LL4148_R1_00001

LL4148 FAST SWITCHING SURFACE MOUNT DIODES 100 Volt VOLTAGE POWER 500 mWatt 0.063(1.6) • Fast switching Speed. • Surface Mount Package Ideally Suited For Automatic Insertion. • Silicon Epitaxal Planar Construction. • Lead free in compliance with EU RoHS 2011/65/EU directive MECHANICAL DATA 0.020(0.5) 0.012(0.3) • Case: Mini Melf, Glass • Terminals: Solderable per MIL-STD-750, Method 2026 • Polarity: Color band denotes cathode end • Marking: Cathode Band Only • Weight: 0.001 ounce, 0.03 gram • Packing information 0.055(1.4)DIA. FEATURES 0.020(0.5) 0.012(0.3) 0.146(3.7) 0.130(3.3) T/R - 2.5K per 7" plastic reel T/R - 10K per 13” plastic reel MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TJ =25°C unless otherwise noted) PARAMETER SYMBOL VALUE UNITS VRRM VRWM VR 75 V RMS Reverse Voltage VR(RMS) 53 V Peak Reverse Voltage VRM 100 V Maximum Average Forward Current at TA=25OC And f >50Hz I F(AV) 150 mA Surge Forward Current at t < 1s and TJ=25 OC I FSM 500 mA Power Dissipation at TA= 25OC PTOT 500 mW Maximum Forward Voltage at I F =10mA VF 1 V Maximum Leakage Current at VR=20V at VR=75V at VR=20V ,TJ= 150OC at VR=100V IR 25 5 50 100 nA μA μA μA Maximum Capacitance at VF =VR=0 CJ 4 pF Maximum Reverse Recovery Time From IF =-I R =10mA to IRR=-1mA ,VR=6V RL=100 Ω t rr 4 ns Typical Thermal Resistance RθJA 300 Junction Temperature and Storage Temperature Range TJ,TS -65 to +175 Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage O C/W O C NOTE: 1. CJ at VR=0, f=1MHZ 2. From IF=10mA to IR=1mA, VR=6Volts, RL=100Ω June 22,2016-REV.07 PAGE . 1 LL4148 RATING A ND CHARACTERISTIC CURVES A 10 2 I v=tp / T T =1/fp tp I FRM I FRM t T 10 1 V=0 V=0.1 10 V=0.2 0 V=0.3 10 -1 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 S tp Fig.1 ADMISSIBLE REPETITIVE PEAK FORWARD CURRENT VERSUS PULSE DURATION 10 4 10 3 10 2 10 1 10 0 10 -1 T J =25 C f=1KHz 10 3 10 2 10 O T A =125 C FORWARD CURRENT, mA FORWARD RESISTANCE, W O 1 O T A =25 C 10 0 10 10 -2 10 -1 10 0 10 1 10 2 -2 0 FORWARD CURRENT, mA Fig.2-DYNAMIC FORWARD RESISTANCE VERSUS FORWARD CURRENT 5.0 T J =25 O C f=1KHz 500 300 2 Fig.3 FORWARD CHARACTERISTICS CAPACITANCE, pF POWER DISSIPATION, mW 1 FORWARD VOLTAGE, VOLTS 4.0 3.0 2.0 100 1.0 0 100 AMBIENT TEMPERATURE Fig.4 DERATING CURVE June 22,2016-REV.07 200 0 2 4 6 8 1.0 REVERSE VOLTAGE, VOLTS Fig.5 TYPICAL JUNCTION CAPACITANCE PAGE . 2 LL4148 MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 10K per 13" plastic Reel T/R - 2.5K per 7" plastic Reel June 22,2016-REV.07 PAGE . 3 LL4148 Part No_packing code_Version LL4148_R1_10001 LL4148_R2_10001 For example : RB500V-40_R2_00001 Serial number Version code means HF Part No. Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING June 22,2016-REV.07 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 LL4148 Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. June 22,2016-REV.07 PAGE . 5