BD5100S_S2_00001

PBD540S~BD5200S SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS Voltage 40~200 V 5A Current Features  Plastic package has Underwriters Laboratory Flammability Classification 94V-O.  For surface mounted applications in order to optimize board space  Low power loss, High efficiency  High surge capacity  For use in low voltage, high frequency inverters free wheeling, and polarity protection applications  Lead free in compliance with EU RoHS 2011/65/EU directive.  Green molding compound as per IEC61249 Std..(Halogen Free) Mechanical Data  Case: TO-252 Molded plastic  Terminals: Solder plated, solderable per MIL-STD-750, Method 2026  Polarity: As marking  Approx. Weight: 0.0104 ounces, 0.297 grams  Marking: Part number o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER SYMBOL BD540S BD545S BD550S BD560S BD580S BD590S BD5100S BD5150S BD5200S UNIT Maximum repetitive peak reverse voltage VRRM 40 45 50 60 80 90 100 150 200 V Maximum rms voltage VRMS 28 31.5 35 42 56 63 70 105 140 V VR 40 45 50 60 80 90 100 150 200 V Maximum dc blocking voltage Maximum average forward rectified current IF(AV) 5 A Peak forward surge current : 8.3ms single half sine-wave superimposed on rated load IFSM 100 A Maximum forward voltage at 5A VF Maximum dc reverse current at 0.7 TJ=25 oC 0.74 0.8 0.9 V 0.05 IR rated dc blocking voltage mA TJ=100 oC Typical thermal resistance 20 RJC 5 o C/W Operating junction and storage temperature TJ,TSTG -55 to +150 -65 to +175 o C range May 9,2016­REV.03 Page 1 PBD540S~BD5200S 5.0 = 40V = 45-200V 4.0 3.0 2.0 RESISTIVE OR INDUCTIVE LOAD 1.0 0 0 20 40 60 80 100 120 140 160 PEAK FORWARD SURGE CURRENT AMPERES AVERAGE FORWARD RECTIFIED CURRENT AMPERES RATING AND CHARACTERISTIC CURVES 100 80 60 40 20 180 0 O CASE TEMPERATURE, C 10 10 FORWARD CURRENT, AMPERES 10 INSTANTANEOUS REVERSE CURRENT, mA 10 Fig.2 MAXIMUM NON-REPETITIVE SURGE CURRENT Fig.1 FORWARD CURRENT DERATING CURVE T J =100 O C 1.0 T J = 75 O C 0.1 T J = 25 O C .01 50V-60V 40V-45V 80V-100V 1.0 150-200V T A=25 OC .001 0 20 40 60 80 100 120 140 PERCENT OF INSTANTANEOUS REVERSE VOLTAGE,(%) 0.1 0.4 0.6 0.8 1.0 1.2 FORWARD VOLTAGE, VOLTS Fig.4 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC Fig.3 TYPICAL REVERSE CHARACTERISTIC Percent of Reverse Voltage (%) NO. OF CYCLE AT 60H Z 1 120 100 80 60 45~200V 40 40V 20 0 0 25 50 75 100 125 150 175 TJ, Junction Temperature (°C) Fig.5 Operating Temperature Derating Curve May 9,2016­REV.03 Page 2 PBD540S~BD5200S MOUNTING PAD LAYOUT ORDER INFORMATION ˙Packing information T/R – 3K per 13" plastic Reel May 9,2016­REV.03 Page 3 PBD540S~BD5200S Part No_packing code_Version BD540S_L2_00001 BD540S_S2_00001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D May 9,2016­REV.03 Page 4 PBD540S~BD5200S Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. May 9,2016­REV.03 Page 5