BR24_R1_00001

BR24~BR220 MINI SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE 40 to 200 Volt CURRENT 2 Ampere FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications in order to optimize board space • Low power loss, high efficiency • High surge capacity • Lead free in compliance with EU RoHS2.0 (2011/65/EU & 2015/865/EU directive) • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA • • • • • Case : JEDEC DO-214AC molded plastic Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Color band denotes cathode end Standard packaging : 12mm tape (EIA-481) Weight : 0.0023 ounce, 0.0679 gram 1 2 Cathode Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. PARAMETER SY MBOL BR24 BR24A BR25 BR26 BR28 BR29 Maximum Recurrent Peak Rever se Voltage V RRM 40 45 50 60 80 90 100 150 200 V Maximum RM S Voltage V RMS 28 31.5 35 42 56 63 70 105 140 V Maximum DC Blocking Voltage V DC 40 45 50 60 80 90 100 150 200 V Maximum Aver age For war d Curr ent ( See Figur e 1) I F(AV) 2 A Peak Forw ard Surge Curr ent : 8.3ms single half sine-w ave super imposed on rated load I FSM 50 A Maximum For w ard Voltage at 2A (Notes 1) VF 0.7 0.8 Maximum DC Reverse Curr ent at Rated DC Blocking Voltage T J =25 O C T J =100 O C IR 0.05 20 Typical Ther mal Resistance (Notes 2) (Notes 3) R θJL R θJA 25 150 Operating Junction and St orage Temperatur e Range T J ,T STG -55 to +150 - 55 to +175 BR210 BR215 BR220 UNITS 0.9 V mA O C/W O C NOTES : 1. Pulse Test with PW =300µsec, 1% Duty Cycle. 2. Mounted on a FR4 PCB, single-sided copper, with 100cm 2 copper pad area. 3. Mounted on a FR4 PCB, single-sided copper, mini pad. December 29,2016-REV.10 PAGE . 1 BR24~BR220 2 1.5 1 0.5 0 0 25 50 75 100 125 150 1000 CJ, Junction Capacitance (pF) IF, Forward Current (A) 2.5 40~60V 80~100V 100 200V 10 150V 1 0.1 TL, Lead Temperature (°C) 1000 TJ = 125°C TJ = 150°C 100 TJ = 75°C 10 40~60V 1 TJ = 25°C 0.1 20 40 60 80 TJ = 150°C 80~100V 1000 100 TJ = 125°C 10 TJ = 75°C 1 0.1 0.01 TJ = 25°C 0.001 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Percent of Rated Peak Reverse Voltage (%) Fig.4 Typical Reverse Characteristics 10 10000 150~200V IF, Forward Current (A) IR, Reverse Current (mA) 100 10000 100 Fig.3 Typical Reverse Characteristics 10 Fig.2 Typical Junction Capacitance IR, Reverse Current (mA) IR, Reverse Current (mA) Fig.1 Forward Current Derating Curve 10000 1 VR, Reverse Bias Voltage (V) TJ = 150°C 1000 100 TJ = 125°C 10 1 TJ = 75°C 0.1 TJ = 25°C 0.01 0.001 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.5 Typical Reverse Characteristics December 29,2016-REV.10 40~60V TJ = 150°C 1 TJ = 125°C TJ = 75°C 0.1 TJ = 25°C 0.01 0 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.6 Typical Forward Characteristics PAGE . 2 10 IF, Forward Current (A) IF, Forward Current (A) BR24~BR220 80~100V TJ = 150°C 1 TJ = 75°C TJ = 125°C 0.1 TJ = 25°C 150~200V TJ = 150°C 1 TJ = 75°C TJ = 125°C 0.1 TJ = 25°C 0.01 0.01 0 0.2 0.4 0.6 0.8 1 0 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) VF, Forward Voltage (V) Fig.7 Typical Forward Characteristics Percent of Reverse Voltage (%) 10 Fig.8 Typical Forward Characteristics 120 100 80 60 40 20 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.9 Operating Temperature Derating Curve December 29,2016-REV.10 PAGE . 3 BR24~BR220 MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 7.5K per 13" plastic Reel T/R - 1.8K per 7" plastic Reel December 29,2016-REV.10 PAGE . 4 BR24~BR220 Part No_packing code_Version BR24_R1_00001 BR24_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING December 29,2016-REV.10 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 BR24~BR220 Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. December 29,2016-REV.10 PAGE . 6