1SMC5344_R1_00001

1SMC5338~1SMC5369 SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 5.1 ~ 51 Volt CURRENT 5 Watt FEATURES • For surface mounted applications in order to optimize board space • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard MECHANICAL DATA • Case: JEDEC DO-214AB,Molded plastic over passivated junction. • Terminals: Solder plated,solderable per MIL-STD-750, Method 2026 • Polarity: Color band denotes cathode end • Standard Packaging: 16mm tape (EIA-481) • Weight: 0.0082 ounce, 0.2325 gram 1 Cathode 2 Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Parameter DC Power Dissipation on TL=75OC ,Measure at Zero Lead Length Derate above 75OC Typical thermal resistance (Note 1) Operating Junction and Storage Temperature Range Symbol Value Unit PD 5 Watts R θ JA 100 TJ , TSTG -55 to +150 O C/W O C NOTES : 1.Mounted on a FR4 PCB, single-sided copper, mini pad. April 23,2018-REV.14 PAGE . 1 1SMC5338~1SMC5369 Nominal Zener Voltage Part Number 1SMC5338 Max. Reverse Leakage Current Max. Zener Impedance VZ @ I ZT ZZT @ I ZT Z ZK @ I ZK I R @ VR Marking Code Nom. V M in. V M ax. V Ω mA Ω mA μA V 5.1 4.85 5.36 2 240 400 1 10 1.0 338B 1SMC5339 5.6 5.32 5.88 1 220 400 1 10 2.0 339B 1SMC5340 6.0 5.70 6.30 1 200 300 1 10 3.0 340B 1SMC5341 6.2 5.89 6.51 1 200 200 1 10 3.0 341B 1SMC5342 6.8 6.46 7.14 1 175 200 1 10 5.2 342B 1SMC5343 7.5 7.13 7.88 2 175 200 1 10 5.7 343B 1SMC5344 8.2 7.79 8.61 2 150 200 1 10 6.2 344B 1SMC5345 8.7 8.27 9.14 2 150 200 1 10 6.6 345B 1SMC5346 9.1 8.65 9.56 2 150 150 1 7.5 6.9 346B 1SMC5347 10 9.5 10.5 2 125 125 1 5 7.6 347B 1SMC5348 11 10.45 11.55 3 125 125 1 5 8.4 348B 1SMC5349 12 11.4 12.6 3 100 125 1 2 9.1 349B 1SMC5350 13 12.35 13.65 3 100 100 1 1 9.9 350B 1SMC5351 14 13.3 14.7 3 100 75 1 1 10.6 351B 1SMC5352 15 14.25 15.75 3 75 75 1 1 11.5 352B 1SMC5353 16 15.2 16.8 3 75 75 1 1 12.2 353B 1SMC5354 17 16.15 17.85 3 70 75 1 0.5 12.9 354B 1SMC5355 18 17.1 18.9 3 65 75 1 0.5 13.7 355B 1SMC5356 19 18.05 19.95 3 65 75 1 0.5 14.4 356B 1SMC5357 20 19 21 3 65 75 1 0.5 15.2 357B 1SMC5358 22 20.9 23.1 4 50 75 1 0.5 16.7 358B 1SMC5359 24 22.8 25.2 4 50 100 1 0.5 18.2 359B 1SMC5360 25 23.75 26.25 4 50 110 1 0.5 19 360B 1SMC5361 27 25.65 28.35 5 50 120 1 0.5 20.6 361B 1SMC5362 28 26.6 29.4 6 50 130 1 0.5 21.2 362B 1SMC5363 30 28.5 31.5 8 40 140 1 0.5 22.8 363B 1SMC5364 33 31.35 34.65 10 40 150 1 0.5 25.1 364B 1SMC5365 36 34.2 37.8 11 30 160 1 0.5 27.4 365B 1SMC5366 39 37.05 40.95 14 30 170 1 0.5 29.7 366B 1SMC5367 43 40.85 45.15 20 30 190 1 0.5 32.7 367B 1SMC5368 47 44.65 49.35 25 25 210 1 0.5 35.8 368B 1SMC5369 51 48.45 53.55 27 25 230 1 0.5 38.8 369B April 23,2018-REV.14 PAGE . 2 1SMC5338~1SMC5369 RATING AND CHARACTERISTIC CURVES 400 QVZ,T EMPE RATU RE o COEF FICIE NT(m A/ C@IZ T) PD,MAXIMUM POWER DISSPATION(WATTS) 8 6 4 2 0 0 30 60 90 120 300 200 100 50 30 20 RANGE 10 5 0 150 20 60 80 100 120 140 160 180 200 TL,LEAD TEMPERATURE( C) VZ,ZENER VOLTAGE@IZT(VOLTS) Fig.1-POWER TEMPERATURE DERATING CURVE Fig.2-TEMPERATURE COEFFICIENT-RANGE o 40 40 PW=1ms* IR,PEAK SURGE CURRENT( AMPS) 20 30 20 MCUNTE ON 8.0mm COPPER PADS TO EACH TERMINAL 10 0 2 PW=8.3ms* 10 4 2 1 PW=1000ms* 0.4 0.2 SINE/SQUARE WAVE PW=100ms* 0.1 0 0.2 0.4 0.6 0.8 1 3 4 6 8 10 20 30 40 60 80100 200 L,LEAD LENGTH TO HEAT SINK(INCH) NOMINAL VZ(V) Fig.3-TYPICAL THERMAL RESISTANCE Fig.4-MAXIMUM NON-REPETITIVE SURGE CURRENT VERSUS NOMINAL ZENER VOLTAGE QJL(t,D),TRA NSIENT THERMAL RESISTANCE JUNCTION-T O-LEAD( oC/W) JL,JUNCTION-TO-LEAD o THERMAL RESISTANCE( C/W) 40 30 20 10 7 5 3 2 1 0.7 0.5 0.3 0.0001 D=0.5 0.2 PPK 0.1 t1 0.05 t2 0.02 NOTE BELOW 0.1 SECOND, THERMAL RESPONSE CURVE IS APPLICABLE TO ANY LEAD LENGTH(L) 0.01 D=0 0.0002 0.0005 0.001 0.002 0.005 0.01 0.02 0.05 DUTY CYCLE,D=t1/t2 SINGLE PULSE r TJL= Q JL(t)PPK REPETITIVE PULSES r TJL= Q JL(t,D)PPK 0.1 0.2 0.5 1 2 5 10 TIME (SECONDS) Fig.5-TYPICAL THERMAL RESPONSE April 23,2018-REV.14 PAGE . 3 1SMC5338~1SMC5369 1000 900 800 700 600 500 400 300 200 100 0 April 23,2018-REV.14 T= 25°C 0 2 4 6 8 PAGE . 4 1SMC5338~1SMC5369 MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.8K per 7" plastic Reel April 23,2018-REV.14 PAGE . 5 1SMC5338~1SMC5369 Part No_packing code_Version 1SMC5338_R1_00001 1SMC5338_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING April 23,2018-REV.14 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 6 1SMC5338~1SMC5369 Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. April 23,2018-REV.14 PAGE . 7