ED302S_L2_00001

PED302S~ED306S SUPERFAST RECOVERY RECTIFIERS 200~600 V Voltage 3A Current Features  Plastic package has Underwriters Laboratories Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound  Superfast recovery times-epitaxial construction.  Low forward voltage, high current capability.  Exceeds environmental standards of MIL-S-19500/228.  Hermetically sealed.  Low leakage.  High surge capability.  Lead free in compliance with EU RoHS 2011/65/EU directive.  Green molding compound as per IEC61249 Std..(Halogen Free) Mechanical Data  Case: TO-252 Molded plastic  Terminals: Solder plated, solderable per MIL-STD-750, Method 2026  Polarity: As marking  Approx. Weight: 0.0104 ounces, 0.297 grams  Marking: Part number o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER SYMBOL ED302S ED303S ED304S ED306S UNIT Maximum repetitive peak reverse voltage VRRM 200 300 400 600 V Maximum rms voltage VRMS 140 210 280 420 V VR 200 300 400 600 V Maximum dc blocking voltage Maximum average forward rectified current Peak forward surge current : 8.3ms single half sinewave superimposed on rated load Maximum forward voltage at 3A Maximum dc reverse current at rated dc blocking voltage IF(AV) 3 A IFSM 75 A VF o TJ=25 C o 0.95 1.25 1.7 V 1 A IR TJ=125 C 300 Maximum reverse recovery time TRR 35 nS Typical junction capacitance CJ 45 pF RJA 25 TJ,TSTG -55 to +150 Typical thermal resistance Operating junction and storage temperature range November 25,2014-REV.03 o C/W o C Page 1 PED302S~ED306S INSTNTANEOUS FORWARD CURRENT AMPERES AVERAGE FORWARD CURRENT, AMPERES RATING AND CHARACTERISTIC CURVES 10.0 8.0 6.0 4.0 2.0 0 0 50 150 100 O CASE TEMPERATURE, C 40 10 200V 300-400V 600V 1 O T J =25 C Pulse Width=200us .1 .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS Fig.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC Fig.1-FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES INVSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1000 O TJ= 125 C 100 O TJ= 75 C 10 1.0 0.1 O TJ= 25 C 20 40 60 80 100 85 8.3ms Single Half Since-Wave JEDEC Method 75 65 55 45 35 25 15 5 1 2 5 10 20 50 100 120 NO. OF CYCLES AT 60Hz PERCENT OF RATED PEAK INVERSE VOLTGE, VOLTS Fig.3-TYPICAL REVERSE CHARACTERISTICS Fig.4-MAXIMUM NON-REPETITIVE SURGE CURRENT 18 16 O Tj= 25 C f= 1 .0MHz Vsig = 50mVp -p CAPACITANCE, pF 14 12 10 8.0 6.0 4.0 2.0 0 0.1 1 10 100 REVERSE VOLTAGE, VOLTS Fig.5-TYPICAL JUNCTION CAPACITANCE November 25,2014-REV.03 Page 2 PED302S~ED306S MOUNTING PAD LAYOUT ORDER INFORMATION ˙Packing information T/R – 3K per 13" plastic Reel November 25,2014-REV.03 Page 3 PED302S~ED306S Part No_packing code_Version ED302S_L2_00001 ED302S_S2_00001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D November 25,2014-REV.03 Page 4 PED302S~ED306S Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. November 25,2014-REV.03 Page 5