1.5SMC180AS_R1_00001

1.5SMC10AS ~ 1.5SMC250CAS Series Transient Voltage Suppressor Voltage 10~250 V SMC 1500 W Power Features  Fast response time  Low incremental surge resistance  Ultra thin profile package for space constrained utilization.  High temperature soldering : 260oC /10 seconds at terminals  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard Mechanical Data  Case: Molded plastic, SMC  Terminals: Solder plated, solderable per MIL-STD-750, Method 2026  Approx. Weight: 0.0082 ounces, 0.2325 grams Maximum Ratings and Thermal Characteristics (TA = 25 oC unless otherwise noted) PARAMETER SYMBOL Peak Pulse Power Dissipation(tp = 10 / 1000 us) Peak Pulse Current on tp = 10 / 1000 us waveform(Fig.2) Power Dissipation on Infinite Heat Sink at TL = 50 oC ESD IEC61000-4-2(Air) Typical Thermal Resistance Junction to Ambient Storage Temperature Range October 7,2021 UNITS 1500 W IPPM (1) See table 1 A PD 6.5 W PPP (1) (2) VESD ESD IEC61000-4-2(Contact) Operating Junction Temperature Range LIMIT ±30 ±30 kV RθJA (3) 125 oC/W TJ -55~150 oC TSTG -55~150 oC 1.5SMC10AS_SERIES-REV.02 Page 1 1.5SMC10AS ~ 1.5SMC250CAS Series Electrical Characteristics (TA = 25 oC unless otherwise noted) IR VBR Part Number UNI VRWM BI VC@IPP @VRWM Marking Code Min. Max. IT uA V V V mA UNI BI V A UNI BI 1500W Transient Voltage Suppressor 1.5SMC10AS 1.5SMC10CAS 8.55 9.5 10.5 1 10 20 14.5 103 MC10AS MC10CAS 1.5SMC11AS 1.5SMC11CAS 9.4 10.5 11.6 1 5 10 15.6 96 MC11AS MC11CAS 1.5SMC12AS 1.5SMC12CAS 10.2 11.4 12.6 1 5 5 16.7 90 MC12AS MC12CAS 1.5SMC13AS 1.5SMC13CAS 11.1 12.4 13.7 1 1 1 18.2 82 MC13AS MC13CAS 1.5SMC15AS 1.5SMC15CAS 12.8 14.3 15.8 1 1 1 21.2 71 MC15AS MC15CAS 1.5SMC16AS 1.5SMC16CAS 13.6 15.2 16.8 1 1 1 22.5 67 MC16AS MC16CAS 1.5SMC18AS 1.5SMC18CAS 15.3 17.1 18.9 1 1 1 25.2 59.5 MC18AS MC18CAS 1.5SMC20AS 1.5SMC20CAS 17.1 19 21 1 1 1 27.7 54 MC20AS MC20CAS 1.5SMC22AS 1.5SMC22CAS 18.8 20.9 23.1 1 1 1 30.6 49 MC22AS MC22CAS 1.5SMC24AS 1.5SMC24CAS 20.5 22.8 25.2 1 1 1 33.2 45 MC24AS MC24CAS 1.5SMC27AS 1.5SMC27CAS 23.1 25.7 28.4 1 1 1 37.5 40 MC27AS MC27CAS 1.5SMC30AS 1.5SMC30CAS 25.6 28.5 31.5 1 1 1 41.4 36 MC30AS MC30CAS 1.5SMC33AS 1.5SMC33CAS 28.2 31.4 34.7 1 1 1 45.7 33 MC33AS MC33CAS 1.5SMC36AS 1.5SMC36CAS 30.8 34.2 37.8 1 1 1 49.9 30 MC36AS MC36CAS 1.5SMC39AS 1.5SMC39CAS 33.3 37.1 41 1 1 1 53.9 28 MC39AS MC39CAS 1.5SMC43AS 1.5SMC43CAS 36.8 40.9 45.2 1 1 1 59.3 25.3 MC43AS MC43CAS 1.5SMC47AS 1.5SMC47CAS 40.2 44.7 49.4 1 1 1 64.8 23.2 MC47AS MC47CAS 1.5SMC51AS 1.5SMC51CAS 43.6 48.5 53.6 1 1 1 70.1 21.4 MC51AS MC51CAS 1.5SMC56AS 1.5SMC56CAS 47.8 53.2 58.8 1 1 1 77 19.5 MC56AS MC56CAS 1.5SMC62AS 1.5SMC62CAS 53 58.9 65.1 1 1 1 85 17.7 MC62AS MC62CAS 1.5SMC68AS 1.5SMC68CAS 58.1 64.6 71.4 1 1 1 92 16.3 MC68AS MC68CAS 1.5SMC75AS 1.5SMC75CAS 64.1 71.3 78.8 1 1 1 103 14.6 MC75AS MC75CAS 1.5SMC82AS 1.5SMC82CAS 70.1 77.9 86.1 1 1 1 113 13.3 MC82AS MC82CAS 1.5SMC91AS 1.5SMC91CAS 77.8 86.5 95.5 1 1 1 125 12 MC91AS MC91CAS 1.5SMC100AS 1.5SMC100CAS 85.5 95 105 1 1 1 137 11 MC1AAS MC1ACAS 1.5SMC110AS 1.5SMC110CAS 94 105 116 1 1 1 152 9.9 MC1BAS MC1BCAS 1.5SMC120AS 1.5SMC120CAS 102 114 126 1 1 1 165 9.1 MC1CAS MC1CCAS 1.5SMC130AS 1.5SMC130CAS 111 124 137 1 1 1 179 8.4 MC1DAS MC1DCAS 1.5SMC150AS 1.5SMC150CAS 128 143 158 1 1 1 207 7.2 MC1EAS MC1ECAS October 7,2021 1.5SMC10AS_SERIES-REV.02 Page 2 1.5SMC10AS ~ 1.5SMC250CAS Series Electrical Characteristics (TA = 25 oC unless otherwise noted) IR VBR Part Number UNI VRWM BI VC@IPP @VRWM Marking Code Min. Max. IT uA V V V mA UNI BI V A UNI BI 1500W Transient Voltage Suppressor 1.5SMC160AS 1.5SMC160CAS 136 152 168 1 1 1 219 6.8 MC1FAS MC1FCAS 1.5SMC170AS 1.5SMC170CAS 145 162 179 1 1 1 234 6.4 MC1GAS MC1GCAS 1.5SMC180AS 1.5SMC180CAS 154 171 189 1 1 1 246 6.1 MC1HAS MC1HCAS 1.5SMC200AS 1.5SMC200CAS 171 190 210 1 1 1 274 5.5 MC2IAS MC2ICAS 1.5SMC220AS 1.5SMC220CAS 185 209 231 1 1 1 328 4.6 MC2JAS MC2JCAS 1.5SMC250AS 1.5SMC250CAS 214 237 263 1 1 1 344 4.5 MC2KAS MC2KCAS Notes : 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig.2 2. Mounted on 100cm2 copper pads to each terminal 3. Mounted on a FR4 PCB, single-sided copper, standard footprint October 7,2021 1.5SMC10AS_SERIES-REV.02 Page 3 1.5SMC10AS ~ 1.5SMC250CAS Series PPPM - Peak Pulse Power(kW) 100 Non-Repetitive Pulse Waveform Shown in Figure 3 TA = 25°C 10 1 0.1 1 10 100 1,000 10,000 PPP or IPP Derating Percentage (%) TYPICAL CHARACTERISTIC CURVES 110 100 90 80 70 60 50 40 30 20 10 0 0 25 Fig.1 Pulse Power Rating Curve 75 100 125 150 175 200 Fig.2 Derating Curve 100,000 110 100 90 80 70 60 50 40 30 20 10 0 CJ - Junction Capacitance(pF) Percent of IPP (%) 50 TA - Ambient Temperature(℃) td - Pulse Width(us) 50% of IPP@1000us Rise time 10~90%-10us 0 1 2 3 Time (ms) Fig.3 10/1000us Pulse Waveform October 7,2021 4 Uni-direconal VR = 0 V 10,000 1,000 100 Bi-direconal VR = 0 V 10 1 10 100 1000 VRWM - Reverse Stand-off Voltage (V) Fig.4 Typical Capacitance 1.5SMC10AS_SERIES-REV.02 Page 4 1.5SMC10AS ~ 1.5SMC250CAS Series Part No. Packing Code Version Part No. Packing Code Package Type Packing Type Marking Version 1.5SMCxxxxAS_R1_00001 SMC 0.8K pcs / 7” reel See Table Halogen free RoHS compliant Packaging Information & Mounting Pad Layout SMC Dimension October 7,2021 Unit: inch(mm) SMC Pad Layout 1.5SMC10AS_SERIES-REV.02 Unit: inch(mm) Page 5 1.5SMC10AS ~ 1.5SMC250CAS Series Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. October 7,2021 1.5SMC10AS_SERIES-REV.02 Page 6