BSS138_R1_00001

BSS138 50V N-Channel Enhancement Mode MOSFET - ESD Protected FEATURES 0.006(0.15)MIN. • RDS(ON), VGS@10V,IDS@500mA=3Ω • RDS(ON), VGS@4.5V,IDS@200mA=4Ω 0.120(3.04) • RDS(ON), VGS@2.5V,IDS@100mA=6Ω 0.110(2.80) • Advanced Trench Process Technology • High Density Cell Design For Ultra Low On-Resistance • Very Low Leakage Current In Off Condition 0.056(1.40) • Specially Designed for Battery Operated Systems, Solid-State Relays 0.047(1.20) Drivers : Relays, Displays, Lamps, Solenoids, Memories, etc. 0.008(0.20) 0.079(2.00) • ESD Protected 0.003(0.08) 0.070(1.80) • Lead free in compliance with EU RoHS2.0 (2011/65/EU & 2015/865/EU directive) 0.044(1.10) 0.004(0.10) • Green molding compound as per IEC61249 Std. . (Halogen Free) 0.035(0.90) 0.000(0.00) MECHANICAL DATA 0.020(0.50) 0.013(0.35) • Case: SOT-23 Package • Terminals: Solderable per MIL-STD-750,Method 2026 • Apporx. Weight: 0.0003 ounce, 0.0084 gram • Marking: 138 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted ) PA RA M E TE R S ym b o l L i mi t Uni ts D r a i n- S o ur c e V o lta g e V DS 50 V Ga te - S o ur c e V o lta g e V GS +20 V ID 300 mA ID M 2000 mA PD 350 210 mW T J ,T S TG - 5 5 to + 1 5 0 R θJ A 357 C o nti nuo us D r a i n C ur r e nt P uls e d D r a i n C ur r e nt 1) TA = 2 5 C TA = 7 5 OC Op e r a ti ng J unc ti o n a nd S to r a g e Te m p e r a tur e Ra ng e M a xi m um P o we r D i s s i p a ti o n Junction-to Ambient Thermal Resistance(PCB mounted)2 O O O C C /W Note: 1. Maximum DC current limited by the package 2. Surface mounted on FR4 board, t < 5 sec March 25,2017-REV.02 PAGE . 1 BSS138 ELECTRICALCHARACTERISTICS P a r a m e te r S ym b o l Te s t C o nd i ti o n M i n. Typ . M a x. Uni ts D ra i n-S o urc e B re a k d o wn Vo lta g e B V DSS V GS = 0 V , ID =1 0 μ A 50 - - V G a te Thr e s ho ld Vo lta g e V GS ( th) V D S =V GS , I D = 2 5 0 μ A 0 .8 - 1 .5 V R D S ( o n) VGS=2.5V , I D=100mA - 2 .8 6 .0 R D S ( o n) VGS=4.5V , I D=200mA - 1 .8 4 .0 R D S ( o n) VGS=10V , I D=500mA - 1.6 3.0 ID S S VDS=50V , V GS=0V - - 1 μA Gate Body Leakage I GS S V GS =+ 2 0 V , V D S =0 V - - +1 0 μA Forward Transconductance g fS V D S = 1 0 V , ID =2 5 0 m A 100 - - mS To ta l G a te C ha r g e Qg V D S = 2 5 V, I D =2 5 0 m A VGS=4.5V - - 1 .0 nC Tur n- On Ti m e ton - - 40 Tur n- Off Ti m e t o ff - - 150 Inp ut C a p a c i ta nc e C i ss - - 50 O utp ut C a p a c i ta nc e C oss - - 10 Re ve r s e Tra ns fe r C a p a c i ta nc e C rss - - 5 S ta ti c D ra i n-S o urc e O n-S ta te Re s i s ta nc e D ra i n-S o urc e O n-S ta te Re s i s ta nc e D ra i n-S o urc e O n-S ta te Re s i s ta nc e Ze r o G a te V o lta g e D ra i n C ur re nt Ω Dynamic VDD=30V , RL=100Ω ID=300mA , V GEN=10V RG=6Ω V D S = 2 5 V , V GS =0 V f=1 .0 M H Z ns pF S o urc e - D r a i n D i o d e D i o d e F o rwa r d Vo lta g e C o nti nuo us D i o d e F o r wa r d C ur re nt P uls e D i o d e F o rwa r d C ur re nt Switching Test Circuit V SD IS=250mA , VGS=0V - 0.82 1.2 V IS - - - 300 mA IS M - - - 2000 mA Gate Charge Test Circuit VDD VIN RL VDD VGS RL VOUT RG 1mA RG March 25,2017-REV.02 PAGE . 2 BSS138 O Typical Characteristics Curves (TA=25 C,unless otherwise noted) 1 I D-Drain-to-Source Current (A) 1.2 I D-Drain-to-Source Current (A) V GS=10V~4.0V 1.0 0.8 3.0V 0.6 0.4 0.2 0 0 1 2 3 4 VDS =10V 0.8 0.6 0.4 o TJ = 25 C 0.2 0 0 5 V DS- Drain-to-Source Voltage (V) 3 4 5 6 FIG.2- Transfer Characteristic 5 5 R DS(ON) - On Resistance ( W ) R DS(ON) - On Resistance ( W ) 2 V GS- Gate-to-Source Voltage (V) Fig. 1-TYPICAL FORWARD CHARACTERISTIC FIG.1- Output Characteristic 4 3 V GS=4.5V 2 V GS=10V 1 4 3 I D =200mA 2 I D =500mA 1 0 0 0 0.2 0.4 0.6 0.8 1 1.2 I D - Drain Current (A) FIG.3- On Resistance vs Drain Current R DS(ON) -On-Resistance(Normalized) 1 0 2 4 6 8 10 V GS - Gate-to-Source Voltage (V) FIG.4- On Resistance vs Gate to Source Voltage 1.8 1.6 VGS =10 V ID =500mA 1.4 1.2 1 0.8 0.6 -50 -25 0 25 50 75 100 125 150 T J - Junction Temperature ( OC) FIG.5- On Resistance vs Junction Temperature March 25,2017-REV.02 PAGE . 3 BSS138 March 25,2017-REV.02 PAGE . 4 BSS138 MOUNTING PAD LAYOUT SOT-23 0.035 MIN. (0.90) MIN. Unit：inch(mm) 0.078 (2.00) 0.037 (0.95) 0.043 (1.10) 0.031 MIN. (0.80) MIN. 0.043 (1.10) 0.106 (2.70) ORDER INFORMATION • Packing information T/R - 12K per 13" plastic Reel T/R - 3K per 7" plastic Reel March 25,2017-REV.02 PAGE . 5 BSS138 Part No_packing code_Version BSS138_R1_00001 BSS138_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING March 25,2017-REV.02 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 6 BSS138 Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. March 25,2017-REV.02 PAGE . 7