1.5SMC22A_R1_00001

1.5SMC6.8A ~ 1.5SMC250CA Series GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watt BREAK DOWN VOLTAGE 6.8 to 250 Volt FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in SMC/DO-214AB pa ckage • 1500W surge capability at 1ms • Excellent clamping capability • Low zener i mpedance • Fast response time: typically less than 1 ps from 0 volts to BV min • High te mperature soldering guaranteed: 260°C/10 se conds/0.375",(9.5mm) lead length/5lbs., (2.3kg) tension • ESD IEC-61000-4-2 Air + 30kV, Contact + 30kV • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard MECHANICAL DATA • Case : JEDEC SMC/DO-214AB molded plastic • Terminals : Solderable per MIL-STD-750, Method 2026 • Polarity : Color band denotes cathode end • Approx. Weight : 0.2325 grams DEVICES FOR BIPOLARAPPLICATIONS For Bidirectional use CA Suffix for types 1.5SMC6.8CA thru types 1.5SMC250CA Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Rating at 25°Ca mbient temperature unless otherwise specified. Rating Symbol Value Units Peak Power Dissipation at TA=25OC, tp=1ms (Notes 1) PPP 1500 Watts Typical Thermal Resistance Junction to Air (Notes 2) RθJA 50 Peak Pulse Current on tp=10/1000us waveform (Notes 1) I PPM see Table Amps Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (Notes 3) I 200 Amps ESD IEC-61000-4-2 (Air) ESD IEC-61000-4-2 (Contact) VESD +30 +30 kV TJ,TSTG -55 to +150 Operating Junction and Storage Temperature Range FSM O C/ W O C NOTES : 1. Non-repetitive current pulse, per Fig. 3 and derated above TA =25°C per Fig. 2. 2. Mounted on Copper Leaf area of 0.79 in 2(20mm2). 3. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum. 4. A transient suppressor is selected according to the working peak reverse voltage (V RWM), which should be equal to or greater than the DC or continuous peak operating voltage level. December 29,2022 1.5SMC6.8A_SERIES-REV.11 PAGE . 1 1.5SMC6.8A ~ 1.5SMC250CA Series Re ve rs e S ta nd -o ff Vo lta g e B re a k d o wn Vo ltag e TestC urrent Reverse Leakage Max. C lamp Voltage 10/1000us Peak Pulse Current 10/1000us Marking Code Part Number VBR @ IT IR @ VRWM V RW M (Notes 4) UNI BI IT Mi n. Ma x. V V V 5.8 6.45 VC @ IPP IPP uA V A UNI BI 1000 2000 10.5 143 FZB JZB UNI BI mA uA 7.14 10 1500W Transient Voltage Suppressor 1.5SMC6.8A 1.5SMC6.8CA 1.5SMC7.5A 1.5SMC7.5CA 6.4 7.13 7.88 10 500 1000 11.3 132 FZD JZD 1.5SMC8.2A 1.5SMC8.2CA 7.02 7.79 8.61 10 200 400 12.1 124 FZF JZF 1.5SMC9.1A 1.5SMC9.1CA 7.78 8.65 9.5 1 50 100 13.4 112 FZH JZH 1.5SMC10A 1.5SMC10CA 8.55 9.5 10.5 1 10 20 14.5 103 FZK JZK 1.5SMC11A 1.5SMC11CA 9.4 10.5 11.6 1 5 10 15.6 96 FZM JZM 1.5SMC12A 1.5SMC12CA 10.2 11.4 12.6 1 5 5 16.7 90 FZP JZP 1.5SMC13A 1.5SMC13CA 11.1 12.4 13.7 1 1 1 18.2 82 FZR JZR 1.5SMC15A 1.5SMC15CA 12.8 14.3 15.8 1 1 1 21.2 71 FZT JZT 1.5SMC16A 1.5SMC16CA 13.6 15.2 16.8 1 1 1 22.5 67 FZV JZV 1.5SMC18A 1.5SMC18CA 15.3 17.1 18.9 1 1 1 25.2 59.5 FZX JZX 1.5SMC20A 1.5SMC20CA 17.1 19 21 1 1 1 27.7 54 FZZ JZZ 1.5SMC22A 1.5SMC22CA 18.8 20.9 23.1 1 1 1 30.6 49 FXB JXB 1.5SMC24A 1.5SMC24CA 20.5 22.8 25.2 1 1 1 33.2 45 FXD JXD 1.5SMC27A 1.5SMC27CA 23.1 25.7 28.4 1 1 1 37.5 40 FXF JXF 1.5SMC30A 1.5SMC30CA 25.6 28.5 31.5 1 1 1 41.4 36 FXH JXH 1.5SMC33A 1.5SMC33CA 28.2 31.4 34.7 1 1 1 45.7 33 FXK JXK 1.5SMC36A 1.5SMC36CA 30.8 34.2 37.8 1 1 1 49.9 30 FXM JXM 1.5SMC39A 1.5SMC39CA 33.3 37.1 41 1 1 1 53.9 28 FXP JXP 1.5SMC43A 1.5SMC43CA 36.8 40.9 45.2 1 1 1 59.3 25.3 FXR JXR 1.5SMC47A 1.5SMC47CA 40.2 44.7 49.4 1 1 1 64.8 23.2 FXT JXT 1.5SMC51A 1.5SMC51CA 43.6 48.5 53.6 1 1 1 70.1 21.4 FXV JXV 1.5SMC56A 1.5SMC56CA 47.8 53.2 58.8 1 1 1 77 19.5 FXX JXX 1.5SMC62A 1.5SMC62CA 53 58.9 65.1 1 1 1 85 17.7 FXZ JXZ 1.5SMC68A 1.5SMC68CA 58.1 64.6 71.4 1 1 1 92 16.3 FYB JYB 1.5SMC75A 1.5SMC75CA 64.1 71.3 78.8 1 1 1 103 14.6 FYD JYD 1.5SMC82A 1.5SMC82CA 70.1 77.9 86.1 1 1 1 113 13.3 FYF JYF 1.5SMC91A 1.5SMC91CA 77.8 86.5 95.5 1 1 1 125 12 FYH JYH 1.5SMC100A 1.5SMC100CA 85.5 95 105 1 1 1 137 11 FYK JYK 1.5SMC110A 1.5SMC110CA 94 105 116 1 1 1 152 9.9 FYM JYM 1.5SMC120A 1.5SMC120CA 102 114 126 1 1 1 165 9.1 FYP JYP 1.5SMC130A 1.5SMC130CA 111 124 137 1 1 1 179 8.4 FYR JYR 1.5SMC150A 1.5SMC150CA 128 143 158 1 1 1 207 7.2 FYT JYT 1.5SMC160A 1.5SMC160CA 136 152 168 1 1 1 219 6.8 FYV JYV 1.5SMC170A 1.5SMC170CA 145 162 179 1 1 1 234 6.4 FYX JYX 1.5SMC180A 1.5SMC180CA 154 171 189 1 1 1 246 6.1 FYZ JYZ 1.5SMC200A 1.5SMC200CA 171 190 210 1 1 1 274 5.5 FWB JWB 1.5SMC220A 1.5SMC220CA 185 209 231 1 1 1 328 4.6 FWD JWD 1.5SMC250A 1.5SMC250CA 214 237 263 1 1 1 344 4.5 FWF JWF December 29,2022 1.5SMC6.8A_SERIES-REV.11 PAGE . 2 100 PEAK PULSE FORWARD (P PP) OR CURRENT (I PP) DERATING IN PERCENTAGE % P PPM ,PEAK PULSE FORWARD,KW 1.5SMC6.8A ~ 1.5SMC250CA Series No n-Re petitive Pu lse Waveform Sh own in Fi gure.3 O T A = 25 C 10 1.0 0.1 0.1 1.0 10 100 1000 100 75 50 25 0 10000 0 td,PULSE WIDTH,usec 75 100 125 10 4 TA = 25 C Pulse Wid th (td ) is Define d as the Point Where t he Pea k Current Decays t o 5 0% of Ip p Pea k Va lue Ip p m 100 Ha lf Va lue -Ip p 2 10/1000u sec Wave form a s Defined bye R.E.A. 50 100 10 1.0 2.0 3.0 Me asure d a t Stan d -Off Volta ge(V RWM ) 5.0 10 20 50 100 200 500 4.0 V (BR) , BREAKDOWN VOLTAGE, VOLTS T,TIME,ms Fig.4 TYPICAL JUNCTION CAPACITANCE Fig.3 PUL SE WAVEFOR M 200 Me asured at Zero Bia s Unidirectional Bidirectional td 0 200 Tj= 25 C f= 1.0MHZ Vsig = 50mVp -p 1,000 e-kt 0 175 Fig.2 PUL SE DE RATING CU RVE 150 tf= 10 150 O CJ,CAPACITANCE, pF I PPM ,PEAK PULSE CURRENT,% 50 T A ,AMBIENT TEMPERATURE, C Fig.1 PE AK PU LSE PO WER RATING VE RS US PU LSE TIME CU RVE IFSM ,PEAK FORWARD SURGE CURRENT AMPERES 25 Tj= Tj m a x 8.3ms SINGLE HALF sinc e -WAVE JEDEC METHOD 100 50 UNIDIRECTIONAL ONLY 10 1 5 10 50 100 NUMBER OF CYCLES AT 60 Hz Fig.5 MAXIMUN NON-REPETITEVE PEAK FORWARD SURGE CURRENT UNIDIRECTIONAL December 29,2022 1.5SMC6.8A_SERIES-REV.11 PAGE . 4 1.5SMC6.8A ~ 1.5SMC250CA Series MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.8K per 7" plastic Reel December 29,2022 1.5SMC6.8A_SERIES-REV.11 PAGE . 5 1.5SMC6.8A ~ 1.5SMC250CA Series Part No._packing code_Version 1.5SMC6.8A_R1_00001 1.5SMC6.8A_R2_00001 For example : RB500V-40_R2_00001 ˙Serial number ˙ Part No. ˙Version code means Halogen free RoHS compliant ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Serial number XXXX Version Code X Packing type 1st Code Packing size code 2nd Code HSF Level 1st Code 2nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 Halogen free RoHS compliant 0 serial number Tape and Reel (T/R) R 7" 1 RoHS compliant 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X S 52mm Y L PANASERT T/B CATHODE UP (PBCU) U F PANASERT T/B CATHODE DOWN (PBCD) D Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING December 29,2022 1.5SMC6.8A_SERIES-REV.11 PAGE . 6 1.5SMC6.8A ~ 1.5SMC250CA Series Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. December 29,2022 1.5SMC6.8A_SERIES-REV.11 PAGE . 6