MBR210AFC_R1_00001

MBR28AFC ~ MBR220AFC Series Surface Mount Schottky Barrier Rectifier Voltage 80~200 V 2A Current SMAF-C Features      Low power loss, high efficiency High surge current capability High surge capacity Lead free in compliance with EU RoHS 2.0 Green molding compound as per IEC 61249 standard Mechanical Data    Case: Molded plastic, SMAF-C Terminals: Solderable per MIL-STD-750, Method 2026 Approx. Weight: 0.0012 ounces, 0.034 grams Maximum Ratings and Thermal Characteristics (TA = 25oC unless otherwise noted) PARAMETER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current SYMBOL MBR28AFC MBR29AFC MBR210AFC MBR215AFC MBR220AFC UNIT VRRM 80 90 100 150 200 V VRMS 56 63 70 105 140 V VR 80 90 100 150 200 V IF(AV) 2 A IFSM 50 A Peak Forward Surge Current : 8.3 ms Single Half Sine-Wave Superimposed On Rated Load Instantaneous Forward Voltage at 2A VF Reverse Current(Note 3) IR 0.8 0.9 V 0.05 mA Typical Junction Capacitance Measured at 1 MHz And Applied CJ 75 60 45 pF VR = 4V Typical Thermal Resistance (Note 1) RθJL 20 (Note 2) RθJA 150 TJ -55 to +150 oC TSTG -55 to +150 oC Operating Junction Temperature Range Storage Temperature Range oC/W NOTES: 1. Mounted on 48cm2 copper pad area 2. Mounted on a FR4 PCB, single-sided copper, standard footprint 3. Short duration pulse test used to minimize self-heating effect July 4,2020 MBR28AFC_SERIES-REV.00 Page 1 MBR28AFC ~ MBR220AFC Series TYPICAL CHARACTERISTIC CURVES 2 1.5 1 0.5 0 0 25 50 75 100 125 150 1000 CJ, Junction Capacitance (pF) IF, Forward Current (A) 2.5 80~100V 100 200V 10 150V 1 0.1 Fig.1 Forward Current Derating Curve 10000 TJ = 150°C 80~100V 1000 100 TJ = 125°C 10 TJ = 75°C 1 0.1 0.01 TJ = 25°C 0.001 20 40 60 80 150~200V IR,Reverse Current (mA) IR,Reverse Current (mA) 100 Fig.2 Typical Junction Capacitance 10000 100 1 TJ = 75°C TJ = 125°C 0.1 TJ = 25°C 0.01 0 0.2 0.4 0.6 0.8 1 TJ = 25°C 0.01 0.001 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.4 Typical Reverse Characteristics IF, Forward Current (A) TJ = 150°C 1 TJ = 75°C 0.1 10 80~100V TJ = 125°C 10 100 Fig.3 Typical Reverse Characteristics TJ = 150°C 1000 Percent of Rated Peak Reverse Voltage (%) IF, Forward Current (A) 10 VR, Reverse Bias Voltage (V) TL, Lead Temperature (°C) 10 150~200V 1 TJ = 150°C TJ = 75°C TJ = 125°C 0.1 TJ = 25°C 0.01 0 VF, Forward Voltage (V) 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.5 Typical Reverse Characteristics Percent of Reverse Voltage (%) 1 Fig.6 Typical Forward Characteristics 120 100 80 60 40 20 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.7 Operating Temperature Derating Curve July 4,2020 MBR28AFC_SERIES-REV.00 Page 2 MBR28AFC ~ MBR220AFC Series Part No. Packing Code Version Part No. Packing Code Package Type Packing Type Marking Version MBR28AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR28 Halogen free MBR29AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR29 Halogen free MBR210AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR210 Halogen free MBR215AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR215 Halogen free MBR220AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR220 Halogen free Packaging Information & Mounting Pad Layout SMAF-C Dimension SMAF-C Pad Layout Unit: inch(mm) 0.232 (5.9) 0.063 (1.6) 0.154(3.90) 0.145(3.70) 0.085 (2.15) 0.044(1.10) 0.035(0.90) 0.010(0.25) 0.006(0.15) 0.073(1.85) 0.065(1.65) 0.103(2.60) 0.094(2.40) Unit: inch(mm) 0.169 (4.3) 0.193(4.90) 0.177(4.50) 0.038(0.95) 0.021(0.55) July 4,2020 0.038(0.95) 0.021(0.55) MBR28AFC_SERIES-REV.00 Page 3 MBR28AFC ~ MBR220AFC Series Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, noninfringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. July 4,2020 MBR28AFC_SERIES-REV.00 Page 4