ED602CS_S2_00001

PED602CS~ED606CS SUPERFAST RECOVERY RECTIFIERS 200~600 V Voltage 6A Current Features  Plastic package has Underwriters Laboratories Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound  Superfast recovery times-epitaxial construction  Low forward voltage, high current capability  Exceeds environmental standards of MIL-S-19500/228  Hermetically sealed.  Low leakage  High surge capability  Lead free in compliance with EU RoHS 2011/65/EU directive.  Green molding compound as per IEC61249 Std..(Halogen Free) Mechanical Data  Case: TO-252 Molded plastic  Terminals: Solder plated, solderable per MIL-STD-750, Method 2026  Polarity: As marking  Approx. Weight: 0.0104 ounces, 0.297 grams  Marking: Part number o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER SYMBOL ED602CS ED603CS ED604CS ED606CS UNIT Maximum repetitive peak reverse voltage VRRM 200 300 400 600 V Maximum rms voltage VRMS 140 210 280 420 V VR 200 300 400 600 V Maximum dc blocking voltage Maximum average forward rectified current Peak forward surge current : 8.3ms single half sinewave superimposed on rated load Maximum forward voltage at 3A per diode Maximum dc reverse current at rated dc blocking voltage IF(AV) 6 A IFSM 75 A VF o TJ=25 C o Typical thermal resistance (Note 3) Operating junction and storage temperature range 1.3 1.7 V 1 A IR TJ=100 C Maximum reverse recovery time (Note 2) 0.95 300 TRR 35 RJC 9 TJ,TSTG -55 to +150 nS o C/W o C NOTES : 1. Pulse Test with PW=300 sec, 2% Duty Cycle. 2. Reverse Recovery Tset Conditions:IF=0.5A,IR=1.0A,Irr=0.25A 2 3. Mounted on P.C. Board with 14mm (0.013mm thick) copper pad areas. November 26,2014-REV.03 Page 1 PED602CS~ED606CS 10.0 8.0 6.0 4.0 2.0 0 0 50 150 100 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT, AMPERES RATING A ND CHA RA CTERISTIC CURVES 80 75 60 45 30 15 0 1 10 O CASE TEMPERATURE, C Fig.1- FORWARD CURRENT DERATING CURVE 100 NO. OF CYCLE AT 60HZ Fig.2 MAXIMUM NON-REPETITEV SURGE CURRENT INSTANTANEOUS FORWARD CURRENT AMPERES INVSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1000 O TJ= 125 C 100 O TJ= 75 C 10 1.0 O TJ= 25 C 40 10 1 O T J =25 C Pulse Width=300us .6 20 40 60 80 100 .8 1.0 1.2 1.4 1.6 1.8 2.0 120 PERCENT OF RATED PEAK INVERSE VOLTGE, VOLTS Fig.3- TYPICAL REVERSE CHARACTERISTICS November 26,2014-REV.03 300-400V 600V .1 0.1 200V INSTANTANEOUS FORWARD VOLTAGE, VOLTS Fig.4-TYPICAL INSTANTANEOUS FORWARD CHARACTREISTICS Page 2 PED602CS~ED606CS MOUNTING PAD LAYOUT ORDER INFORMATION ˙Packing information T/R – 3K per 13" plastic Reel November 26,2014-REV.03 Page 3 PED602CS~ED606CS Part No_packing code_Version ED602CS_L2_00001 ED602CS_S2_00001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D November 26,2014-REV.03 Page 4 PED602CS~ED606CS Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. November 26,2014-REV.03 Page 5