BD6100CS_L2_00001

PBD640CS~BD6200CS SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS Voltage 40~200 V 6A Current Features  Plastic package has Underwriters Laboratory Flammability Classification 94V-O.  For surface mounted applications in order to optimize board space  Low power loss, High efficiency  High surge capacity o  High temperature soldering guaranteed:260 C/10 seconds at terminals  For use in low voltage, high frequency inverters free wheeling, and polarity protection applications  Lead free in compliance with EU RoHS 2011/65/EU directive.  Green molding compound as per IEC61249 Std..(Halogen Free) Mechanical Data  Case: TO-252 Molded plastic  Terminals: Solder plated, solderable per MIL-STD-750, Method 2026  Polarity: As marking  Standard packaging: 16mm tape (EIA-481)  Approx. Weight: 0.0104 ounces, 0.297 grams  Marking: Part number o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER SYMBOL BD640CS BD645CS BD650CS BD660CS BD680CS BD690CS BD6100CS BD6150CS BD6200CS UNIT Maximum repetitive peak reverse voltage VRRM 40 45 50 60 80 90 100 150 200 V Maximum rms voltage VRMS 28 31.5 35 42 56 63 70 105 140 V VR 40 45 50 60 80 90 100 150 200 V Maximum dc blocking voltage Maximum average forward rectified current IF(AV) 6 A Peak forward surge current : 8.3ms single half sine-wave superimposed on rated load IFSM 75 A Maximum forward voltage at 3A per diode VF Maximum dc reverse current at 0.7 TJ=25 oC 0.75 0.8 0.9 V 0.05 IR rated dc blocking voltage mA TJ=100 oC Typical thermal resistance 20 RJC 5 o C/W Operating junction and storage temperature TJ,TSTG -55 to +150 -65 to +175 o C range Note: Both Bonding and Chip structure are available. November 12,2014-REV.02 Page 1 PBD640CS~BD6200CS 10.0 = 40V = 45-200V 8.0 6.0 4.0 2..0 0 0 20 40 60 80 100 120 140 180 160 PEAK FORWARDSURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT AMPERES RATING AND CHARACTERISTIC CURVES 90 75 60 45 30 15 0 1 10 O CASE TEMPERATURE, C NO. OF CYCLE AT 60Hz Fig.2-MAXIMUMNON-REPETITIVEPEAK FORWARD SURGE CURRENT Fig.1- FORWARD CURRENT DERATING CURVE 10 10 40-45V FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, mA 100 O T J =100 C 1.0 T J = 75 O C 0.1 T J = 25 O C .01 50-60V 80-100V 1.0 150-200V 0.1 .001 0 20 40 60 80 100 120 140 PERCENT OF INSTANTANEOUS REVERSE VOLTAGE,(%) Fig.3- TYPICAL REVERSE CHARACTERISTIC November 12,2014-REV.02 0.40 0.60 0.80 1.00 1.20 FORWARD VOLTAGE, VOLTS Fig.4- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC Page 2 PBD640CS~BD6200CS MOUNTING PAD LAYOUT ORDER INFORMATION ˙Packing information T/R – 3K per 13" plastic Reel November 12,2014-REV.02 Page 3 PBD640CS~BD6200CS Part No_packing code_Version BD640CS_L2_00001 BD640CS_S2_00001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D November 12,2014-REV.02 Page 4 PBD640CS~BD6200CS Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. November 12,2014-REV.02 Page 5