MB1H60AL-AU_R1_000A1

MB1H60AL-AU Surface Mount Ultra Low IR Schottky Barrier Rectifier Voltage 60 V Current 1A SOD-123FL Features  Low leakage current  Ideal for automated placement  Low power loss, high efficiency  High surge current capability  AEC-Q101 qualified  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard Mechanical Data  Case : SOD-123FL Package  Terminals : Solderable per MIL-STD-750, Method 2026  Approx. Weight : 0.0173 grams Maximum Ratings and Thermal Characteristics (TA = 25 oC unless otherwise noted) PARAMETER SYMBOL LIMIT UNITS Maximum Repetitive Peak Reverse Voltage VRRM 60 V Maximum RMS Voltage VRMS 42 V Maximum DC Blocking Voltage VDC 60 V Maximum Average Forward Current Peak Forward Surge Current : 8.3 ms Single Half SineWave Superimposed On Rated Load IF(AV) 1 A IFSM 30 A CJ 55 pF (Note 1) RθJA 200 (Note 2) RθJC 32 TJ -55~175 oC TSTG -55~175 oC Typical Junction Capacitance Measured at 1 MHZ And Applied VR = 4 V Typical Thermal Resistance Operating Junction Temperature Range Storage Temperature Range July 5,2022 MB1H60AL-AU-REV.01 oC/W Page 1 MB1H60AL-AU Electrical Characteristics (TA = 25 oC unless otherwise noted) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. - 0.6 - - - 0.75 IF = 0.5 A, TJ = 125 oC - 0.49 - IF = 1 A, TJ = 125 oC - 0.56 - VR = 48 V, TJ = 25 oC - 20 - VR = 60 V, TJ = 25 oC - - 3 VR = 60 V, TJ = 125 oC - 80 - IF = 0.5 A, TJ = 25 oC Forward Voltage Reverse Current(Note 3) VF IR IF = 1 A, TJ = 25 oC UNITS V nA uA NOTES : 1. Mounted on a FR4 PCB, single-sided copper, mini pad. 2. Mounted on a FR4 PCB, single-sided copper, with 100cm2 copper pad area. 3. Short duration pulse test used to minimize self-heating effect. July 5,2022 MB1H60AL-AU-REV.01 Page 2 MB1H60AL-AU TYPICAL CHARACTERISTIC CURVES CJ, Junction Capacitance (pF) IF, Forward Current (A) 1.2 1 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 1000 100 10 1 0 175 12 TC, Case Temperature (°C) TJ = 175°C 1 100 10 1 TJ = 100°C TJ = 125°C TJ = 150°C 0.1 0.01 TJ = 25°C 48 60 TJ = 175°C TJ = 150°C 0.1 TJ = 125°C TJ = 100°C TJ = 25°C 0.01 0.001 20 40 60 80 100 0 Fig.3 Typical Reverse Characteristics 0.2 0.4 0.6 0.8 VF, Forward Voltage (V) Percent of Rated Reverse Voltage (%) Percent of Reverse Voltage (%) 36 Fig.2 Typical Junction Capacitance IF, Forward Current (A) IR, Reverse Current (uA) Fig.1 Forward Current Derating Curve 1000 24 VR, Reverse Bias Voltage (V) Fig.4 Typical Forward Characteristics 120 100 80 60 40 20 0 0 25 50 75 100 125 150 175 TJ, Junction Temperature (°C) Fig.5 Operating Temperature Derating Curve July 5,2022 MB1H60AL-AU-REV.01 Page 3 MB1H60AL-AU Part No. Packing Code Version Part No. Packing Code Package Type Packing Type Marking Version MB1H60AL-AU_R1_000A1 SOD-123FL 3K / 7" Reel 6AL Halogen free RoHS compliant Packaging Information & Mounting Pad Layout Unit: inch(mm) SOD-123FL Pad Layout Unit: inch(mm) 0.167 (4.25) 0.044(1.10) 0.035(0.90) 0.122 (3.10) 0.048 (1.22) 0.115(2.90) 0.106(2.70) 0.044(1.10) 0.031(0.80) 0.075(1.90) 0.067(1.70) SOD-123FL Dimension 0.145(3.70) 0.137(3.50) 0.045 (1.15) 0.008(0.20) 0.004(0.10) 0.030(0.75) 0.017(0.45) July 5,2022 MB1H60AL-AU-REV.01 Page 4 MB1H60AL-AU Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. July 5,2022 MB1H60AL-AU-REV.01 Page 5