ER2A_09

ER2A~ER2J SURFACE MOUNT RECTIFIER VOLTAGE FEATURES • For surface mounted applications • High temperature metallurgically bonded-no compression contacts as found in other diode-constructed rectifiers • Glass passivated junction • Built-in strain relief • Easy pick and place • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • In compliance with EU RoHS 2002/95/EC directives 50 to 600 Volts CURRENT 2.0 Amperes MECHANICALDATA • Case: JEDEC DO-214AA molded plastic • Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity: Indicated by cathode band • Standard packaging: 16mm tape (EIA-481) • Weight: 0.0032 ounce, 0.093 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. PARAMETER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current at TL=110OC Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load(JEDEC method) Maximum Forward Voltage at 2.0A Maximum DC Reverse Current TJ=25 O C at Rated DC Blocking VoltageTJ=100 O C Maximum Reverse Recovery Time (Note 1) Typical Junction capacitance (Note 2) Typical thermal Resistance (Note 3) Operating Junction and Storage Temperature Range SYMBOL VR R M VR M S VD C IF (A V ) IF S M VF IR 0.95 1.0 150 35 25 20 -55 to +150 O ER2A 50 35 50 ER2B 100 70 100 ER2C 150 105 150 ER2D 200 140 200 2.0 50 ER2E 300 210 300 ER2G 400 280 400 ER2J 600 420 600 UNITS V V V A A 1.25 1.7 V µA ns pF C/W O trr CJ RθJL TJ ,TS T G C NOTES:1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A 2. Measured at 1 MHz and applied Vr = 4.0 volts. 3. 8.0 mm2 ( .013mm thick ) land areas. STAD-MAR.06.2009 PAGE . 1 ER2A~ER2J RATING AND CHARACTERISTIC CURVES 70 2.8 AVERAGE FORWARD RECIFIED CURRENT AMPERES 2.4 CAPACITANCE, pF 60 50 40 30 20 10 2 .0 1.6 1 .2 .8 .4 0 0 20 40 60 80 100 120 O SINGLE PHASE, HALF-WAVE, 60Hz RESISTIVE OR INDUCTIVE LOAD P.C.B MOUNTED ON 0.3 x 0.3" (8.0 x 8.0 mm)COPPER PAD AREAS TJ = 25 C f = 1.0MHZ Vsig = 50mVp-p 0.1 1 10 100 1000 O 140 160 180 0 LEAD TEMPERATURE, C REVERSE VOLTAGE, VOLTS FIG.1 MAXIMUM AVERAGE FORWARD CURRENT RATING FIG.2 TYPICAL JUNCTION CAPACITANCE 100 100 TJ= 125 C O INSTANTANEOUS FORWARD CURRENT AMPERES 1000 INVSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 50-200V 300-400V TJ= 75 C 10 O 1.0 600V 1.0 TJ= 25 C O 0.1 T J = 25 C O 0.1 20 40 60 80 100 120 .01 0 PERCENT OF RATED PEAK INVERSE VOLTGE, VOLTS 0.4 0.8 1.2 1.6 2.0 2.4 2.8 INSTANTANEOUS FORWARD VOLTAGE VOLTS FIG.3 TYPICAL REVERSE CHARACTERISTICS FIG.4 TYPICAL FORWARD CHARACTERISTICS 60 FORWARD SURGE CURRENT, AMPERES (HALF-SING WAVE) 50 40 30 20 10 0 1 8.3ms SINGLE HALF SINE-WAVE JEDC METHOD 5 10 50 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPEITIVE SURGE CURRENT STAD-MAR.06.2009 PAGE . 2 ER2A~ER2J MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.5Kper 7” plastic Reel LEGAL STATEMENT Copyright PanJit International, Inc 2009 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. STAD-MAR.06.2009 PAGE . 3