MMSZ5230B-AU_R1_000A1

PE1403S8Q Ultra Low Capacitance ESD Protection Voltage 3.3 V DFN3810-9L Unit: inch(mm) Features         IEC61000-4-2(ESD) ：±18kV Air, ±15kV Contact IEC61000-4-4(EFT)：40A(5/50ns) IEC61000-4-5(Lightning)：3A(8/20μS) Low leakage current, maximum of 50nA at rated voltage Ultra low capacitance Low clamping voltage Lead free in compliance with EU RoHS 2.0 Green molding compound as per IEC 61249 standard Mechanical Data   Case: DFN3810-9L, Plastic Approx. Weight: 0.0002 ounces, 0.005 grams Applications      USB Type-C Interface HDMI Interface 2.0 version V-By-One Interface LVDS Interface Display Port Interface (TOP VIEW)FIG.226 Maximum Ratings PARAMETER ESD IEC61000-4-2(Air) ESD IEC61000-4-2(Contact) Operating Junction Temperature Range Storage Temperature Range May 15,2017-REV.00 SYMBOL VESD TJ TSTG VALUE ±18 ±15 UNITS kV -55 to +150 o -55 to +150 o C C Page 1 PE1403S8Q Electrical Characteristics PARAMETER Reverse Stand-Off Voltage SYMBOL (Note 1) Reverse Breakdown Voltage Reverse Leakage Current Clamping Voltage Clamping Voltage TLP MIN. TYP. MAX. UNITS - - - 3.3 V VBR IBR=1mA 4 - - V IR VR=3.3V - - 50 nA IPP=1A, tP=8/20s - - 9 V IPP=3A, tP=8/20s - - 13 V IPP=8A, tP=100ns - 15 - V IPP=16A, tP=100ns - 22 - V tP=100ns - 0.88 -  - - 0.4 pF - - 0.2 pF VRWM VCL (Note 2) Dynamic Resistance VCL RDYN TEST CONDITION 0Vdc Bias f=1MHz, Off State Junction Capacitance CJ any I/O pins to GND 0Vdc Bias f=1MHz, Between any I/O pins Note： 1. A transient suppressor is selected according to the working peak reverse voltage(V RWM), which should be equal to or greater than the DC or continuous peak operation voltage level. 2. Testing using Transmission Line Pulse (TLP) conditions: Z0 = 50Ω, t P = 100 ns. May 15,2017-REV.00 Page 2 PE1403S8Q 16 0.5 IO to GND 0.3 IO to IO 0.2 0.1 12 10 8 6 4 2 0 0 0.0 0.5 1.0 1.5 2.0 0 2.5 5 VR, Reverse Bias Voltage (V) 10 15 20 25 TLP Volatge (V) Fig.1 Typical Junction Capacitance Fig.2 Transmission Line Pulsing (TLP) Measurement 12 100 IO to GND 10 90 Percent of IPP VC,Clamping Voltage (V) IO to GND 14 0.4 TLP Curent (A) CJ,Junction Capacitance (pF) TYPICAL CHARACTERISTIC CURVES 8 6 4 50% of IPP @20μs 80 70 60 50 40 30 2 20 0 10 0 1.0 1.5 2.0 2.5 IPP, Peak Current (A) Fig.3 Typical Peak Clamping Voltage(8/20s) May 15,2017-REV.00 3.0 Rise time 10-90%-8μs 0 5 10 15 20 25 30 Time, μs Fig.4 8/20s Pulse Waveform Page 3 PE1403S8Q Part No Packing Code Version Part No Packing Code Package Type Packing Type Marking Version PE1403S8Q_R1_00001 DFN3810-9L 3K pcs / 7” reel 1403 Halogen free Mounting Pad Layout Notes：This pad layout is for reference purposes only. May 15,2017-REV.00 Page 4 PE1403S8Q Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. May 15,2017-REV.00 Page 5