1SMB5938_R1_00001

1SMB5921~1SMB5942 SURFACE MOUNT SILICON ZENER DIODE VOLTAGE 6.8 to 51 Volt POWER 1.5 Watt FEATURES • For surface mounted applications in order to optimize board space. • Low inductance • Typical IR less than 1µA above 12V • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard MECHANICAL DATA • Case: JEDEC DO-214AA,Molded plastic over passivated junction. • Terminals: Solder plated,solderable per MIL-STD-750, Method 2026 • Polarity: Color band denotes cathode end • Standard Packaging: 12mm tape (EIA-481) • Weight: 0.0032 ounce, 0.092 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Parameter Peak Pulse Power Dissipation on TL=75OC (Notes A) Derate above 75 OC Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Operating Junction and Storage Temperature Range Symbol Value Units PD 1.5 Watts IFSM 10 Amps TJ,TSTG -55 to + 150 O C NOTES : A.Mounted on 5mm2 (0.013mm thick) land areas. B.Measured on 8.3ms, and single half sine-wave or equivalent square wave ,duty cycle=4 pulses per minute maximum. April 20,2018-REV.11 PAGE . 1 1SMB5921~1SMB5942 Nominal Zener Voltage Part Number Max. Reverse Leakage Current M aximum Zener I mpedance VZ @ I ZT Z ZT @ I Z T ZZK @ I ZK IR VR M ar k ing Code Nom V M inV M ax V Ω mA Ω mA μA V 1SMB5921 6.8 6.46 7.14 3 55.1 200 1 5 5.2 921B 1SMB5922 7.5 7.13 7.88 3 50 400 0.5 5 6 922B 1SMB5923 8.2 7.79 8.61 4 45.7 400 0.5 5 6.5 923B 1SMB5924 9.1 8.65 9.56 4 41.2 500 0.5 5 7 924B 1SMB5925 10 9.5 10.5 5 37.5 500 0.25 5 8 925B 1SMB5926 11 10.45 11.55 6 34.1 550 0.25 1 8.4 926B 1SMB5927 12 11.4 12.6 7 31.2 550 0.25 1 9.1 927B 1SMB5928 13 12.35 13.65 7 28.8 550 0.25 1 9.9 928B 1SMB5929 15 14.25 15.75 9 25 600 0.25 1 11.4 929B 1SMB5930 16 15.2 16.8 10 23.4 600 0.25 1 12.2 930B 1SMB5931 18 17.1 18.9 12 20.8 650 0.25 1 13.7 931B 1SMB5932 20 19 21 14 18.7 650 0.25 1 15.2 932B 1SMB5933 22 20.9 23.1 18 17 650 0.25 1 16.7 933B 1SMB5934 24 22.8 25.2 19 15.6 700 0.25 1 18.2 934B 1SMB5935 27 25.65 28.35 23 13.9 700 0.25 1 20.6 935B 1SMB5936 30 28.5 31.5 26 12.5 750 0.25 1 22.8 936B 1SMB5937 33 31.35 34.65 33 11.4 800 0.25 1 25.1 937B 1SMB5938 36 34.2 37.8 38 10.4 850 0.25 1 27.4 938B 1SMB5939 39 37.05 40.95 45 9.6 900 0.25 1 29.7 939B 1SMB5940 43 40.85 45.15 53 8.7 950 0.25 1 32.7 940B 1SMB5941 47 44.65 49.35 67 8 1000 0.25 1 35.8 941B 1SMB5942 51 48.45 53.55 70 7.3 1100 0.25 1 38.8 942B April 20,2018-REV.11 PAGE . 2 2.5 2 1.5 1 0.5 0 0 20 40 60 80 100 120 140 150 180 qvz, TEMPERATURE COEFICENT (mV/ OC) MAXIMUM POWER DISSIPATION, Watts 1SMB5921~1SMB5942 10 V @I Z ZT 8 6 4 2 0 -2 -4 2 200 V @I Z ZT 70 50 30 20 10 20 30 50 70 10 12 Fig.2 Zener Voltage - to 12 volts 100 200 Zz, DYNAMIC IMPEDANCE (OHMS) qvz, TEMPERATURE COEFICENT (mV/ OC) Fig.1 Steady State Power Derating 10 8 V , ZENER VOLTAGE (VOLTS) Z O LEAD TEMPERATURE, C 100 6 4 1K 500 VZ=150V 200 100 50 T = 25 O C J I (rms) =0.1 I (dc) Z Z 62V 20 10 5 22V 12V 2 1 0.5 Vz, ZENER VOLTAGE (VOLTS) 6.8V 1 5 2 10 20 50 100 200 500 Iz, ZENER TEST CURRENT (mA) Fig.3 Zener Voltage - 14 to 200 Volts Fig.4 Effect of Zener Current I Z (dc)=1mA 100 70 50 30 20 10mA 10 7 5 3 2 I Z (rms)=0.1I Z (dc) 20mA 5 7 10 20 3 0 40 50 60 70 Vz, ZENER VOLTAGE (VOLTS) Fig.5 Effect of Zener Voltage April 20,2018-REV.11 100 Ppk, PEAKSURGE POWER (WATTS) Zz, DYNAMIC IMPEDANCE (OHMS) 1K 200 RECTANGULAR NONREPETITIVE WAVEFORM O T J =25 C PRIOR TO INTIAL PULSE 500 300 200 100 50 30 20 10 0.1 0.20.3 0.5 1 2 3 5 10 20 30 50 100 PW, PULSE WIDTH (ms) Fig.6 Maximum Surge Power PAGE . 3 1SMB5921~1SMB5942 100 Iz, ZENER CURRENT (mA) Iz, ZENER CURRENT (mA) 100 50 30 20 10 5 3 2 1 0.5 0.3 0.2 0.1 0 1 2 3 4 5 6 7 8 Vz, ZENER VOLTAGE (VOLTS) Fig.7 Vz = 6.8 thru 10 Volts 9 10 50 30 20 10 5 3 2 1 0.5 0.3 0.2 0.1 0 10 20 30 40 50 60 70 80 90 100 Vz, ZENER VOLTAGE (VOLTS) Fig.8 Vz = 12 thru 82 Volts NOTE 3. ZENER VOLTAGE (Vz) MEASUREMENT Nominal zener voltage is measured with the device function in thermal equilibrium with ambient O temperature at 25 C NOTE 4. ZENER IMPEDANCE (Zz) DERIVATION Zzt and Zzk are measured by dividing the ac voltage drop across the device by the accurrent applied. The specified limits are for Iz(ac) = 0.1 Iz, (dc) with the ac freqency = 60Hz April 20,2018-REV.11 PAGE . 4 1SMB5921~1SMB5942 MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.8K per 7" plastic Reel April 20,2018-REV.11 PAGE . 5 1SMB5921~1SMB5942 Part No_packing code_Version 1SMB5921_R1_00001 1SMB5921_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING April 20,2018-REV.11 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 6 1SMB5921~1SMB5942 Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. April 20,2018-REV.11 PAGE . 7