MBR18AFC_R1_00001

MBR18AFC ~ MBR120AFC Series Surface Mount Schottky Barrier Rectifier Voltage 80~200 V 1A Current SMAF-C Features     Low power loss, high efficiency High surge current capability Lead free in compliance with EU RoHS 2.0 Green molding compound as per IEC 61249 standard Mechanical Data    Case : Molded plastic, SMAF-C Terminals : Solderable per MIL-STD-750, Method 2026 Approx. Weight : 0.0012 ounces, 0.034 grams Maximum Ratings and Thermal Characteristics (TA = 25oC unless otherwise noted) PARAMETER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current SYMBOL MBR18AFC MBR19AFC MBR110AFC MBR115AFC MBR120AFC UNIT VRRM 80 90 100 150 200 V VRMS 56 63 70 105 140 V VR 80 90 100 150 200 V IF(AV) 1 A IFSM 30 A Peak Forward Surge Current : 8.3 ms Single Half Sine-Wave Superimposed On Rated Load Instantaneous Forward Voltage at 1A VF Reverse Current(Note 3) IR 0.8 0.9 V 0.05 mA Typical Junction Capacitance Measured at 1 MHz And Applied CJ 50 40 30 pF VR = 4V Typical Thermal Resistance (Note 1) RθJL 19 (Note 2) RθJA 150 TJ -55 to +150 oC TSTG -55 to +150 oC Operating Junction Temperature Range Storage Temperature Range oC/W NOTES: 1. Mounted on a FR4 PCB, single-sided copper, with 48cm2 copper pad area. 2. Mounted on a FR4 PCB, single-sided copper, standard footprint 3. Short duration pulse test used to minimize self-heating effect August 26,2020 MBR18AFC_SERIES-REV.00 Page 1 MBR18AFC ~ MBR120AFC Series IF, Forward Current (A) 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 CJ, Junction Capacitance (pF) TYPICAL CHARACTERISTIC CURVES 100 80~100V 200V 10 150V 1 0.1 1000 IR, Reverse Current (μA) IR, Reverse Current (μA) 80~100V 100 TJ = 125°C 10 TJ = 150°C 1 TJ = 75°C 0.1 TJ = 25°C 0.01 0.001 20 40 60 80 150V 100 TJ = 125°C 10 TJ = 150°C 1 TJ = 75°C 0.1 TJ = 25°C 0.01 0.001 20 100 VR, Peak Reverse Voltage (V) 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics Fig.4 Typical Reverse Characteristics 1000 10 200V IF, Forward Current (A) IR, Reverse Current (μA) 100 Fig.2 Typical Junction Capacitance 1000 100 TJ = 125°C 10 TJ = 150°C 1 TJ = 75°C 0.1 0.01 TJ = 25°C 0.001 20 40 60 80 100 80~100V 1 TJ = 150°C Fig.5 Typical Reverse Characteristics TJ = 75°C TJ = 125°C 0.1 TJ = 25°C 0.01 0 Percent of Rated Peak Reverse Voltage (%) August 26,2020 10 VR, Reverse Bias Voltage (V) TL, Lead Temperature (°C) Fig.1 Forward Current Derating Curve 1 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.6 Typical Forward Characteristics MBR18AFC_SERIES-REV.00 Page 2 MBR18AFC ~ MBR120AFC Series 10 10 IF, Forward Current (A) IF, Forward Current (A) TYPICAL CHARACTERISTIC CURVES 150V 1 TJ = 150°C TJ = 75°C 0.1 TJ = 125°C TJ = 25°C 0.01 200V 1 TJ = 150°C 0.1 TJ = 25°C 0.01 0 0.2 0.4 0.6 0.8 1 0 VF, Forward Voltage (V) 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.7 Typical Forward Characteristics Percent of Reverse Voltage (%) TJ = 75°C TJ = 125°C Fig.8 Typical Forward Characteristics 120 100 80 60 40 20 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.9 Operating Temperature Derating Curve August 26,2020 MBR18AFC_SERIES-REV.00 Page 3 MBR18AFC ~ MBR120AFC Series Part No. Packing Code Version Part No. Packing Code Package Type Packing Type Marking Version MBR18AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR18 Halogen free MBR19AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR19 Halogen free MBR110AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR110 Halogen free MBR115AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR115 Halogen free MBR120AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR120 Halogen free Packaging Information & Mounting Pad Layout SMAF-C Dimension SMAF-C Pad Layout Unit: inch(mm) 0.232 (5.9) 0.063 (1.6) 0.154(3.90) 0.145(3.70) 0.085 (2.15) 0.044(1.10) 0.035(0.90) 0.010(0.25) 0.006(0.15) 0.073(1.85) 0.065(1.65) 0.103(2.60) 0.094(2.40) Unit: inch(mm) 0.169 (4.3) 0.193(4.90) 0.177(4.50) 0.038(0.95) 0.021(0.55) August 26,2020 0.038(0.95) 0.021(0.55) MBR18AFC_SERIES-REV.00 Page 4 MBR18AFC ~ MBR120AFC Series Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, noninfringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. August 26,2020 MBR18AFC_SERIES-REV.00 Page 5