FR3B_R1_00001

PFR3A~FR3M FAST SWITCHING SURFACE MOUNT RECTIFIER 50~1000 V Voltage 3A Current Features  Plastic package has Underwriters Laboratories Flammability Classification 94V-O  For surface mounted applications in order to optimize board space  Easy pick and place  Fast Recovery times for high efficiency  Glass passivated junction o  High temperature soldering : 260 C /10 seconds at terminals  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard Mechanical Data  Case: JEDEC DO-214AB Molded plastic  Terminals: Solder plated, solderable per MIL-STD-750, Method 2026  Polarity: Color band denotes cathode end  Standard packaging:16mm tape(EIA-481)  Approx. Weight: 0.0082 ounces, 0.2325 grams  Marking: Part number o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER SYMBOL FR3A FR3B FR3D FR3G FR3J FR3K FR3M UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum rms voltage VRMS 30 7 140 280 420 560 700 V VR 50 100 400 400 600 800 1000 V Maximum dc blocking voltage Maximum average forward rectified current Peak forward surge current : 8.3ms single half sine-wave superimposed on rated load Maximum forward voltage at 3A Maximum dc reverse current at rated dc blocking voltage IF(AV) 3 A IFSM 100 A VF 1.3 V o TJ=25 C 1 o TJ=125 C 200 Maximum reverse recovery time (Note 1) TRR Maximum junction capacitance (Note 2) CJ 60 RJL 15 TJ,TSTG -50 to +150 Typical thermal resistance (Note 3) Operating junction and storage temperature range A IR 150 250 500 nS pF o C/W o C NOTES : 1. Reverse Recovery Test Conditions: IF =0.5A, IR=1A, Irr=0.25A 2. Measured at 1 MHz and applied VR = 4 volts. 2 3. 8mm (0.013mm thick) land areas. May 7,2018-REV.04 Page 1 PFR3A~FR3M 10 3.0 FORWARD CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT AMPERES RATING AND CHARACTERISTIC CURVES 2.5 2.0 1.5 1.0 SINGLE PHASE, HALF-WAVE, 60 Hz RESISTIVE OR INDUCTIVE LOAD P.C.B MOUNTED NO 0.315x0.315" (8.0 x 8.0mm) COPPER PAD AREAS 0.5 1 0.1 O T A =25 C 0 0 50 100 150 0.01 0.5 0.7 O AMBIENT TEMPERATURE, C 0.9 1.1 1.3 1.5 1.7 1.9 2.1 FORWARD VOLTAGE,VOLTS FIG.1 FORWARD CURRENT DERATING CURVE FIG.2 TYPICAL FORWARD CHARACTERISTIC 100 10 O T J =25 C 1 100 10 1 500 100 50 T= 25 O C J 10 1 5 10 50 100 NO. OF CYCLES AT 60Hz REVERSE VOLTAGE, VOLTS FIG.3 TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS REVERSE CURRENT , m A PEAK FORWARD SURGE CURRENT, AMPERES CAPACITANCE,pF 1000 FIG.4 PEAK FORWARD SURGE CURRENT 1000 O TJ = 150 C 100 TJ = 100 OC 10 1.0 O TJ = 25 C 0.1 20 40 60 80 100 120 140 PERCENTAGE OF PEAK REVERSE VOLTAGE,% Fig.5-TYPICAL REVERSE CHARACTERISTIC May 7,2018-REV.04 Page 2 PFR3A~FR3M MOUNTING PAD LAYOUT ORDER INFORMATION ˙Packing information T/R – 3K per 13" plastic Reel T/R – 0.8K per 7" plastic Reel May 7,2018-REV.04 Page 3 PFR3A~FR3M Part No_packing code_Version FR3A_R1_00001 FR3A_R2_00001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1 Code 2 ~5 Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D May 7,2018-REV.04 st nd th Page 4 PFR3A~FR3M Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. May 7,2018-REV.04 Page 5