BAS40S-AU_R1_000A1

PBAS40-AU~BAS40S-AU SURFACE MOUNT SCHOTTKY DIODES Voltage 40 V Current 0.2 A SOT-23 Features  Fast switching speed  Surface mount package ideally suited for automatic insertion electrical identical standard JEDEC  High conductor  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard  AEC-Q101 qualified SINGLE Mechanical Data  Case: SOT-23 Package  Terminals: Solderable per MIL-STD-750, Method 2026  Approx. Weight: 0.0003 ounces, 0.0084 grams COMMON ANODE BAS40-AU BAS40A-AU COMMON CATHODE SERIES BAS40C-AU BAS40S-AU o Maximum Ratings and Thermal Characteristics (TA = 25 C unless otherwise noted) PARAMETER SYMBOL LIMIT UNITS Maximum Repetitive Peak Reverse Voltage VRRM 40 V Maximum Rms Voltage VRMS 28 V Maximum Dc Blocking Voltage VDC 40 V Maximum Average Forward Current Peak Forward Surge Current : 1 s Single Half SineWave Superimposed On Rated Load IF(AV) 0.2 A IFSM 0.6 A CJ 5 pF Maximum Junction Capacitance Measured at 1 MHZ And Applied VR = 0 V Typical Thermal Resistance Operating Junction Temperature Range Storage Temperature Range December 14,2018-REV.04 RθJA (1) TJ TSTG 350 o C/W -55~150 o -55~150 o C C Page 1 PBAS40-AU~BAS40S-AU o Electrical Characteristics (TA = 25 C unless otherwise noted) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. IF = 1 mA, TJ = 25 C - - 0.38 o - - 0.50 o - - 1 o IF = 1 mA, TJ = 125 C - 0.21 - o - 0.35 - o - 0.55 - - - 0.5 VR = 40 V, TJ = 25 C - - 1 o - 22 - o IF = 10 mA, TJ = 25 C Forward Voltage VF IF = 40 mA, TJ = 25 C IF = 10 mA, TJ = 125 C IF = 40 mA, TJ = 125 C o VR = 30 V, TJ = 25 C Reverse Current IR (2) o VR = 40 V, TJ = 125 C UNITS V uA NOTES: 1. Mounted on a FR4 PCB, single-sided copper, mini pad. 2. Short duration pulse test used to minimize self-heating effect December 14,2018-REV.04 Page 2 PBAS40-AU~BAS40S-AU TYPICAL CHARACTERISTIC CURVES CJ, Junction Capacitance (pF) IF, Forward Current (mA) 240 200 160 120 80 40 0 0 25 50 75 100 125 10 1 0 0 150 12 TA, Ambient Temperature (°C) Fig.1 Forward Current Derating Curve 10 TJ = 125°C TJ = 75°C 0.1 0.01 TJ = 25°C 60 TJ = 150°C 100 TJ = 125°C 10 TJ = 75°C TJ = 25°C 1 0.001 20 40 60 80 100 Percent of Rated Reverse Voltage (%) Fig.3 Typical Reverse Characteristics Percent of Reverse Voltage (%) 48 1000 TJ = 150°C 1 36 Fig.2 Typical Junction Capacitance IF, Forward Current (mA) IR, Reverse Current (uA) 100 24 VR, Reverse Bias Voltage (V) 0 0.2 0.4 0.6 0.8 1 1.2 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics 120 100 80 60 40 20 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.5 Operating Temperature Derating Curve December 14,2018-REV.04 Page 3 PBAS40-AU~BAS40S-AU Part No Packing Code Version Part No Packing Code Package Type Packing Type Marking Version BAS40-AU_R1_000A1 SOT-23 3K / 7" Reel S40 Halogen free BAS40A-AU_R1_000A1 SOT-23 3K / 7" Reel S42 Halogen free BAS40C-AU_R1_000A1 SOT-23 3K / 7" Reel S43 Halogen free BAS40S-AU_R1_000A1 SOT-23 3K / 7" Reel S44 Halogen free Packaging Information & Mounting Pad Layout Unit: inch(mm) SOT-23 Pad Layout Unit: inch(mm) 0.006(0.15)MIN. SOT-23 Dimension 0.120(3.04) 0.110(2.80) 0.056(1.40) 0.047(1.20) 0.008(0.20) 0.079(2.00) 0.003(0.08) 0.070(1.80) 0.004(0.10) 0.044(1.10) 0.000(0.00) 0.035(0.90) 0.020(0.50) 0.013(0.35) December 14,2018-REV.04 Page 4 PBAS40-AU~BAS40S-AU Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. December 14,2018-REV.04 Page 5