BD1040S_S2_00001

BD1040S SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS VOLTAGE CURRENT 40 Volt 10 Ampere FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications in order to optimize board space • Low power loss, High efficiency • High surge capacity • Lead free in compliance with EU RoHS 2011/65/EU directive • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA Case: TO-252 molded plastic Terminals: Solder plated, solderable per MIL-STD-750,Method 2026 Polarity: As marking Standard packaging: 16mm tape (EIA-481) Weight: 0.0104 ounces, 0.297grams. Marking: Part number MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Resistive or inductive load. PARAMETER SYMBOL VA L UE UNITS Maximum Recurrent Peak Reverse Voltage VRRM 40 V Maximum RMS Voltage VRMS 28 V VR 40 V Maximum DC Blocking Voltage Maximum Average Forward Current I F(AV) 10 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load I FSM 200 A Maximum Forward Voltage at 10A VF 0.7 V Maximum DC Reverse Current at Rated DC Blocking Voltage I 50 μA Typical Thermal Resistance (Note 1) Operating Junction and Storage Temperature Range R RθJ C 4 T J , T STG -55 to +150 O C/W O C Note : 1.Mounted on infinite heatsink. November 25,2014-REV.01 PAGE . 1 BD1040S IF, Forward Current (A) 12 10 8 6 4 2 0 0 25 50 75 100 125 150 CJ, Junction Capacitance (pF) RATING AND CHARACTERISTIC CURVES 10000 1000 100 10 0.1 TC, Case Temperature (°C) Fig.1 Forward Current Derating Curve 10 100 Fig.2 Typical Junction Capacitance 100 100 10 1 0.1 TJ = 150°C TJ = 125°C TJ = 75°C 0.01 TJ = 25°C 0.001 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics November 25,2014-REV.01 IF, Forward Current (A) IR,Reverse Current (mA) 1 VR, Reverse Bias Voltage (V) TJ = 150°C 10 TJ = 125°C TJ = 25°C 1 TJ = 75°C 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics PAGE . 2 BD1040S MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel November 25,2014-REV.01 PAGE . 3 BD1040S Part No_packing code_Version BD1040S_L2_00001 BD1040S_S2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Part No. Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING November 25,2014-REV.01 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 BD1040S Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. November 25,2014-REV.01 PAGE . 5