PV18-4RB-3K

ELECTRICAL SOLUTIONS A. System Overview Ring Terminals, Vinyl Insulated – Funnel Entry Type PV-RB • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Ring tongue design assures a secure connection in high vibration applications • Insulation support helps to prevent wire damage in bending applications • UL Flammability UL 94V-0, maximum insulation temperature 221°F (105°C) • UL and CSA rated up 600 V per UL 486A/B L B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties W C Wire Range Part Number PV18-4RNB-3K PV18-4RB-3K PV18-6RNB-3K PV18-6RB-3K PV18-8RB-3K PV18-10RB-3K PV18-14RB-3K PV18-56RB-2K PV18-38RB-2K PV14-4RB-3K 22 – 18 AWG PV14-6RNB-3K PV14-6RB-3K PV14-8RB-3K PV14-10RB-3K PV14-14RB-3K PV14-56RB-2K PV14-38RB-2K 16 – 14 AWG PV10-6RB-2K PV10-8RB-2K PV10-10RB-2K PV10-14RB-2K PV10-56RB-2K PV10-38RB-2K 12 – 10 AWG Color Code Red Blue Yellow Stock Thickness (In.) 0.03 0.03 0.04 Max. Ins. (In.) 0.150 0.170 0.225 Stud Size #4 #4 #6 #6 #8 #10 1/4" 5/16" 3/8" #4 #6 #6 #8 #10 1/4" 5/16" 3/8" #6 #8 #10 1/4" 5/16" 3/8" Figure Dimensions (In.) L 0.74 0.78 0.75 0.78 0.86 0.86 1.06 1.06 1.15 0.76 0.76 0.86 0.86 0.86 1.05 1.06 1.15 1.02 1.02 1.02 1.20 1.20 1.23 W 0.21 0.25 0.23 0.25 0.31 0.31 0.45 0.46 0.53 0.25 0.25 0.31 0.31 0.31 0.45 0.46 0.53 0.31 0.31 0.31 0.52 0.52 0.58 CA9 Series Crimp Die C 0.19 0.20 0.19 0.20 0.25 0.25 0.38 0.38 0.43 0.22 0.22 0.25 0.25 0.25 0.38 0.38 0.43 0.31 0.31 0.31 0.38 0.38 0.38 CA-800/EZ Series Crimp Die CD9-1A CD-800-1 CD9-1B CD9-2A CD-800-2 CD9-2B CD9-3B CD-800-3 Pieces Per Reel 3000 3000 3000 3000 3000 3000 3000 2000 2000 3000 3000 3000 3000 3000 3000 2000 2000 2000 2000 2000 2000 2000 2000 For applicator information, see page D1.143. Multiple Stud Ring Terminals, Vinyl Insulated – Funnel Entry • Insulation support helps to prevent wire damage in bending applications • UL Flammability UL 94V-0, maximum insulation temperature 221°F (105°C) • UL and CSA rated up 600 V per UL 486A/B W Part Number PV18-610RB-3K Stock Thickness (In.) 0.03 Max. Ins. (In.) 0.150 PV14-610RB-3K 16 – 14 AWG Blue 0.03 0.170 PV10-610RB-2K 12 – 10 AWG Yellow 0.04 0.225 Stud Size #6, #8, #10 Figure Dimensions (In.) L 0.95 W 0.31 C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E2. Labels E4. Permanent Identification C Color Code Red C3. Abrasion Protection E3. Pre-Printed & Write-On Markers L Wire Range 22 – 18 AWG C2. Surface Raceway E1. Labeling Systems Type PV-610RB • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Teardrop shaped mounting hole of multiple stud terminals permits use with #6, #8, or #10 size studs • Ring tongue design assures a secure connection in high vibration applications C1. Wiring Duct C 0.25 CA9 Series Crimp Die CD9-1A CA-800/EZ Series Crimp Die CD-800-1 Pieces Per Reel 3000 0.95 0.31 0.25 CD9-2A CD-800-2 3000 1.17 0.37 0.31 CD9-3B CD-800-3 2000 For applicator information, see page D1.143. For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory) E5. Lockout/ Tagout & Safety Solutions F. Index