GS1004FL-AU_R1_000A1

GS1000FL-AU SERIES SURFACE GENERAL PURPOSE RECTIFIERS VOLTAGE 50 to 1000 Volt 1 Ampere CURRENT SOD-123FL Unit：inch(mm) • For surface mounted applications in order to optimize board space • Low profile package • Ideal for automated placement • High temperature soldering : 260°C /10 seconds at terminals • Glass passivated chip junction • AEC-Q101 qualified • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard 0.115(2.90) 0.106(2.70) 0.145(3.70) 0.137(3.50) 0.044(1.10) 0.031(0.80) 0.075(1.90) 0.067(1.70) FEATURES 0.044(1.10) 0.035(0.90) 0.008(0.20) 0.004(0.10) 0.030(0.75) 0.017(0.45) MECHANICAL DATA • Case: SOD-123FL, Molded plastic over passivated junction • Terminals: Solderable per MIL-STD-750, Method 2026 • Approx. Weight: 0.0006 ounces, 0.0173 grams • Standard Packaging: 8mm tape (EIA-481) • Polarity: Color band denotes cathode end 1 2 Cathode Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. PARAM ETER SY MBO L G S1000FL- AU GS1001FL- AU G S1002FL- AU GS1004FL- AU G S1006FL- AU G S1008FL- AU GS1010FL- AU UNI TS M ar king Code 1A 1B 1D 1G 1J 1K 1M M aximum Recur r ent Peak Rever se Voltag e V RRM 50 100 200 400 600 800 1000 V M aximum RM S Volt age V RM S 35 70 140 280 420 640 700 V M aximum DC Blocking Volt age V DC 50 100 200 400 600 800 1000 V M aximum Aver age Forw ard Cur r ent ( Not e 1) I F(AV) 1 A Peak O ne Cycle Sur ge For w ard Cur r ent ( no n- r epet it ive) I FSM 30 (6 0Hz) A M aximum For w ar d Volt age at 1A VF 1.1 V IR 1 50 μA CJ 4 pF M aximum DC Re ver se Cur rent at Rat ed DC Blocking Volt age T A =25 O C T A =125 O C Typical Junct ion Capacit ance at 4V, M Hz ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. PARAM ETER SY M BO L G S1000F L-AU G S1001F L-AU G S1002FL- AU G S1004FL- AU G S1006F L-AU G S1008FL- AU G S10 10FL-AU UNI TS Ty pic al T her mal Res ist anc e ( Not e 2) R θJA 65 O per at ing and St or age Temper at ur e Range T J , T S TG - 50 TO + 150 O C / W O C NOTES:1.Pulse test : 300u pulse width, 1% duty cycle. 2.Soldering land: 6mm x 6mm June 13,2017­REV.07 PAGE . 1 GS1000FL-AU SERIES June 13,2017­REV.07 PAGE . 2 GS1000FL-AU SERIES MOUNTING PAD LAYOUT SOD-123FL Unit：inch(mm) 0.167 (4.25) 0.048 (1.22) 0.122 (3.10) 0.045 (1.15) ORDER INFORMATION • Packing information T/R - 10K per 13" plastic Reel T/R - 3K per 7" plastic Reel June 13,2017­REV.07 PAGE . 3 GS1000FL-AU SERIES Part No_packing code_Version GS1000FL-AU_R1_000A1 GS1000FL-AU_R2_000A1 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Part No. Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING June 13,2017­REV.07 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 GS1000FL-AU SERIES Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. June 13,2017­REV.07 PAGE . 5