ER1001A

ER1000 THRU ER1004 SUPERFAST RECOVERY RECTIFIERS VOLTAGE: 50 to 400 Volts CURRENT: 10.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound • Exceeds environmental standards of MIL-S-19500/228 • Low power loss, high efficiency • Low forward voltage, high current capability • High surge capacity • Super fast recovery times, high voltage • Epitaxial chip construction TO-220AB .419(10.66) MAX .139(3.55) MIN .196(5.0) MAX .054(1.39) MAX MECHANICAL DATA Case: TO-220AB molded plastic Terminals: Lead, solderable per MIL-STD-202, Method 208 Polarity: As marked Mounting Position: Any Weight: 0.08 ounces, 2.24 grams .038(0.96) MAX. .177(4.5) MAX .50(12.7) MAX .269(6.85) MAX .624(15.87) MAX .025(0.65) MAX .1(2.54) .1(2.54) AC + Positive CT AC MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25OC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, Resistive or inductive load. For capacitive load, derate current by 20%. ER1000 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Recitified TC=100 C Peak Forward Surge Current, IFM (surge):8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 10.0A per element. Maximum DC Reverse Current at Rated TA=25 OC DC Blocking Voltage per element TA=125 OC Typical Junction capacitance (Note 1) Maximum Reverse Recovery Time(Note 2) Typical Junction Resistance(Note 3) RθJC Operating and Storage Temperature Range TJ O ER1001 100 70 100 10 ER1001A 150 105 150 10 ER1002 200 140 200 10 ER1003 300 210 300 10 ER1004 400 320 400 10 UNITS V V V A 50 35 50 10 75 75 75 75 75 75 A 0.95 10 500 62 35 3.0 0.95 10 500 62 35 3.0 0.95 10 500 62 35 3.0 0.95 10 500 62 35 3.0 -55 to +150 1.30 10 500 62 50 3.0 1.30 10 500 62 50 3.0 O V µA µA PF ns C/W O C NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 2. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=0.25A 3. Thermal resistance junction to CASE RATING AND CHARACTERISTIC CURVES ER1000 THRU ER1004 40 20 INSTANTANEOUS FORWARD CURRENT 12.5 AVERAGE FORWARD CURRENT 10.0 7.5 5.0 2.5 0 150 10 8 6 4 2 1.0 .8 .6 .4 .2 .1 50, 100, 150, 200V 300, 400V TJ=25 C PULSE WIDTH=200mS .6 .7 .8 .9 1.0 1.1 1.2 1.3 O 0 50 O 100 CASE TEMPERATURE, C INSTANTANEOUS FORWARD VOLTAGE, VOLTS Fig.1- FORWARD CURRENT DERATING CURVE Fig.2- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC INSTANTANEOUS REVERSE CURRENT, MILAMPERES 1000 TC = 100OC 80 PEAK FORWARD SURGE CURRENT, 100 TC = 75OC 10 TC = 25OC 1.0 70 60 50 40 30 20 10 0 1 2 5 10 20 50 100 0.1 0 100 200 300 NO. OF CYCLE AT 60HZ Fig.3- TYPICAL REVERSE CHARACTERISTIC Fig.4- MAXIMUM NON-REPETITIVE SURGE CURRENT 80 70 CAPACITANCE, pF 60 50 40 30 0 1 2 5 10 20 50 100 200 500 TJ = 25 C O REVERSE VOLTAGE, VOLTS Fig.5- TYPICAL JUNCTION CAPACITANCE