3EZ39_R2_00001

3EZ6.8~3EZ51 SILICON ZENER DIODES VOLTAGE 6.8 to 51 Volt POWER 3 Watt FEATURES • Low inductance 1.0(25.4)MIN. 0.034(0.86) 0.028(0.71) • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals 0.300(7.6) 0.230(5.8) • Lead free in compliance with EU RoHS 2011/65/EU directive MECHANICAL DATA • Case: JEDEC DO-15, Molded plastic • Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 0.140(3.6) 0.104(2.6) 1.0(25.4)MIN. • Polarity: Color band denotes cathode end • Standard packing: 52mm tape • Weight: 0.014 ounce, 0.0397 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Parameter Peak Pulse Power Dissipation on TL=50OC (Notes A) Derate above 50OC Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Operating Junction and Storage Temperature Range Symbol Value Units PD 3 Watts IFSM 15 Amps TJ,TSTG -55 to + 150 O C NOTES : A.Mounted on 5mm 2 (0.013mm thick) land areas. B.Measured on 8.3ms, and single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum December 10,2014-REV.03 PAGE . 1 3EZ6.8~3EZ51 N o m i na l Ze ne r V o l t a g e Part Number V Z @ IZT No m. V Max Reverse Leakage Current M a x i m u m Z e n e r Im p e d a n c e Z ZT @ IZT IZT Z ZK @ IZK IZK IR @VR M i n. V M a x. V Ω mA Ω mA μA V Marking C ode 3.0 Watt ZENER 3EZ6.8 6.8 6.46 7.14 2 110 700 1 5 4 3EZ6.8 3EZ7.5 7.5 7.13 7.88 2 100 700 0.5 5 5 3EZ7.5 3EZ8.2 8.2 7.79 8.61 2 91 700 0.5 5 6 3EZ8.2 3EZ8.7 8.7 8.27 9.14 2 85 700 0.5 4 6.6 3EZ8.7 3EZ9.1 9.1 8.65 9.56 3 82 700 0.5 3 7 3EZ9.1 3EZ10 10 9.5 10.5 4 75 700 0.25 3 7.6 3EZ10 3EZ11 11 10.45 11.55 4 68 700 0.25 1 8.4 3EZ11 3EZ12 12 11.4 12.6 5 63 700 0.25 1 9.1 3EZ12 3EZ13 13 12.35 13.65 5 58 700 0.25 0.5 9.9 3EZ13 3EZ14 14 13.3 14.7 5 53 700 0.25 0.5 10.6 3EZ14 3EZ15 15 14.25 15.75 6 50 700 0.25 0.5 11.4 3EZ15 3EZ16 16 15.2 16.8 6 47 700 0.25 0.5 12.2 3EZ16 3EZ17 17 16.15 17.85 6 44 750 0.25 0.5 13 3EZ17 3EZ18 18 17.1 18.9 6 42 750 0.25 0.5 13.7 3EZ18 3EZ19 19 18.05 19.95 7 40 750 0.25 0.5 14.4 3EZ19 3EZ20 20 19 21 7 37 750 0.25 0.5 15.2 3EZ20 3EZ22 22 20.9 23.1 8 34 750 0.25 0.5 16.7 3EZ22 3EZ24 24 22.8 25.2 9 31 750 0.25 0.5 18.2 3EZ24 3EZ25 25 23.75 26.25 10 30 750 0.25 0.5 19 3EZ25 3EZ27 27 25.65 28.35 10 28 750 0.25 0.5 20.6 3EZ27 3EZ28 28 26.6 29.4 12 27 750 0.25 0.5 21.3 3EZ28 3EZ30 30 28.5 31.5 16 25 1000 0.25 0.5 22.5 3EZ30 3EZ33 33 31.35 34.65 20 23 1000 0.25 0.5 25.1 3EZ33 3EZ36 36 34.2 37.8 22 21 1000 0.25 0.5 27.4 3EZ36 3EZ39 39 37.05 40.95 28 19 1000 0.25 0.5 29.7 3EZ39 3EZ43 43 40.85 45.15 33 17 1500 0.25 0.5 32.7 3EZ43 3EZ47 47 44.65 49.35 38 16 1500 0.25 0.5 35.8 3EZ47 3EZ51 51 48.45 53.55 45 15 1500 0.25 0.5 38.8 3EZ51 December 10,2014-REV.03 PAGE . 2 3EZ6.8~3EZ51 December 10,2014-REV.03 PAGE . 3 q Z O V , JUNCTION - LEAD THERMAL RESISTANCE ( C/W) 3EZ6.8~3EZ51 80 70 60 50 40 30 20 PRIMARY PATH OF CONEUCTION IS THROUGH THE CATHODE LEAD 10 0 0 1/8 4/1 3/8 1/2 5/8 3/4 7/8 1 L, LEAD LENGTH TO HEAT SINK (INCH) FIGURE 4. TYPLCAL THERMAL RESISTANCE December 10,2014-REV.03 PAGE . 4 3EZ6.8~3EZ51 Part No_packing code_Version 3EZ6.8_AY_00001 3EZ6.8_AY_10001 3EZ6.8_B0_00001 3EZ6.8_B0_10001 3EZ6.8_R2_00001 3EZ6.8_R2_10001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING December 10,2014-REV.03 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 3EZ6.8~3EZ51 Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. December 10,2014-REV.03 PAGE . 6