FIBER-DUCT ™ ROUTING SYSTEM
FIBER-DUCT ™ Routing System
NEC Compliant/UL Listed
The FIBER-DUCT Routing System
provides a complete solution for routing
and protecting your fiber optic cables. This
system can also be used for Category 5,
UTP, ScTP, and Coax cabling applications
as well. The fittings are designed to
maintain a minimum 2" cable bend radius
which protects against signal loss due to
excessive bending of cables. A full
selection of fittings is available to speed the
installation.
Additional features include:
UL Listed for general use
• UL94V-0 Flammability rating on
all PVC fittings and PVC duct
• Snap on non-slip covers
• Two sizes: 2" X 2" and 4" X 4"
• Minimum 2" bend radius fittings
• Available in Orange, Light Gray,
Black and Yellow (Duct—PVC;
Fittings—ABS material)
• Available in clear (Polycarbonate
material)
• Manufactured in an ISO 9001
registered facility
I
Excellent for use in:
•
•
•
•
•
Telecommunications Closets
Central Offices
Equipment rooms
Entrance facilities
Appropriate floor and ceiling
spaces
Panduit FIBER-DUCT ™ Routing System provides the following key benefits:
Compliant with NEC Articles 770 & 800
• Protects against signal loss due to excessive bending
• Easy and secure installation—completely enclosed to
protect cables
• Allows for distribution of large amounts of fiber cable
• Identifies Fiber Optic Cable
(Orange = Multi-mode; Yellow = Single-Mode)
• Provides a totally integrated cabling solution
• ISO 9001 assures highest quality and reliability
For Technical Assistance, call: 888-506-5400, Ext. 8287 (outside the U.S., see inside back cover for International Directory)
J1
FIBER-DUCT ™ ROUTING SYSTEM
Table of Contents
Page
FIBER-DUCT ™ Routing System
Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J3-J4
Mounting Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J4-J5
PANDUCT ® Types E and S
Fiber Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J3
Fill Capacity Information . . . . . . . . . . . . . . . . . . . . . . . . . . J6
FIBER-DUCT Routing System Applications
FIBER-DUCT Routing System can
be used with a cable management
system when routing fiber optic or
category 5 cables to
telecommunications racks or
enclosures.
Both duct and fittings are available in
clear for low smoke applications. The
clear polycarbonate material allows
cable color to show through for easy
identification.
Both duct and fittings are available
in orange (multi-mode) and yellow
(single-mode) to clearly identify fiber
optic cable.
All fittings in this system are
designed with a minimum 2" bend
r adius to protect fiber optic cables.
FIBER-DUCT System includes a
complete line of mounting hardware
for a variety of applications.
For Technical Assistance, call: 888-506-5400, Ext. 8287 (outside the U.S., see inside back cover for International Directory)
J2
FIBER-DUCT ™ ROUTING SYSTEM
PANDUCT ® Solid and Slotted Wall Wiring Duct
Nominal Duct Size
Duct
Part Number
Width
(in)
Height
(in)
Cover Part
Number
Color !
Material
Duct
Cover
Std. Std. Ctn. Std. Ctn.
Length
Qty.
Qty.
Types S and PS Solid Wall Wiring Duct
S2X2OR6NM
PS2X2CL6NM
C2OR6
2.00
2.00
(50.8mm) (50.8mm) PC2CL6
Orange
Clear
PVC
Polycarbonate
6 ft
6 ft
120 ft
120 ft
120 ft
120 ft
S4X4OR6NM
PS4X4CL6NM
C4OR6
4.00
4.00
(101.6mm) (101.6mm) PC4CL6
Orange
Clear
PVC
Polycarbonate
6 ft
6 ft
120 ft
120 ft
120 ft
120 ft
NOTE: Available w ith mounting holes. To order delete NM from the Part Number.
Types E and PE Slotted Wall Wiring Duct
E2X2OR6
PE2X2CL6
C2OR6
2.00
2.00
(50.8mm) (50.8mm) PC2CL6
Orange
Clear
PVC
Polycarbonate
6 ft
6 ft
120 ft
120 ft
120 ft
120 ft
E4X4OR6
PE4X4CL6
C4OR6
4.00
4.00
(101.6mm) (101.6mm) PC4CL6
Orange
Clear
PVC
Polycarbonate
6 ft
6 ft
120 ft
120 ft
120 ft
120 ft
NOTE: Available without mounting holes. To order add NM to the end of the Part Number.
! PVC material parts listed in Orange (OR) color. To order other colors in PVC material substitute Yellow (YL), BL (Black), and Light
Gray (LG). Contact Factory for details.
ORDERING INFORMATION:
Order number of feet required, in multiples of Standard Length Increment.
FIBER-DUCT ™ System Fittings
FCF2X2
FCF4X4
FEC2X2
FEC4X4
FFWC2X2
FFWC4X4
FIVRA2X2
FIVRA4X4
FOVRA2X2
FOVRA4X4
FIV452X2
FIV454X4
FOV452X2
FOV454X4
Par t Number
FCF2X2OR
PFCF2X2CL
FCF4X4OR
PFCF4X4CL
FEC2X2OR
PFEC2X2CL
FEC4X4OR
PFEC4X4CL
FFWC2X2OR
PFFWC2X2CL
FFWC4X4OR
PFFWC4X4CL
FIVRA2X2OR
PFIVRA2X2CL
FIVRA4X4OR
PFIVRA4X4CL
FOVRA2X2OR
PFOVRA2X2CL
FOVRA4X4OR
PFOVRA4X4CL
FIV452X2OR
PFIV452X2CL
FIV454X4OR
PFIV454X4CL
FOV452X2OR
PFOV452X2CL
FOV454X4OR
PFOV454X4CL
Description
Material
Color !
Std.
Pkg.
Qty.
Coupler Fitting — 2 x 2 Size
Used to join two sections of duct together
Coupler Fitting – 4 x 4 Size
Used to join two sections of duct together
End Cap Fitting — 2 x 2 Size
Closes the end of the duct
End Cap Fitting — 4 x 4 Size
Closes the end of the duct
Four Way Cross Fitting — 2 x 2 Size
Used to join duct at four way cross intersections
Four Way Cross Fitting — 4 x 4 Size
Used to join duct at four way cross intersections
Inside Vertical Right Angle Fitting — 2 x 2 Size
Used to join duct at 90° inside corners
Inside Vertical Right Angle Fitting — 4 x 4 Size
Used to join duct at 90° inside corners
Outside Vertical Right Angle Fitting — 2 x 2 Size
Used to join duct at 90° outside corners
Outside Vertical Right Angle Fitting — 4 x 4 Size
Used to join duct at 90° outside corners
Inside Vertical 45° Fitting — 2 x 2 Size
Used to join duct at 45° inside corners
Inside Vertical 45° Fitting — 4 x 4 Size
Used to join duct at 45° inside corners
Outside Vertical 45° Fitting — 2 x 2 Size
Used to join duct at 45° outside corners
Outside Vertical 45° Fitting — 4 x 4 Size
Used to join duct at 45° outside corners
ABS
Polycarbonate
ABS
Polycarbonate
ABS
Polycarbonate
ABS
Polycarbonate
ABS
Polycarbonate
ABS
Polycarbonate
ABS
Polycarbonate
ABS
Polycarbonate
ABS
Polycarbonate
ABS
Polycarbonate
ABS
Polycarbonate
ABS
Polycarbonate
ABS
Polycarbonate
ABS
Polycarbonate
Orange
Clear
Orange
Clear
Orange
Clear
Orange
Clear
Orange
Clear
Orange
Clear
Orange
Clear
Orange
Clear
Orange
Clear
Orange
Clear
Orange
Clear
Orange
Clear
Orange
Clear
Orange
Clear
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
pc.
Std.
Ctn.
Qty.
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
! ABS material parts listed in Orange (OR) color. To order other colors in ABS material substitute Yellow (YL), BL (Black), and
Light Gray (LG). Contact Factory for details.
ORDERING INF ORMAT ION:
Order number of pieces required, in multiples of Standard Package.
For Technical Assistance, call: 888-506-5400, Ext. 8287 (outside the U.S., see inside back cover for International Directory)
J3
FIBER-DUCT ™ ROUTING SYSTEM
FIBER-DUCT ™ System Fittings (cont.)
Std.
Pkg.
Qty.
FVT2X2
FVT4X4
FRA2X2
FRA4X4
FT2X2
FT4X4
FRF42
Std.
Ctn.
Qty.
Description
Material
Color!
!
Par t Number
FVT2X2OR
Vertical Tee Fitting — 2 x 2 Size
ABS
Orange 1 pc. 5 pcs.
PFVT2X2CL Used to join vertical and horizontal sections of Polycarbonate Clear 1 pc. 5 pcs.
duct
FVT4X4OR
Vertical Tee Fitting — 4 x 4 Size
ABS
Orange 1 pc. 5 pcs.
PFVT4X4CL Used to join vertical and horizontal sections of Polycarbonate Clear 1 pc. 5 pcs.
duct
FRA2X2OR Right Angle Fitting — 2 x 2 Size
ABS
Orange 1 pc. 5 pcs.
PFRA2X2CL Used to join duct at 90° flat junctions
Polycarbonate Clear 1 pc. 5 pcs.
FRA4X4OR Right Angle Fitting — 4 x 4 Size
ABS
Orange 1 pc. 5 pcs.
PFRA4X4CL Used to join duct at 90° flat junctions
Polycarbonate Clear 1 pc. 5 pcs.
FT2X2OR
Tee Fitting — 2 x 2 Size
ABS
Orange 1 pc. 5 pcs.
PFT2X2CL
Used to join duct at tee intersections
Polycarbonate Clear 1 pc. 5 pcs.
FT4X4OR
Tee Fitting — 4 x 4 size
ABS
Orange 1 pc. 5 pcs.
PFT4X4CL
Used to join duct at tee intersections
Polycarbonate Clear 1 pc. 5 pcs.
FRF42OR
Reduces 4 x 4 size duct to 2 x 2 size.
ABS
Orange 1 pc. 5 pcs.
PFRF42CL
Polycarbonate Clear 1 pc. 5 pcs.
! ABS material parts listed in Orange (OR) color. To order other colors in ABS material substitute Yellow (YL),
BL (Black), and Light Gray (LG). Contact Factory for details.
ORD ERING INFORMAT ION:
Order number of pieces required, in multiples of Standard Package.
FIBER-DUCT
™
Innerduct Transition Fittings
Part
Number
Description
Material
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Metal**
1 pc. 10 pcs.
Innerduct Transition Fitting – 2 x 2 Size
FITF2X2
FITF2X2M
FITF4X4AM
FITF4X4BM
Attaches to the end of
PANDUCT ® Type E
and Type S Duct. It can
also be attached
anywhere along the
side walls of the duct
provided the duct
fingers or side walls are
removed.
FIBER-DUCT
™
Innerduct Transition Fitting – 4 x 4 Size
FITF4X4A
Transition from 4 x 4 duct to 1-2 pcs. 1" innerduct.
Metal**
1 pc. 10 pcs.
FITF4X4B
Transition from 4 x 4 duct to 1-2 pcs. 1 1/4" innerduct.
Metal**
1 pc. 10 pcs.
** Commercial grade cold rolled steel with zinc chromate finish.
OR DERING INFORMAT ION:
Order number of pieces required, in multiples of Standard Package.
Mounting Brackets
Part
Number
FTRB12
FTRBE12
FTRBE58
Std.
Ctn.
Qty.
Bracket attaches to UNISTRUT ® Metal Framing. Accepts 1/2"
threaded rod (not included). Contains bracket and hardware for
attaching to metal framing.
1 pc.
10 pcs.
FTRBE12
Bracket attaches to existing 1/2" threaded rod (not included).
Contains bracket and hardware for attaching to threaded rods.
Bracket attaches to existing 5/8" threaded rod (not included).
Contains bracket and hardware for attaching to threaded rods.
Bracket attaches to new 1/2" threaded rod (not included).
Contains bracket and hardware for attaching to threaded rods.
Bracket attaches to new 5/8" threaded rod (not included).
Contains bracket and hardware for attaching to threaded rods.
Bracket attaches to 3/8" X 1-1/2" or 3/8" X 2" ladder rack rails.
Contains hardware for attaching bracket to ladder rack. Also contains
hardware for attaching duct/fittings to bracket.
1 pc.
10 pcs.
1 pc.
10 pcs.
1 pc.
10 pcs.
1 pc.
10 pcs.
1 pc.
10 pcs.
FTRBN12
FTRBN58
FLRB
Description
Std.
Pkg.
Qty.
FTRB12
FTRBE58
FTRBN12
FTRBN58
Provides transition from 2 x 2 duct to 3/4" to 1"
innerduct.
FLRB
UNIST RUT ® is a registered trademark of UNIST RUT Corporation
ORDERING INF ORMATION:
Order number of pieces required, in multiples of Standard Package.
For Technical Assistance, call: 888-506-5400, Ext. 8287 (outside the U.S., see inside back cover for International Directory)
J4
FIBER-DUCT ™ ROUTING SYSTEM
FIBER-DUCT ™ Mounting Brackets (cont.)
Par t
Num ber
FZBA1.5X4
FZBA1.5X4
FLB12X15
FLB12X15
FLB12X20
FLB58X15
FLB58X20
FLB12X20
FLB58X15
FLB58X20
FUSB
FLB
FUSB
FLB
FMRB
FMRB
Std.
Pkg.
Qty.
Description
Aluminum bracket used to offset duct from mounting surface,
adjustable from 1½" to 4".
Bracket attaches to 1-1/2" ladder rack rail. Bracket accepts
1/2" threaded rod (not included). Contains bracket and hardware
for attaching bracket to ladder rack.
Bracket attaches to 2" ladder rack rail. Bracket accepts 1/2"
threaded rod (not included). Contains bracket and hardware for
attaching bracket to ladder rack.
Bracket attaches to 1-1/2" ladder rack rail. Bracket accepts 5/8"
threaded rod (not included). Contains bracket and hardware for
attaching bracket to ladder rack.
Bracket attaches to 2" ladder rack rail. Bracket accepts 5/8"
threaded rod (not included). Contains bracket and hardware for
attaching bracket to ladder rack.
Bracket attaches to under-floor support pedestal (not included).
Contains bracket and hardware for attaching bracket to pedestal.
Also contains hardware for attaching duct/fittings to “L” Bracket.
“L” Bracket attaches to walls. User supplies appropriate
mounting hardware for attaching “L” Bracket to walls. Contains
bracket and hardware for attaching duct/fittings to “L” Bracket.
“L” Bracket attaches to top rail of rack for added support.
Contains bracket and hardware for attaching “L” Bracket to rack
and bracket to duct.
Std.
Ctn.
Qty.
1 pc. 10 pcs.
1 pc. 10 pcs.
1 pc. 10 pcs.
1 pc. 10 pcs.
1 pc. 10 pcs.
1 pc. 10 pcs.
1 pc. 10 pcs.
1 pc. 10 pcs.
ORDERING INF ORMATION:
Order number of pieces required, in multiples of Standard Package.
FIBER-DUCT
™
Accessories
Part
Number
NR2WH-L
NR4BL-L
Std.
Pkg.
Qty.
Description
Std.
Ctn.
Qty.
Optional snap rivet fastens duct and fittings together for added 50 pcs.
strength and rigidity. Fastener mounts flush to duct surfaces.
2" X 2" rivet white color.
Optional snap rivet fastens duct and fitting together for added 50 pcs.
strength and rigidity. Fastener mounts flush to duct surfaces.
4" X 4" rivet black color.
500
pcs.
500
pcs.
OR DERING INFORMAT ION:
Order number of pieces required, in multiples of Standard Package.
Fiber Optic Adhesive Markers
Part
Number
Legend
Par t
Number
Legend
Marker Size
W XL
In. (mm)
Markers
Per
Card
Std.
Pkg.
Qty.
Adhesive Marker Cards
• Durable markers available in
pressure sensitive card
• Legend: Black
• Background: Orange
PCV-FOA
Fiber Optic
PCV-FOCA
Fiber Optic Cable
PCV-FOB
Fiber Optic
PCV-FOCB
Fiber Optic Cable
PCV-FOC
Fiber Optic
PCV-FOCC
Fiber Optic Cable
9.00 X 2.25
(228.6 X 57.2)
4.50 X 1.19
(114.3 X 28.6)
2.25 X 0.50
(57.1 X 12.7)
1
4
5 Cards
18
ORDERING INF ORMATION:
Order number of pieces required, in multiples of Standard Package.
For Technical Assistance, call: 888-506-5400, Ext. 8287 (outside the U.S., see inside back cover for International Directory)
J5
FIBER-DUCT ™ ROUTING SYSTEM
B
Fill Capacities for PANDUCT ® Type E or Type S
FILL CAPACITIES
This information is to be used as a guide in selecting the proper size duct. The maximum amounts may vary
according to the wire installation methods, straightness of wires, etc.
SPEC=40% wir efill—the recommended design in cable capacity.
Leaves room for future moves, adds and changes
MAX=60% wirefill—the maximum cable quantity based on cable
interweaving and packing factors or UL temperature rise test for
electrical
2.25"
2.10"
A=4.0in
4.25"
2
A=16.0in
2
4.10"
E4X4
S4X4
E2X2
S2X2
Fill Capacity Table for:
·Fiber Optic Cable (62.5/125mm) ·Data Grade 24 AWG UTP
Fiber Optic Cables (62.5/125mm)
Duct Type
Size
Data Grade Cables
2 Strand
4 Strand
6 Strand
12 Strand
24 Strand
36 Strand
72 Strand
DIA.=0.24
DIA.=0.26
DIA.=0.27
DIA.=0.34
DIA.=0.55
DIA.=0.67
DIA.=0.89
24 AWG UTP CM
Cat.5 4 pr.
25 pr.
DIA=0.422 DIA=0.217
FILL
FILL
FILL
FILL
FILL
FILL
FILL
FILL
FILL
SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX
PANDUCT
Type E or S
2"X2"
PANDUCT
Type E or S
4"X4" 142
35
53
30
45
28
42
18
26
7
10
5
7
3
4
11
17
43
65
212
121
181
112
168
71
106
27
40
18
27
10
15
46
69
173
260
NOTE: See pag e xiv- xv for further explanation of the wirefill data.
For Technical Assistance, call: 888-506-5400, Ext. 8287 (outside the U.S., see inside back cover for International Directory)
J6
很抱歉,暂时无法提供与“PFT2X2CL”相匹配的价格&库存,您可以联系我们找货
免费人工找货