1SMB3EZ43_R1_00001

1SMB3EZ5.6~1SMB3EZ51 GLASS PASSIVATED JUNCTION SILICON ZENER DIODES VOLTAGE 5.6 to 51 Volt POWER 3 Watt FEATURES • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard MECHANICAL DATA • Case: JEDEC DO-214AA, Molded plastic over passivated junction • Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity: Color band denotes cathode end • Standard packing: 12mm tape (E1A-481) • Weight: 0.0032 ounce, 0.092 gram 1 Cathode 2 Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Parameter Steady State Power Dissipation at T L=75 OC (Note 1) Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Operating Junction and Storage Temperature Range Symbol Value Units PD 3 W IFSM 15 A TJ,TSTG -55 to + 150 O C NOTE : 1. Mounted on infinite heatsink. April 20,2018-REV.12 PAGE . 1 1SMB3EZ5.6~1SMB3EZ51 Nominal Z ener Volt age Part Number VZ @ I ZT Max Reverse Leakage Current M aximum Zener I mpedance ZZT I ZT ZZK I ZK I R @VR Marking Code Nom. V M in. V M ax. V Ω mA Ω mA μA V 1SMB3EZ5.6 5.6 5.32 5.88 2 134 700 1 5 3 5V6B 1SMB3EZ6.2 6.2 5.89 6.51 2 120 700 1 5 4 6V2B 1SMB3EZ6.8 6.8 6.46 7.14 2 110 700 1 5 4 6V8B 1SMB3EZ7.5 7.5 7.13 7.88 2 100 700 0.5 5 5 7V5B 1SMB3EZ8.2 8.2 7.79 8.61 2 91 700 0.5 5 6 8V2B 1SMB3EZ8.7 8.7 8.27 9.14 2 85 700 0.5 4 6.6 8V7B 1SMB3EZ9.1 9.1 8.65 9.56 3 82 700 0.5 3 7 9V1B 1SMB3EZ10 10 9.5 10.5 4 75 700 0.25 3 7.6 10B 1SMB3EZ11 11 10.45 11.55 4 68 700 0.25 1 8.4 11B 1SMB3EZ12 12 11.4 12.6 5 63 700 0.25 1 9.1 12B 1SMB3EZ13 13 12.35 13.65 5 58 700 0.25 0.5 9.9 13B 1SMB3EZ14 14 13.3 14.7 5 53 700 0.25 0.5 10.6 14B 1SMB3EZ15 15 14.25 15.75 6 50 700 0.25 0.5 11.4 15B 1SMB3EZ16 16 15.2 16.8 6 47 700 0.25 0.5 12.2 16B 1SMB3EZ17 17 16.15 17.85 6 44 750 0.25 0.5 13 17B 1SMB3EZ18 18 17.1 18.9 6 42 750 0.25 0.5 13.7 18B 1SMB3EZ19 19 18.05 19.95 7 40 750 0.25 0.5 14.4 19B 1SMB3EZ20 20 19 21 7 37 750 0.25 0.5 15.2 20B 1SMB3EZ22 22 20.9 23.1 8 34 750 0.25 0.5 16.7 22B 1SMB3EZ24 24 22.8 25.2 9 31 750 0.25 0.5 18.2 24B 1SMB3EZ25 25 23.75 26.25 10 30 750 0.25 0.5 19 25B 1SMB3EZ27 27 25.65 28.35 10 28 750 0.25 0.5 20.6 27B 1SMB3EZ28 28 26.6 29.4 12 27 750 0.25 0.5 21.3 28B 1SMB3EZ30 30 28.5 31.5 16 25 1000 0.25 0.5 22.5 30B 1SMB3EZ33 33 31.35 34.65 20 23 1000 0.25 0.5 25.1 33B 1SMB3EZ36 36 34.2 37.8 22 21 1000 0.25 0.5 27.4 36B 1SMB3EZ39 39 37.05 40.95 28 19 1000 0.25 0.5 29.7 39B 1SMB3EZ43 43 40.85 45.15 33 17 1500 0.25 0.5 32.7 43B 1SMB3EZ47 47 44.65 49.35 38 16 1500 0.25 0.5 35.8 47B 1SMB3EZ51 51 48.45 53.55 45 15 1500 0.25 0.5 38.8 51B April 20,2018-REV.12 PAGE . 2 1SMB3EZ5.6~1SMB3EZ51 2 1 0 0 25 50 75 100 125 1000 CJ, Junction Capacitance (pF) PD, Power Dissipation (W) 3 150 TL, Lead Temperature (°C) 6.2V 5.6V 100 1000 5.6V 10 IZ, Zener Current (mA) 100 IR, Reverse Current (μA) 5 VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance Fig.1 Steady-State Power Derating Curve 6.2V 1 0.1 0.01 0.5 TJ=25°C 0 1 2 3 4 5 6 7 5.6V 6.2V 100 10 1 0.1 TJ=25°C 2 3 VR, Reverse Voltage (V) 6 7 8 10 8 (mV/°C)@ IZT 20V 30V 39V qVZ,Temperature Coefficient IZ,Zener Current (mA) 5 Fig.4 Typical Zener Characteristics Fig.3 Typical Leakage Characteristics o T J=25 C VZ, Zener Voltage(V) Fig.5 Typical Zener Characteristics 6 4 2 0 RANGE 3 4 5 6 7 8 9 10 11 12 VZ, Zener Voltage(V)@ IZT Voltage(V) Fig.6 Units 5.6 To 12 Volts (mV/°C)@ IZT qVZ,Temperature Coefficient 4 VZ, Zener Voltage (V) RANGE VZ, Zener Voltage(V)@ IZT Voltage(V) Fig.7 Units 10 To 51 Volts April 20,2018-REV.12 PAGE . 3 1SMB3EZ5.6~1SMB3EZ51 MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.8K per 7" plastic Reel April 20,2018-REV.12 PAGE . 4 1SMB3EZ5.6~1SMB3EZ51 Part No_packing code_Version 1SMB3EZ5.6_R1_00001 1SMB3EZ5.6_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING April 20,2018-REV.12 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 1SMB3EZ5.6~1SMB3EZ51 Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. April 20,2018-REV.12 PAGE . 6