BC817-16W_R1_00001

BC817-16W SERIES NPN GENERAL PURPOSE TRANSISTORS 45 Volt VOLTAGE POWER 300 mW FEATURES • General purpose amplifier applications • NPN epitaxial silicon, planar design • Collector current IC = 500mA • Lead free in compliance with EU RoHS 2011/65/EU directive • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA • Case : SOT-323, Plastic • Terminals : Solderable per MIL-STD-750, Method 2026 • Approx. Weight : 0.0001 ounce, 0.005 gram • Device Marking : BC817-16W : 8S BC817-25W : 8V BC817-40W : 8W MAXIMUM RATINGS PARAMETER SYMBOL Value UNIT Collector-Emitter Voltage VCEO 45 V Collector-Base Voltage VCBO 50 V Emitter-Base Voltage VEBO 5 V IC 500 mA Peak Collector Current ICM 1000 mA Base Current - Peak IBM 200 mA PTOT 300 mW TJ , TSTG -55 to +150 oC Collector Current - Continuous Total Power Dissipation ( NOTE ) Junction and Storage Temperature Range THERMAL CHARACTERISTICS PARAMETER Thermal Resistance Junction to Ambient ( NOTE ) SYMBOL Value R θJA 420 UNIT oC /W NOTE : Transistor mounted on FR-5 board minimum pad mounting conditions. October 3,2014-REV.04 PAGE . 1 BC817-16W SERIES ELECTRICAL CHARACTERISTICS ( TJ=25oC,unless otherwise notes ) PARAMETER SYMBOL MIN. TYP. MAX. UNIT Collector-Emitter Breakdown Voltage ( Ic=10mA, IB=0 ) V(BR)CEO 45 - - V Collector-Base Breakdown Voltage ( V EB=0V, Ic=10μA ) V(BR)CBO 50 - - V Emitter-Base Breakdown Voltage ( IE=1μA, Ic=0 ) V(BR)EBO 5.0 - - V IEBO - - 100 nA ICBO - - 100 5.0 hFE 100 160 250 - 250 400 600 - 40 - - - Emitter-Base Cutoff Current ( VEB =5V ) Collector-Base Cutoff Current ( V CB=20V, IE=0 ) TJ =25oC TJ =150oC DC Current Gain ( Ic=100mA, V CE=1V ) 1V DC Current Gain ( Ic=500mA, V CE= BC817-16W BC817-25W BC817-40W ) nA μA Collector-Emitter Saturation Voltage ( Ic=500mA, IB=50mA ) VCE(SAT) - - 0.7 V Base-Emitte Voltage ( Ic=500mA, VCE=1.0V ) VBE(ON) - - 1.2 V CCBO - 7.0 - pF fT 100 - - MHz Collector-Base Capacitance (VCB=10V, IE=0, f= 1MHz) Current Gain-Bandwidth Product ( Ic=10mA, V CE=5V, f=100MHz ) October 3,2014-REV.04 PAGE . 2 BC817-16W SERIES 10 1 IC/IB = 10 VCE ( SAT ) (V) VBE ( SAT ) (V) IC/IB = 10 TJ = 150°C 1 TJ = 150°C 0.1 TJ = 25°C TJ = 25°C 0.1 0.01 0.1 1 10 100 1000 0.1 IC, Collector Current (mA) 1 10 100 1000 IC, Collector Current (mA) Fig.1 Base-Emitter Saturation Voltage Fig.2 Collector-Emitter Saturation Voltage 600 600 VCE = 1V TJ = 75°C TJ = 150°C VCE = 1V TJ = 150°C 400 hFE hFE 400 TJ = 75°C 200 200 TJ = 25°C TJ = 25°C 0 0 0.1 1 10 100 1000 0.1 10 100 1000 IC, Collector Current (mA) IC, Collector Current (mA) Fig.3 BC817-16W：Typical DC Current Gain Fig.4 BC817-25W：Typical DC Current Gain 100 800 400 TJ = 25°C 200 f =1MHz TJ=25°C CEB VCE = 1V TJ = 150°C CCB, CCB (pF) TJ = 75°C 600 hFE 1 10 CCB 1 0 0.1 1 10 100 IC, Collector Current (mA) Fig.5 BC817-40W：DC Current Gain October 3,2014-REV.04 1000 0.1 1 10 100 VCB, VEB (V) Fig.6 Typical Capacitance PAGE . 3 BC817-16W SERIES MOUNTING PAD LAYOUT 0.073 (1.85) 0.034 (0.86) 0.026 (0.66) 0.026 (0.65) 0.026 (0.65) ORDER INFORMATION • Packing information T/R - 12K per 13" plastic Reel T/R - 3K per 7" plastic Reel October 3,2014-REV.04 PAGE . 4 BC817-16W SERIES Part No_packing code_Version BC817-16W_R1_00001 BC817-16W_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Part No. Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING October 3,2014-REV.04 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 BC817-16W SERIES Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. October 3,2014-REV.04 PAGE . 6