1N5937B_R2_00001

1N5921B~1N5942B SILICON ZENER DIODES VOLTAGE 6.8 to 51 Volt POWER 1.5 Watt DO-41 Unit: inch(mm) FEATURES • Low profile package .034(.86) 1.0(25.4)MIN. • Built-in strain relief • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O .028(.71) .205(5.2) .160(4.1) • Lead free in compliance with EU RoHS 2011/65/EU directive MECHANICAL DATA • Case: JEDEC DO-41,Molded plastic over passivated junction. • Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 1.0(25.4)MIN. .107(2.7) • Polarity: Color band denotes positive end (cathode) • Standard packing: 52mm tape • Weight: 0.0118 ounce, 0.336 gram .080(2.0) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Parameter DC Power Dissipation on TA=75 O C ,Measure at Zero Lead Length Derate above 75O C ( NOTE 1) Operating Junction and StorageTemperature Range Symbol Value Units PD 1.5 Watts TJ , TSTG -55 to +150 O C NOTES: 1.Mounted on 5.0mm2 (.013mm thick) land areas. STAD-FEB.10.2009 1 PAGE . 1 1N5921B~1N5942B N o m i na l Ze ne r V o l t a g e Part Number Maximum Leakage Current M a x i m u m Z e n e r Im p e d a n c e IR VR No m. V V Z @ IZT M i n. V M a x. V Ω mA Ω mA µA V 1N5921B 6.8 6.46 7.14 3 55.1 200 1 5 5.2 1N5922B 7.5 7.13 7.88 3 50 400 0.5 5 6 1N5923B 8.2 7.79 8.61 4 45.7 400 0.5 5 6.5 1N5924B 9.1 8.65 9.56 4 41.2 500 0.5 5 7 1N5925B 10 9.5 10.5 5 37.5 500 0.25 5 8 1N5926B 11 10.45 11.55 6 34.1 550 0.25 1 8.4 1N5927B 12 11.4 12.6 7 31.2 550 0.25 1 9.1 1N5928B 13 12.35 13.65 7 28.8 550 0.25 1 9.9 1N5929B 15 14.25 15.75 9 25 600 0.25 1 11.4 1N5930B 16 15.2 16.8 10 23.4 600 0.25 1 12.2 1N5931B 18 17.1 18.9 12 20.8 650 0.25 1 13.7 1N5932B 20 19 21 14 18.7 650 0.25 1 15.2 1N5933B 22 20.9 23.1 18 17 650 0.25 1 16.7 1N5934B 24 22.8 25.2 19 15.6 700 0.25 1 18.2 1N5935B 27 25.65 28.35 23 13.9 700 0.25 1 20.6 1N5936B 30 28.5 31.5 26 12.5 750 0.25 1 22.8 1N5937B 33 31.35 34.65 33 11.4 800 0.25 1 25.1 1N5938B 36 34.2 37.8 38 10.4 850 0.25 1 27.4 1N5939B 39 37.05 40.95 45 9.6 900 0.25 1 29.7 1N5940B 43 40.85 45.15 53 8.7 950 0.25 1 32.7 1N5941B 47 44.65 49.35 67 8 1000 0.25 1 35.8 1N5942B 51 48.45 53.55 70 7.3 1100 0.25 1 38.8 STAD-FEB.10.2009 1 Z ZT @ IZT Z ZK @ IZK PAGE . 2 2.5 2 1.5 1 0.5 0 0 20 40 60 80 100 120 140 150 180  vz, TEMPERATURE COEFICENT (mV/ OC) MAXIMUM POWER DISSIPATION, Watts 1N5921B~1N5942B 10 V @I Z ZT 8 6 4 2 0 -2 -4 2 200 V @I Z ZT 70 50 30 20 10 20 10 12 Fig.2 T emperature coeeficient v.s. zener voltage,Vz(V) Zz, DYNAMIC IMPEDANCE (OHMS)  vz, TEMPERATURE COEFICENT (mV/ OC) Fig.1 Steady State Power Derating 10 8 V , ZENER VOLTAGE (VOLTS) Z O LEAD TEMPERATURE, C 100 6 4 50 30 1K 500 T = 25 O C J I (rms) =0.1 I (dc) Z Z 200 100 50 20 10 5 22V 12V 2 1 0.5 Vz, ZENER VOLTAGE (VOLTS) 6.8V 1 5 2 10 20 50 100 200 500 Iz, ZENER TEST CURRENT (mA) Fig.4 Z ener impedance v.s. zener current Fig.3 T emperature coeeficient v.s. zener voltage,Vz(V) I Z (dc)=1mA 100 70 50 30 20 10mA 10 7 5 3 2 I Z (rms)=0.1I Z (dc) 20mA 5 7 10 20 3 0 40 50 60 70 100 Vz, ZENER VOLTAGE (VOLTS) Fig.5 Z ener impedance v.s. zener voltage STAD-FEB.10.2009 1 Ppk, PEAKSURGE POWER (WATTS) Zz, DYNAMIC IMPEDANCE (OHMS) 1K 200 RECTANGULAR NONREPETITIVE WAVEFORM O T J =25 C PRIOR TO INTIAL PULSE 500 300 200 100 50 30 20 10 0.1 0.20.3 0.5 1 2 3 5 10 2030 50 100 PW, PULSE WIDTH (ms) Fig.6 Maximum Surge Power PAGE . 3 1N5921B~1N5942B 100 Iz, ZENER CURRENT (mA) Iz, ZENER CURRENT (mA) 100 50 30 20 10 5 3 2 1 0.5 0.3 0.2 0.1 0 1 2 3 4 5 6 7 8 Vz, ZENER VOLTAGE (VOLTS) Fig.7 Vz = 6.8 thru 10 Volts 9 10 50 30 20 10 5 3 2 1 0.5 0.3 0.2 0 .1 0 10 20 30 40 Vz, ZENER VOLTAGE (VOLTS) Fig.8 Vz = 12 thru 82 Volts NOTE 3. ZENER VOLTAGE (Vz) MEASUREMENT Nominal zener voltage is measured with the device function in thermal equilibrium with ambient O temperature at 25 C NOTE 4. ZENER IMPEDANCE (Zz) DERIVATION Zzt and Zzk are measured by dividing the ac voltage drop across the device by the accurrent applied. The specified limits are for Iz(ac) = 0.1 Iz, (dc) with the ac freqency = 60Hz STAD-FEB.10.2009 1 PAGE . 4 1N5921B~1N5942B Part No_packing code_Version 1N5921B_AY_00001 1N5921B_AY_10001 1N5921B_B0_00001 1N5921B_B0_10001 1N5921B_R2_00001 1N5921B_R2_10001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING STAD-FEB.10.2009 1 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 1N5921B~1N5942B Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. STAD-FEB.10.2009 1 PAGE . 6