MB220_R1_00001

MB24~MB220 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE 40 to 200 Volt CURRENT 2 Ampere FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications in order to optimize board space • Low power loss,high efficiency • High surge capacity • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard MECHANICAL DATA • • • • • Case: JEDEC DO-214AA molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Standard packaging: 12mm tape (EIA-481) Weight: 0.0032 ounces, 0.092 grams 1 2 Cathode Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Resistive or inductive load. PARAMETER SYMBOL MB24 MB24A MB25 MB26 MB28 MB29 MB210 MB215 MB220 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 40 45 50 60 80 90 100 150 200 V Maximum RMS Voltage VRMS 28 31 . 5 35 42 56 63 70 105 140 V Maximum DC Blocking Voltage VDC 40 45 50 60 80 90 100 150 200 V Maximum Average Forward Current I F(AV) 2 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load IFSM 50 A Maximum Forward Voltage at 2A (Note 1) VF Maximum DC Reverse Current at Rated DC Blocking Voltage TJ=25OC IR Maximum DC Reverse Current at Rated DC Blocking Voltage TJ=100OC IR Typical Thermal Resistance (Note 2) Operating Junction and Storage Temperature Range 0.7 RθJL T J , T ST G -55 to +150 0.74 0.8 0.9 V 0.05 20 mA 1 12 -55 to +175 mA O C/ W O C NOTES : 1. Pulse Test with PW =300µsec, 1% Duty Cycle. 2. Mounted on P.C. Board with 8mm 2 (0.013mm thick) copper pa d are as. April 26,2018-REV.08 PAGE . 1 MB24~MB220 1000 CJ, Junction Capacitance(pF) 40~45V 100 50~100V 10 200V 150V 1 0 20 40 60 80 VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance Fig.1 Forward Current Derating Curve 1000 TJ = 125°C 100 10 TJ = 75°C TJ = 25°C 1 0.1 20 40 60 80 TJ = 125°C 100 10 TJ = 75°C TJ = 25°C 1 0.1 100 50~60V TJ = 150°C 1000 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics Fig.4 Typical Reverse Characteristics 1000 1000 TJ = 150°C 100 10 IR, Reverse Current (uA) IR, Reverse Current (uA) 10000 40~45V TJ = 150°C IR, Reverse Current (mA) IR, Reverse Current (mA) 10000 80~100V TJ = 125°C 1 TJ = 75°C 0.1 0.01 0.001 TJ = 25°C 20 40 60 80 100 TJ = 150°C 100 10 150~200V TJ = 125°C 1 0.1 TJ = 75°C 0.01 0.001 TJ = 25°C 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Percent of Rated Peak Reverse Voltage (%) Fig.5 Typical Reverse Characteristics Fig.6 Typical Reverse Characteristics April 26,2018-REV.08 PAGE . 2 MB24~MB220 10 10 50~60V IF, Forward Current (A) IF, Forward Current (A) 40~45V TJ = 150°C 1 TJ = 125°C TJ = 75°C 0.1 TJ = 25°C 0.01 0 0.2 0.4 0.6 TJ = 125°C TJ = 25°C 0 0.2 VF, Forward Voltage (V) 0.8 10 80~100V 150~200V IF, Forward Current (A) IF, Forward Current (A) 0.6 Fig.8 Typical Forward Characteristics 10 TJ = 150°C 1 TJ = 125°C TJ = 75°C 0.1 TJ = 25°C 0 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) TJ = 150°C 1 TJ = 125°C TJ = 75°C 0.1 TJ = 25°C 0.01 0.1 0.3 0.5 0.7 0.9 1.1 VF, Forward Voltage (V) Fig.9 Typical Forward Characteristics Percent of Reverse Voltage (%) 0.4 VF, Forward Voltage (V) Fig.7 Typical Forward Characteristics 0.01 TJ = 75°C 0.1 0.01 0.8 TJ = 150°C 1 Fig.10 Typical Forward Characteristics 120 100 80 60 40 40V 45~60V 20 0 80~200V 0 25 50 75 100 125 150 175 TJ, Junction Temperature (°C) Fig.11 Operating Temperature Derating April 26,2018-REV.08 PAGE . 3 MB24~MB220 MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.8K per 7" plastic Reel April 26,2018-REV.08 PAGE . 4 MB24~MB220 Part No_packing code_Version MB24_R1_00001 MB24_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING April 26,2018-REV.08 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 MB24~MB220 Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. April 26,2018-REV.08 PAGE . 6