BX34A_R1_00001

BX34~BX320 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER 40 to 200 Volt SMA / DO-214AC 3 Ampere CURRENT FEATURES Unit：inch(mm) 0.181(4.60) • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications in order to optimize board space • Low power loss, high efficiency • High surge capacity • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard 0.062(1.60) 0.055(1.40) 0.096(2.44) 0.114(2.90) 0.098(2.50) 0.157(4.00) 0.012(0.305) 0.006(0.152) 0.078(2.00) VOLTAGE 0.010(0.26) 0.004(0.10) 0.208(5.28) MECHANICAL DATA • • • • • 0.188(4.80) Case : JEDEC DO-214AC molded plastic Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Color band denotes cathode end Standard packaging : 12mm tape (EIA-481) Weight : 0.0023 ounces, 0.0679 grams 1 0.060(1.52) 0.030(0.76) 2 Cathode Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Resistive or inductive load. PARAMETER SYMBOL BX34 BX34A BX35 BX36 BX38 BX39 BX310 BX315 BX320 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 40 45 50 60 80 90 100 150 200 V Maximum RMS Voltage VRMS 28 31. 5 35 42 56 63 70 105 140 V Maximum DC Blocking Voltage VDC 40 45 50 60 80 90 100 150 200 V Maximum Average Forward Current ( S e e f ig ur e 1 ) I F(AV) 3 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load IFSM 80 A Maximum Forward Voltage at 3A ( Note 1) VF Maximum DC Reverse Current at Rated DC Blocking Voltage TJ=25OC Maximum DC Reverse Current at Rated DC Blocking Voltage TJ=100OC Typical Thermal Resistance (Note 2) Operating Junction and Storage Temperature Range 0.7 0.74 IR 0.9 V 0.05 IR 5 mA 2 20 75 RθJL RθJA T J , T S TG 0.8 -55 to +150 -65 to +175 1 mA O C/ W O C NOTES : 1. Pulse Test with PW =300µsec, 1% Duty Cycle. 2. Mounted on P.C. Board with 8mm 2 (0.013mm thick) copper pa d are as. July 11,2018-REV.08 PAGE . 1 BX34~BX320 40V 45-200V 2.5 2.0 1.5 1.0 0 0 20 40 60 80 100 120 140 160 IR, Leakage Current (mA) AVERAGE FORWARD RECTIFIED CURRENT, A 10000 3.0 1000 TJ = 125°C TJ = 150°C 100 TJ = 75°C 10 1 180 5 LEAD TEMPERATURE, C Fig.1 Forward Current Derating Curve IR, Reverse Current (mA) IR, Leakage Current (mA) 10000 TJ = 150°C 10000 1000 TJ = 125°C 1 TJ = 75°C BX35~BX36 TJ = 25°C 10 20 30 40 50 15 20 25 30 35 40 45 Fig.2 Typical Reverse Characteristics 100000 10 10 VR, Rated Peak Reverse Voltage (V) O 100 TJ = 25°C BX34 ~BX34A 0.1 60 TJ = 150°C 1000 100 TJ = 125°C 10 TJ = 75°C 1 0.1 BX38~BX310 0.01 0.001 TJ = 25°C 20 40 60 80 100 VR, Rated Peak Reverse Voltage (V) VR, Rated Peak Reverse Voltage (V) Fig.3 Typical Reverse Characteristics Fig.4 Typical Reverse Characteristics 1000 10 TJ = 150°C IF, Forward Current (A) IR, Reverse Current (mA) 10000 100 TJ = 125°C 10 TJ = 75°C 1 BX315~BX320 0.1 0.01 20 40 TJ = 25°C 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.5 Typical Reverse Characteristics July 11,2018-REV.08 BX34 ~BX34A TJ=150°C 1 TJ=25°C TJ=125°C 0.1 0.01 TJ=75°C 0 0.2 0.4 0.6 0.8 VF, Forward Voltage (V) Fig.6 Typical Forward Characteristics PAGE . 2 BX34~BX320 10 BX35 ~BX36 IF, Forward Current (A) IF, Forward Current (A) 10 TJ=150°C 1 TJ=125°C 0.1 TJ=75°C TJ=25°C 0.01 0 0.2 0.4 0.6 0.8 TJ = 150°C 1 0.1 TJ = 25°C 0 Fig.7 Typical Forward Characteristics BX315~BX320 TJ = 150°C TJ = 75°C 0.1 TJ = 25°C 0.01 0 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) 0.6 0.8 1 90 80 8.3ms Single Half Since-Wave JEDEC Method 70 60 50 40 30 20 10 1 2 5 10 20 50 100 NO. OF CYCLE AT 60Hz Fig.9 Typical Forward Characteristics Percent of Reverse Voltage (%) 0.4 Fig.8 Typical Forward Characteristics PEAK FORWARD SURGE CURRENT, A IF, Forward Current (A) 10 TJ = 125°C 0.2 VF, Forward Voltage (V) VF, Forward Voltage (V) 1 TJ = 75°C TJ = 125°C 0.01 1 BX38~BX310 Fig.10 Maximum Non-Repetitive Surge Current 120 100 80 60 40 20 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.11 Operating Temperature Derating Curve July 11,2018-REV.08 PAGE . 3 BX34~BX320 MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 7.5K per 13" plastic Reel T/R - 1.8K per 7" plastic Reel July 11,2018-REV.08 PAGE . 4 BX34~BX320 Part No_packing code_Version BX34_R1_00001 BX34_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING July 11,2018-REV.08 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 BX34~BX320 Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. July 11,2018-REV.08 PAGE . 6