MER2DMA_R2_00601

MER2DMA Surface Mount Super Fast Recovery Rectifier Voltage 200 V SMA 2A Current Features  Superfast recovery times-epitaxial construction  Low forward voltage, high current capability  Low leakage  Plastic package has Underwriters Laboratory Flammability Classification 94V-O  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard Mechanical Data  Case : SMA Package  Terminals : Solderable per MIL-STD-750, Method 2026  Polarity : Color band denotes cathode end  Approx. Weight : 0.0679 grams Maximum Ratings and Thermal Characteristics (TA = 25 oC unless otherwise noted) PARAMETER SYMBOL LIMIT UNITS Maximum Repetitive Peak Reverse Voltage VRRM 200 V Maximum RMS Voltage VRMS 140 V Maximum DC Blocking Voltage VDC 200 V Maximum Average Forward Current Peak Forward Surge Current : 8.3 ms Single Half SineWave Superimposed On Rated Load IF(AV) 2 A IFSM 60 A CJ 25 pF (Note 1) RθJA 150 (Note 2) RθJC 16 (Note 2) RθJL 20 TJ -55~175 oC TSTG -55~175 oC Typical Junction Capacitance Measured at 1 MHZ And Applied VR = 4 V Typical Thermal Resistance Operating Junction Temperature Range Storage Temperature Range April 21,2022 MER2DMA-REV.00 oC/W Page 1 MER2DMA Electrical Characteristics (TA = 25 oC unless otherwise noted) PARAMETER Forward Voltage Reverse Current SYMBOL VF IR TEST CONDITION MIN. TYP. MAX. UNITS IF = 1 A, TJ = 25 oC - 0.83 - V IF = 2 A, TJ = 25 oC - - 0.95 V IF = 1 A, TJ = 125 oC - 0.7 - V IF = 2 A, TJ = 125 oC - 0.78 - V VR = 160 V, TJ = 25 oC - 5 - nA VR = 200 V, TJ = 25 oC - - 1 VR = 200 V, TJ = 125 oC - - 40 - - 35 ns IF = 0.5 A, IR = 1 A, uA Reverse Recovery Time TRR Reverse Recovery Time TRR IF = 2 A, VR = 200 V - 17 - ns Peak Recovery Current IRRM di/dt = 300 A/uS - 3.9 - A Reverse Recovery Charge QRR TJ = 25 oC - 39 - nC Reverse Recovery Time TRR IF = 2 A, VR = 200 V - 26 - ns Peak Recovery Current IRRM di/dt = 300A/uS - 5.6 - A Reverse Recovery Charge QRR TJ = 125 oC - 83 - nC IRR = 0.25 A, TJ = 25 oC NOTES : 1. Mounted on a FR4 PCB, single-sided copper, standard footprint. 2. Mounted on a FR4 PCB, single-sided copper, with 100 cm2 copper pad area. April 21,2022 MER2DMA-REV.00 Page 2 MER2DMA CJ, Junction Capacitance (pF) TYPICAL CHARACTERISTIC CURVES IF, Forward Current (A) 2.4 2 1.6 1.2 0.8 0.4 0 0 25 50 75 100 125 150 100 10 1 0 175 40 120 160 200 VR, Reverse Bias Voltage (V) TC, Case Temperature (°C) Fig.1 Forward Current Derating Curve Fig.2 Typical Junction Capacitance 10 10 TJ = 175°C TJ = 175°C 1 IF, Forward Current (A) IR, Reverse Current (uA) 80 TJ = 150°C TJ = 125°C 0.1 TJ = 100°C 0.01 TJ = 25°C 0.001 TJ = 150°C 1 TJ = 125°C TJ = 100°C 0.1 TJ = 25°C TJ = -55°C 0.01 0.0001 10 20 30 40 50 60 70 80 0.2 90 100 0.4 0.6 0.8 1 1.2 VF, Forward Voltage (V) Percent of Rated Reverse Voltage (%) Fig.3 Typical Reverse Characteristics Fig.4 Typical Forward Characteristics 100 QRR (nC) TRR (nS) 100 IF=2A VR=200V TJ = 125°C IF=2A VR=200V TJ = 125°C 10 50 100 10 150 200 250 300 50 Fig.5 Typical Reverse Recovery Time Versus di/dt April 21,2022 100 150 200 250 300 di/dt (A/uS) di/dt (A/uS) Fig.6 Typical Reverse Recovery Charge Versus di/dt MER2DMA-REV.00 Page 3 MER2DMA Part No. Packing Code Version Part No. Packing Code Package Type Packing Type Marking Version MER2DMA_R2_00601 SMA 7.5K pcs / 13” reel MER2DA Halogen free RoHS compliant Packaging Information & Mounting Pad Layout SMA Dimension April 21,2022 Unit: inch(mm) SMA Pad Layout MER2DMA-REV.00 Unit: inch(mm) Page 4 MER2DMA Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. April 21,2022 MER2DMA-REV.00 Page 5