
2000
2.0
2.0
2.0
2.0
51
51
51
51
.31
.31
.31
.31
7.9
7.9
7.9
7.9
.010
.010
.010
.010
.25
.25
.25
.25
GS4MT, HTMT, PPTMT,
ST2MT or ST3MT
50
50
50
50
Heavy Cross Section
Technical
Info
MLT2.7WH-LP316
MLT4WH-LP316
MLT6WH-LP316
MLT8WH-LP316
2.7
4.0
6.0
8.0
*Per SAE Standard AS23190/3 (formerly MIL). For additional details, refer to page F1.
**Other lengths available, contact customer service.
Application Tool (PANDUIT ® GS4MT shown).
***For information on installation tools, refer to page B12-B14.
Index
During installation, wave
spring is being stretched
by application tool.
B6
Order number of pieces required, in multiples of Standard Package Quantity.
After installation, wave spring
contracts, resulting in superior
grip on rigid surfaces.
Prime items appear in BOLD.
Markets
PAN-STEEL ® Custom Length Banding System (Coated and Non-Coated)
Custom Length Banding System MBS, MBH, MBEH and MBSH Banding
• For applications that require bundling various bundle diameters
• Supplied in reels of 200 ft (61m), 250 ft (76m) or 1000 ft (305m)
• Bundle any size bundle diameter
• To use, pull out as much banding as needed, cut off using GS4MT
with CAMT accessory or with shears and install with MTHS or MTHH
banding heads
Part Number
Max.
Bundle
Diameter
In.
mm
Length**
Ft.
M
Min. Loop
Tensile
Strength*
Lbs.
N
Min.
Bundle
Diameter
In. mm
Polyester coating option provides:
• Low smoke
• Halogen free
• Temperature tolerance -40°F (-40°C) to
-302°F (150°C)
• Good UV resistance
Width
Thickness
In. mm In. mm
Recommended
PANDUIT ®
Installation Tool***
&
LE OR
ND CT UT
HA TRA -O
K
RE OC
KN
10mm
20mm
30mm
40mm
50mm
60mm
70mm
80mm
90mm
100mm
110mm
120mm
130mm
140mm
150mm
160mm
170mm
180mm
190mm
200mm
210mm
220mm
230mm
240mm
250mm
MLT Ties
Std.
Recommended Pkg.
Banding Head Qty.
AISI 304 Stainless Steel – For General Purpose Banding
Standard Cross Section
MBS-TLR
Any
Any
250
76
100
445
.50
12.7
.18
4.4
.010
.25
MBS-MR
Any
Any 1000 305
100
445
.50
12.7
.18
4.4
.010
GS4MT,HTMT,PPTMT,
.25
ST2MT, ST3MT
.25
MTHS-C
1
MTHS-C
1
MTHH-C
1
MTHH-C
1
MS
Strapping
Heavy Cross Section
MBH-TLR
Any
Any
250
76
250
1112
.50
12.7
.31
7.9
.010
MBH-MR
Any
Any 1000 305
250
1112
.50
12.7
.31
7.9
.010
76
300
1335
1.0
25.4
.50
12.7 .010
.25
RT1HT, ST3MT
MTHEH-C
1
61
450
2000
1.0
25.4
.63
15.9 .015
.38
RT1HT
MTHSH-C
1
.25
MTHS-C316
1
MTHS-C316
1
MTHH-C316
1
MTHH-C316
1
GS4MT,HTMT,PPTMT,
.25
ST2MT, ST3MT
NEW! Extra-Heavy Cross Section
MBEH-TLR
Any
Any
250
NEW! Super-Heavy Cross Section
MBSH-TR
Any
Any
200
Marking
and
ID
AISI 316 Stainless Steel – For Superior Corrosion Resistence
Standard Cross Section
MBS-TLR316
Any
Any
250
76
100
445
.50
12.7
.18
4.4
.010
MBS-MR316
Any
Any 1000 305
100
445
.50
12.7
.18
4.4
.010
GS4MT,HTMT,PPTMT,
.25
ST2MT, ST3MT
.25
Heavy Cross Section
MBH-TLR316
Any
Any
250
76
250
1112
.50
12.7
.31
7.9
.010
MBH-MR316
Any
Any 1000 305
250
1112
.50
12.7
.31
7.9
.010
76
300
1335
1.0
25.4
.50
12.7 .010
.25
RT1HT, ST3MT
MTHEH-C316
1
61
450
2000
1.0
25.4
.63
15.9 .015
.38
RT1HT
MTHSH-C316
1
GS4MT,HTMT,PPTMT,
.25
ST2MT, ST3MT
Accessories
NEW! Extra-Heavy Cross Section
MBEH-TLR316
Any
Any
250
NEW! Super-Heavy Cross Section
MBSH-TR316
Any
Any
200
NEW! Polyester Coated AISI 316 Stainless Steel
Heavy Cross Section
MBCH-QR316
Any
Any
82
25
250
1112 N/A
N/A
.31
7.9
.010
.25
GS4MT, HTMT,
PPTMT, ST2MT or
ST3MT
MTHH-C316
1
NEW! Extra-Heavy Cross Section
MBCEH-QR316 Any Any 82
25
300
1335 N/A
N/A
.50
12.7 .010
.25
RT1HT, ST3MT
MTHEH-C316
1
NEW! Super-Heavy Cross Section
MBCSH-QR316 Any Any 82
25
450
2000 N/A
N/A
.63
15.9 .015
.38
RT1HT
MTHSH-C316
1
*Per SAE Standard AS23190/3 (formerly
MIL). For additional details, refer to page F1.
**The GS4MT with CAMT accessory is
recommended for cutting the banding.
This system provides a straight cut-off
which assists in head assembly and
eliminates the need for shears.
***For information on installation tools,
refer to pages B12-B14.
To determine the proper amount of banding required, use the following formula
to determine length of banding needed
Calculate
Technical
Info
Index
Diameter inches (mm) x 3.14 + 3 inches (76mm)
Example: 10 in. (250mm) Diameter Bundle
10 in. (250mm) x 3.14 = 31.40 + 3 in. (785mm + 76mm) = 34.40 in. or 35 in. (861mm) of banding required.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
B7
Markets
Custom Length Banding Dispenser System
KNOCK-OUT
HANDLE LOCATION
(BOTH SIDES)
&
E R
DL TO T
N
C
U
H A T R A -O
K
R E OC
KN
MS
Strapping
10mm
20mm
30mm
40mm
50mm
60mm
70mm
80mm
90mm
100mm
110mm
120mm
130mm
140mm
150mm
160mm
170mm
180mm
190mm
200mm
210mm
220mm
230mm
240mm
250mm
TAB
CUT-OFF
1.0
FOLD OVER
RETAINER TAB
DIAMETER
CUT-OFF GUIDE
DIAMETER
MARKERS(MM)
MLT Ties
METRIC
MEASURE
1D
(25.4)
10.0
1"
H
RE AN
KN TR DLE
OC AC &
K- TOR
OU
T
2"
3"
4"
10.0
5"
2D
(50.8)
6"
7"
8"
9"
3D
(76.2)
ENGLISH MEASURE
Marking
and
ID
MTHS, MTHH, MTHEH and MTSH Banding Heads
• To use, take one end of the cut banding and
bend back 1/2" (13mm)
• Take a self-locking head and slide it the entire
length of the band until it reaches the bend
Accessories
Part Number
• Bend tail flat against bottom of banding head to
complete assembly
Std. Std.
Pkg. Ctn.
Qty. Qty.
Part Description
AISI 304 Stainless Steel – For Banding Heads
Loose piece banding head for standard cross section banding 304
MTHS-C
stainless steel.
Technical
Info
Index
B8
100 1000
MTHH-C
Loose piece banding head for heavy cross section banding 304
stainless steel.
100 1000
MTHEH-C
Loose piece banding head for extra–heavy cross section banding 304
stainless steel.
100 1000
MTHSH-C
Loose piece banding head for super heavy cross section banding 304
stainless steel.
100 1000
AISI 316 Stainless Steel – For Banding Heads
MTHS-C316
Loose piece banding head for standard cross section banding 316
stainless steel.
100 1000
MTHH-C316
Loose piece banding head for heavy cross section banding 316
stainless steel.
100 1000
MTHEH-C316
Loose piece banding head for extra–heavy cross section banding 316
stainless steel.
100 1000
MTHSH-C316
Loose piece banding head for super heavy cross section banding 316
stainless steel.
100 1000
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Markets
PAN-STEEL ® Coated Stainless Steel Cable Ties
Enhanced Patented Nylon 11 Selectively Coated Ties – MLTC Series
• For communication and electrical cables
• Strength of steel, the protection of nylon; the nylon
coating provides protection for the cables
• Available in loop tensile strength of 250 lbs.
• Base metal 316 grade stainless steel for excellent
resistance to temperature extremes, corrosion,
weather, chemicals, salt sprays and UV radiation
Part Number
Max. Bundle
Diameter
In.
mm
Min. Loop
Min. Bundle
Tensile
Length
Strength*
Diameter
In. mm Lbs.
N
In.
mm
Width
In. mm
Nylon 11 Coating:
• Resistance to chemicals and salt sprays
• Halogen-free
• Temperature tolerance -40°F (-40°C)
to 285°F (140°C)
• Coating thickness .003 in. (.08mm) / .005 in.
(.13mm) per side
Thickness
**
In. mm
Recommended
PANDUIT ®
Installation Tool***
MLT Ties
Std. Std.
Pkg. Ctn.
Qty. Qty.
AISI 316 Stainless Steel – For Nylon 11 Selectively Coated Cable Ties
Heavy Cross Section
MLTC2H-LP316
MLTC4H-LP316
MLTC6H-LP316
MLTC8H-LP316
MLTC10H-LP316
2.0
4.0
6.0
8.0
10.0
51
102
152
203
254
7.9
14.3
20.5
26.8
33.0
201
362
521
679
838
250
250
250
250
250
1112
1112
1112
1112
534
.50
.50
.50
.50
.50
12.7
12.7
12.7
12.7
12.7
.31
.31
.31
.31
.31
7.9
7.9
7.9
7.9
7.90
.010
.010
.010
.010
.010
.25
.25
.25
.25
.25
GS4MT, HTMT, PPTMT,
ST2MT or ST3MT
50
50
50
50
50
250
250
250
250
250
MS
Strapping
*Per SAE Standard AS23190/3 (formerly MIL). For additional details, refer to page F1.
**Base material less coating.
***For information on installation tools, refer to pages B12-B14.
Fully Coated Ties
•
•
•
•
Part Number
• Low smoke
• Halogen free
• Temperature tolerance -40°F (-40°C) to -302°F
(150°C)
• Good UV resistance
Polyester coating
Base metal 316 grade stainless steel
Self-locking with low thread force
Available in standard, light-heavy, heavy, and
extra-heavy cross sections
Max.
Bundle
Diameter
In.
mm
Min. Loop
Tensile
Length
Strength*
In. mm Lbs.
N
Min.
Bundle
Diameter
In. mm
Width
In. mm
Thickness**
In.
mm
Recommended
PANDUIT ®
Installation Tool***
Std. Std.
Pkg. Ctn.
Qty. Qty.
Accessories
NEW! Standard Cross Section
MLTFC2S-CP316
MLTFC4S-CP316
MLTFC6S-CP316
MLTFC8S-CP316
2.0
4.0
6.0
8.0
51
102
152
203
Marking
and
ID
7.9
14.3
20.5
26.8
201
362
521
679
100
100
100
100
445
445
445
445
.50
.50
.50
.50
12.7
12.7
12.7
12.7
.18
.18
.18
.18
4.6
4.6
4.6
4.6
.010
.010
.010
.010
.25
.25
.25
.25
100
GS4MT, HTMT, PPTMT, 100
100
ST2MT, or ST3MT
100
500
500
500
500
7.9
14.3
20.5
26.8
201
362
521
679
150
150
150
150
668
668
668
668
.50
.50
.50
.50
12.7
12.7
12.7
12.7
.25
.25
.25
.25
6.4
6.4
6.4
6.4
.010
.010
.010
.010
.25
.25
.25
.25
50
50
50
50
250
250
250
250
7.9
14.3
20.5
26.8
201
362
521
679
250
250
250
250
1112
1112
1112
1112
.50
.50
.50
.50
12.7
12.7
12.7
12.7
.31
.31
.31
.31
7.9
7.9
7.9
7.9
.010
.010
.010
.010
.25
.25
.25
.25
GS4MT, HTMT, PPTMT,
ST2MT, or ST3MT
50
50
50
50
250
250
250
250
300
434
574
754
300
300
300
300
1335
1335
1335
1335
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
.50
.50
.50
.50
12.7
12.7
12.7
12.7
.010
.010
.010
.010
.25
.25
.25
.25
RT1HT or ST3MT
50
50
50
50
250
250
250
250
NEW! Light-Heavy Cross Section
MLTFC2LH-LP316
MLTFC4LH-LP316
MLTFC6LH-LP316
MLTFC8LH-LP316
2.0
4.0
6.0
8.0
51
102
152
203
GS4MT, HTMT, PPTMT,
ST2MT, or ST3MT
Technical
Info
NEW! Heavy Cross Section
MLTFC2H-LP316
MLTFC4H-LP316
MLTFC6H-LP316
MLTFC8H-LP316
2.0
4.0
6.0
8.0
51
102
152
203
NEW! Extra-Heavy Cross Section
MLTFC2EH-LP316
MLTFC4EH-LP316
MLTFC6EH-LP316
MLTFC8EH-LP316
2.0
4.0
6.0
8.0
51
102
152
203
11.8
17.1
23.4
29.7
Index
*Per SAE Standard AS23190/3 (formerly MIL). For additional details, refer to page F1.
**Base material less coating.
***For information on installation tools, refer to pages B12-B14.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
B9
Markets
PCS Cushion Sleeve
MLT Ties
• Black vinyl sleeving slips on standard and
heavy cross section PAN-STEEL ® Stainless
Steel Ties and Custom Length Banding
• Used on applications requiring improved
gripping on non-resilient objects
• Can be used indoors or outdoors (excellent
ultraviolet resistance, good resistance to
petroleum, and many chemicals)
• Provides full separation between the ties and
the material to which you are fastening
• Operating temperature range 41°F – 167°F
(5°C to 75°C)
Part Number
In.
mm
Ft.
M
Std.
Pkg.
Qty.
PCSS-CR
.31
.87
100
30.5
1
PCSH-CR
.47
11.9
100
30.5
1
Width
MS
Strapping
Length
Bulk Pkg. –CR = 100 ft. (30.5m) reel.
Marking
and
ID
Accessories
Technical
Info
Index
B10
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Markets
PAN-STEEL ® Double Wrapped Stainless Steel Cable Ties
PAN-STEEL ® Double Wrapped Stainless Steel Cable Ties — MLTDH Series
• Available in 304 and 316 stainless steel for extra
high strength in critical applications
• Allow for tighter tensioning on
non-resilient bundles
• Available in .31 in. (7.9mm), .50 in. (12.7mm),
.625 in. (15.9mm) width for bundle diameters
ranging from 1-8 in. (203mm)
• Loop tensile strength up to 1200 lbs. (5340 N)
• Self-locking ties — no tools required
• Optional tooling is available to speed installation
and lower installed costs
MLT Ties
Cable tie body passes through
head two times
Part Number
Max.
Bundle
Diameter
In.
mm
Min. Loop
Tensile
Length** Strength*
In. mm Lbs. N
Min.
Bundle
Diameter
In. mm
Width
Thickness
In. mm In. mm
Recommended
PANDUIT ®
Installation Tool***
Std. Std.
Pkg. Ctn.
Qty. Qty.
AISI 304 Stainless Steel — MLTDH Double Wrapped Ties
Heavy Cross Section
MLT2DH-L
MLT4DH-L
MLT5DH-L
2.0
4.0
5.0
50
102
125
18.5 470
28.0 711
34.0 863
600 2670 1.0
600 2670 1.0
600 2670 1.0
25.4
25.4
25.4
.31
.31
.31
7.9
7.9
7.9
.010
.010
.010
.25
.25 GS4MT, HTMT, PPTMT,
ST2MT, or ST3MT
.25
50
50
50
250
250
250
29.5
41.5
53.5
29.5
41.5
53.5
800
800
800
1000
1000
1000
25.4
25.4
25.4
25.4
25.4
25.4
.50
.50
.50
.50
.50
.50
12.7
12.7
12.7
12.7
12.7
12.7
.010
.010
.010
.015
.015
.015
.25
.25
.25
.38
.38
.38
RT1HT, ST3MT
25
25
25
25
25
25
125
125
125
125
125
125
25.4 .625 15.9 .015
25.4 .625 15.9 .015
25.4 .625 15.9 .015
.38
.38
.38
RT1HT
25
25
25
125
125
125
MS
Strapping
NEW! Extra-Heavy Cross Section
MLT4DEH-Q
MLT6DEH-Q
MLT8DEH-Q
MLT4DEH15-Q
MLT6DEH15-Q
MLT8DEH15-Q
4.0
6.0
8.0
4.0
6.0
8.0
102
152
203
102
152
203
749
1054
1359
749
1054
1359
3560
3560
3560
4450
4450
4450
1.0
1.0
1.0
1.0
1.0
1.0
Marking
and
ID
NEW! Super-Heavy Cross Section
MLT4DSH-Q
MLT6DSH-Q
MLT8DSH-Q
4.0
6.0
8.0
102
152
203
29.5 749 1200 5340 1.0
41.5 1054 1200 5340 1.0
53.5 1359 1200 5340 1.0
AISI 316 Stainless Steel — For MLTDH Double Wrapped Ties
NEW! Extra-Heavy Cross Section
MLT4DEH-Q316
MLT6DEH-Q316
MLT8DEH-Q316
MLT4DEH15-Q316
MLT6DEH15-Q316
MLT8DEH15-Q316
4.0
6.0
8.0
4.0
6.0
8.0
102
152
203
102
152
203
29.5
41.5
53.5
29.5
41.5
53.5
749
1054
1359
749
1054
1359
800
800
800
1000
1000
1000
3560
3560
3560
4450
4450
4450
1.0
1.0
1.0
1.0
1.0
1.0
Accessories
25.4
25.4
25.4
25.4
25.4
25.4
.50
.50
.50
.50
.50
.50
12.7
12.7
12.7
12.7
12.7
12.7
.010
.010
.010
.015
.015
.015
.25
.25
.25
.38
.38
.38
25.4 .625 15.9 .015
25.4 .625 15.9 .015
25.4 .625 15.9 .015
.38
.38
.38
RT1HT, ST3MT
25
25
25
25
25
25
125
125
125
125
125
125
RT1HT
25
25
25
125
125
125
NEW! Super-Heavy Cross Section
MLT4DSH-Q316
MLT6DSH-Q316
MLT8DSH-Q316
4.0
6.0
8.0
102
152
203
29.5 749 1200 5340 1.0
41.5 1054 1200 5340 1.0
53.5 1359 1200 5340 1.0
Technical
Info
*Per SAE Standard AS23190/3 (formerly MIL). For additional details, refer to page F1.
**Other lengths available, contact customer service.
***For information on installation tools, refer to pages B12-B14.
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
B11
Markets
Installation Tools for All Stainless Steel Cable
Ties and Custom Length Banding System
MLT Ties
A large selection of state-of-the-art installation tooling allows
you to choose the proper tool to meet all your requirements,
no matter what your application. These tools are lightweight
and easy to operate. Because they are fast and efficient they
speed cable tie installation and lower your total installed cost.
The PANDUIT ® PPTMT and GS4MT tools automatically cut off
excess tie when the pre-set tension level is reached.
ST3MT, PPTMT, HTMT, GS4MT, RT1HT
MS
Strapping
PPTMT Installation Tool
• Power assisted tool for fast and
effortless installation
• Cable tie side entry for immediate positioning
of tie and tool
• Controlled tension, fully adjustable
• Automatic cut-off
Marking
and
ID
Part Number
Std.
Pkg.
Qty.
Part Description
PPTMT
Pneumatic hand tool used with PAN-STEEL ® Type MLT ties, Type MLTC
coated ties, Type MLTDH double wrapped ties and WAVE-TY ™ Stainless Steel
Ties. Automatically tensions and cuts off tie when predetermined tension is
reached, providing more reliable and consistent installations.
Ideal for high production applications. Installs standard .18 in. (4.6mm),
light-heavy .25 in. (6.4mm) and heavy .31 in. (7.9mm) cross section ties.
1
PPH10
PL289N1
KPPTMTG
KPPTMTB
10 ft. (3 m) hose assembly; 1/8 in. (3.175 mm) NPT male connector
Filter regulator
Replacement gripper kit for PPTMT
Replacement blade kit for PPTMT
1
1
1
1
PPTMT (Pneumatic)
Power assisted (pneumatic tool) will
automatically tension and cut off
excess tie when predetermined
tension is reached with the squeeze
of a trigger.
Accessories
• One hand operation — lightweight
• Easy removal of excess tie
• Operates 85 PSI - 586 KPA Bar non-lubricated
air and requires no special maintenance
Side Entry
Technical
Info
Index
B12
Adjustment Features for PPTMT and GS4MT Tools*
Fast and Easy Selection
Tension Indicator
The crosssection of the
cable tie being
installed is
clearly indicated
on the knob.
To change,
simply flip knob to proper crosssection indicator.
Each crosssection of cable
ties can be
installed with a
variety of
Turn clockwise
Turn counter-clocktensions to meet
to increase.
wise to decrease.
the application.
The proper tensions (listed on
PANDUIT ® cable tie packages) are
*For information on GS4MT installation tool, refer to page B13.
clearly marked with this indicator.
Order number of pieces required, in multiples of Standard Package Quantity.
To Change the Tension:
Prime items appear in BOLD.
Markets
GS4MT Installation Tool
• Single handle operation for fast installation
• Cable tie side entry for immediate positioning
of tie and tool
• Controlled tension, fully adjustable
• Easy removal of excess tie
• Qualified product listed per SAE
Standard MS90387-3
Part Number
• Automatically tensions and cuts off tie when
predetermined tension is reached, providing
more reliable and consistent installations*
• Installs standard .18 in. (4.6mm), light-heavy
.25 in. (6.4mm) and heavy .31 in. (7.9mm)
cross section ties
Part Description
Std.
Pkg.
Qty.
GS4MT
Used with standard, light-heavy and heavy cross section PAN-STEEL ® Type
MLT ties, Type MLTC Coated ties, Type MLTDH Double Wrapped ties and
WAVE-TY ™ Stainless Steel Ties.
1
K4M-BLD
Replacement cutter blade for GS4MT
1
K4MTG
Replacement tension gripper for GS4MT
1
CAMT
Cut-off accessory. Use this accessory with GS4MT tool to cut MBH or MBS
continuous banding. Accessory drops in place for use.
1
Hand Operated Tool
MLT Ties
MS
Strapping
* When installing over resilient objects (or made resilient by using PCS cushion sleeve.
Marking
and
ID
SIDE ENTRY
CAMT
Tool Tension Lock Kit
Accessories
• For applications requiring a locking device on
either the selector knob (one cross-section
size and tension only) or tension level
adjustment (but allow cross-section
size changes)
Part Number
To lock selector knob and
tension level
TTLK3
• Replacement blade kits and gripper
replacement kits can be part of a scheduled
maintenance plan or used when cut-offs are
not clean and crisp
Part Description
Tool Tension Locking Kit for GS4MT and PPTMT installation tools.
Std.
Pkg.
Qty.
1
Technical
Info
To lock fine adjustment
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
B13
Markets
ST3MT Installation Tool
• Cable tie side entry for immediate
positioning of tie and tool
• One hand operation — lightweight
• Easy removal of excess tie
• Tool tension is controlled by installer.
Lever actuated cut-off
• Rugged, lightweight, easy-to-operate
pliers-type tool provides
mechanical advantage
MLT Ties
Part Number
Hand operated tool with installer
controlled tension and cut-off.
Std.
Pkg.
Qty.
Part Description
ST3MT
Used with standard, light-heavy, heavy, and extra-heavy cross section
PAN-STEEL ® Type MLT ties, Type MLTC coated ties, Type MLTDH double
wrapped ties and WAVE-TY ™ Stainless Steel Ties.
1
KT3MG
Replacement tension gripper for ST3MT tool.
1
MS
Strapping
RT1HT Installation Tool
• Cable tie side entry for immediate positioning
of tie and tool
• One or two hand tensioning with multi-position
rear handle
• Adjustable tension control
Marking
and
ID
Hand operated tool with adjustable
tension control and lever cut-off.
Part Number
RT1HT
•
•
•
•
Lever actuated cut-off
Easy removal of excess tie
Ratchet style tool for high tension
Rugged, lightweight, easy-to-operate ratchet
tool provides mechanical advantage
Part Description
Used with extra-heavy and super-heavy cross section PAN-STEEL ® Type MLT
ties, Type MLTFC coated ties and type MLTDH double wrapped ties.
Std.
Pkg.
Qty.
1
Accessories
HTMT Installation Tool
• Economical
• The coiled tie end remaining after tensioning
assures a safe end
Technical
Info
Part Number
HTMT
Installer controlled tension.
• No sharp edges
• Manual tension, no cut-off
• Installs ties parallel to the bundle
Std.
Pkg.
Qty.
Part Description
Used with standard, light-heavy and heavy cross section PAN-STEEL ® Type
MLT ties, Type MLTC coated ties, Type MLTDH double wrapped ties and
WAVE-TY ™ Stainless Steel Ties.
1
Index
B14
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Markets
PAN-STEEL ® Stainless Steel Strapping
(MS Series)
PANDUIT ® continues to provide innovative products that create the ultimate solution for
strapping applications. A new buckle design and tension controlled installation tool offer a
quick and safe installation for all harsh environments applications.
MLT Ties
• Increased loop tensile strength for an extra margin of safety
• Increased retained tension for a more secure bundle
MS
Strapping
• No sharp edges after installation
• Simplified installation versus ear lock straps
• Fully assembled discrete lengths
Marking
and
ID
PANDUIT ® offers unique products to meet customer needs:
General Purpose Straps — Excellent performance in any environment, available in three widths
Fully Coated Straps — Strength of steel with the protection and safety of nylon
Accessories
Custom Length Strapping System — For use with large bundles
Installation Tool — For controlled tension, lever cut-off and lower installed cost
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
C1
Markets
PANDUIT ® PAN-STEEL ® Stainless Steel Strapping System
The PANDUIT ® PAN-STEEL ® Stainless Steel Strapping System reduces
installation time and leaves no sharp edges.
•
•
•
•
3 widths available: 3/8 in. (9.5mm), 1/2 in. (12.7mm), and 5/8 in. (15.9mm)
Burr-free sides
304 and 316 stainless steel
Designed for use in critical applications where strength, radiation, weathering,
corrosion, and temperature extremes are a concern
• Temperature range: -112°F (-80°C) to 1000°F (538°C)
MLT Ties
MS
Strapping
Unique Patented Locking Method
After tensioning, cut end is
locked inside buckle — no
exposed sharp edge
Buckle design provides a low
finished profile
Marking
and
ID
Hooked Clamping Tab*
Bends strap body within retention
area of buckle for increased loop
tensile strength and full coverage
of cut end of strap
•
Accessories
•
Concave Cross-section*
Enhanced support to
improve tensile strength
Cross Rib Support*
Enhanced rigidity for higher
loop tensile strength
•
•
•
Technical
Info
Concave Buckle Recess*
Increases body resistance for
increased loop tensile strength
*Patents Pending
Index
C2
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Markets
The PANDUIT ® Method Reduces Installation Time
MLT Ties
3. Remove tool, press cut end down and
toward retaining tab.
2. Once proper tension is reached,
maintain tension and raise tool 90° – 120°
over buckle and pull down on cutter lever,
cutting strap.
1. Place strap around the material, insert
tail of strap through buckle. Pull strapping
tight and bend up to hold in place. Insert
tail of strapping into tool nose section.
Squeeze handle to tension.
MS
Strapping
Marking
and
ID
4. Using the closure lever on the handle of the tool, bend retaining tab down and over cut
end. Provides finished, safe, low profile closure.
Part Number System Example
Accessories
Discrete Length Part Numbering System
MS
Part Description
Metal
Strap
(C=Coated)
(blank=Uncoated)
4
Bundle
W
38
Width
Inches
T
Thickness
15
15 = 0.015"
L
4
Package
Material
Diameter
38 = 3/8
Qty.
4 = 304 SS
Inches
50 = 1/2
63 = 5/8
L = 50 Pcs.
6 = 316 SS
Stainless Steel Coil Part Number System
MS
W
Part Description
Width
50
T
Inches
Thickness
Metal
38 = 3/8
Strap
(C=Coated)
(blank=Uncoated)
50 = 1/2
63 = 5/8
15
15 = 0.015”
CR
6
Package
Material
Qty.
4 = 304 SS
QR = 25m
Technical
Info
6 = 316 SS
CR = 100 ft
Stainless Steel Buckle Part Number System
MS
W
63
C
4
Width
Inches
Package
Material
Metal
38 = 3/8
Qty.
4 = 304 SS
Strap
50 = 1/2
63 = 5/8
C = 100 Pcs
6 = 316 SS
Part Description
B
B = Buckle
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
Index
C3
Markets
PAN-STEEL ® Stainless Steel Strapping
• Buckle design provides a low
finished profile
• After tensioning, cut end is locked inside buckle
— no sharp edges
• Buckle locked in place — will not slip
down strap
• Available in 316 material for the most
corrosive environments
MLT Ties
Part Number
MS
Strapping
Marking
and
ID
Accessories
Technical
Info
Max.
Bundle
Diameter
In.
mm
Length
In.
mm
Min. Loop
Tensile
Strength*
Lbs.
N
Min.
Bundle
Diameter
In.
mm
Width
In.
mm
Thickness
In.
mm
Recommended
PANDUIT ®
Std. Std.
Installation
Pkg. Ctn.
Tool
Qty. Qty.
AISI 304 Stainless Steel
MS2W38T15-L4
2.0
MS4W38T15-L4
4.0
MS6W38T15-L4
6.0
MS8W38T15-L4
8.0
MS10W38T15-L4 10.0
MS4W50T15-L4
4.0
MS6W50T15-L4
6.0
MS8W50T15-L4
8.0
MS10W50T15-L4 10.0
MS4W63T15-L4
4.0
MS6W63T15-L4
6.0
MS8W63T15-L4
8.0
MS10W63T15-L4 10.0
51
102
152
203
254
102
152
203
254
102
152
203
254
11.8
18.0
24.4
30.7
37.0
18.0
24.4
30.7
37.0
18.0
24.4
30.7
37.0
300
457
620
780
790
457
620
780
940
457
620
780
940
500
500
500
500
500
700
700
700
700
800
800
800
800
2225
2225
2225
2225
2225
3115
3115
3115
3115
3560
3560
3560
3560
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
.38
.38
.38
.38
.38
.50
.50
.50
.50
.63
.63
.63
.63
9.5
9.5
9.5
9.5
9.5
12.7
12.7
12.7
12.7
15.9
15.9
15.9
15.9
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.38
.38
.38
.38
.38
.38
.38
.38
.38
.38
.38
.38
.38
50
50
50
50
50
50
BT1HT, BT2MS75 50
50
50
50
50
50
50
250
250
250
250
250
250
250
250
250
250
250
250
250
AISI 316 Stainless Steel
MS2W38T15-L6
2.0
MS4W38T15-L6
4.0
MS6W38T15-L6
6.0
MS8W38T15-L6
8.0
MS10W38T15-L6 10.0
MS4W50T15-L6
4.0
MS6W50T15-L6
6.0
MS8W50T15-L6
8.0
MS10W50T15-L6 10.0
MS4W63T15-L6
4.0
MS6W63T15-L6
6.0
MS8W63T15-L6
8.0
MS10W63T15-L6 10.0
51
102
152
203
254
102
152
203
254
102
152
203
254
11.8
18.0
24.4
30.7
37.0
18.0
24.4
30.7
37.0
18.0
24.4
30.7
37.0
300
457
620
780
940
457
620
780
940
457
620
780
940
500
500
500
500
500
700
700
700
700
800
800
800
800
2225
2225
2225
2225
2225
3115
3115
3115
3115
3560
3560
3560
3560
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
.38
.38
.38
.38
.38
.50
.50
.50
.50
.63
.63
.63
.63
9.5
9.5
9.5
9.5
9.5
12.7
12.7
12.7
12.7
15.9
15.9
15.9
15.9
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.38
.38
.38
.38
.38
.38
.38
.38
.38
.38
.38
.38
.38
50
50
50
50
50
50
BT1HT, BT2MS75 50
50
50
50
50
50
50
250
250
250
250
250
250
250
250
250
250
250
250
250
*Per SAE Standard AS23190/3 (formerly MIL). For additional details, refer to pages F1.
Index
C4
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Markets
Custom Length Strapping
Min. Loop
Tensile Str.*
Lbs.
N
Part Number
• For applications that require
various bundle diameters
• Supplied in reels of 100 ft. (30.5m)
and 82.5 ft. (25m)
• 304 and 316 stainless steel
• Provides job-site versatility with
minimum inventory
• Available with Nylon 11 coating or
PPA 571 coating for additional
edge protection
Width
Thickness**
In. mm
In.
mm
304 Stainless Steel
MSW38T15-CR4
500 2225 .38
MSW50T15-CR4
500 2225 .50
MSW63T15-CR4
500 2225 .63
316 Stainless Steel
MSW38T15-CR6
700 3115 .38
MSW50T15-CR6
700 3115 .50
MSW63T15-CR6
700 3115 .63
Nylon Coated Custom Length Strapping
MSCNW38T15-QR6
800 3560 .38
MSCNW50T15-QR6
800 3560 .50
MSCNW63T15-QR6
800 3560 .63
PPA Coated Custom Length Strapping
MSCW38T15-QR6
800 3560 .38
MSCW50T15-QR6
800 3560 .50
MSCW63T15-QR6
800 3560 .63
Used with
Buckle
Std.
Pkg.
Qty.***
Tool
9.5
12.7
15.9
.015
.015
.015
.38
.38
.38
MSBW38-C4
BT1HT,
MSBW50-C4
BT2MS75
MSBW63-C4
1
1
1
9.5
12.7
15.9
.015
.015
.015
.38
.38
.38
MSBW38-C6
BT1HT,
MSBW50-C6
BT2MS75
MSBW63-C6
1
1
1
9.5
12.7
15.9
.015
.015
.015
.38
.38
.38
MSBW38-C6
BT1HT,
MSBW50-C6
BT2MS75
MSBW63-C6
1
1
1
9.5
12.7
15.9
.015
.015
.015
.38
.38
.38
MSBW38-C6
BT1HT,
MSBW50-C6
BT2MS75
MSBW63-C6
1
1
1
MLT Ties
MS
Strapping
*Per SAE Standard AS23190/3 (formerly MIL). For additional details, refer to page F1.
**Base metal less coating
***Order number of reels required in multiples of Standard Package Quantity.
Custom Length Banding Dispenser System
KNOCK-OUT
HANDLE LOCATION
(BOTH SIDES)
10mm
20mm
30mm
40mm
50mm
60mm
70mm
80mm
90mm
100mm
110mm
120mm
130mm
140mm
150mm
160mm
170mm
180mm
190mm
200mm
210mm
220mm
230mm
240mm
250mm
Marking
and
ID
FOLD OVER
RETAINER TAB
DIAMETER
CUT-OFF GUIDE
10.0
DIAMETER
MARKERS(MM)
&
LE OR
ND CT UT
A
A
H TR -O
K
RE OC
KN
METRIC MEASURE
1.0
TAB
CUT-OFF
1"
H
RE AN
KN TR DLE
OC AC &
K- TOR
OU
T
2"
3"
1D
(25.4)
4"
10.0
5"
Accessories
6"
2D
(50.8)
7"
8"
9"
3D
(76.2)
ENGLISH MEASURE
Buckles for Custom Length Strapping
• Buckle design provides a low
finished profile
• After tensioning cut end is locked
inside buckle
Part Number
Material
MSBW50-C4
MSBW38-C4
MSBW63-C4
MSBW38-C6
MSBW50-C6
MSBW63-C6
304
304
304
316
316
316
Width
In.
mm
.50
.38
.63
.38
.50
.63
Technical
Info
• No exposed sharp edge
12.7
9.5
15.9
9.5
12.7
15.9
Part Description
Individual low profile buckles. To use, slip
buckle onto strapping; turn back
extended back approximately 2 in.
(51 mm) to hold in place.
Std. Std.
Pkg. Ctn.
Qty. Qty.
100
100
100
100
100
100
1000
1000
1000
1000
1000
1000
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
Index
C5
Markets
PAN-STEEL ® Nylon Coated Stainless Steel Strapping
• The strength of steel, the protection of nylon;
the nylon coating provides protection for
the bundles
• Available in loop tensile strength up to
800 lbs. (3560N)
Nylon 11 Coating
• 100% coated with Black Nylon 11, coating thickness .003 in. (.07 mm) / .005 in.
(.13 mm) per side
• Halogen-free
• Good in applications at temperatures down to – 40° F (– 40° C)
• Excellent resistance to chemicals and salt sprays
• Upper temperature limit 285° F (140° C)
MLT Ties
MS
Strapping
Marking
and
ID
• Base metal is 316 grade stainless steel for
excellent resistance to temperature extremes,
corrosion, weather, chemicals, salt sprays and
UV radiation
Part Number
Max.
Bundle
Diameter
In.
mm
Length
In.
mm
Min. Loop
Tensile
Strength*
Lbs.
N
Min.
Bundle
Diameter
In.
mm
Width**
Thickness**
In.
mm
In.
mm
Recommended
PANDUIT ®
Installation Tool
Std. Std.
Pkg. Ctn.
Qty. Qty.
MSC4W38T15-L6
MSC6W38T15-L6
MSC8W38T15-L6
MSC10W38T15-L6
4.0
6.0
8.0
10.0
102
152
203
254
18.0
24.4
30.7
37.0
457
620
780
940
500
500
500
500
2225
2225
2225
2225
1.0
1.0
1.0
1.0
25.4
25.4
25.4
25.4
.38
.38
.38
.38
9.5
9.5
9.5
9.5
.015
.015
.015
.015
.38
.38
.38
.38
50
50
50
50
250
250
250
250
MSC4W50T15-L6
MSC6W50T15-L6
MSC8W50T15-L6
MSC10W50T15-L6
MSC6W63T15-L6
MSC4W63T15-L6
MSC8W63T15-L6
MSC10W63T15-L6
4.0
6.0
8.0
10.0
6.0
4.0
8.0
10.0
102
152
203
254
152
102
203
254
18.0
24.4
30.7
37.0
24.4
18.0
30.7
37.0
457
620
780
940
620
457
780
940
500
500
500
500
800
800
800
800
3115
3115
3115
3115
3560
3560
3560
3560
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
.50
.50
.50
.50
.63
.63
.63
.63
12.7
12.7
12.7
12.7
15.9
15.9
15.9
15.9
.015
.015
.015
.015
.015
.015
.015
.015
.38
.38
.38
.38
.38
.38
.38
.38
50
50
50
50
50
50
50
50
250
250
250
250
250
250
250
250
BT1HT, BT2MS75
*Per SAE Standard AS23190/3 (formerly MIL). For additional details, refer to page F1.
** Base material before coating
BT1HT Installation Tool for Strapping (MS Series)
Accessories
•
•
•
•
•
•
Technical
Info
Hand operated tool. Adjustable tension
control and lever actuated cut-off.
Strap side entry (see photo)
One or two hand tensioning with multi-position rear handle
Adjustable tension control
Lever actuated cut-off
Easy removal of excess strap
Installs all (3) sizes: 3/8 in. (9.5mm), 1/2 in. (12.7mm) and 5/8 in. (15.9mm)
Part Number
BT1HT
Std.
Pkg.
Qty.
Part Description
Installation tool. Used for all widths of PANDUIT ® PAN-STEEL ® strapping.
Tensions, cuts strapping, and secures the buckle tab. Ratchet-type tool
provides mechanical advantage for tensioning. Easy to operate.
1
Index
C6
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Markets
BT2MS75 Installation Tool for Strapping (MS Series)
•
•
•
•
•
Strap side entry (see photo)
One or two hand tensioning with multi-position rear handle
Lever actuated cut-off
Easy removal of excess strap
Installs all (3) sizes: 3/8 in. (9.5mm), 1/2 in. (12.7mm) and 5/8 in. (15.9mm)
MLT Ties
Part Number
Part Description
Std.
Pkg.
Qty.
BT2MS75
Installation tool. Used for all widths of PANDUIT ® PAN-STEEL ® strapping.
Tensions, cuts strapping, and secures the buckle tab. Allows one hand
operation in otherwise difficult areas to install. Pliers-type tool provides
mechanical advantage for tensioning. Easy to operate.
1
BT2N75
Replacement nose section for BT2MS75 tool. Provides the economy of repair
vs. total tool replacement. Easy to install on tool.
1
KT2MG
Replacement tension gripper for BT2MS75 and ST2MT tool. Easy to install
on tool. Can be part of a maintenance program. Extends life of tool.
1
BT2MS75
MS
Strapping
Marking
and
ID
Accessories
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
C7
Markets
PAN-STEEL ® System for Permanent
Marking and Identification
The PAN-STEEL® System can be used to identify pipes, conduit, valves, cables and equipment in
petrochemical plants, pulp and paper mills, refineries, offshore oil rigs and in many other
harsh environments. It is designed to work with PANDUIT ® MLT ties to provide the ultimate
permanent identification solution.
MLT Ties
• Long life
• Weather resistant
MS
Strapping
• Chemical resistant
• Temperature extremes
• Radiation resistant
Marking
and
ID
PANDUIT ® offers unique products to meet customer needs:
Custom laser marking — Sharp, crisp, high quality legends
Accessories
Custom embossing — For rough and dirty applications
On-site marking devices — For quick and easy identification
Marker plates and tags — Sizes and styles for virtually all applications
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
D1
Markets
Stainless Steel, Brass and Aluminum Marker Plates and Tags
• Identify pipes, conduit, valves, cables and equipment in petrochemical plants, pulp and paper
mills, refineries, offshore oil rigs and in any other harsh environments
• All marker plates/tags can be custom marked by PANDUIT ® with one of two computer
controlled systems (laser or embosser) to provide permanent identification to resist corrosion,
abrasion and radiation
• Use with PANDUIT ® PAN-STEEL ® Stainless Steel Cable Ties for fast installation at lowest
installed cost
MLT Ties
Most tags are provided with one
.25 in. (6.35mm) hole.
MMP350H-C
MT350W17-Q
MMP350-C
MT1D-Q
MT172W38-C
MMP338W21-Q
MS
Strapping
Part Number
Accessories
Technical
Info
Plate/Tag Size
Width
Length
In.
mm
In.
mm
MLT-S
MLT-S
MLT-S/H
MLT-S/H
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
MLT-S
.75
.75
.75
.75
.38
.38
.75
.75
.38
.38
.75
.75
.38
.75
.75
.38
2.13
2.13
1.73
1.73
2.13
2.13
1.73
1.00
Circular
19
19
19
19
10
10
19
19
10
10
19
19
10
19
19
10
54
54
44
44
54
54
44
25
3.50
3.50
3.50
3.50
3.50
3.50
1.72
1.72
1.72
1.72
3.50
3.50
3.50
1.72
1.72
1.72
3.38
3.38
3.50
3.50
3.38
3.38
3.50
—
89
89
89
89
89
89
44
44
44
44
89
89
89
44
44
44
86
86
89
89
86
86
89
—
MTB1D-Q
MLT-S
1.00
Circular
25
—
—
MT150D-Q
MLT-S
1.50
Circular
38
—
MTB150D-Q
MLT-S
1.50
Circular
38
MT213D-Q
MLT-S
2.13
Circular
MTB213D-Q
MLT-S
MLT-S/H*
MMP350-C
MMP350-C316
MMP350H-C
MMP350H-C316
Marking
and
ID
Used with
PAN-STEEL ®
Ties
MMP350W38-C
MMP350W38-C316
MMP172-C
MMP172-C316
MMP172W38-C
MMP172W38-C316
MT350-C
MT350-C316
MT350W38-C316
MT172-C
MT172-C316
MT172W38-C
MT338W21-Q
MTB338W21-Q
MT350W17-Q
MTB350W17-Q
MMP338W21-Q
MMPB338W21-Q
MMP350W17-Q
MT1D-Q
Index
AP350HW86-C
Thickness
In.
mm
Material
304
316
304
316
304
316
304
316
304
316
304
316
316
304
316
304
304
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.25
.38
.38
.38
.38
.38
.38
.38
.89
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
25
25
25
25
25
25
25
25
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
250
250
250
250
250
250
250
250
Brass
.040
1.02
25
250
—
304 Stainless Steel
.035
.89
25
250
—
—
Brass
.040
1.02
25
250
54
—
—
304 Stainless Steel
.015
.38
25
250
2.13
Circular
54
—
—
Brass
.015
.38
25
250
.86
22
3.50
89
Aluminum
.015
.38
100 1000
304
304
304
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Std. Std.
Pkg. Ctn.
Qty. Qty.
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.015
.015
.015
.015
.015
.015
.015
.035
304
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Brass
Stainless
Brass
Stainless
Brass
Stainless
Stainless
AP350HW86-C
Steel
Steel
Steel
Steel
*Galvanic reaction may occur between stainless steel ties and aluminum marker plates in certain environments causing the aluminum to corrode.
D2
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Markets
PAN-STEEL ® Custom Marking Capabilities
Custom Marking Capabilities on PANDUIT ® PAN-STEEL® Stainless Steel Cable Ties,
Strapping, Metal Marker Plates/Tags and Anodized Aluminum Locks*
MLT Ties
PANDUIT ® stainless steel cable ties, strapping, stainless steel,
brass and aluminum marker plates/tags and anodized aluminum
locks can be custom marked for identification of equipment,
cables, hoses, pipes, conduit, etc. in petrochemical plants, power
plants, pulp and paper mills, breweries, and many other
MS
Strapping
applications. PANDUIT ® in-house computer controlled custom
marking systems provide sharp, crisp, high quality legends. Sequential
numbering for serialization is available.
* Anodized aluminum locks can only be marked by the laser system.
Marking
and
ID
Accessories
Technical
Info
LASER MARKING SYSTEM
• Used on all stainless steel cable ties, strapping, metal
marker plates/tags and anodized aluminum locks
• BOLD block letters
• Upper and lower case character capability
• Alphanumeric and sequential numbering ability
EMBOSSING SYSTEM
• Used on metal marker plates and tags which are
a maximum of .020 in. (0.5 mm) thick
• Excellent for applications that are exposed to
occasional painting and excessive dirt
• Upper case “raised ” character capability only
• Alphanumeric and sequential numbering ability
Character Sizes** Available:
1/8 in. (3.18mm) 1/4 in. (6.35mm)
5/16 in. (7.94 mm) 1/2 in. (12.7 mm)
Character Sizes** Available:
1/8 in (3.18 mm)
3/16 in. (4.77 mm)
3/16 in. (4.77mm)
Index
**Contact customer service for other available character sizes.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
D3
Markets
Metal Marking Devices
Metal Embossing Tape System
• Embosses 3/16" (5mm) characters onto rolls
of stainless steel or aluminum tape
• Can be used with PAN-STEEL ® Stainless Steel
Ties as a flag or a marker
MLT Ties
Part Number
Used with PAN-STEEL ® ties and accessories
• Excellent for on-site applications requiring
quick, easy and permanent identification
Std.
Pkg.
Qty.
Part Description
Tool Kit
MEHT
Includes tool, carrying case, (1) roll each META (aluminum) and METS4
(stainless) tape.
1
Characters Include:
MS
Strapping
ABCDEFGHIJKLMNOPQR
ST UVW XY Z 2 3 4 5 6 7 8 9 ./
Used with PAN-STEEL ® ties and accessories
Tape
Marking
and
ID
Tool punches a single 3/16" (5mm)
diameter hole (For Std. Cross section
tie) or a series of holes for wider
cross-section sizes.
META-X
.50" X 16' (12.7mm X 4.9m) aluminum tape*.
10**
METS3-X
.50" X 21' (12.7mm X 6.4m) 316 grade stainless steel tape.
10**
METS4-X
.50" X 21' (12.7mm X 6.4m) 304 grade stainless steel tape.
10**
* Galvanic reaction may occur between stainless steel ties and aluminum tape in certain environments causing the
aluminum to corrode.
**Order number of rolls required in multiples of Standard Package Quantity.
Indenter Press
Accessories
Easy-to-operate manual indenter press. Interchangeable indenter wheels in three character sizes
are available.
• For identification in various environments
• Provides quick easy and permanent
identification of PANDUIT ® PAN-STEEL ®
Stainless Steel Cable Ties, Straps, Marker
Plates, and Tags
• Interchangeable wheels
Technical
Info
Part Number
• Press includes fixture to hold MMP350 series
marker plates, MLT series cable ties, and MS
strapping in place to provide
high quality marking
• Tool is designed for long life and durability
• Automatic table indexing
• Depth adjustment screw
Std.
Pkg.
Qty.
Part Description
Press
IMP094
IMP125
IMP187
Indenter press with 3/32" (2.38mm) character wheel.
Indenter press with 1/8" (3.18mm) character wheel.
Indenter press with 3/16" (4.77mm) character wheel.
1
1
1
Interchangeable Wheel Kits
Index
D4
MWK094
MWK125
MWK187
IMP-FIX
3/32" (2.38mm) character wheel kit (wheel and indexing gear).
1/8" (3.18mm) character wheel kit (wheel and indexing gear).
3/16" (4.77mm) character wheel kit (wheel and indexing gear).
Interchangeable fixture for MMP172, MMP338, MT Series, and the aluminum
marker plates.
Order number of pieces required, in multiples of Standard Package Quantity.
1
1
1
1
Prime items appear in BOLD.
Markets
Marker Stamp Kit
• Provides quick, easy and permanent identification of PANDUIT ® PAN-STEEL ® Stainless Steel Cable
Ties, Straps, Marker Plates and Tags
Std.
Pkg.
Qty.
Part Number Part Description
STK12
Marker stamp kit contains (100) character stamps, (1) holder and (1) carrying
case. High quality 1/8" (3.18mm) nom. size steel character. Type holder keeps
type aligned and provides uniform depth of impression. The holder takes up
to 9 characters - 1 1/8" (28.6mm) long.
MLT Ties
1
The impression is made by hitting the
holder with a hammer.
Characters include:
AAABBCCDDEEEEFFGGHHIIIJJKKLLLMMNNNOOO
P P Q R R R S S STT U U UVWW X XY Z & / / - - .., , 1 1 1 1 2 2 2 2 3 3 3
444455566677788899000
MS
Strapping
KP-515 Design Kit
• Perfect for proto-typing
• Convenient and handy plastic kit box; once
closed parts stay in their compartments
• Durable and lightweight
Part Number Part Description
KP-515
Contains:
(100) MLT2S ties
(100) MLT2H ties
(50) MMP350H marker plates
(10) PCSS-5 in. (12.7 cm) length cushion sleeve
(10) PCSH-5 in. (12.7 cm) length cushion sleeve
(1) HTMT installation tool
(1) K-505 plastic kit box
Std.
Pkg.
Qty.
Marking
and
ID
1
Accessories
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
D5
Markets
PAN-STEEL ® System Accessories
PAN-STEEL ® System Accessories are used with PAN-STEEL ® Stainless Steel Cable Ties to speed
and simplify the mounting of wires, cables and tubing. Installation methods include screw
mounts and push mounts.
MLT Ties
• High strength
• Long life
• Weather resistant
• Chemical resistant
MS
Strapping
• Temperature extremes
• Radiation resistant
• Easy to use
Marking
and
ID
PANDUIT ® offers unique products to meet customer needs:
Screw mounts — One hole mounting
Push mount — No tapping required
Accessories
Bulk head mount — Zero profile mounting
Stackable spacers — For aerial lashing applications
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
E1
Markets
MTM1H Stainless Steel Tie Mount
• Low profile
• One hole mounting
• For use with standard, light-heavy and heavy
cross section PAN-STEEL ® ties as well as .375"
(9.5mm) wide strapping
• 304 Stainless Steel
A
W
MLT Ties
H
Z
Length
A
In.
mm
Width
W
In.
mm
Height
H
In.
mm
#8 (4.0mm)
screw
.90
22.6
.40
10.2
.17
4.4
.17
4.4
100
1000
MLTS/LH/H, MS375 or
MSC375
#10 (5.0mm)
screw
.90
22.6
.40
10.2
.17
4.4
.21
5.4
100
1000
MLTS/LH/H, MS375 or
MSC375
1/4" (6 mm)
screw
.90
22.6
.40
10.2
.17
4.4
.28
7.1
100
1000
Used with
PAN-STEEL ®
Ties/Strapping
MLTS/LH/H, MS375 or
MSC375
MTM1H10-C
MTM1H25-C
Part Number
MTM1H-C
MS
Strapping
Mounting
Method*
Hole Diameter Std. Std.
Z
Pkg. Ctn.
In.
mm
Qty. Qty.
*Stainless steel screws are recommended for fastening to avoid corrosion problems associated with dissimilar metals.
Stainless Steel Push Mount
• No tapping required
• Used where only one side of the panel
is accessible
• Nothing to assemble
• For use with standard, light-heavy and heavy
cross section PAN-STEEL ® ties
• 304 Stainless Steel
Marking
and
ID
W
H
P
A
Part Number
Accessories
MPWM-H56-Q
Used with
PAN-STEEL ®
Mounting
Method
Ties/Strapping
MLTS/LH/H
Inserted into pre-drilled
hole 5/16 in. (8 mm).
Length
A
In.
mm
Width
W
In.
mm
Height
H
In.
mm
.98
.29
.56
24.7
7.3
Panel Thickness
P
In.
mm
14.2 .031 – .094
0.8 – 2.4
Std. Std.
Pkg. Ctn.
Qty. Qty.
25
250
Stainless Steel Push Button Mount
Technical
Info
• Low profile
• No tapping required
• Designed for use only where both sides of
the panel are accessible
• For use with standard cross section
PAN-STEEL ® ties
• 304 Stainless Steel
H
A
W
Part Number
MBM-H25-Q
Index
E2
Used with
PAN-STEEL ®
Mounting
Ties/Strapping
Method
MLT-S
Inserted into pre-drilled
hole .25 in. (6.4mm).
Diameter
D
Width
W
Height
H
In.
mm
In.
mm
In.
mm
.40
10.0
.20
5.0
.26
6.5
Order number of pieces required, in multiples of Standard Package Quantity.
Panel
Thickness
In.
mm
.03 – .13 .8 – 4.0
Std. Std.
Pkg. Ctn.
Qty. Qty.
25
250
Prime items appear in BOLD.
Markets
Stainless Steel 2-Way Mount
A
Q
A
G
Z
Part Number
MTM2H-Q
Used with
PAN-STEEL ®
Ties/Strapping
MLTS/LH/H
Mounting
Method*
#8 (4 mm)
screw
H
Length
A
In.
mm
Height
H
In.
mm
.71
.30
18.0
• Two-way mount allows stainless steel cable ties to be
inserted from either of two sides
• Low profile
• Single hole center mounting for maximum holding
and stability
• Maximum screw head height .09 (2.3mm)
• For use with standard, light-heavy and heavy cross
section PAN-STEEL ® ties
• 304 Stainless Steel
Screw Head
Height
G
In.
mm
8.0
.09
2.3
Slot
Width
Q
In.
mm
Hole
Diameter
Z
In.
mm
.35
.17
9.0
4.5
MLT Ties
Std. Std.
Pkg. Ctn.
Qty. Qty.
25
250
MS
Strapping
*Stainless steel screws are recommended for fastening to avoid corrosion problems associated with dissimilar metals.
Stainless Steel Bulkhead Mount
•
•
•
•
•
Zero profile
Mounts directly to surface
Used where only one side of the panel is accessible
Permanent, secure application
Used with standard, light-heavy and heavy cross section
PAN-STEEL ® ties
• 304 Stainless Steel
H
W
A
Part Number
MTMBH-Q
Length
Used with
A
PAN-STEEL ®
Mounting
Ties/Strapping
Method
In.
mm
MLTS/LH/H
Pre-drill hole size 1.92 48.5
Standard and
Light Heavy cross
section MLT-S/LH
.375 (9.5) – .500
(12.7) Heavy
cross section
MLT-H .500 (12.7)
– .625 (15.9)
Width
W
In.
mm
Height
H
In.
mm
Max. Panel
Thickness
In.
mm
.21
.54
.50
5.3
13.7
12.7
Marking
and
ID
Std. Std.
Pkg. Ctn.
Qty. Qty.
25
250
Accessories
To Install Bulkhead Mount:
Technical
Info
1. Insert cable tie through mount slot
and fold cable tie.
2. Insert cable tie and mount
through panel/framework hole.
3. Pull cable tie back to secure the
mount in the panel/framework.
Index
4. Mount shown in correct position
for installation.
5. Separate cable tie to allow for
bundling of cables/wires, etc.
6. Install cable tie around bundle
and fasten.
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
E3
Markets
Stackable Aerial Cable Spacer
• Just one part to inventory
• Only one part, on-site sorting is eliminated
• Spacer snaps by hand into another to
increase spacer height by .50 in.
(12.7mm) increments
• Used with cable ties up to .75 in. (19mm)
wide in parallel or perpendicular applications
MLT Ties
MS
Strapping
PANDUIT ® cable ties and spacers are used to separate the support strand from the cable or to
separate two cables in aerial lashing applications.
Stackable Spacers (SACS50-T100) and
Stainless Steel Ties (MLT4H-LP).
Marking
and
ID
Part Number
SACS50-T100
Used
with
Cable Ties
A
Dimensions
B
C
mm In. mm In. mm
In.
▲See Footnote 2.08 52.8 1.16 29.5 .50 12.7
Material
Weather
Resistant
Polypropylene
Color Environment
Mounting
Method
Std. Std.
Pkg. Ctn.
Qty. Qty.
Black
Cable Ties
200 2000
Outdoors
▲ Stackable spacers may be installed using stainless steel cable ties or weather resistant cable ties (see Cable Ties & Wiring
Accessories Catalog SA-CTCB03).
Accessories
A
.79
(20.1)
B
.40
(10.2)
.77
(19.6)
B
Technical
Info
.71
(18.0)
C
C
.51
(13.0)
A
.45
(11.4)
Index
E4
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Markets
Stainless Steel Tie Technical Information
Physical Characteristics of Stainless Steel Cable Ties (MLT Series)
PAN-STEEL ®
Stainless Steel
PAN-STEEL ®
Stainless Steel
Tensile Strength 73° F (23° C)
Max. Continuous Use
Temperature
1000° F (538° C) for 304 &
316 material
Color
Flammability
90,000*
PSI
Stainless
Non-flammable
Min. Continuous Use
Temperature
–112° F (–80° C) for 304 &
316
Radiation Resistance
2 X 10 8 Rads
Ultraviolet Light Resistance
Excellent
Water Absorption
None
MLT Ties
* ASTME8 Test Method
PANDUIT ® Stainless Steel Cable Tie and Strapping Approvals
AGENCY
SPEC /
APPROVAL
APPLICABLE
REQUIREMENT PRODUCTS
SPEC /
APPROVAL
APPLICABLE
REQUIREMENT PRODUCTS
SAE Int’l
formerly
US MIL
AS23190
formerly
MS23109E
Dimensional,
MLT-S &
visual, vibration, MLT-H Series
temp. cycling,
and heavy
immersion, melting cable ties
point
in both
304 & 316
material
Underwriters
Laboratories
E56854
Dimensional,
MLT-S, MLT-H,
tensile, temp.,
MLT-WS, &
cycling, humidity
MLTWH
in 304, 316,
and
321 material
Det Norske
Veritas
Cert.
#E-6540
#E-6539
Salt mist test,
MLT-S, MLT-H
tensile test,
& MS ties and
accelerated aging,
straps in
vibration tests
316 material
Germanischer
Lloyd
Cert.
#3266683HH5179689HH
Mechanical
All MLT Ties
and
MS Straps
Amer. Bureau
of Shipping
Cert.
#99-CH18282-X
Mechanical
MLT-S, MLT-H,
MLT-H in both
304 & 316
material
and MLTC in
316 material
US Coast
Guard
File No.16703/46
Mechanical
MLT-H
Series
Cable Ties
Lloyd’s
Register of
Shipping
Cert.
#89/60123(E2)
Material
specification,
tensile test,
vibration tests
All MLT & MS
ties and straps
in both 304
and 316
material
US Military
MIL-T-81306A
MS90387-3
Mechanical
GS4MT
Installation
tools
Bureau
Veritas
Cert.
#04048/CIB
Cert.
#ELE71502CS
Mechanical
Material
MLT-S, MLT-H
specification,
in 316
dimensional, visual
material
AGENCY
RINA
MS
Strapping
Marking
and
ID
Accessories
All MLT ties
Approvals
Technical
Info
Military Specification
MIL-S-23190E
E56854
Cert. 99CH18282-X
United States
Coast Guard
Index
Bureau
Veritas
Det Norske
Veritas
Lloyd’s Register
of Shipping
Germanischer
Lloyd
RINA
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
F1
Markets
Chemical Resistance at 70° F (21° C) Temperature
%
304 & 316
Stainless
Steel*
Arsenic Acid
%
304 & 316
Stainless
Steel*
%
304 & 316
Stainless
Steel*
40
E
Cider
E
Methyl Alcohol
100
E
Sodium Bisulfate
10
Acetone
100
E
Diochloroethane
E
100
E
Methyl Chloride
100
E
Sodium Borate
All
Aluminum Hydroxide AQ
C.S.
Ammonium
5
Carbonate
Ammonium
10
Hydroxide
Ammonuim Nitrate
E
E
Diethyl Ether
100
E
Methyl Ethyl Ketone
100
E
Sodium Carbonate
5
E
E
Ethyl Alcohol
100
E
Naphtha
100
E
Sodium Chlorate
25
E
E
Ethyl Chloride
100
E
Nitric Acid
E
Sodium Chloride
2
E
E
Ethyl Glycol
100
E
Nitrous Acid
3070
5
Ammonium Sulfate
10
E
Sodium Fluoride
5
F
S
Ferric Hydroxide
All
E
Oleic Acid
100
E
Sodium Hydroxide
10
E
Barium Carbonate
All
E
Ferric Nitrate
10
E
Oxalic Acid
10
E
Sodium Hyposulfite
E
5
E
Ferrous Sulfate
10
E
Paraffin
100
E
Sodium Nitrate
AQ
C.S.
5
Barium Chloride
Barium Sulfate
10
E
Fuel Oil
100
E
Petroleum Ether
100
E
Sodium Nitrite
Barium Sulfide
Benzene
10
E
Furfural
100
E
Phenol
90
E
100
E
Gallic Acid
E
Phosphoric Acid
10
E
100
E
Gasoline
AQ
C.S.
100
Benzoic Acid
Butyric Acid
E
Picric Acid
1
50
E
Glycerine
100
E
Potassium Bromide
AQ
C.S.
AQ
C.S.
10
E
Hydrocyanic Acid
All
E
E
Hydrogen Peroxide
30
E
Potassium
Carbonate 1%
Potassium Chlorate
Calcium Hydroxide
20
E
Hydrogen Sulfide
Dry
E
Calcium
Hydrochlorite
Calcium Sulfate
2
F
Idoform
100
E
2
E
Chemical
MLT Ties
MS
Strapping
Calcium Carbonate
Marking
and
ID
Calcium Chlorate
Carbon Tetrachloride
Accessories
Chemical
%
304 & 316
Stainless
Steel*
Chemical
AQ
C.S.
40
Chemical
E
Sodium Percholate
AQ
C.S.
10
E
E
Sodium Phosphate
5
E
S
Sodium Sulfate
5
E
S
Sodium Thiosulfate
5
S
E
Stearic Acid
100
E
E
Sulfur
100
E
E
Sulfur Dioxide
All
E
E
Sulfuric Acid
100
E
Isopropyl Alcohol
100
E
Potassium
Dichromate
Potassium
25
Ferrocyanide
Potassium hydroxide 5
E
Sulfuric Acid
5
F
Jet Fuel
100
E
Potassium Iodide
All
E
Tannic Acid
10
E
Chlorine (Wet)
F
Lactic Acid
100
E
Potassium Nitrate
50
E
Tartaric Acid
50
E
Chlorine (Dry)
F
Lanolin
10
E
5
E
Tetrahydrofuran
100
E
Chloroacetic Acid
30
F
Lead Acetate
5
E
Potassium
Permanganate
Potassium Sulfate
Chloroform
100
E
E
Potassium Sulfide
Chromic Acid
5
E
Magnesium
All
Carbonate
Magnesium Chloride 10
F
Propyl Alcohol
Citric Acid
50
E
Magnesium Nitrate
All
E
Copper Cyanide
10
E
Malic Acid
Copper Nitrate
50
E
Mercury
AQ
C.S.
100
5
E
Toluene
100
F
AQ
C.S.
100
E
Xylene
100
E
E
Zinc Chloride
70
E
Silver Nitrate
10
E
Zinc Nitrate
E
E
Sodium Acetate
60
E
Zinc Sulfate
AQ
C.S.
AQ
C.S.
E
Sodium Bicarbonate
All
E
E
* E = Excellent S = Satisfactory F = Fair AQ C.S. = Aqueous Cold Saturated All = All % Concentrations
Technical
Info
Rigorous Tests and Physical Properties of Stainless Steel Ties
STRENGTH: PANDUIT ® PAN-STEEL ® Stainless Steel Ties are tested per the U.S. Military Specification MIL-S-23190,
minimum loop tensile test. This test consists of applying a tie to a split mandrel and then measuring the force required
to separate the (2) halves until the tie fails. These minimum loop tensile strengths are given for the various products
on pages B4 through B6.
TEMPERATURE EXTREMES: PANDUIT ® PAN-STEEL ® Stainless Steel Ties are 100% stainless steel in the alloy
provided (locking head, locking ball and body all provided from the same grade of material ordered).
Various temperature tests have been successfully completed. One such test is the U.S. Military Temperature Cycling
Test per Thermal Shock Method 107, Test Condition B of MIL-STD-202F. This test exposes the parts from low
temperature -85° F (-65°C) to high temperature 275° F (135°C) to low temperature -85° F (-65°C). After exposure,
the parts must be free of cracks, distortions, breaks, release of locking device, and meet the minimum loop tensile
requirements.
Index
VIBRATION: PANDUIT ® PAN-STEEL ® standard cross section ties have passed the U.S. Military random vibration Test Method 214. Test
Condition II, Letter J of MIL-STD-202. This test consists of applying parts to a bundle and then vibrating them with random vibration for 8
hours in each of two mutually perpendicular directions. The parts are then subjected to further temperature testing and finally have to pass
the minimum loop tensile strength test.
F2
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Markets
Rigorous Tests and Physical Properties of Stainless Steel Ties (continued)
SALT SPRAY: PANDUIT ® PAN-STEEL ® Stainless Steel Ties have been subjected to salt spray tests without signs of corrosion or reduction
in performance.
OUTDOOR EXPOSURE: PANDUIT ® PAN-STEEL ® Stainless Steel Ties have been exposed outdoors at New Lenox, Illinois USA since
1985. At the printing of this catalog, there has been no sign of corrosion or loss of performance.
FLUID IMMERSION: PANDUIT ® PAN-STEEL ® Stainless Steel Ties were immersed in: 1-Hydraulic Fluid, 2-Turbine Fuel, 3-Lubricating Oil,
and 4-Isopropyl Alcohol for (4) hours at temperatures of 122° F (50° C). Per SAE Standard AS23190/3, the parts were then subjected to and
passed the minimum loop tensile test.
MLT Ties
RADIATION: Installed cable ties of various materials have been exposed to different amounts of radiation to determine the maximum
acceptable limit. These tests were conducted by PANDUIT ® to determine the acceptability for use in various areas of nuclear power plants
(accumulated over 40 year life). Radiation resistance is 2x10 8 rads.
Military Cross Reference (AS23190)
PANDUIT ®
Part
Number
Current Military
Standard
Part Number
Gage Conversion Chart
Gage
Inches
mm
.135
.120
.105
3.571
3.175
2.778
MLT2S-CP
AS23190/3-1
10
11
12
MLT2S-CP316
AS23190/3-1
13
.090
2.381
MLT4S-CP
AS23190/3-2
14
.075
1.984
MLT4S-CP316
AS23190/3-2
15
.067
1.778
MLT6S-CP
AS23190/3-3
16
.060
1.587
MLT6S-CP316
AS23190/3-3
17
.054
1.422
MLT8S-CP
AS23190/3-4
18
.048
1.270
MLT8S-CP316
AS23190/3-4
19
.042
1.118
MLT2H-LP
AS23190/3-5
20
.036
0.965
MLT2H-LP316
AS23190/3-5
21
.033
0.865
MLT4H-LP
AS23190/3-6
22
.030
0.793
MLT4H-LP316
AS23190/3-6
23
.027
0.711
MLT6H-LP
AS23190/3-7
24
.024
0.635
MLT6H-LP316
AS23190/3-7
25
.021
0.559
MLT8H-LP
AS23190/3-8
26
.018
0.483
MLT8H-LP316
AS23190/3-8
27
.016
0.432
MLT10H-LP
AS23190/3-9
28
.015
0.396
MLT10H-LP316
AS23190/3-9
29
.014
0.356
30
.012
0.330
31
.011
0.279
32
.010
0.254
33
.009
0.229
34
.008
0.216
MS
Strapping
Marking
and
ID
Accessories
Technical
Info
Index
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
F3
Markets
Page
Number
Part Number
A
AP350HW86-C . . . . . . . . . . . . . . . . . . . . . . .D2
B
BT1HT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C6
BT2MS75 . . . . . . . . . . . . . . . . . . . . . . . . . . .C7
BT2N75 . . . . . . . . . . . . . . . . . . . . . . . . . . . .C7
C
CAMT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B13
G
GS4MT . . . . . . . . . . . . . . . . . . . . . . . . . . . .B13
H
HTMT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B14
I
IMP-FIX
IMP094 .
IMP125 .
IMP187 .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.D4
.D4
.D4
.D4
K
K4M-BLD . . . . . . . . . . . . . . . . . . . . . . . . . .B13
K4MTG . . . . . . . . . . . . . . . . . . . . . . . . . . . .B13
KP-515 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D5
KPPTMTB . . . . . . . . . . . . . . . . . . . . . . . . . .B12
KPPTMTG . . . . . . . . . . . . . . . . . . . . . . . . .B12
KT2MG . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C7
KT3MG . . . . . . . . . . . . . . . . . . . . . . . . . . . .B14
M
MBCEH-QR316 . . . . . . . . . . . . . . . . . . . . . .B7
MBCH-QR316 . . . . . . . . . . . . . . . . . . . . . . . .B7
MBCSH-QR316 . . . . . . . . . . . . . . . . . . . . . .B7
MBEH-TLR . . . . . . . . . . . . . . . . . . . . . . . . . .B7
MBEH-TLR316 . . . . . . . . . . . . . . . . . . . . . . .B7
MBH-MR . . . . . . . . . . . . . . . . . . . . . . . . . . . .B7
MBH-MR316 . . . . . . . . . . . . . . . . . . . . . . . . .B7
MBH-TLR . . . . . . . . . . . . . . . . . . . . . . . . . . .B7
MBH-TLR316 . . . . . . . . . . . . . . . . . . . . . . . .B7
MBM-H25-Q . . . . . . . . . . . . . . . . . . . . . . . . .E2
MBS-MR . . . . . . . . . . . . . . . . . . . . . . . . . . . .B7
MBS-MR316 . . . . . . . . . . . . . . . . . . . . . . . . .B7
MBS-TLR . . . . . . . . . . . . . . . . . . . . . . . . . . .B7
MBS-TLR316 . . . . . . . . . . . . . . . . . . . . . . . .B7
MBSH-TR . . . . . . . . . . . . . . . . . . . . . . . . . . .B7
MBSH-TR316 . . . . . . . . . . . . . . . . . . . . . . . .B7
MEHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D4
META-X . . . . . . . . . . . . . . . . . . . . . . . . . . . .D4
METS3-X . . . . . . . . . . . . . . . . . . . . . . . . . . .D4
METS4-X . . . . . . . . . . . . . . . . . . . . . . . . . . .D4
MLT10EH-LP . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT10EH15-LP . . . . . . . . . . . . . . . . . . . . . .B4
MLT10H-LP . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT10H-LP316 . . . . . . . . . . . . . . . . . . . . . . .B5
MLT10S-CP . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT10S-CP316 . . . . . . . . . . . . . . . . . . . . . .B5
Part Number
Page
Number
MLT10SH-LP . . . . . . . . . . . . . . . . . . . . . . . .B5
MLT10WH-LP . . . . . . . . . . . . . . . . . . . . . . . .B6
MLT12EH-Q . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT12EH15-Q . . . . . . . . . . . . . . . . . . . . . . .B4
MLT12H-Q . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT12S-Q . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT12SH-Q . . . . . . . . . . . . . . . . . . . . . . . . .B5
MLT14H-Q . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT14S-Q . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT15S-Q . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT1S-CP . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT1S-CP316 . . . . . . . . . . . . . . . . . . . . . . .B5
MLT2.7H-LP . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT2.7S-CP . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT2.7WH-LP . . . . . . . . . . . . . . . . . . . . . . .B6
MLT2.7WH-LP316 . . . . . . . . . . . . . . . . . . . . .B6
MLT2.7WLH-LP . . . . . . . . . . . . . . . . . . . . . .B6
MLT2.7WLH-LP316 . . . . . . . . . . . . . . . . . . . .B6
MLT2.7WS-LP . . . . . . . . . . . . . . . . . . . . . . . .B6
MLT2.7WS-LP316 . . . . . . . . . . . . . . . . . . . . .B6
MLT2DH-L . . . . . . . . . . . . . . . . . . . . . . . . .B11
MLT2EH-LP . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT2EH-LP316 . . . . . . . . . . . . . . . . . . . . . .B5
MLT2H-LP . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT2H-LP316 . . . . . . . . . . . . . . . . . . . . . . . .B5
MLT2LH-LP . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT2LH-LP316 . . . . . . . . . . . . . . . . . . . . . . .B5
MLT2S-CP . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT2S-CP316 . . . . . . . . . . . . . . . . . . . . . . .B5
MLT2S-L . . . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT4DEH-Q . . . . . . . . . . . . . . . . . . . . . . . .B11
MLT4DEH-Q316 . . . . . . . . . . . . . . . . . . . . .B11
MLT4DEH15-Q . . . . . . . . . . . . . . . . . . . . . .B11
MLT4DEH15-Q316 . . . . . . . . . . . . . . . . . . .B11
MLT4DH-L . . . . . . . . . . . . . . . . . . . . . . . . .B11
MLT4DSH-Q . . . . . . . . . . . . . . . . . . . . . . . .B11
MLT4DSH-Q316 . . . . . . . . . . . . . . . . . . . . .B11
MLT4EH-LP . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT4EH-LP316 . . . . . . . . . . . . . . . . . . . . . .B5
MLT4EH15-LP . . . . . . . . . . . . . . . . . . . . . . .B4
MLT4EH15-LP316 . . . . . . . . . . . . . . . . . . . . .B5
MLT4H-LP . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT4H-LP316 . . . . . . . . . . . . . . . . . . . . . . . .B5
MLT4LH-LP . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT4LH-LP316 . . . . . . . . . . . . . . . . . . . . . . .B5
MLT4S-CP . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT4S-CP316 . . . . . . . . . . . . . . . . . . . . . . .B5
MLT4S-L . . . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT4SH-LP . . . . . . . . . . . . . . . . . . . . . . . . .B5
MLT4SH-LP316 . . . . . . . . . . . . . . . . . . . . . .B5
MLT4WH-LP . . . . . . . . . . . . . . . . . . . . . . . . .B6
MLT4WH-LP316 . . . . . . . . . . . . . . . . . . . . . .B6
MLT4WLH-LP . . . . . . . . . . . . . . . . . . . . . . . .B6
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
MLT Ties
MS
Strapping
Marking
and
ID
Accessories
Technical
Info
Index
G1
Markets
Part Number
MLT Ties
MS
Strapping
Marking
and
ID
Accessories
Technical
Info
Index
G2
Page
Number
MLT4WLH-LP316 . . . . . . . . . . . . . . . . . . . . .B6
MLT4WS-LP . . . . . . . . . . . . . . . . . . . . . . . . .B6
MLT4WS-LP316 . . . . . . . . . . . . . . . . . . . . . .B6
MLT5DH-L . . . . . . . . . . . . . . . . . . . . . . . . .B11
MLT6DEH-Q . . . . . . . . . . . . . . . . . . . . . . . .B11
MLT6DEH-Q316 . . . . . . . . . . . . . . . . . . . . .B11
MLT6DEH15-Q . . . . . . . . . . . . . . . . . . . . . .B11
MLT6DEH15-Q316 . . . . . . . . . . . . . . . . . . .B11
MLT6DSH-Q . . . . . . . . . . . . . . . . . . . . . . . .B11
MLT6DSH-Q316 . . . . . . . . . . . . . . . . . . . . .B11
MLT6EH-LP . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT6EH-LP316 . . . . . . . . . . . . . . . . . . . . . .B5
MLT6EH15-LP . . . . . . . . . . . . . . . . . . . . . . .B4
MLT6EH15-LP316 . . . . . . . . . . . . . . . . . . . . .B5
MLT6H-LP . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT6H-LP316 . . . . . . . . . . . . . . . . . . . . . . . .B5
MLT6LH-LP . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT6LH-LP316 . . . . . . . . . . . . . . . . . . . . . . .B5
MLT6S-CP . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT6S-CP316 . . . . . . . . . . . . . . . . . . . . . . .B5
MLT6SH-LP . . . . . . . . . . . . . . . . . . . . . . . . .B5
MLT6SH-LP316 . . . . . . . . . . . . . . . . . . . . . .B5
MLT6WH-LP . . . . . . . . . . . . . . . . . . . . . . . . .B6
MLT6WH-LP316 . . . . . . . . . . . . . . . . . . . . . .B6
MLT6WLH-LP . . . . . . . . . . . . . . . . . . . . . . . .B6
MLT6WLH-LP316 . . . . . . . . . . . . . . . . . . . . .B6
MLT6WS-LP . . . . . . . . . . . . . . . . . . . . . . . . .B6
MLT6WS-LP316 . . . . . . . . . . . . . . . . . . . . . .B6
MLT8DEH-Q . . . . . . . . . . . . . . . . . . . . . . . .B11
MLT8DEH-Q316 . . . . . . . . . . . . . . . . . . . . .B11
MLT8DEH15-Q . . . . . . . . . . . . . . . . . . . . . .B11
MLT8DEH15-Q316 . . . . . . . . . . . . . . . . . . .B11
MLT8DSH-Q . . . . . . . . . . . . . . . . . . . . . . . .B11
MLT8DSH-Q316 . . . . . . . . . . . . . . . . . . . . .B11
MLT8EH-LP . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT8EH-LP316 . . . . . . . . . . . . . . . . . . . . . .B5
MLT8EH15-LP . . . . . . . . . . . . . . . . . . . . . . .B4
MLT8EH15-LP316 . . . . . . . . . . . . . . . . . . . . .B5
MLT8H-LP . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT8H-LP316 . . . . . . . . . . . . . . . . . . . . . . . .B5
MLT8LH-LP . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT8LH-LP316 . . . . . . . . . . . . . . . . . . . . . . .B5
MLT8S-CP . . . . . . . . . . . . . . . . . . . . . . . . . .B4
MLT8S-CP316 . . . . . . . . . . . . . . . . . . . . . . .B5
MLT8SH-LP . . . . . . . . . . . . . . . . . . . . . . . . .B5
MLT8SH-LP316 . . . . . . . . . . . . . . . . . . . . . .B5
MLT8WH-LP . . . . . . . . . . . . . . . . . . . . . . . . .B6
MLT8WH-LP316 . . . . . . . . . . . . . . . . . . . . . .B6
MLT8WLH-LP . . . . . . . . . . . . . . . . . . . . . . . .B6
MLT8WLH-LP316 . . . . . . . . . . . . . . . . . . . . .B6
MLT8WS-LP . . . . . . . . . . . . . . . . . . . . . . . . .B6
MLT8WS-LP316 . . . . . . . . . . . . . . . . . . . . . .B6
MLTC10H-LP316 . . . . . . . . . . . . . . . . . . . . .B9
MLTC2H-LP316 . . . . . . . . . . . . . . . . . . . . . .B9
Order number of pieces required, in multiples of Standard Package Quantity.
Part Number
Page
Number
MLTC4H-LP316 . . . . . . . . . . . . . . . . . . . . . .B9
MLTC6H-LP316 . . . . . . . . . . . . . . . . . . . . . .B9
MLTC8H-LP316 . . . . . . . . . . . . . . . . . . . . . .B9
MLTFC2EH-LP316 . . . . . . . . . . . . . . . . . . . .B9
MLTFC2H-LP316 . . . . . . . . . . . . . . . . . . . . .B9
MLTFC2LH-LP316 . . . . . . . . . . . . . . . . . . . .B9
MLTFC2S-CP316 . . . . . . . . . . . . . . . . . . . . .B9
MLTFC4EH-LP316 . . . . . . . . . . . . . . . . . . . .B9
MLTFC4H-LP316 . . . . . . . . . . . . . . . . . . . . .B9
MLTFC4LH-LP316 . . . . . . . . . . . . . . . . . . . .B9
MLTFC4S-CP316 . . . . . . . . . . . . . . . . . . . . .B9
MLTFC6EH-LP316 . . . . . . . . . . . . . . . . . . . .B9
MLTFC6H-LP316 . . . . . . . . . . . . . . . . . . . . .B9
MLTFC6LH-LP316 . . . . . . . . . . . . . . . . . . . .B9
MLTFC6S-CP316 . . . . . . . . . . . . . . . . . . . . .B9
MLTFC8EH-LP316 . . . . . . . . . . . . . . . . . . . .B9
MLTFC8H-LP316 . . . . . . . . . . . . . . . . . . . . .B9
MLTFC8LH-LP316 . . . . . . . . . . . . . . . . . . . .B9
MLTFC8S-CP316 . . . . . . . . . . . . . . . . . . . . .B9
MMP172-C . . . . . . . . . . . . . . . . . . . . . . . . . .D2
MMP172-C316 . . . . . . . . . . . . . . . . . . . . . . .D2
MMP172W38-C . . . . . . . . . . . . . . . . . . . . . .D2
MMP172W38-C316 . . . . . . . . . . . . . . . . . . .D2
MMP338W21-Q . . . . . . . . . . . . . . . . . . . . . .D2
MMP350-C . . . . . . . . . . . . . . . . . . . . . . . . . .D2
MMP350-C316 . . . . . . . . . . . . . . . . . . . . . . .D2
MMP350H-C . . . . . . . . . . . . . . . . . . . . . . . . .D2
MMP350H-C316 . . . . . . . . . . . . . . . . . . . . . .D2
MMP350W17-Q . . . . . . . . . . . . . . . . . . . . . .D2
MMP350W38-C . . . . . . . . . . . . . . . . . . . . . .D2
MMP350W38-C316 . . . . . . . . . . . . . . . . . . .D2
MMPB338W21-Q . . . . . . . . . . . . . . . . . . . . .D2
MPWM-H56-Q . . . . . . . . . . . . . . . . . . . . . . .E2
MS10W38T15-L4 . . . . . . . . . . . . . . . . . . . . .C4
MS10W38T15-L6 . . . . . . . . . . . . . . . . . . . . .C4
MS10W50T15-L4 . . . . . . . . . . . . . . . . . . . . .C4
MS10W50T15-L6 . . . . . . . . . . . . . . . . . . . . .C4
MS10W63T15-L4 . . . . . . . . . . . . . . . . . . . . .C4
MS10W63T15-L6 . . . . . . . . . . . . . . . . . . . . .C4
MS2W38T15-L4 . . . . . . . . . . . . . . . . . . . . . .C4
MS2W38T15-L6 . . . . . . . . . . . . . . . . . . . . . .C4
MS4W38T15-L4 . . . . . . . . . . . . . . . . . . . . . .C4
MS4W38T15-L6 . . . . . . . . . . . . . . . . . . . . . .C4
MS4W50T15-L4 . . . . . . . . . . . . . . . . . . . . . .C4
MS4W50T15-L6 . . . . . . . . . . . . . . . . . . . . . .C4
MS4W63T15-L4 . . . . . . . . . . . . . . . . . . . . . .C4
MS4W63T15-L6 . . . . . . . . . . . . . . . . . . . . . .C4
MS6W38T15-L4 . . . . . . . . . . . . . . . . . . . . . .C4
MS6W38T15-L6 . . . . . . . . . . . . . . . . . . . . . .C4
MS6W50T15-L4 . . . . . . . . . . . . . . . . . . . . . .C4
MS6W50T15-L6 . . . . . . . . . . . . . . . . . . . . . .C4
MS6W63T15-L4 . . . . . . . . . . . . . . . . . . . . . .C4
MS6W63T15-L6 . . . . . . . . . . . . . . . . . . . . . .C4
MS8W38T15-L4 . . . . . . . . . . . . . . . . . . . . . .C4
Prime items appear in BOLD.
Markets
Part Number
Page
Number
MS8W38T15-L6 . . . . . . . . . . . . . . . . . . . . . .C4
MS8W50T15-L4 . . . . . . . . . . . . . . . . . . . . . .C4
MS8W50T15-L6 . . . . . . . . . . . . . . . . . . . . . .C4
MS8W63T15-L4 . . . . . . . . . . . . . . . . . . . . . .C4
MS8W63T15-L6 . . . . . . . . . . . . . . . . . . . . . .C4
MSBW38-C4 . . . . . . . . . . . . . . . . . . . . . . . .C5
MSBW38-C6 . . . . . . . . . . . . . . . . . . . . . . . .C5
MSBW50-C4 . . . . . . . . . . . . . . . . . . . . . . . .C5
MSBW50-C6 . . . . . . . . . . . . . . . . . . . . . . . .C5
MSBW63-C4 . . . . . . . . . . . . . . . . . . . . . . . .C5
MSBW63-C6 . . . . . . . . . . . . . . . . . . . . . . . .C5
MSC10W38T15-L6 . . . . . . . . . . . . . . . . . . . .C6
MSC10W50T15-L6 . . . . . . . . . . . . . . . . . . . .C6
MSC10W63T15-L6 . . . . . . . . . . . . . . . . . . . .C6
MSC4W38T15-L6 . . . . . . . . . . . . . . . . . . . . .C6
MSC4W50T15-L6 . . . . . . . . . . . . . . . . . . . . .C6
MSC4W63T15-L6 . . . . . . . . . . . . . . . . . . . . .C6
MSC6W38T15-L6 . . . . . . . . . . . . . . . . . . . . .C6
MSC6W50T15-L6 . . . . . . . . . . . . . . . . . . . . .C6
MSC6W63T15-L6 . . . . . . . . . . . . . . . . . . . . .C6
MSC8W38T15-L6 . . . . . . . . . . . . . . . . . . . . .C6
MSC8W50T15-L6 . . . . . . . . . . . . . . . . . . . . .C6
MSC8W63T15-L6 . . . . . . . . . . . . . . . . . . . . .C6
MSCNW38T15-QR6 . . . . . . . . . . . . . . . . . . .C5
MSCNW50T15-QR6 . . . . . . . . . . . . . . . . . . .C5
MSCNW63T15-QR6 . . . . . . . . . . . . . . . . . . .C5
MSCW38T15-QR6 . . . . . . . . . . . . . . . . . . . .C5
MSCW50T15-QR6 . . . . . . . . . . . . . . . . . . . .C5
MSCW63T15-QR6 . . . . . . . . . . . . . . . . . . . .C5
MSW38T15-CR4 . . . . . . . . . . . . . . . . . . . . .C5
MSW38T15-CR6 . . . . . . . . . . . . . . . . . . . . .C5
MSW50T15-CR4 . . . . . . . . . . . . . . . . . . . . .C5
MSW50T15-CR6 . . . . . . . . . . . . . . . . . . . . .C5
MSW63T15-CR4 . . . . . . . . . . . . . . . . . . . . .C5
MSW63T15-CR6 . . . . . . . . . . . . . . . . . . . . .C5
MT150D-Q . . . . . . . . . . . . . . . . . . . . . . . . . .D2
MT172-C . . . . . . . . . . . . . . . . . . . . . . . . . . .D2
MT172-C316 . . . . . . . . . . . . . . . . . . . . . . . .D2
MT172W38-C . . . . . . . . . . . . . . . . . . . . . . . .D2
MT1D-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . .D2
MT213D-Q . . . . . . . . . . . . . . . . . . . . . . . . . .D2
MT338W21-Q . . . . . . . . . . . . . . . . . . . . . . . .D2
MT350-C . . . . . . . . . . . . . . . . . . . . . . . . . . .D2
MT350-C316 . . . . . . . . . . . . . . . . . . . . . . . .D2
MT350W17-Q . . . . . . . . . . . . . . . . . . . . . . . .D2
MT350W38-C316 . . . . . . . . . . . . . . . . . . . . .D2
MTB150D-Q . . . . . . . . . . . . . . . . . . . . . . . . .D2
MTB1D-Q . . . . . . . . . . . . . . . . . . . . . . . . . . .D2
MTB213D-Q . . . . . . . . . . . . . . . . . . . . . . . . .D2
MTB338W21-Q . . . . . . . . . . . . . . . . . . . . . . .D2
MTB350W17-Q . . . . . . . . . . . . . . . . . . . . . . .D2
MTHEH-C . . . . . . . . . . . . . . . . . . . . . . . . . . .B8
MTHEH-C316 . . . . . . . . . . . . . . . . . . . . . . . .B8
MTHH-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .B8
Page
Number
Part Number
MTHH-C316 . . . . . . . . . . . . . . . . . . . . . . . . .B8
MTHS-C . . . . . . . . . . . . . . . . . . . . . . . . . . . .B8
MTHS-C316 . . . . . . . . . . . . . . . . . . . . . . . . .B8
MTHSH-C . . . . . . . . . . . . . . . . . . . . . . . . . . .B8
MTHSH-C316 . . . . . . . . . . . . . . . . . . . . . . . .B8
MTM1H-C . . . . . . . . . . . . . . . . . . . . . . . . . . .E2
MTM1H10-C . . . . . . . . . . . . . . . . . . . . . . . . .E2
MTM1H25-C . . . . . . . . . . . . . . . . . . . . . . . . .E2
MTM2H-Q . . . . . . . . . . . . . . . . . . . . . . . . . . .E3
MTMBH-Q . . . . . . . . . . . . . . . . . . . . . . . . . .E3
MWK094 . . . . . . . . . . . . . . . . . . . . . . . . . . .D4
MWK125 . . . . . . . . . . . . . . . . . . . . . . . . . . .D4
MWK187 . . . . . . . . . . . . . . . . . . . . . . . . . . .D4
P
PCSH-CR
PCSS-CR
PL289N1
PPH10 . .
PPTMT . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.B10
.B10
.B12
.B12
.B12
MLT Ties
MS
Strapping
R
RT1HT . . . . . . . . . . . . . . . . . . . . . . . . . . . .B14
S
SACS50-T100 . . . . . . . . . . . . . . . . . . . . . . . .E4
ST3MT . . . . . . . . . . . . . . . . . . . . . . . . . . . .B14
STK12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D5
Marking
and
ID
T
TTLK3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B13
For service and technical support, call 800-777-3300 (outside the U.S. and Canada, see back cover).
Accessories
Technical
Info
Index
G3
PANDUIT ® is a global leader in wiring and communication products,
delivering end-to-end solutions in support of
demanding electrical and networking requirements.
PANDUIT ® Catalogs
Cable Ties
Power Connectors
SA-CTCB03
SA101N15C-NL
!PAN-TY ® Cable Ties
!CONTOUR-TY ™ Cable Ties
!Copper Compression Lugs
!Copper Mechanical Connectors
!PAN-TY Clamp Ties
!DURA-TY ™ Cable Ties
!Copper Compression Splices
!Split Bolt Connectors
!PAN-TY ® Push Mount Ties
!BELT-TY ™ In-Line Cable Ties
!High Voltage Lugs and Splices
!Aluminum Mechanical Connectors
!PAN-TY ® Marker Ties
!TAK-TY ® Hook & Loop Cable Ties
!Compression Taps
!DOME-TOP ® Barb Ty Cable Ties
!STA-STRAP ® Cable Ties
!Aluminum Compression Lugs
!Grounding Connectors
!DOME-TOP ® Barb Ty Clamp Ties
!Cable Tie Installation Tools
!Aluminum Compression Splices
!Crimping Tools and Dies
!DOME-TOP ® Barb Ty Marker Ties
!Custom Hot Stamping
!Compression Connector
®
- Dual Rated Connectors
Accessories
Wiring Accessories/Insulation
Wiring Duct
SA-CTCB03
SA-WDCB05
!Adhesive Backed Cable Tie
!Grommet Edging
!PANDUCT ® Slotted Wall
Mounts
!Screw Applied Cable Tie Mounts
!Flat Cable Mounts
!Fixed Diameter Clamps
!Harness Board Accessories
!Spiral Wrap
!Braided Expandable Sleeving
Wiring Duct
!PANDUCT ® Solid Wall Raceway
!PANDUCT ® Halogen Free Slotted
Wall Wiring Duct
!PANDUCT ® Flush Cover Round
Hole Wiring Duct
!Corrugated Loom Tubing and
Fittings
!Heat Shrink Tubing
!Non-Shrink PVC Tubing
!PAN-WRAP ™ Split Harness Wrap
!PANDUCT ® Hinged Slotted Wall
Wiring Duct
!PANDUCT ® Flexible Wiring Duct
!PANDUCT ® Low Smoke Slotted
Wall Wiring Duct
!Wiring Duct Accessories and
Installation Tools
Identification Products
Surface Raceway
SA-101N315C-ID
SA-SRCB02
!Hand-Held Printers
!Lockout/Tagout Products
!Office Furniture Raceway
!Tabletop Printers
!Voltage Markers
!Cove Raceway
!Faceplates, Surface Mount Outlet
!Labeling Software
!Warning Labels
!PAN-WAY ® TG-70 Surface Raceway
!Computer Printable Labels
!Safety Signs and Tags
!PAN-WAY ® T-70 & Twin-70
!Wire Markers
!Letters and Numbers
Boxes & Labeling Administration
!PAN-WAY ® LD Profile Surface
Raceway
!PAN-WAY ® T130 Surface Raceway
Surface Raceway
!PAN-WAY ® T-45 Surface Raceway
!PAN-POLE ™ Outlet Poles
!ULTIMATE ID ™ Network Labeling
System
Network Connectivity
SA-TM03CB02A
SA-NCCB04
!PAN-TERM ® Terminals
!Terminal Kits
!Modules
!Racks & Cable Management
!Ferrule End Sleeves
!Ferrule End Sleeve Kits
!ULTIMATE ID ™ System
!Grounding and Bonding
!PAN-TERM ® Disconnects
!REEL SMART ™ Terminal Products
!Work Area
!Fiber Routing
!PAN-TERM ® Splices
!Terminal Installation Tools
!Zone Cabling
!Surface Raceway
!Patch Panels, Copper Patch
!Labeling & Administration
Cords & Punchdowns
!Fiber Connectors, Enclosures &
Patch Cords
!Cable Ties & Accessories
!PAN-TERM ® Wire Joints
G4
Terminals
工商网监
湘ICP备2023018690号
