S4-C

PANDUCT ® Accessories—Mounting Brackets & Fasteners Part Number Screw Provided Part Number Screw Required Std. Pkg. Qty. For Duct Width Inches (mm) PANDUCT ® Snap-Clip Mounting Bracket—Type G, F & FS Duct With Mounting Screw Snap Clip—Types G, F, & FS • • • • • Duct easily snaps into bracket No mounting holes required in duct Ensures no metal is inside the duct Snap- clip spacing is not critical Simplifies fabrication drawings and panel layout S1F-C S1.5F-C S2F-C S3F-C S4F-C Without Mounting Screw #8-32x1/4 (Provided) SNS1F-C SNS1.5F-C SNS2F-C SNS3F-C SNS4F-C #8-32x1/4 (User Supplied) 1.00" (25.4) 1.50" (38.1) 2.00" (50.8) 3.00" (76.2) 4.00" (101.6) 100 pcs. Snap-clip provided with or without self tapping screw. Made from nickel plated spring steel. ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty. Part Number Screw Provided Part Number Screw Required Std. Pkg. Qty. For Duct Width Inches (mm) PANDUCT ® Snap-Clip Mounting Bracket—Type NE, NS, PE, PS, D, E & S Duct With Mounting Screw S.5-C S.75-C Snap Clip—Types NE, NS, PE, PS, D, E & S • • • • • Duct easily snaps into bracket No mounting holes required in duct Ensures no metal is inside the duct Snap-clip spacing is not critical Simplifies fabrication drawings and panel layout S1-C S1.5-C S2-C S2.5-C S3-C S4-C Without Mounting Screw #6-32x1/4 (Provided) SNS.5-C SNS.75-C #8-32x1/4 (Provided) SNS1-C SNS1.5-C SNS2-C SNS2.5-C SNS3-C SNS4-C #6-32x1/4 (User Supplied) .50" (12.7) .75" (19.1) 100 pcs. #8-32x1/4 (User Supplied) 1.00" (25.4) 1.50" (38.1) 2.00" (50.8) 2.50" (63.5) 3.00" (76.2) 4.00" (101.6) 100 pcs. Snap-clip provided with or without self tapping screw. Made from nickel plated spring steel. ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty. Part Number Description Thread Size For Duct Width Inches (mm) Std. Pkg. Qty. PANDUCT ® Stud Type Fasteners—For all Duct/Raceway Types F1-C F1.5-C F2-C F3-C F4-C Stud Type Fasteners • Secures cover in place during shipping or extreme vibration • Provides tamper resistance • Fits into the standard mounting holes available on duct.† Corrosion resistant zinc plated steel stud with fastener. Secures cover in place. Also used to mount a smaller size duct within a larger duct. 10/24 threads on each end 1.00" (25.4) 1.50" (38.1) 2.00" (50.8) 3.00" (76.2) 4.00" (101.6) 100 pcs. †A .200" (5mm) hole must be drilled in the cover to accommodate the fastener ORDERING INFORMATION: Order number of pieces required in multiples of standard pkg. qty. • Can be used to mount a smaller size duct within larger duct to create a completely separate channel 27