1.5SMCJ100A_R1_00001

1.5SMCJ5.0A ~ 1.5SMCJ220CA Series SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watt STAND-OFF VOLTAGE 5 to 220 Volt Recongnized File # E210467 (1.5SMCJ5.0A~1.5SMCJ170CA) FEATURES • For surface mounted applications in order to optimize board space. • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals • ESD IEC-61000-4-2 Air + 30kV, Contact + 30kV • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard MECHANICAL DATA • Case : JEDEC DO-214AB,Molded plastic over passivated junction. • Terminals : Solder plated,solderable per MIL-STD-750, Method 2026 • Polarity : Color band denotes cathode end • Standard Packaging : 16mm tape (EIA-481) • Approx. Weight : 0.2325 gram DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use CA Suffix for types 1.5SMCJ5.0CA thru types 1.5SMCJ220CA Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. For Capacitive load derate current by 20%. Rating Symbol Value Units Peak Power Dissipation at TA=25OC, tp=1ms (Notes 1) PPP 1500 W Peak Pulse Current on tp=10/1000us waveform (Notes 1) I PPM See table A Typical Thermal Resistance Junction to Air (Notes 2) RθJA 50 Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (Notes 3) I ESD IEC-61000-4-2 (Air) ESD IEC-61000-4-2 (Contact) Operating Junction and Storage Temperature Range O C/ W 200 A VESD +30 +30 kV TJ,TSTG -55 to +150 FSM O C NOTES : 1.Non-repetitive current pulse, per Fig. 3 and derated above T A=25°Cper Fig. 2. 2.Mounted on 2mm 2 (0.013mm thick) land areas. 3.Measured on 8.3ms, single hal f sine-wave or equivalent square wave, duty cycle= 4 pulses per minutes maximum. 4.A transient suppressor is selected according to the working peak reverse voltage (V RWM), which should be equal to or greater than the DC or continuous peak operating voltage level. December 29,2022 1.5SMCJ5.0A_SERIES-REV.11 PAGE . 1 1.5SMCJ5.0A ~ 1.5SMCJ220CA Series R e ve r s e S t a nd - o f f Vo l t a g e B reakdow n Vo l t a g e Test Current Reverse Leakage Max. Clamp Voltage 10/1000μs Peak Pulse Current 10/1000μs VC @ I PP I PP V A Marking Code Part Number V BR @ I T V RW M ( No t e s 4 ) UN I BI V I R @ VRWM IT M i n. M a x. UN I BI V V mA uA uA U NI BI 1500W Transient Voltage Suppressor 1.5SMCJ5.0A 1.5SMCJ5.0CA 5 6.4 7.25 10 1000 2000 9.2 163 GDE BDE 1.5SMCJ6.0A 1.5SMCJ6.0CA 6 6.67 7.67 10 1000 2000 10.3 145.6 GDG BDG 1.5SMCJ6.5A 1.5SMCJ6.5CA 6.5 7.22 8.3 10 500 1000 11.2 133.9 GDK BDK 1.5SMCJ7.0A 1.5SMCJ7.0CA 7 7.78 8.95 10 200 400 12 125 GDM BDM 1.5SMCJ7.5A 1.5SMCJ7.5CA 7.5 8.33 9.58 1 100 200 12.9 116.3 GDP BDP 1.5SMCJ8.0A 1.5SMCJ8.0CA 8 8.89 10.23 1 50 100 13.6 110.3 GDR BDR 1.5SMCJ8.5A 1.5SMCJ8.5CA 8.5 9.44 10.82 1 25 50 14.4 104.2 GDT BDT 1.5SMCJ9.0A 1.5SMCJ9.0CA 9 10 11.5 1 10 20 15.4 97.4 GDV BDV 1.5SMCJ10A 1.5SMCJ10CA 10 11.1 12.8 1 5 5 17 88.2 GDX BDX 1.5SMCJ11A 1.5SMCJ11CA 11 12.2 14 1 1 1 18.2 82.4 GDZ BDZ 1.5SMCJ12A 1.5SMCJ12CA 12 13.3 15.3 1 1 1 19.9 75.3 GEE BEE 1.5SMCJ13A 1.5SMCJ13CA 13 14.4 16.5 1 1 1 21.5 69.7 GEG BEG 1.5SMCJ14A 1.5SMCJ14CA 14 15.6 17.9 1 1 1 23.2 64.7 G EK BEK 1.5SMCJ15A 1.5SMCJ15CA 15 16.7 19.2 1 1 1 24.4 61.5 GEM BEM 1.5SMCJ16A 1.5SMCJ16CA 16 17.8 20.5 1 1 1 26 57.7 GEP BEP 1.5SMCJ17A 1.5SMCJ17CA 17 18.9 21.7 1 1 1 27.6 53.3 G ER BER 1.5SMCJ18A 1.5SMCJ18CA 18 20 23.3 1 1 1 29.2 51.4 GET BET 1.5SMCJ20A 1.5SMCJ20CA 20 22.2 25.5 1 1 1 32.4 46.3 GEV BEV 1.5SMCJ22A 1.5SMCJ22CA 22 24.4 28 1 1 1 35.5 42.2 GEX BEX 1.5SMCJ24A 1.5SMCJ24CA 24 26.7 30.7 1 1 1 38.9 38.6 GEZ BEZ 1.5SMCJ26A 1.5SMCJ26CA 26 28.9 33.2 1 1 1 42.1 35.6 GFE BFE 1.5SMCJ28A 1.5SMCJ28CA 28 31.1 35.8 1 1 1 45.4 33 G FG BFG 1.5SMCJ30A 1.5SMCJ30CA 30 33.3 38.3 1 1 1 48.4 31 GFK BFK 1.5SMCJ33A 1.5SMCJ33CA 33 36.7 42.2 1 1 1 53.3 28.1 GFM BFM 1.5SMCJ36A 1.5SMCJ36CA 36 40 46 1 1 1 58.1 25.8 GFP BFP 1.5SMCJ40A 1.5SMCJ40CA 40 44.4 51.1 1 1 1 64.5 23.2 GFR BFR 1.5SMCJ43A 1.5SMCJ43CA 43 47.8 55 1 1 1 69.4 21.6 GFT BFT 1.5SMCJ45A 1.5SMCJ45CA 45 50 57.5 1 1 1 72.7 20.6 GFV BFV 1.5SMCJ48A 1.5SMCJ48CA 48 53.3 61.3 1 1 1 77.4 19.4 GFX BFX 1.5SMCJ51A 1.5SMCJ51CA 51 56.7 65.2 1 1 1 82.4 18.2 GFZ BFZ 1.5SMCJ54A 1.5SMCJ54CA 54 60 69 1 1 1 87.1 17.2 GGE BGE 1.5SMCJ58A 1.5SMCJ58CA 58 64.4 74.1 1 1 1 93.6 16 GGG BGG 1.5SMCJ60A 1.5SMCJ60CA 60 66.7 76.7 1 1 1 96.8 15.5 GGK BGK 1.5SMCJ64A 1.5SMCJ64CA 64 71.1 81.8 1 1 1 103 14.6 GGM BGM 1.5SMCJ70A 1.5SMCJ70CA 70 77.8 89.5 1 1 1 113 13.3 GGP BGP 1.5SMCJ75A 1.5SMCJ75CA 75 83.3 95.8 1 1 1 121 12.4 GGR BGR 1.5SMCJ78A 1.5SMCJ78CA 78 86.7 99.7 1 1 1 126 11.4 GGT BGT 1.5SMCJ85A 1.5SMCJ85CA 85 94.4 108.2 1 1 1 137 10.4 GGV BGV 1.5SMCJ90A 1.5SMCJ90CA 90 100 115.5 1 1 1 146 10.3 GGX BGX 1.5SMCJ100A 1.5SMCJ100CA 100 111 128 1 1 1 162 9.3 GGZ BGZ 1.5SMCJ110A 1.5SMCJ110CA 110 122 140.5 1 1 1 177 8.4 GHE BHE 1.5SMCJ120A 1.5SMCJ120CA 120 133 153 1 1 1 193 7.9 GHG BHG 1.5SMCJ130A 1.5SMCJ130CA 130 144 165.5 1 1 1 209 7.2 GHK BHK 1.5SMCJ150A 1.5SMCJ150CA 150 167 192.5 1 1 1 243 6.2 GHM BHM 1.5SMCJ160A 1.5SMCJ160CA 160 178 205 1 1 1 259 5.8 GHP BHP 1.5SMCJ170A 1.5SMCJ170CA 170 189 217.5 1 1 1 275 5.5 GHR BHR 1.5SMCJ180A 1.5SMCJ180CA 180 198 230.4 1 1 1 292 5.1 GHT BHT 1.5SMCJ190A 1.5SMCJ190CA 190 209 243.2 1 1 1 308 4.8 GHV BHV 1.5SMCJ200A 1.5SMCJ200CA 200 220 256 1 1 1 324 4.6 GHX BHX 1.5SMCJ210A 1.5SMCJ210CA 210 231 268.8 1 1 1 340 4.4 GHZ BHZ 1.5SMCJ220A 1.5SMCJ220CA 220 242 281.6 1 1 1 356 4.2 GIE BIE December 29,2022 1.5SMCJ5.0A_SERIES-REV.11 PAGE . 2 1.5SMCJ5.0A ~ 1.5SMCJ220CA Series 110 PPP or IPP Derating Percentage (%) PPPM - Peak Pulse Power(kW) 100 100 Non-Repetitive Pulse Waveform Shown in Figure 3 TA=25℃ 10 1 0.1 1 10 100 1,000 10,000 td - Pulse Width(us) 90 80 70 60 50 40 30 20 10 0 0 25 Fig.1 Peak Pulse Power Rating Curve CJ - Junction Capacitance(pF) 90 Percent of IPP (%) 100 125 150 175 200 100,000 100 50% of IPP@1000us 80 70 60 50 40 30 Rise time 10~90%-10μs 20 10 VR=0V 1 2 Time (ms) 3 4 Unidirectional 10,000 1,000 Bidirectional 100 10 0 Fig.3 10/1000us Pulse Waveform December 29,2022 75 Fig.2 Derating Curve 110 0 50 TA - Ambient Temperature(℃) 1 10 VRWM - Reverse Stand-off Voltage (V) 100 Fig.4 Typical Capacitance 1.5SMCJ5.0A_SERIES-REV.11 PAGE . 3 1.5SMCJ5.0A ~ 1.5SMCJ220CA Series MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.8K per 7" plastic Reel December 29,2022 1.5SMCJ5.0A_SERIES-REV.11 PAGE . 4 1.5SMCJ5.0A ~ 1.5SMCJ220CA Series Part No._packing code_Version 1.5SMCJ5.0A_R1_00001 1.5SMCJ5.0A_R2_00001 For example : RB500V-40_R2_00001 ˙Serial number ˙ Part No. ˙Version code means Halogen free RoHS compliant ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Serial number XXXX Version Code X Packing type 1st Code Packing size code 2nd Code HSF Level 1st Code 2nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 Halogen free RoHS compliant 0 serial number Tape and Reel (T/R) R 7" 1 RoHS compliant 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X S 52mm Y L PANASERT T/B CATHODE UP (PBCU) U F PANASERT T/B CATHODE DOWN (PBCD) D Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING December 29,2022 1.5SMCJ5.0A_SERIES-REV.11 PAGE . 5 1.5SMCJ5.0A ~ 1.5SMCJ220CA Series Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. December 29,2022 1.5SMCJ5.0A_SERIES-REV.11 PAGE . 6