1SMB2EZ30_R1_00001

1SMB2EZ6.8~1SMB2EZ51 GLASS PASSIVATED JUNCTION SILICON ZENER DIODES VOLTAGE 6.8 to 51 Volt POWER 2 Watt FEATURES • Glass passivated iunction • Low inductance • Typical ID less than 1.0µA above 11V • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard MECHANICAL DATA • Case: JEDEC DO-214AA, Molded plastic over passivated junction • Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity: Color band denotes cathode end • Standard packing: 12mm tape (E1A-481) • Weight: 0.0032 ounce, 0.092 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Parameter Peak Pulse Power Dissipation on TL=50OC (Notes A) Derate above 50 OC Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Operating Junction and Storage Temperature Range Symbol Value Units PD 2 W atts IFSM 15 Amps TJ,TSTG -55 to + 150 O C NOTES : A.Mounted on 5mm 2 (0.013mm thick) land areas. B.Measured on 8.3ms, and single half sine-wave or equivalent s quare wave, duty cycle=4 pulse s per minute maxi mum April 20,2018-REV.07 PAGE . 1 1SMB2EZ6.8~1SMB2EZ51 N o m i na l Ze ne r V o l t a g e Part Number V Z @ IZT No m. V Max. Reverse Leakage Current M a x i m u m Z e n e r Im p e d a n c e Z ZT @ IZT IZT Z ZK @ IZK IZK IR @VR M i n. V M a x. V Ω mA Ω mA μA V Marking C ode 2.0 watt Zener Diodes 1SMB2EZ6.8 6.8 6.46 7.14 2 73.5 700 1 5 4 2006 1SMB2EZ7.5 7.5 7.13 7.88 2 66.5 700 0.5 5 5 2007 1SMB2EZ8.2 8.2 7.79 8.61 2 61 700 0.5 5 6 2008 1SMB2EZ8.7 8.7 8.27 9.14 2 58 700 0.5 4 6.6 20A 8 1SMB2EZ9.1 9.1 8.65 9.56 3 55 700 0.5 3 7 2009 1SMB2EZ10 10 9.5 10.5 4 50 700 0.25 3 7.6 2010 1SMB2EZ11 11 10.45 11.55 4 45.5 700 0.25 1 8.4 2011 1SMB2EZ12 12 11.4 12.6 5 41.5 700 0.25 1 9.1 2012 1SMB2EZ13 13 12.35 13.65 5 38.5 700 0.25 0.5 9.9 2013 1SMB2EZ14 14 13.3 14.7 6 35.7 700 0.25 0.5 10.6 2014 1SMB2EZ15 15 14.25 15.75 7 33.4 700 0.25 0.5 11.4 2015 1SMB2EZ16 16 15.2 16.8 8 31.2 700 0.25 0.5 12.2 2016 1SMB2EZ17 17 16.15 17.85 9 29.4 750 0.25 0.5 13 2017 1SMB2EZ18 18 17.1 18.9 10 27.8 750 0.25 0.5 13.7 2018 1SMB2EZ19 19 18.05 19.95 11 26.3 750 0.25 0.5 14.4 2019 1SMB2EZ20 20 19 21 11 25 750 0.25 0.5 15.2 2020 1SMB2EZ22 22 20.9 23.1 12 22.8 750 0.25 0.5 16.7 2022 1SMB2EZ24 24 22.8 25.2 13 20.8 750 0.25 0.5 18.2 2024 1SMB2EZ25 25 23.75 26.25 14 20 750 0.25 0.5 19 2025 1SMB2EZ27 27 25.65 28.35 18 18.5 750 0.25 0.5 20.6 2027 1SMB2EZ28 28 26.6 29.4 18 17 750 0.25 0.5 21.3 2028 1SMB2EZ30 30 28.5 31.5 20 16.6 1000 0.25 0.5 22.5 2030 1SMB2EZ33 33 31.35 34.65 23 15.1 1000 0.25 0.5 25.1 2033 1SMB2EZ36 36 34.2 37.8 25 13.9 1000 0.25 0.5 27.4 2036 1SMB2EZ39 39 37.05 40.95 30 12.8 1000 0.25 0.5 29.7 2039 1SMB2EZ43 43 40.85 45.15 35 11.6 1500 0.25 0.5 32.7 2043 1SMB2EZ47 47 44.65 49.35 40 10.6 1500 0.25 0.5 35.8 2047 1SMB2EZ51 51 48.45 53.55 48 9.8 1500 0.25 0.5 38.8 2051 April 20,2018-REV.07 PAGE . 2 1SMB2EZ6.8~1SMB2EZ51 April 20,2018-REV.07 PAGE . 3 1SMB2EZ6.8~1SMB2EZ51 RANGE 4 6 5 7 8 April 20,2018-REV.07 PAGE . 4 1SMB2EZ6.8~1SMB2EZ51 MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.8K per 7" plastic Reel April 20,2018-REV.07 PAGE . 5 1SMB2EZ6.8~1SMB2EZ51 Part No_packing code_Version 1SMB2EZ6.8_R1_00001 1SMB2EZ6.8_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING April 20,2018-REV.07 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 6 1SMB2EZ6.8~1SMB2EZ51 Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. April 20,2018-REV.07 PAGE . 7