MBR315AFC_R1_00001

MBR38AFC ~ MBR320AFC Series Surface Mount Schottky Barrier Rectifier 80~200 V Voltage 3A Current SMAF-C Features     Low power loss, high efficiency High surge current capability Lead free in compliance with EU RoHS 2.0 Green molding compound as per IEC 61249 standard Mechanical Data    Case : Molded plastic, SMAF-C Terminals : Solderable per MIL-STD-750, Method 2026 Approx. Weight : 0.0012 ounces, 0.034 grams Maximum Ratings and Thermal Characteristics (TA = 25oC unless otherwise noted) PARAMETER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current SYMBOL MBR38AFC MBR39AFC MBR310AFC MBR315AFC MBR320AFC UNIT VRRM 80 90 100 150 200 V VRMS 56 63 70 105 140 V VR 80 90 100 150 200 V IF(AV) 3 A IFSM 80 A Peak Forward Surge Current : 8.3 ms Single Half Sine-Wave Superimposed On Rated Load Instantaneous Forward Voltage at 3A VF (Note 4) IR Reverse Current 0.8 0.9 V 50 uA Typical Junction Capacitance Measured at 1 MHz And Applied CJ 20 10 85 pF VR = 4V Typical Thermal Resistance (Note 1) RθJA 150 (Note 2) RθJL 20 (Note 3) RθJC 22 TJ -55 to +150 oC TSTG -55 to +150 oC Operating Junction Temperature Range Storage Temperature Range oC/W NOTES: 1. Mounted on a FR4 PCB, single-sided copper, standard footprint 2. Mounted on a FR4 PCB, single-sided copper, with 48cm2 copper pad area 3. Mounted on a FR4 PCB, single-sided copper, with 100cm 2 copper pad area 4. Short duration pulse test used to minimize self-heating effect July 4,2020 MBR38AFC_SERIES-REV.00 Page 1 MBR38AFC ~ MBR320AFC Series 3.5 CJ, Junction Capacitance (pF) IF, Forward Current (A) TYPICAL CHARACTERISTIC CURVES 3 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 1000 80~100V 10 150V 1 0.1 Fig.1 Forward Current Derating Curve IR, Reverse Current (mA) IR, Reverse Current (mA) 100 10000 TJ = 150°C 1000 100 10 TJ = 125°C 1 80~100V TJ = 75°C 0.1 0.01 TJ = 25°C 0.001 20 40 60 80 100 TJ = 150°C 1000 100 10 TJ = 125°C 150~200V 1 TJ = 75°C 0.1 TJ = 25°C 0.01 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) VR , Peak Reverse Voltage (V) Fig.3 Typical Reverse Characteristics Fig.4 Typical Reverse Characteristics 10 10 80~100V IF, Forward Current (A) IF, Forward Current (A) 10 Fig.2 Typical Junction Capacitance 10000 TJ = 150°C 1 TJ = 25°C TJ = 125°C 0.1 TJ = 75°C 0.01 0 0.2 0.4 0.6 0.8 150~200V TJ = 150°C 1 TJ = 25°C TJ = 125°C 0.1 TJ = 75°C 0.01 1 0 VF, Forward Voltage (V) 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.6 Typical Forward Characteristics Fig.5 Typical Forward Characteristics Percent of Reverse Voltage (%) 1 VR, Reverse Bias Voltage (V) TC, Case Temperature (°C) July 4,2020 200V 100 120 100 80 60 40 20 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) MBR38AFC_SERIES-REV.00 Page 2 MBR38AFC ~ MBR320AFC Series Part No. Packing Code Version Part No. Packing Code Package Type Packing Type Marking Version MBR38AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR38 Halogen free MBR39AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR39 Halogen free MBR310AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR310 Halogen free MBR315AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR315 Halogen free MBR320AFC_R1_00001 SMAF-C 3K pcs / 7” reel MBR320 Halogen free Packaging Information & Mounting Pad Layout SMAF-C Dimension SMAF-C Pad Layout Unit: inch(mm) 0.232 (5.9) 0.063 (1.6) 0.154(3.90) 0.145(3.70) 0.085 (2.15) 0.044(1.10) 0.035(0.90) 0.010(0.25) 0.006(0.15) 0.073(1.85) 0.065(1.65) 0.103(2.60) 0.094(2.40) Unit: inch(mm) 0.169 (4.3) 0.193(4.90) 0.177(4.50) 0.038(0.95) 0.021(0.55) July 4,2020 0.038(0.95) 0.021(0.55) MBR38AFC_SERIES-REV.00 Page 3 MBR38AFC ~ MBR320AFC Series Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, noninfringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. July 4,2020 MBR38AFC_SERIES-REV.00 Page 4