ED506S

DATA SHEET ED502S~ED506S SUPERFAST RECOVERY RECTIFIERS VOLTAGE FEATURES • Superfast recovery times-epitaxial construction. • Low forward voltage, high current capability. • Hermetically sealed. • Low leakage. • High surge capability. • Plastic package has Underwriters Laboratories Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. • Pb free product are available : 99% Sn above can meet Rohs environment substance directive request .09 .09 (2.3) (2.3) .264(6.7) .248(6.3) .098(2.5) .082(2.1) .024(0.6) .016(0.4) 200 to 600 Volts CURRENT 6.0 Amperes TO-252 / DPAK Unit : inch (mm) .225(5.7) .209(5.3) .063(1.6) .047(1.2) • Exceeds environmental standards of MIL-S-19500/228. .216(5.5) .200(5.1) .106(2.7) .090(2.3) .032(0.8) .012(0.3) .071(1.8) .051(1.3) MECHANICALDATA Case: Molded plastic, TO-252 Terminals: Axial leads, solderable to MIL-STD-202G, Method 208 Polarity: As marking Weight: 0.015 ounces, 0.4grams. MAXUMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25OC ambient temperature unless otherwise specified. Resistive or inductive load. 60Hz. PARAMETER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current .375” (9.5mm) lead length at Tc =75OC Peak Forward Surge Current :8.3ms single half sine-wave IFSM superimposed on rated load(JEDEC method) Maximum Forward Voltage at 3.0A (Note 1) Maximum DC Reverse Current at TA=25OC at Rated DC Blocking Voltage TA = 100OC Maximum Reverse Recovery Time (Note 2 ) Maximum thermal Resistance (Note 3 ) Operating Junction and Storage Temperature Range NOTES: 1. Pulse Test with PW=300 usec, 2% Duty Cycle. 2. Reverse Recovery Tset Conditions:I F=0.5A,IR=1.0A,Irr=0.25A 3. Mounted on P.C. Board with 14mm2 (.013mm thick) copper pad areas. SYMBOL V RRM V RMS V DC IAV ED502S 200 140 200 ED503S 300 210 300 ED504S 400 280 400 5.0 ED506S 600 420 600 0.040(1.0) .02(0.5) UNITS V V V A 75 0.95 1.25 5.0 1.7 A V µA VF IR 50 Trr RΘJC TJ ,TSTG 35 9.0 - 50 to + 150 O nS C/ W O C REV.0-MAR.19.2005 PAGE . 1 RATING AND CHARACTERISTIC CURVES AVERAGE FORWARD CURRENT, AMPERES 10.0 8.0 6.0 4.0 2.0 0 0 PEAK FORWARD SURGE CURRENT, AMPERES 80 75 60 45 30 15 0 1 10 NO. OF CYCLE AT 60HZ 50 100 150 100 CASE TEMPERATURE, OC Fig.1- FORWARD CURRENT DERATING CURVE Fig.2- MAXIMUM NON - REPETITIVE SURGE CURRENT 100 INSTANTANEOUS REVERSE CURRENT, uA 10 INSTANTANEOUS FORWARD CURRENT AMPERES 40 10 200V 300-400V 600V T J =125 C O 1.0 T J =75 C O 0.1 1 T J =25 C O 0.01 T J =25 C Pulse Width=300us .1 O 0.001 0 20 40 60 80 100 120 140 .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 PERCENT OF INSTANTANEOUS REVERSE VOLTAGE,(%) INSTANTANEOUS FORWARD VOLTAGE, VOLTS Fig.3- TYPICAL REVERSE CHARACTERISTICS Fig.4- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS REV.0-MAR.19.2005 PAGE . 2